Stable Isotope Probing to Confirm Field‐Scale Co‐Metabolic Biodegradation of 1,4‐Dioxane

1,4‐Dioxane, a common co‐contaminant with chlorinated solvents, is present in groundwater at Site 24 at Vandenberg Air Force Base in California. Historical use of chlorinated solvents resulted in concentrations of 1,4‐dioxane in groundwater up to approximately 2,000 μg/L. Starting in 2013, an in situ propane biosparge system operation demonstrated reductions in 1,4‐dioxane concentrations in groundwater. The work detailed herein extends the efforts of the first field demonstration to a second phase and confirms the biodegradation mechanism via use of stable isotope probing (SIP). After two months of operation, 1,4‐dioxane concentrations decreased approximately 45 to 83 percent at monitoring locations in the test area. The results of the SIP confirmed ¹³C‐enriched 1,4‐dioxane was transformed into dissolved inorganic carbon (suggesting mineralization to carbon dioxide) and incorporated into microbial biomass (likely attributed to metabolic uptake of biotransformation intermediates or of carbon dioxide).  ©2016 Wiley Periodicals, Inc.     

In Situ Remediation of 1,4‐Dioxane Using Electrical Resistance Heating

Recent regulatory changes need more challenging treatment goals for 1,4‐dioxane. However, significant treatment limitations exist in part due to the high solubility and low Henry's law constant of 1,4‐dioxane. Two case studies are reported with substantial 1,4‐dioxane concentration reductions through in situ thermal remediation via electrical resistance heating (ERH). Concentration reductions greater than 99.8 percent of 1,4‐dioxane have been observed in the field using ERH. Concentrations of 1,4‐dioxane in air and steam extracted by an ERH vapor recovery system have also been evaluated. Laboratory studies were conducted to further understand the mechanisms that enable ERH remediation of 1,4‐dioxane. Vapor liquid equilibrium studies in water and soil were conducted and utilized to develop an ERH treatment cost model for 1,4‐dioxane. Existing field data were correlated to the 1,4‐dioxane treatment cost model. Field observations and laboratory testing indicate steam stripping that occurs through ERH remediation is an effective treatment method for 1,4‐dioxane. ©2015 Wiley Periodicals, Inc.     

ART in‐well technology proves effective in treating 1,4‐dioxane contamination

A common industrial solvent additive is 1,4‐dioxane. Contamination of dissolved 1,4‐dioxane in groundwater has been found to be recalcitrant to removal by conventional, low‐cost remedial technologies. Only costly labor and energy‐intensive pump‐and‐treat remedial options have been shown to be effective remedies. However, the capital and extended operation and maintenance costs render pump‐and‐treat technologies economically unfeasible at many sites. Furthermore, pump‐and‐treat approaches at remediation sites have frequently been proven over time to merely achieve containment rather than site closure. A major manufacturer in North Carolina was faced with the challenge of cleaning up 1,4‐dioxane and volatile organic compound–impacted soil and groundwater at its site. Significant costs associated with the application of conventional approaches to treating 1,4‐dioxane in groundwater led to an alternative analysis of emerging technologies. As a result of the success of the Accelerated Remediation Technologies, LLC (ART) In‐Well Technology at other sites impacted with recalcitrant compounds such as methyl tertiarybutyl ether, and the demonstrated success of efficient mass removal, an ART pilot test was conducted. The ART Technology combines in situ air stripping, air sparging, soil vapor extraction, enhanced bioremediation/oxidation, and dynamic subsurface groundwater circulation. Monitoring results from the pilot test show that 1,4‐dioxane concentrations were reduced by up to 90 percent in monitoring wells within 90 days. The removal rate of chlorinated compounds from one ART well exceeded the removal achieved by the multipoint soil vapor extraction/air sparging system by more than 80 times. © 2005 Wiley Periodicals, Inc.     

