Spatial patterns in wet and dry deposition of atmospheric mercury and trace elements in central Illinois,USA

An intensive 1-month atmospheric sampling campaign was conducted concurrently at eight monitoring sites in central Illinois, USA, from June 9 to July 3, 2011 to assess spatial patterns in wet and dry deposition of mercury and other trace elements. Summed wet deposition of mercury ranged from 3.1 to 5.4 μg/m² across sites for the total study period, while summed dry deposition of reactive mercury (gaseous oxidized mercury plus particulate bound mercury) ranged from 0.7 to 1.6 μg/m², with no statistically significant differences found spatially between northern and southern sites. Ratios of summed wet to summed dry mercury deposition across sites ranged from 2.2 to 4.9 indicating that wet deposition of mercury was dominant during the study period. Volume-weighted mean mercury concentrations in precipitation were found to be significantly higher at northern sites, while precipitation depth was significantly higher at southern sites. These results showed that substantial amounts of mercury deposition, especially wet deposition, occurred during the study period relative to typical annual wet deposition levels. Summed wet deposition of anthropogenic trace elements was much higher, compared to summed dry deposition, for sulfur, selenium, and copper, while at some sites summed dry deposition dominated summed wet deposition for lead and zinc. This study highlights that while wet deposition of Hg was dominant during this spring/summer-season study, Hg dry deposition also contributed an important fraction and should be considered for implementation in future Hg deposition monitoring studies.     

Responses of future air quality to emission controls over North Carolina,Part I: Model evaluation for current-year simulations

The prediction of future air quality and its responses to emission control strategies at national and state levels requires a reliable model that can replicate atmospheric observations. In this work, the Mesoscale Model (MM5) and the Community Multiscale Air Quality Modeling (CMAQ) system are applied at a 4-km horizontal grid resolution for four one-month periods, i.e., January, June, July, and August in 2002 to evaluate model performance and compare with that at 12-km. The evaluation shows skills of MM5/CMAQ that are overall consistent with current model performance. The large cold bias in temperature at 1.5 m is likely due to too cold soil initial temperatures and inappropriate snow treatments. The large overprediction in precipitation in July is due likely to too frequent afternoon convective rainfall and/or an overestimation in the rainfall intensity. The normalized mean biases and errors are ?1.6% to 9.1% and 15.3–18.5% in January and ?18.7% to ?5.7% and 13.9–20.6% in July for max 1-h and 8-h O₃ mixing ratios, respectively, and those for 24-h average PM_2.5 concentrations are 8.3–25.9% and 27.6–38.5% in January and ?57.8% to ?45.4% and 46.1–59.3% in July. The large underprediction in PM_2.5 in summer is attributed mainly to overpredicted precipitation, inaccurate emissions, incomplete treatments for secondary organic aerosols, and model difficulties in resolving complex meteorology and geography. While O₃ prediction shows relatively less sensitivity to horizontal grid resolutions, PM_2.5 and its secondary components, visibility indices, and dry and wet deposition show a moderate to high sensitivity. These results have important implications for the regulatory applications of MM5/CMAQ for future air quality attainment.     

Preliminary evaluation of the Community Multiscale Air Quality model for 2002 over the Southeastern United States

The Visibility Improvement State and Tribal Association of the Southeast (VISTAS) is one of five Regional Planning Organizations that is charged with the management of haze, visibility, and other regional air quality issues in the United States. The VISTAS Phase I work effort modeled three episodes (January 2002, July 1999, and July 2001) to identify the optimal model configuration(s) to be used for the 2002 annual modeling in Phase II. Using model configurations recommended in the Phase I analysis, 2002 annual meteorological (Mesoscale Meterological Model [MM5]), emissions (Sparse Matrix Operator Kernal Emissions [SMOKE]), and air quality (Community Multiscale Air Quality [CMAQ]) simulations were performed on a 36-km grid covering the continental United States and a 12-km grid covering the Eastern United States. Model estimates were then compared against observations. This paper presents the results of the preliminary CMAQ model performance evaluation for the initial 2002 annual base case simulation. Model performance is presented for the Eastern United States using speciated fine particle concentration and wet deposition measurements from several monitoring networks. Initial results indicate fairly good performance for sulfate with fractional bias values generally within +/-20%. Nitrate is overestimated in the winter by approximately +50% and underestimated in the summer by more than -100%. Organic carbon exhibits a large summer underestimation bias of approximately -100% with much improved performance seen in the winter with a bias near zero. Performance for elemental carbon is reasonable with fractional bias values within +/- 40%. Other fine particulate (soil) and coarse particular matter exhibit large (80-150%) overestimation in the winter but improved performance in the summer. The preliminary 2002 CMAQ runs identified several areas of enhancements to improve model performance, including revised temporal allocation factors for ammonia emissions to improve nitrate performance and addressing missing processes in the secondary organic aerosol module to improve OC performance.     

