Phytoremediation of heavy metals by <Emphasis Type="Italic">Eichhornia crassipes</Emphasis>

Eichhornia crassipes was tested for its ability to bioconcentrate 8 toxic metals (Ag, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) commonly found in wastewater from industries. Young plants of equal size were grown hydroponically and amended with 0, 0.1, 0.3, 0.5, 1.0, 3.0, and 5.0 mM of each heavy metal individually for 21 days. The test plant had the lowest and the highest tolerance indices for Hg and Zn, respectively. A significant (P ≤ .05) reduction in biomass production was observed in metal treated plants compared with the control. All strace elements accumulated to higher concentrations in roots than in shoots. Trace element concentrations in tissues and the bioconcentration factors (BCF) were proportional to the initial concentration of individual metal in the growth medium and the duration of exposure. From a phytoremediation perspective, E. crassipes is a promising plant species for remediation of natural water bodies and/or wastewater polluted with low levels of Zn, Cr, Cu, Cd, Pb, Ag and Ni.     

Biological responses in edible crab, <Emphasis Type="Italic">Callinectes amnicola</Emphasis> that could serve as markers of heavy metals pollution

Responses of lagoon crab, Callinectes amnicola were explored as useful biological markers of heavy metal pollution. The toxicity level of the metals based on the 96-h LC50 values showed that copper with LC50 value of 0.018 mM was found to be two times more toxic than Lead (0.041 mM) against the lagoon crab, C. amnicola. The exposure of the lagoon crab to sublethal concentrations (1/100th and 1/10th of 96-h LC50 values) of Cu and Pb compound, respectively, resulted in the bioaccumulation of the test metals to varying degrees in the selected organs that were dependent on the type of metal and concentration of metal compound in the test media. The degree of metal (Cu and Pb) accumulation was generally in the following order: gills > muscle > heptopancrease. Exposure of the crabs to sublethal concentrations of the metals also caused pathological changes such as the disruption of the gill filaments and degeneration of glandular cells with multifocal areas of calcification in the hepatopancreas. A reduction in the weight of the exposed animals over a 14-day period of observation was also recorded. The significance of these results and the usefulness of the biological endpoints in monitoring programmes aimed at establishing the total environmental level of heavy metals in aquatic ecosystems were discussed.     

The fate of heavy metals in green waste composting

It has long been known that heavy metals, when in high enough concentration, have the potential to be both phytotoxic and zootoxic. Heavy metals are frequently found as contaminants in green waste. Any such waste that is subsequently segregated for composting theoretically has the potential to retain that possible contamination. To date, there have been a limited number of publications addressing this issue. Most reports have concentrated on the types of heavy metals found in compost and their acceptable levels, rather than the fate of heavy metal contaminants throughout the composting process. This investigation was aimed to identify the fate of cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb) and zinc (Zn) concentrations throughout a fourteen week composting cycle. The results of this study showed a general increase in the removal of Pb, Cu, Cr, and to a much smaller extent Zn, manifested by a decrease in their overall concentrations within the solid fraction of the final product, by 93, 49, 43, and 20 percent respectively. By contrast, there was no decrease in the overall concentration of Cd.     

Decontamination of water polluted by heavy metals with Taro (Colocasia esculenta) cultured in a hydroponic NFT system

The toxicity and bioaccumulation of two heavy metals—lead (Pb) and cadmium (Cd)—in a semi-aquatic plant, Colocasia esculenta (L. Schott), from a synthetic heavy metal solution were studied. Young plants of equal size were grown hydroponically in shallow raceways containing Hoagland medium amended with 20, 40, and 60 mg l^?1 of Pb and 2, 4, and 6 mg l^?1 of Cd. The medium containing heavy metals was allowed to flow through the raceways with a change in influent heavy metal solution on every 5th day. The experiment was continued for 20 days. A set of control raceways—one comprised of nutrient medium with heavy metal supplements, devoid of plants, and another with the plants and nutrient medium having no metal supplement—was also simultaneously run. Chlorosis in the leaves was the prominent toxicity symptom observed due to Pb and Cd on the test plants. A significant decrease in the relative growth, biomass productivity, and total chlorophyll content were noticed in the plants with an increase in concentration of metal supplement in the solution and exposure time. Both metals accumulated to higher concentrations in the roots than in shoots, suggesting that the metals were bound to the root cells and their translocation to the leaves was limited. The results of the 20-day-long experiments indicate that from a phytoremediation perspective, C. esculenta is a promising plant species for remediation of wastewater polluted with lower concentrations of Pb and Cd.     