A Multiple Lines of Evidence Framework to Evaluate Intrinsic Biodegradation of 1,4‐Dioxane

Development of a multiple lines of evidence (MLOE) framework to evaluate the intrinsic biodegradation potential of 1,4‐dioxane is vital to implementing management strategies at groundwater sites impacted by 1,4‐dioxane. A comprehensive MLOE approach was formed to provide significant evidence of natural degradation of 1,4‐dioxane comingled with tetrahydrofuran (THF) within a large, diffuse plume. State‐of‐the art molecular biological analyses and compound‐specific isotope analysis (CSIA) were employed to support more traditional approaches for data analysis (concentration trend analyses, spatial distribution, temporal changes, geochemical biodegradation attenuation indicators, plume mass estimates, and fate and transport modeling). The molecular analyses demonstrated that microorganisms capable of both metabolic and cometabolic degradation of 1,4‐dioxane were present throughout the groundwater plume, whereas the CSIA data provided supporting evidence of biodegradation. 1,4‐Dioxane biomarkers were present and abundant throughout the 1,4‐dioxane plume, and our biomarkers tracked the plume with reasonable accuracy. Evidence also suggests that THF‐driven cometabolic biodegradation as well as catabolic 1,4‐dioxane biodegradation were active at this site. These data supplemented the traditional lines of evidence approaches, which demonstrated that 1,4‐dioxane attenuation was occurring across the groundwater plume and that nondestructive physical processes alone did not account for the observed 1,4‐dioxane attenuation. This MLOE framework combining new and traditional analyses demonstrates that this site has a significant capacity for intrinsic biodegradation of 1,4‐dioxane. ©2016 Wiley Periodicals, Inc.     

Practical Perspectives of 1,4‐Dioxane Investigation and Remediation

1,4‐Dioxane (dioxane) is a contaminant of emerging concern that is classified by the U.S. Environmental Protection Agency as a likely human carcinogen. Dioxane has been used as a minor or major ingredient in many applications, and is also generated as an unwanted by‐product of industrial processes associated with the manufacturing of polyethylene, nonionic surfactants, and many consumer products (cosmetics, laundry detergents, shampoos, etc.). Dioxane is also a known stabilizer of chlorinated solvents, particularly 1,1,1‐trichloroethane, and has been commonly found comingled with chlorinated solvent plumes. Dioxane plumes at chlorinated solvent sites can complicate site closure strategies, which to date have not typically focused on dioxane. Aggressive treatment technologies have greatly advanced and are clearly capable of achieving lower parts per billion cleanup criteria using ex situ advanced oxidation processes and sorption media. In situ chemical oxidation has also been demonstrated to effectively remediate dioxane and chlorinated solvents. Other in situ remedies, such as enhanced bioremediation, phytoremediation, and monitored natural attenuation, have been studied; however, their ability to achieve cleanup levels is still somewhat questionable and is limited by co‐occurring contaminants. This article summarizes and provides practical perspectives on dioxane analysis, plume stability relative to other contaminants, and the development of investigation tools and treatment technologies.     

Integrated approach to PCE‐impacted site characterization,site management,and enhanced bioremediation

Tetrachloroethene (PCE)‐ and trichloroethene (TCE)‐impacted sites pose significant challenges even when site characterization activities indicate that biodegradation has occurred naturally. Although site‐specific, regulatory, and economic factors play roles in the remedy‐selection process, the application of molecular biological tools to the bioremediation field has streamlined the assessment of remedial alternatives and allowed for detailed evaluation of the chosen remedial technology. The case study described here was performed at a PCE‐impacted site at which reductive dechlorination of PCE and TCE had led to accumulation of cis‐dichlorethene (cis‐DCE) with concentrations ranging from approximately 10 to 100 mg/L. Bio‐Trap® samplers and quantitative polymerase chain reaction (qPCR) enumeration of Dehalococcoides spp. were used to evaluate three remedial options: monitored natural attenuation, biostimulation with HRC®, and biostimulation with HRC‐S®. Dehalococcoides populations in HRC‐S‐amended Bio‐Traps deployed in impacted wells were on the order of 10³ to 10⁴ cells/bead but were below detection limits in most unamended and HRC‐amended Bio‐Traps. Thus the in situ Bio‐Trap study identified biostimulation with HRC‐S as the recommended approach, which was further evaluated with a pilot study. After the pilot HRC‐S injection, Dehalococcoides populations increased to 10⁶ to 10⁷ cells/bead, and concentrations of cis‐DCE and vinyl chloride decreased with concurrent ethene production. Based on these results, a full‐scale HRC‐S injection was designed and implemented at the site. As with the pilot study, full‐scale HRC‐S injection promoted growth of Dehalococcoides spp. and stimulated reductive dechlorination of the daughter products cis‐DCE and vinyl chloride. © 2008 Wiley Periodicals, Inc.     