Modeling of mercury emission,transport and deposition in North America

Most studies on the atmospheric behaviour of mercury in North America have excluded a detailed treatment of natural mercury emissions. The objective of this work is to report a detailed simulation of the atmospheric mercury in a domain that covers a significant part of North America and includes not only anthropogenic mercury emissions but also those from natural sources including vegetation, soil and water.The simulations were done using a natural mercury emission model coupled with the US EPA's SMOKE/CMAQ modelling system. The domain contained 132×90 grid cells at a resolution of 36 km, covering the continental United States, and major parts of Canada and Mexico. The simulation was carried out for 2002, using boundary conditions from a global mercury model. Estimated total natural mercury emission in the domain was 230 tonnes (1 tonne=1000 kg) and the ratio of natural to anthropogenic emissions varied from 0.7 in January to 3.2 in July. Average total gaseous mercury (TGM) concentration ranged between 1 and 4 ng m⁻³. Good agreement was found between the modelled results and measurements at three Ontario sites for ambient mercury concentrations, and at 72 mercury deposition network sites in the domain for wet deposition. The correlation coefficient between the simulated and the measured values of the daily average TGM at three monitoring sites varied between 0.48 and 0.64. When natural emissions were omitted, the correlation coefficients dropped to between 0.15 and 0.40. About 335 tonnes of mercury were deposited in the domain during the simulation period but overall, it acted as a net source of mercury and contributed about 21 tonnes to the global pool. The net deposition of mercury to the Great Lakes was estimated to be about 2.4 tonnes. The estimated deposition values were similar to those reported by other researchers.     

Temporal patterns of atmospheric mercury species in northern Mississippi during 2011–2012: Influence of sudden population swings

Gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM) and particulate bound mercury (PBM) were measured on the University of Mississippi campus from July 2011 to June 2012. It is believed to be the first time that concentrations of atmospheric mercury species have been documented in northern Mississippi, and at a location with relatively large and sudden swings in population. The mean concentration (±1SD) of GEM was 1.54 ± 0.32 ng m⁻³; levels were lower and generally more stable during the winter (1.48 ± 0.22) and spring (1.46 ± 0.27) compared with the summer (1.56 ± 0.32) and fall (1.63 ± 0.42). Mean concentrations for GOM and PBM were 3.87 pg m⁻³ and 4.58 pg m⁻³, respectively; levels tended to be highest in the afternoon and lowest in the early morning hours. During the fall and spring academic semesters concentrations and variability of GOM and PBM both increased, possibly from vehicle exhaust. There were moderate negative correlations with wind speed (all species) and humidity (GOM and PBM). Backward air mass trajectory modeling for the ten highest peaks for each mercury species revealed that the majority of these events occurred from air masses that passed through the northern continental US region. Overall, this study illustrates the complexity of temporal fluctuations of airborne mercury species, even in a small town environment.     

Reconciling models and measurements to assess trends in atmospheric mercury deposition

Changes in atmospheric mercury deposition are used to evaluate the effectiveness of regulations controlling emissions. This analysis can be complicated by seemingly incongruent data from different model runs, model types, and field measurements. Here we present a case study example that describes how to identify trends in regional scale mercury deposition using best-available information from multiple data sources. To do this, we use data from three atmospheric chemistry models (CMAQ, GEOS-Chem, HYSPLIT) and multiple sediment archives (ombrotrophic bog, headwater lake, coastal salt marsh) from the Bay of Fundy region in Canada. Combined sediment and modeling data indicate that deposition attributable to US and Canadian emissions has declined in recent years, thereby increasing the relative significance of global sources. We estimate that anthropogenic emissions in the US and Canada account for 28-33% of contemporary atmospheric deposition in this region, with the rest from natural (14-32%) and global sources (41-53%).     