Metal decontamination of tannery solid waste using <Emphasis Type="Italic">Tagetes patula</Emphasis> in association with saprobic and mycorrhizal fungi

A greenhouse trial was conducted to investigate the role of mycorrhizal and resistant fungi on heavy metal phytoextraction from different concentrations of tannery solid waste amended soil (10, 20, 50, and 100%) by Tagetes patula. The four treatments included were, the control (C) without any inoculum, mycorrhizal (M) inoculated with strongly mycorrhizal roots of Cynodon dactylon, fungal (F) inoculated with Trichoderma pseudokoningii and the combined inoculation with both mycorrhizal and fungal inocula (M + F). The dual inoculation increased plant biomass and phytoextraction ability of plant for metals like Cd, Cr, Cu, and Na. Plants given only fungus (F) and only mycorrhizal (M) treatment also showed significant growth rate as compared with control treatment. The statistical analysis of data indicated synergistic interaction between mycorrhizal and fungal inoculum promoting high biomass and enhanced metal phytoextraction. Thus using more than one group of rhizosphere fungi in association with a high biomass producing plant may be employed for rendering tannery solid waste free of metals.     

Evaluation of best management practice products in preventing discharge of metals: a laboratory evaluation

Heavy metal accumulation in soil poses serious environmental and health risks, as metals are carried with eroded soils. In this study, 17 different soil erosion and sediment control products were investigated for their effectiveness in controlling transport of particulate heavy metals (Cu, Zn, Pb, Cd). Among the treatments investigated, wood mulch and tackifiers were found to be the most effective in reducing total suspended solids (TSS) and total heavy metal losses. They reduced TSS to an undetectable level during short-term simulation tests. Paper mulch was the only treatment that had no significant reduction in both total metal loss and TSS. Fiber rolls, silt fences, and gravel bags were effective in reducing sediment loss. Although the netting/blanket treatments were not effective in reducing total metal discharge, they significantly reduced sediment loss compared with the control.     

Accretion of heavy metals in the catfish <Emphasis Type="Italic">Bagrus bayad</Emphasis> from Taylor Creek,southern Nigeria

Heavy metals in the aquatic environment have, to date, come essentially from naturally occurring geochemical resources. However, this has been enhanced by anthropogenic activities such as crude oil exploration and exploitation activities, resulting in pollution in the Taylor Creek aquatic ecosystem. The catfish species Bagrus bayad and other environmental segments were collected from five selected sites along Taylor Creek, southern Nigeria, and total metal concentration determined. The concentration levels of the metals in B. bayad were higher than the values reported in the literature for fresh fish and may lead to a higher risk of harmful effects. The bivariate regression models relating metals in B. bayad and metals in the surface waters were significant (R ² ≥ 0.9002). The log (bio-concentration factor; BCF) values of Cr and Zn in B. bayad were the highest, whereas the lowest was found for Ni. The ecological distribution of the log (BCF) values was, for all the heavy metals, moderately stable over the creek. All log-transformed bio-magnification factors (BMF) in the creek were positive, which indicates that the metal concentration was greater in B. bayad than in suspended particulate matter (SPM). The absolute log (BMF) values of heavy metals can, therefore, be ranked in order of decreasing magnitude: Cr (3.26) > Zn (2.99) > Cd (2.93) > Fe (2.76) > Pb (2.66) > Mn (2.36) > Ni (2.24). This sequence indicates that toxic metals such as Cd, Cr and Pb are undergoing significant bio-reduction from SPM to B. bayad. The degree of correlation between the metals was different in B. bayad, which suggests that the sources of the metals polluting Taylor Creek were diverse.     

