首页 | 官方网站   微博 | 高级检索  
     

救生舱水密及承压性能数值模拟与试验研究
引用本文:牛继平,金龙哲,平玉成.救生舱水密及承压性能数值模拟与试验研究[J].中国安全生产科学技术,2015,11(3):73-78.
作者姓名:牛继平  金龙哲  平玉成
作者单位:(北京科技大学 土木与环境工程学院,北京100083)
摘    要:透水事故是井下常发灾害之一。为满足井下紧急避险要求,救生舱不仅要具备持续耐高水压的能力,而且还需保持良好的水密性。为了检验救水舱的水密及承压性能,应用ANSYS模拟软件对舱体应力变化进行了数值模拟,确定了舱体应力值可能偏大的区域,进而选定了现场试验应变监测点;通过水压试验中心现场试验,制定详细升压方案,观察及分析试验现场和试验应变数据。实验结果表明,救生舱在外界水压达到3MPa的情况下,舱体未发生渗漏及明显变形,救生舱水密及承压性能良好。

关 键 词:救生舱  数值模拟  水压试验  承压性能  应变监测

Numerical simulation and experimental research on water-tightness and pressure bearing performance of mine refuge chamber
NIU Ji-ping,JIN Long-zhe,PING Yu-cheng.Numerical simulation and experimental research on water-tightness and pressure bearing performance of mine refuge chamber[J].Journal of Safety Science and Technology,2015,11(3):73-78.
Authors:NIU Ji-ping  JIN Long-zhe  PING Yu-cheng
Affiliation:(School of Civil and Environment Engineering, University of Science and Technology Beijing, Beijing 100083, China)
Abstract:Water inrush accident is one of the most common mine disasters. In order to satisfy the requirements of underground emergency sheltering, the mine refuge chamber should not only have the ability of resistance to continuous high pressure, but also keep a good water-tightness performance. In order to examine the water-tightness and pressure bearing performance of mine refuge chamber, the ANSYS simulation software was used to simulate the stress changes of cabin. The regions with possible higher strain values of the chamber were determined, and the monitoring points of strain in field test were selected. Through the field test in hydraulic test center, a detailed pressure boost scheme was made, and the test field and measure strain data were observed and analyzed. The experimental results showed that under the external water pressure of 3MPa, there were not leakage or obvious deformation in the cabin, and the water-tightness and pressure bearing performance of mine refuge chamber was good.
Keywords:refuge chamber  numerical simulation  hydraulic testing  pressure bearing performance  strain monitoring
本文献已被 CNKI 等数据库收录!
点击此处可从《中国安全生产科学技术》浏览原始摘要信息
点击此处可从《中国安全生产科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号