Scientific uncertainties in atmospheric mercury models II: Sensitivity analysis in the CONUS domain

In this study, we present the response of model results to different scientific treatments in an effort to quantify the uncertainties caused by the incomplete understanding of mercury science and by model assumptions in atmospheric mercury models. Two sets of sensitivity simulations were performed to assess the uncertainties using modified versions of CMAQ-Hg in a 36-km Continental United States domain. From Set 1 Experiments, it is found that the simulated mercury dry deposition is most sensitive to the gaseous elemental mercury (GEM) oxidation product assignment, and to the implemented dry deposition scheme for GEM and reactive gaseous mercury (RGM). The simulated wet deposition is sensitive to the aqueous Hg(II) sorption scheme, and to the GEM oxidation product assignment. The inclusion of natural mercury emission causes a small increase in GEM concentration but has little impact on deposition. From Set 2 Experiments, it is found that both dry and wet depositions are sensitive to mercury chemistry. Change in model mercury chemistry has a greater impact on simulated wet deposition than on dry deposition. The kinetic uncertainty of GEM oxidation by O₃ and mechanistic uncertainty of Hg(II) reduction by aqueous HO₂ pose the greatest impact. Using the upper-limit kinetics of GEM–O₃ reaction or eliminating aqueous Hg(II)–HO₂ reaction results in unreasonably high deposition and depletion of gaseous mercury in the domain. Removing GEM–OH reaction is not sufficient to balance the excessive mercury removal caused by eliminating the HO₂ mechanism. Field measurements of mercury dry deposition, better quantification of mercury air-surface exchange and further investigation of mercury redox chemistry are needed for reducing model uncertainties and for improving the performance of atmospheric mercury models.     

Validation of the integrated RAMS-Hg modelling system using wet deposition observations for eastern North America

Using the well-known Regional Atmospheric Modelling System (RAMS) version 4.3 an integrated system able to simulate the atmospheric mercury cycle has been developed. Basic processes of the mercury atmospheric cycle have been incorporated into the atmospheric model. The model deals with elemental Hg (Hg⁰), divalent gaseous Hg (Hg²) and particulate Hg (Hg^P). Wet deposition mechanisms used to describe the removal of Hg² and Hg^P are merged with the detailed cloud microphysical scheme in order to provide better representation of the wet deposition processes. The advantages of this approach have been examined through results intercomparison with simulated Hg wet deposition using CMAQ-Hg from previous work for two evaluation periods: 4 April–2 May 1995, and 20 June–18 July 1995. An attempt to clarify the main parameters that affect wet deposition mechanism of mercury is also made.     

Estimating contribution of precipitation scavenging of atmospheric particulate mercury to mercury wet deposition in Japan

Mercury wet deposition is dependent on both the scavenging of divalent reactive gaseous mercury (RGM) and atmospheric particulate mercury (Hg(p)) by precipitation. Estimating the contribution of precipitation scavenging of RGM and Hg(p) is important for better understanding the causes of the regional and seasonal variations in mercury wet deposition. In this study, the contribution of Hg(p) scavenging was estimated on the basis of the scavenging ratios of other trace elements (i.e., Cd, Cu, Mn, Ni, Pb and V) existing entirely in particulate form. Their wet deposition fluxes and concentrations in air, which were measured concurrently from April 2004 to March 2005 at 10 sites in Japan, were used in this estimation. The monthly wet deposition flux of mercury at each site correlated with the amount of monthly precipitation, whereas the Hg(p) concentrations in air tended to decrease during summer. There was a significant correlation (P<0.001) among the calculated monthly average scavenging ratios of trace elements, and the values in each month at each site were similar. Therefore, it is assumed the monthly scavenging ratio of Hg(p) is equivalent to the mean value of other trace elements. Using this scavenging ratio (W), the wet deposition flux (F) due to Hg(p) scavenging in each month was calculated by F=WKP, where K and P are the Hg(p) concentration and amount of precipitation, respectively. Relatively large fluxes due to Hg(p) scavenging were observed at a highly industrial site and at sites on the Japan Sea coast, which are strongly affected by the local sources and the long-range transport from the Asian continent, respectively. However, on average, at the 10 sites, the contribution of Hg(p) scavenging to the annual mercury deposition flux was 26%, suggesting that mercury wet deposition in Japan is dominated by RGM scavenging. This RGM should originate mainly from the in situ oxidation of Hg⁰ in the atmosphere.     

A screening model-based study of transport fluxes and fate of airborne mercury deposited onto catchment areas.