Evaluation of natural attenuation at a 1,4‐dioxane‐contaminated site

1,4‐Dioxane entered the environment as a result of historic leaks and spills in the production area at an industrial facility in the southeastern coastal plain. The areal extent of the 1,4‐dioxane plume is several hundred acres and is largely contained on the site. Land use adjacent to the plant property is primarily undeveloped (wetlands or woods) or industrial, with a small area of mixed land use (commercial/residential) to the southwest and north. The surficial aquifer is a relatively simple hydrogeologic system with well‐defined boundaries and is comprised of a 50‐ to 70‐foot‐thick deposit of alluvial/fluvial sand and gravel that overlies an aquitard in excess of 100 feet thick. A groundwater flow model, developed and calibrated using field‐measured data, was used for the fate‐and‐transport modeling of 1,4‐dioxane. The flow‐and‐transport model, combined with the evaluation of other site geochemical data, was used to support the selection of monitored natural attenuation (MNA) as the proposed groundwater remedy for the site. Since the active sources of contamination have been removed and the modeling/field data demonstrated that the plume was stable and not expanding, the proposed MNA approach was accepted and approved by the regulatory agency for implementation in 2004. Subsequent accumulated data confirm that concentrations in the 1,4‐dioxane plume are declining as predicted by the fate‐and‐transport modeling. © 2008 Wiley Periodicals, Inc.     

1,4‐Dioxane: Emerging technologies for an emerging contaminant

The synthetic chemical, 1,4‐dioxane, is classified by the U.S. Environmental Protection Agency (EPA) as a probable human carcinogen. Between 2013 and 2015, the EPA detected 1,4‐dioxane in public drinking water supplies in 45 states at concentrations up to 33 µg/L and in groundwater from releases at hazardous waste sites across the United States. Although a Federal maximum contaminant level drinking water standard has not yet been proposed, state‐specific standards and criteria are as low as 0.3 µg/L. 1,4‐Dioxane is a recalcitrant chemical in that applications of conventional treatment technologies have had limited success in reducing concentrations in water to meet current and proposed health‐protective levels. Although mainly used as a stabilizer for the solvent 1,1,1‐trichloroethane, it has been used in other industrial processes and has been detected in a variety of consumer products, such as foods, pharmaceuticals, cosmetics, and detergents. The high aqueous solubility of 1,4‐dioxane coupled with limited solubility of chlorinated solvents typically found in conjunction with 1,4‐dioxane contamination is the primary reason for its treatment challenges. In the last several years, an alternative, cost‐effective technology has been developed that has demonstrated treatment to levels significantly lower than the Federal and state‐specific goals. This article provides a Federal and state‐by‐state summary of 1,4‐dioxane‐specific drinking water and groundwater concentration criteria and qualitative comparison of the effectiveness of conventional treatment technologies compared to the effectiveness of an alternative treatment technology. A case study is also provided to present details regarding the application of an alternative treatment technology at an active groundwater remediation site in California.     