Utilization of pulp and paper industrial wastes to remove heavy metals from metal finishing wastewater

Two pulp and paper industrial wastes, lime mud (LM) and recovery boiler ash (RB), have low moisture contents, low heavy metal contaminations and contain various carbonate compounds which contribute to a high pH. Metal finishing wastewater (MF-WW) has a low pH, high levels of TDS and high contaminations from Cr, Cu, Pb and Zn. The heavy metals from MF-WW were removed by sorption and precipitation mechanisms. LM gave better results in removing heavy metals from MF-WW than RB. At a reaction time of 45 min, the maximum removal efficiencies for Cr (93%) and Cu (99%) were obtained at 110 g L⁻¹ of LM, but at 80 g L⁻¹ for Pb (96%) and Zn (99%). Treatment with LM gives a higher sludge volume than with RB. However, the leachability of heavy metals from LM is lower. Leachability of heavy metals in the sediment for all selected treatment conditions is within government standards.     

Use of constructed wetland for the removal of heavy metals from industrial wastewater

This study was conducted to investigate the effectiveness of a continuous free surface flow wetland for removal of heavy metals from industrial wastewater, in Gadoon Amazai Industrial Estate (GAIE), Swabi, Pakistan. Industrial wastewater samples were collected from the in-let, out-let and all cells of the constructed wetland (CW) and analyzed for heavy metals such as lead (Pb), cadmium (Cd), iron (Fe), nickel (Ni), chromium (Cr) and copper (Cu) using standard methods. Similarly, samples of aquatic macrophytes and sediments were also analyzed for selected heavy metals. Results indicate that the removal efficiencies of the CW for Pb, Cd, Fe, Ni, Cr, and Cu were 50%, 91.9%, 74.1%, 40.9%, 89%, and 48.3%, respectively. Furthermore, the performance of the CW was efficient enough to remove the heavy metals, particularly Cd, Fe, and Cu, from the industrial wastewater fed to it. However, it is suggested that the metal removal efficiency of the CW can be further enhanced by using proper management of vegetation and area expansion of the present CW.     

Health risk assessment due to heavy metal exposure from commonly consumed fish and vegetables

Contamination of heavy metals in fish and vegetables is regarded as a major crisis globally, with a large share in many developing countries. In Bogra District of Bangladesh, concentrations of six heavy metals, i.e., chromium (Cr), nickel (Ni), copper (Cu), arsenic (As), cadmium (Cd) and lead (Pb), were evaluated in the most consumed vegetables and fish species. The sampling was conducted during February–March 2012 and August–September 2013. The levels of metals varied between different fish and vegetable species. Elevated concentrations of As, Cd and Pb were observed in vegetable species (Solanum tuberosum, Allium cepa and Daucus carota), and fish species (Anabas testudineus and Heteropneustes fossilis) were higher than the FAO/WHO permissible limits, indicating these three metals might pose risk from the consumption of these vegetable and fish species. The higher concentration of heavy metals in these vegetable species might be due to the higher uptake from soil and sediment ingestion behavior in fish species. Multivariate principal component analysis (PCA) showed significant anthropogenic contributions of Cr, Ni, Cu and Pb in samples as the PCA axis scores were correlated with scores of anthropogenic activities. Target hazard quotients showed that the intakes of Cu, As and Pb through vegetables and fish were higher than the recommended health standards, indicated non-carcinogenic risk. Therefore, intakes of these elements via fish and vegetables for Bangladeshi people are a matter of concern.     