Dynamics of airborne mercury deposited onto catchment areas is investigated within the framework of a simulation model. Model results show that, for a particular atmospheric deposition rate, significant interannual variability in mercury transport flux in catchments is caused by climatology and corresponding differences in catchment soil loss rates; in comparison to the normal year, runoff flux increased by a factor of 2-3 for the wet year (rainfall 35% above normal) while for the dry year (rainfall 18% below normal) runoff flux decreased by factors of 5-7. The interaction of parameters describing soil type, topography and vegetation cover causes variability in both transport and emission fluxes among catchments; as soil loss rate increases by a factor of 5 due to variations in these parameters among the examined catchments, annual average transport flux increases by a factor of 3; and annual average emission flux of mercury (as Hg0) from soil to the atmosphere decreases by a factor of 2 due to the decreased levels of soil mercury associated with catchment soil loss increases. Seasonal variability of transport flux is associated with seasonal changes in precipitation and soil loss rates while seasonal changes of emission flux are primarily due to changes in soil moisture regime and temperature. Although modeled results are consistent with observational data from previous studies, they must be interpreted in a relative sense due to the screening-level character of this study.     

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation,model description and initial simulation

Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO₂ spatiotemporal variability and verify CO₂ fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO₂. This paper presents methods, input data, and initial results for CO₂ simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere–atmosphere exchange, and meteorology in regulating the spatial distribution of CO₂ near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO₂ concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO₂ fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO₂ reasonably well but with a low bias in the early morning. The spatial distribution of CO₂ was found to correlate with NOx, SO₂, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO₂ observations and understand CO₂ variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO₂ source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO₂ spatiotemporal variability and various uncertainties in the future.

Implications: Atmospheric CO₂ has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO₂ variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO₂ emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO₂ as an air pollutant.     

Contributions of global and regional sources to mercury deposition in New York State

A modeling system that includes a global chemical transport model (CTM) and a nested continental CTM (TEAM) was used to simulate the atmospheric transport, transformations and deposition of mercury (Hg). Three scenarios were used: (1) a nominal scenario, (2) a scenario conducive to local deposition and (3) a scenario conducive to long-range transport. Deposition fluxes of Hg were analyzed at three receptor locations in New York State. For the nominal scenario, the anthropogenic emission sources (including re-emission of deposited Hg) in New York State, the rest of the contiguous United States, Asia, Europe, and Canada contributed 11-1, 25-9, 13-19, 5-7, and 2-5%, respectively to total Hg deposition at these three receptors. Natural sources contributed 16-4%. The results from the local deposition and long-range transport scenarios varied only slightly from these results. However, there are still uncertainties in our understanding of the atmospheric chemistry of Hg that are likely to affect these estimates of local, regional and global contributions. Comparison of model simulation results with data from the Mercury Deposition Network suggests that local and regional contributions may currently be overestimated.     

Global circulation of atmospheric mercury: a modelling study

This paper presents a comprehensive atmospheric global and regional mercury model and its capability in describing the atmospheric cycling of mercury. This is an on-line model (integrated within the Canadian operational environmental forecasting and data assimilation system) which can be used to understand the role of meteorology in mercury cycling (atmospheric pathways), the inter-annual variability of mercury and can be evaluated against observations on global scales. This is due to the fact that the model uses a combination of actual observed and predicted meteorological state of the atmosphere at high resolution to integrate the model as opposed to the climatological approach used in existing global mercury models. The model was integrated and evaluated on global scale using only anthropogenic emissions. North to south gradients in mercury concentrations, seasonal variability, dry and wet deposition and vertical structure are well simulated by the model. The model was used to explain the observed seasonal variations in atmospheric mercury circulation. The results from this study include a global animation of surface air concentrations of total gaseous mercury for 1997.     

Modeling the atmospheric transport and deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans in North America

The atmospheric fate of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was simulated for the year 2000 in North America using a SMOKE/CMAQ-based chemical transport model that was modified for this purpose. The 1999 USEPA emission inventories of PCDD/Fs and criteria pollutants were used. The 1995 Canadian emission inventory of criteria pollutants and the 1995 Canadian area source emissions for PCDD/Fs were used with the 2000 Canadian point source emissions. Modifications to CMAQ involved coupling it with dual organic matter (OM) absorption and black carbon (BC) adsorption models to calculate PCDD/F gas–particle partitioning. The model satisfactorily reproduced the particle bound fractions at all rural sites for which there were measured data and across the whole domain, the modeled vs. measured differences in particle bound fractions were less than 20% for nearly all congeners. The model predicted ambient air PCDD/F concentrations were also consistent with measurements. Simulated deposition fluxes were within 58% of direct measurements. PCDD/F atmospheric depositions to each of the Great Lakes were estimated for the year 2000. The results indicate that approximately 76% of the total deposition of PCDD/Fs to the Great Lakes (in W-TEQ, or toxic equivalent units as defined by the World Health Organization) is attributed to PCDD/Fs absorbed into OM in aerosol. For all of the lakes, more than 92% of all deposition is particle phase wet deposition and only 5–8% is particle phase dry deposition. Wet deposition from the gas phase is negligible. Of the 17 toxic PCDD/F congeners, the Cl_4–5DD/F compounds contribute approximately 70% to the total atmospheric deposition to the Great Lakes. The seasonal changes in the PCDD/F deposition flux track variations in ambient temperature.     