Breakthrough in 2D‐CSIA Technology for 1,4‐Dioxane

A dual isotope technology based on compound‐specific stable isotope analysis of carbon and hydrogen (2D‐CSIA) was recently developed to help identify sources and monitor in situ degradation of the contaminant 1,4‐dioxane (1,4‐D) in groundwater. Site investigation and optimized remediation have been the focus of thousands of CSIA applications completed for volatile organic contaminants (VOCs) worldwide. CSIA for the water miscible 1,4‐D, however, has been technically challenging. The most commercially available sample preparation settings “Purge and Trap” for VOC could not efficiently extract 1,4‐D out of water for a reliable CSIA measurement, especially when the concentration is below 100 μg/L. Such a high reporting limit has prevented CSIA from being used for effective site investigation and remediation monitoring at most 1,4‐D contaminated sites, where 1,4‐D is often present at very low ppb levels. This article outlines the recent breakthrough in 2D‐CSIA technology for 1,4‐D in water, reported down to ～1 μg/L for carbon, and ～10 μg/L to 20 μg/L for hydrogen using solid‐phase extraction based on EPA Method 522, and its benefit is highlighted through a case study at a 1,4‐D contaminated site. ©2016 Wiley Periodicals, Inc.     

Case Study and Retrospective: Aerobic Fixed Film Biological Treatment Process for 1,4‐Dioxane at the Lowry Landfill Superfund Site

An aerobic fixed film biological treatment system has been successfully treating recovered groundwater/landfill leachate containing 1,4‐dioxane, tetrahydrofuran (THF), and other constituents since 2003. The most likely mode of 1,4‐dioxane biotransformation is via a cometabolic pathway in the presence of THF. Pilot studies conducted during the process development phase established a design basis process loading factor of 0.6 g 1,4‐dioxane and THF (as chemical oxygen demand [COD])/g total solids per day and proved the efficacy of the process. Full‐scale design includes the use of three parallel moving bed bioreactors with effluent recycle capability. Removal efficiencies in excess of 98 percent have been documented for 1,4‐dioxane. Evolving operational challenges are associated with recent trends in 1,4‐dioxane pretreatment discharge limitations in combination with ongoing process optimization and increased influent flow rate conditions associated with seasonal precipitation patterns. ©2016 Wiley Periodicals, Inc.     

An In Situ Bioreactor for the Treatment of Petroleum Hydrocarbons in Groundwater

Two pilot tests of an aerobic in situ bioreactor (ISBR) have been conducted at field sites contaminated with petroleum hydrocarbons. The two sites differed with respect to hydrocarbon concentrations. At one site, concentrations were low but persistent, and at the other site concentrations were high enough to be inhibitory to biodegradation. The ISBR unit is designed to enhance biodegradation of hydrocarbons by stimulating indigenous microorganisms. This approach builds on existing Bio‐Sep^® bead technology, which provides a matrix that can be rapidly colonized by the active members of the microbial community and serves to concentrate indigenous degraders. Oxygen and nutrients are delivered to the bioreactor to maintain conditions favorable for growth and reproduction, and contaminated groundwater is treated as it is circulated through the bed of Bio‐Sep^® beads. Groundwater moving through the system also transports degraders released from Bio‐Sep^® beads away from the bioreactor, potentially increasing biodegradation rates throughout the aquifer. Groundwater sampling, Bio‐Traps, and molecular biological tools were used to assess ISBR performance during the two pilot tests. Groundwater monitoring indicated that contaminant concentrations decreased at both sites, and the microbial data suggested that these decreases were due to degradation by indigenous microorganisms rather than dilution or dispersion mechanisms. Taken together, these lines of evidence showed that the ISBR system effectively increased the number and activity of indigenous microbial degraders and enhanced bioremediation at the test sites. © 2013 Wiley Periodicals, Inc.     

1,4‐Dioxane Treatment Technologies

The chlorinated solvent stabilizer 1,4‐dioxane (DX) has become an unexpected and recalcitrant groundwater contaminant at many sites across the United States. Chemical characteristics of DX, such as miscibility and low sorption potential, enable it to migrate at least as far as the chlorinated solvent from which it often originates. This mobility and recalcitrance has challenged remediation professionals to redesign existing treatment systems and monitoring networks to accommodate widespread contamination. Furthermore, remediation technologies commonly applied to chlorinated solvent co‐contaminants, such as extraction and air stripping or in situ enhanced reductive dechlorination, are relatively ineffective on DX removal. These difficulties in treatment have required the industry to identify, develop, and demonstrate new and innovative technologies and approaches for both ex situ and in situ treatment of this emerging contaminant. Great strides have been made over the past decade in the development and testing of remediation technologies for removal or destruction of DX in groundwater. This article briefly summarizes the fate and transport characteristics of DX that make it difficult to treat, and presents technologies that have been demonstrated to be applicable to groundwater treatment at the field scale.  ©2016 Wiley Periodicals, Inc.     

