Prediction of Total Sediment Load in Sand‐Bed Rivers in Korea Using Lateral Distribution Method |
| |
| Authors: | Sung‐Uk Choi Jinhwi Lee |
| |
| Affiliation: | Department of Civil and Environmental Engineering, Yonsei University, Seoul, Korea |
| |
| Abstract: | A new method for numerically predicting the total sediment load in a river is proposed. The method can be used to predict the total sediment load with information on channel geometry and slope, flow, and bed materials. The conventional method uses a 1D approach that assumes the channel has a wide rectangular shape. However, the proposed method computes depth‐averaged velocity over the width and predicts the total sediment load based on the flow computations. The new method, therefore, is expected to predict better if the flow changes significantly in the lateral direction. The proposed method was applied to three large sand‐bed rivers in Korea, where information is available regarding suspended sediment. Five formulas were tested of use in making total sediment load computations, namely Engelund‐Hansen's, Ackers‐White's, Yang's, Brownlie's, and Karim's formulas. The predicted total sediment loads are compared not only with measured data but also with results calculated using the 1D approach. Discrepancy ratios between the predicted and measured total sediment loads are given and the results are discussed. |
| |
| Keywords: | sediment transport total sediment load sand‐bed river lateral distribution method |
|
|