Development and application of a regional-scale atmospheric mercury model based on WRF/Chem: a Mediterranean area investigation

The emission, transport, deposition and eventual fate of mercury (Hg) in the Mediterranean area has been studied using a modified version of the Weather Research and Forecasting model coupled with Chemistry (WRF/Chem). This model version has been developed specifically with the aim to simulate the atmospheric processes determining atmospheric Hg emissions, concentrations and deposition online at high spatial resolution. For this purpose, the gas phase chemistry of Hg and a parametrised representation of atmospheric Hg aqueous chemistry have been added to the regional acid deposition model version 2 chemical mechanism in WRF/Chem. Anthropogenic mercury emissions from the Arctic Monitoring and Assessment Programme included in the emissions preprocessor, mercury evasion from the sea surface and Hg released from biomass burning have also been included. Dry and wet deposition processes for Hg have been implemented. The model has been tested for the whole of 2009 using measurements of total gaseous mercury from the European Monitoring and Evaluation Programme monitoring network. Speciated measurement data of atmospheric elemental Hg, gaseous oxidised Hg and Hg associated with particulate matter, from a Mediterranean oceanographic campaign (June 2009), has permitted the model’s ability to simulate the atmospheric redox chemistry of Hg to be assessed. The model results highlight the importance of both the boundary conditions employed and the accuracy of the mercury speciation in the emission database. The model has permitted the reevaluation of the deposition to, and the emission from, the Mediterranean Sea. In light of the well-known high concentrations of methylmercury in a number of Mediterranean fish species, this information is important in establishing the mass balance of Hg for the Mediterranean Sea. The model results support the idea that the Mediterranean Sea is a net source of Hg to the atmosphere and suggest that the net flux is ≈30 Mg year^?1 of elemental Hg.     

Long-term relationships between mercury wet deposition and meteorology

Daily-event precipitation samples collected in Underhill, VT from 1995 to 2006 were analyzed for total mercury and results suggest that there were no statistically significant changes in annual mercury wet deposition over time, despite significant emissions reductions in the Northeast United States. Meteorological analysis indicates that mercury deposition has not decreased as transport of emissions from major source regions in the Midwest and East Coast have consistently contributed to the largest observed mercury wet deposition amounts over the period. In contrast, annual volume-weighted mean (VWM) mercury concentration declined slightly over the 12-years, and a significant decrease was observed from CY 2001 to 2006. An increase in the total annual precipitation amount corresponded with the decline in annual VWM mercury concentration. Analysis suggests that the increase in precipitation observed was strongly related to changes in the amount and type of precipitation that fell seasonally, and this departure was attributed to a response in meteorological conditions to climate variability and the El Niño-Southern Oscillation (ENSO) cycle. Increased amounts of rainfall and mixed precipitation (mixture of rainfall and snowfall), particularly in the spring and fall seasons, enhanced annual precipitation amounts and resulted in declining VWM mercury concentrations during these periods. Thus, declines in concentration at the more remote Underhill site appear to be more directly linked to local scale meteorological and climatological variability than to a reduction in emissions of mercury to the atmosphere.     

Long-term investigation of atmospheric mercury contamination in Connecticut.

Atmospheric mercury was monitored from January 1997 through the end of December 1999 in eight sampling locations in Connecticut. Four sampling locations were chosen along the shores of Long Island Sound and four were chosen in interior sections of Connecticut. Sampling locations were chosen to represent both rural and urban sectors. Average concentrations of gaseous and particulate mercury were found to be 2.06 ng/m3 and 10.5 pg/m3, respectively. The weekly average wet deposition fluxes of mercury and methylmercury over the three-year sampling period were measured to be 611 and 11 microg/ha/week, respectively. Concentrations of gaseous, particulate and wet flux of mercury were found to be significantly higher in urban areas than the rural sampling locations. There was, however, no significant difference between the mean gaseous and particulate concentrations of mercury in coastal and inland sampling locations. No significant difference was observed either between the wet fluxes of total mercury in coastal and inland sampling locations and there was no spatial gradient for mercury concentration and deposition. The data of this study suggest that vehicular traffic and localized emission sources in urban areas play a significant role in determining the atmospheric concentration of mercury in Connecticut.     