Bench‐ and pilot‐scale applications of electrochemical peroxidation: A new remedial concept

Electrochemical peroxidation (ECP) is a proprietary process that utilizes sacrificial iron electrodes and stochiometrically balanced applications of hydrogen peroxide to efficiently destroy aqueous phase contaminants. In laboratory trials it has been successful in reducing, often to non‐detectable levels, BTEX, fuel additives, chlorinated solvents, and polychlorinated biphenyls in ground waters. The process has also been found effective in reducing the chemical and biological oxygen demand of industrial waste water. Agency‐approved pilot tests will be conducted at two gasoline spill sites during 2000 where traditional pump and treat methods have proven ineffectual because of ground water chemistry or subsurface hydrologic conditions. The ECP process utilizes a tripartite treatment strategy consisting of 1) ex situ chemical oxidation; 2) in situ oxidation by reinjection of treated water with residual oxidants at the head of the plume; and 3) reestablishment of aerobic biodegradation by alteration of subsurface redox conditions. In contrast to other in situ oxidation treatment methods, dissolved iron is derived electrochemically, negating the need for ferrous salt addition. Dilute hydrogen peroxide (3 percent) is incrementally added to maximize oxidation efficiency and eliminate safety and environmental concerns accompanying the use of highly concentrated solutions. Results of laboratory trials and the geological and geochemical considerations of upcoming pilot‐scale applications are presented. Other potential applications currently under investigation include combination with other remedial processes (e.g. permeable barriers and hydrogen release compounds) to insure complete and rapid contaminant mineralization.     

Full‐scale in‐situ biobarrier demonstration for containment and treatment of MTBE

The Naval Facilities Engineering Service Center (NFESC), Arizona State University, and Equilon Enterprises LLC are partners in an innovative Environmental Security Technology Certification Program cleanup technology demonstration designed to contain dissolved MTBE groundwater plumes. This full‐scale demonstration is being performed to test the use of an oxygenated biobarrier at Naval Base Ventura County, in Port Hueneme, California. Surprisingly, few cost‐effective in‐situ remedies are known for the cleanup of MTBE‐impacted aquifers, and remediation by engineered in‐situ biodegradation was thought to be an unlikely candidate just a few years ago. This project demonstrates that MTBE‐impacted groundwater can be remediated in‐situ through engineered aerobic biodegradation under natural‐flow conditions. With respect to economics, the installation and operation costs associated with this innovative biobarrier system are at least 50 percent lower than those of a conventional pump and treat system. Furthermore, although it has been suggested that aerobic MTBE biodegradation will not occur in mixed MTBE‐BTEX dissolved plumes, this project demonstrates otherwise. The biobarrier system discussed in this article is the largest of its kind ever implemented, spanning a dissolved MTBE plume that is over 500 feet wide. This biobarrier system has achieved an in‐situ treatment efficiency of greater than 99.9 percent for dissolved MTBE and BTEX concentrations. Perhaps of greater importance is the fact that extensive performance data has been collected, which is being used to generate best‐practice design and cost information for this biobarrier technology. © 2001 John Wiley & Sons, Inc.     

Treatment technologies for 1,4‐Dioxane: Fundamentals and field applications

1,4‐Dioxane is a synthetic industrial chemical frequently found at contaminated sites where 1,1,1‐trichloroethane was used for degreasing. It is a probable human carcinogen and has been found in groundwater at sites throughout the United States. The physical and chemical properties and behavior of 1,4‐dioxane create challenges for its characterization and treatment. It is highly mobile and has not been shown to readily biodegrade in the environment. In December 2006, the U.S. Environmental Protection Agency's Office of Superfund Remediation and Technology Innovation (OSRTI) prepared a report titled “Treatment Technologies for 1,4‐Dioxane: Fundamentals and Field Applications.” The report provides information about the chemistry of dioxane, cleanup goals, analytical methods, available treatment technologies, and site‐specific treatment performance data. The information may be useful to project managers, technology providers, consulting engineers, and members of academia faced with addressing dioxane at cleanup sites or in drinking water supplies. This article provides a synopsis of the US EPA report, which is available at http://cluin.org/542R06009 . © 2007 Wiley Periodicals, Inc.     

Oxidation of Cyclic Ethers by Alkane‐Grown Mycobacterium vaccae JOB5

In this study we investigated the cometabolic oxidation of six cyclic ethers by alkane‐grown Mycobacterium vaccae JOB5. These ethers include, among others, tetrahydrofuran (THF), 1,4‐dioxane (14D), 1,3‐dioxolane (13DO), and tetrahydropyran (THP). Cells grown on propane, n‐butane, n‐pentane, isobutane, or isopentane oxidized all six ethers. Ether‐degrading activity was inhibited by acetylene in alkane‐grown cells and was largely absent from cells grown on dextrose‐containing media. Propane competitively inhibited THF oxidation. γ‐Butyrolactone (γBL) accumulated and was also further oxidized during THF oxidation by propane‐grown cells. In contrast, no products were detected during 14D oxidation. Propane‐grown cells also rapidly oxidized 3‐hydroxytertrahydrofuran and exhibited strong hemiacetal‐oxidizing activity in an assay following methyl formate production from mixtures of methanol and formaldehyde. These observations suggest γBL is likely generated during THF oxidation through further oxidation of 2‐hydroxytetrahydrofuran. Limited growth of strain JOB5 was supported by several cyclic ethers and the corresponding lactones and diols potentially derived from these compounds. However, strain JOB5 grew more readily on 4‐hydroxybutyrate, the product of γBL hydrolysis. The ability of strain JOB5 to productively assimilate THF‐derived metabolites during growth on n‐alkanes was examined in carbon‐limited batch cultures. Relative to C‐limited growth on n‐pentane alone, culture growth increased up to twofold in the presence of THF while no stimulation of growth was observed in comparable experiments conducted with n‐pentane and 14D. Our results are discussed in terms of their significance to our understanding of cyclic ether cometabolism and their potential impact on approaches for cyclic ether biodegradation in the environment. © 2013 Wiley Periodicals, Inc.     

The Use of Zero‐Valent Iron (ZVI) Technology to Promote DDT and Dieldrin Degradation at Point Pelee National Park

Point Pelee National Park (PPNP) is highly contaminated with dichlorodiphenyltrichloroethane (DDT) and dieldrin due to the historical use of these two persistent organochlorine pesticides. Zero‐valent iron (ZVI) technology with and without amendments has been successfully used in the past to promote organochlorine pesticides degradation in several locations in North America and Europe. In this study, the use of two commercially available ZVI products, DARAMEND^® and EHC^®, to promote DDT and dieldrin degradation in PPNP's soil and groundwater were investigated. DARAMEND^® was applied to PPNP's soil in a laboratory experiment and in an in situ pilot‐scale plot. In both cases, DARAMEND^® did not significantly increase DDT or dieldrin degradation in treated soils. The effectiveness of EHC^® was tested in a laboratory experiment that simulated the park's groundwater environment using PPNP's pesticide contaminated soil. The result was consistent with the one reported for DARAMEND^®, in that there was no significant increase in DDT or dieldrin degradation in any of the samples treated with EHC^®. These results demonstrate that both of these ZVI commercially available products are not suitable for in situ remediation at PPNP.  ©2017 Wiley Periodicals, Inc.     