Wet deposition mercury fluxes in the Canadian sub-Arctic and southern Alberta,measured using an automated precipitation collector adapted to cold regions

This paper reports mercury (Hg) concentrations and fluxes in precipitation that was collected from 2006 to 2008 at three sites in Canada: sub-Arctic boreal forest, sub-Arctic coast, and southern Alberta, using cold-adapted precipitation collectors which operated reliably at temperatures below ?30 °C during the study. The southern Alberta site (Crossfield) may be influenced by Calgary urban air, whereas the sub-Arctic coastal (Churchill, Manitoba) and boreal forest (Fort Vermilion, Alberta) sites are in more remote northern areas. Annual mean Hg concentrations in precipitation (5.0–9.2 ng L^?1) at the study sites were in the lower half of the range reported for southern Canada and the USA by the Mercury Deposition Network (MDN). But owing to typically low precipitation rates, gross wet Hg fluxes (0.54–2.0 μg m^?2 yr^?1) were among the lowest reported by MDN, with Crossfield having about twice the flux in 2007 of the other two sites. Flux was significantly correlated with precipitation, and thus was highest in summer (June–August) and lowest during winter, a pattern typical of other temperate continental locations. There was no evidence of higher wet Hg fluxes or concentrations in springtime at Churchill where atmospheric mercury depletion events (AMDEs) occur. Measured gross deposition fluxes at the study locations were ～2–8 times lower than estimated by GEOS-Chem and GRAHM atmospheric models. The largest discrepancy occurred for Churchill, which raises the question of how well Hg deposition from AMDEs is described by current models. Better agreement between measurements and models was obtained from MDN stations in Alberta and Alaska, where wet Hg fluxes were 2–10 times higher than the study sites either because of power plant emissions (Alberta), or because of high precipitation rates (Alaska).     

Mercury in lakes and lake fishes on a conservation-industry gradient in Brazil

Mercury contamination in freshwater food webs can be severe and persistent, and freshwater fish are a major source of mercury contamination in humans. Northern hemisphere studies suggest that the primary pathway by which freshwater fish accumulate mercury is the food web, and that atmospheric deposition is the primary route by which mercury enters freshwater systems. Levels of atmospheric deposition are closely linked to proximity to sources of mercury emissions. These propositions have not been tested in the southern hemisphere. In this study, we measured mercury levels at three lakes in southern Brazil and assessed relationships between mercury in precipitation, lake water, sediment and fish tissues at sites close to (industrial and suburban areas) and distant from (protected conservation area) sources of mercury emissions. We also assessed relationships between mercury in fish species and their trophic habits. Mercury concentrations in sediment and lake water did not vary among lakes. In contrast, mercury in precipitation at the study lakes increased with proximity to industrial sources. Mercury in fish tissue generally increased along the same gradient, but also varied with trophic level and preferred depth zone. Atmospheric mercury deposition to these closed lakes may be directly linked to concentrations in fish, with surface-feeding piscivorous species attaining the highest concentrations.     

Models for gas/particle partitioning,transformation and air/water surface exchange of PCBs and PCDD/Fs in CMAQ

We have added the capability to simulate polychlorinated biphenyls (PCBs) and polychlorinated dibenzo [p] dioxins and polychlorinated dibenzo-furans (PCDD/Fs) to the Community Multiscale Air Quality (CMAQ) modeling system, thus taking advantage of the latter's capability to simulate atmospheric advection, diffusion, gas-phase chemistry, cloud/precipitation, and aerosol processes. The modifications reported here include the addition to the CMAQ system of two gas/particle partitioning models options: the Junge–Pankow adsorption model and the K_OA absorption model, as well as chemical transformations and atmosphere/water surface exchange processes for these semi-volatile organics. Simulations for the purpose of model testing and validation were conducted for the years 2000 and 2002 on a domain covering most of North America. Both partitioning models give reasonable results when compared with available measurements. The model predictions of deposition and air concentrations also agree well with measurements. The modeling results also indicate that the long-range transport is important and anthropogenic emissions of PCBs and PCDD/Fs are dominant although surface exchange of PCBs may be important for some clean locations.