TCE plume remediation via ISCR‐enhanced bioremediation utilizing EHC® and KB‐1®

Groundwater below an operating manufacturing facility in Portland, Oregon, was impacted by chlorinated volatile organic compounds (CVOCs), with concentrations indicative of a dense, nonaqueous‐phase liquid (DNAPL) release. The downgradient plume stretched under the adjacent Willamette River, intersecting zones of legacy impacts from a former manufactured gas plant (MGP). An evaluation of source‐area and downgradient plume treatment remedies identified in situ bioremediation as most likely to be effective for the CVOC plume, while leaving the legacy impacts for other responsible parties. With multiple commercially available products to choose from, the team developed and implemented a bench test to identify the most appropriate technology, which was further evaluated in a field pilot study. The results of the testing demonstrated conclusively that bioremediation enhanced by in situ chemical reduction (ISCR) using EHC® and KB‐1® was most appropriate for this site, providing outstanding results. The following describes the implementation and results of the tests. © 2008 Wiley Periodicals, Inc.     

Optimization and validation of enhanced biological reduction of 1,2,3‐trichloropropane in groundwater

Laboratory and field demonstration studies were conducted to assess the efficacy of enhanced biological reduction of 1,2,3‐trichloropropane (TCP) in groundwater. Laboratory studies evaluated the effects of pH and initial TCP concentrations on TCP reduction and the activity of a microbial inoculum containing Dehalogenimonas (Dhg). Laboratory results showed successful reduction at a pH of 5 to 9 with optimal reduction at 7 to 9 and at initial TCP concentrations ranging from 10 to over 10,000 micrograms per liter (μg/L). Based on findings from the laboratory study, the effects of TCP concentration, geochemical conditions, and amendment concentration on bioremediation efficacy were investigated during a field demonstration at a site with relatively low initial concentrations of TCP (< 2 μg/L). The field demonstration included injection of emulsified vegetable oil (EVO) and lactate as a carbon substrate for biostimulation, followed by bioaugmentation using the microbial inoculum containing Dhg. Post‐injection performance monitoring demonstrated reduction of TCP to below laboratory detection limits (< 0.005 μg/L) after an initial lag period of approximately six months following injections. TCP reduction was accompanied by generation of the degradation byproduct propene. A marginal increase in TCP concentrations, potentially due to an influx of upgradient aerobic groundwater containing TCP, was observed eight months after injections thereby demonstrating the sensitivity of this bioaugmentation application to changes in geochemical parameters. Despite this marginal increase, performance monitoring results indicate continued TCP biodegradation 15 months after implementation of the injection program. This demonstration suggests that enhanced biodegradation of TCP by combining biostimulation and bioaugmentation may be a promising solution to the challenges associated with remediation of TCP, even when present at low part per billion concentrations in groundwater.     

Demonstrating the In Situ Biodegradation Potential of Phenol Using Bio‐Sep® Bio‐Traps® and Stable Isotope Probing

The effect of phenol concentration on phenol biodegradation at an industrial site in the south of Wales, United Kingdom, was investigated using standard Bio‐Sep^® Bio‐Traps^® and Bio‐Traps^® coupled with stable isotope probing (SIP). Unlike many ¹³C‐amendments used in SIP studies (such as hydrocarbons) that physically and reversibly adsorb to the activated carbon component of the Bio‐Sep^® beads, phenol is known to irreversibly chemisorb to activated carbon. Bio‐Traps^® were deployed for 32 days in nine site groundwater monitoring wells representing a wide range of phenol concentrations. Bio‐Traps^® amended with ¹³C‐phenol were deployed together with non‐amended Bio‐Traps® in three wells. Quantitative polymerase chain reaction (qPCR) analysis of Bio‐Traps^® post‐deployment indicated an inhibitory effect of increasing phenol concentration on both total eubacteria and aerobic phenol‐utilizing bacteria as represented by the concentration of phenol hydroxylase gene. Despite the chemisorption of phenol to the Bio‐Sep^® beads, activated carbon stable isotope analysis showed incorporation of ¹³C into biomass and dissolved inorganic carbon (DIC) in each SIP Bio‐Trap^® indicating that chemisorbed amendments are bioavailable. However, there was a clear effect of phenol concentration on ¹³C incorporation in both biomass and DIC confirming phenol inhibition. These results suggest that physical reductions of the phenol concentrations in some areas of the plume will be required before biodegradation of phenol can proceed at a reasonable rate. © 2013 Wiley Periodicals, Inc.