柴窝堡湖表层底泥重金属污染评价

研究了乌鲁木齐市柴窝堡湖表层底泥的重金属含量,并采用Hakanson潜在生态危害指数法对底泥中的重金属潜在生态风险进行评价。结果表明:底泥中Cu、Zn、Pb、Cd含量均超出乌鲁木齐市土壤背景值。除湖心区外,Cd在5个监测区域中的潜在生态危害均为中等;其它重金属在5个采样点的潜在生态危害均为轻微。各重金属间的相关性分析表明,Zn与Cu,Pb与Cd、Cu呈显著正相关,说明这4种元素污染源可能相同。柴窝堡湖表层底泥受到Cu、Zn、Pb、Cd污染,需采取相应措施防止重金属由底泥进入水相。     

Characteristic levels of heavy metals in soil profiles of automobile mechanic waste dumps in Nigeria

The characteristic levels of heavy metals (Cd, Cr, Cu, Pb, Ni and Zn) of soil profiles of automobile mechanic waste dumps were studied. The concentration of heavy metals decreased with the depth of the profile and lateral distance from the dumpsites. The levels found in this study exceeded background concentrations and limits for agricultural and residential purposes. The distribution pattern of heavy metals in the soil profiles were in the following order Pb > Zn > Cu > Cd > Ni > Cr. The mechanic waste dumps represent potential sources of heavy metal pollution to environment. The elevated levels of heavy metals in these soil profiles constitute a serious threat to both surface and groundwater.     

Assessment of tropical suburban surface soils contamination from Jengka,Malaysia

Heavy metals in suburban soils pose both indirect and direct health risks. This study assessed the concentrations of Cr, Zn, Pb, and Cd in Jengka (Malaysia) suburban soil and estimated the human health risk. Health risk assessment (HRA) was utilized to assess non-cancer and cancer risks. The concentrations of heavy metals increased in the following order: Cd < Zn < Cr < Pb. The heavy metals were found to be divided into two components using principal component analysis (PCA), with PC1 comprising Pb and Cd and PC2 containing Zn and Cr. PC1 originates from anthropogenic sources, while PC2 is often from mixed anthropogenic and natural sources. Despite having the lowest mean concentration, Cd was enriched based on the geo-accumulation index (Igeo) and enrichment factor (EF). Average hazard index values were below the acceptable threshold (HI < 1) for dermal and inhalation pathways suggesting a low non-cancer risk. Jengka suburban soil had total lifetime cancer risk values slightly higher than the acceptable threshold (1 × 10⁻⁵). Skin contact was the most prominent contributing exposure pathway for both non-carcinogenic and carcinogenic risks. This study suggests that heavy metal bioactivity levels be used to make a plausible HRA of heavy metal pollution in suburban soils.     

Comparison of trace metal contents of sediments and mussels collected within and outside Tolo Harbour,Hong Kong

Sediments collected from Tap Mun (within Tolo Harbour) and Yim Tin Tsai (outside Tolo Harbour) were extracted sequentially and the copper, cadmium, and chromium contents were determined. Total contents of copper, cadmium, chromium, and arsenic were also detected by acid digestion. The level of heavy metal extracted was higher in sequential extraction (which extracted all forms of metal ions) than total acid digestion. Among the four heavy metals studied, only copper showed a significantly higher (P<0.001) level in samples collected from Yim Tin Tsai (16.10 mg/kg) than that from Tap Mun (3.19 mg/kg). Such a difference in copper level is mainly attributed to the significantly higher (P<0.05) levels of copper in the organic, carbonate, and sulfide forms, whereas there was no significant difference (P>0.05) in the exchangeable and sorbed forms. Green-lipped mussel (Perna viridis) samples collected from the two sites were dissected into seven parts (gill, byssus, siphon, shell, digestive gland, soft tissue, and adductor muscle) and the concentrations of copper, cadmium, chromium, and arsenic were measured. The highest concentration of copper was obtained in the byssus. A higher concentration of copper was also noted in the mussels collected from Yim Tin Tsai than those collected from Tap Mun. No specific trend was revealed for the other metals tested. Chromium and arsenic concentrations were found to be independent of the body size of the mussels. Copper had a lower concentration in larger mussels and cadmium level was found to decrease with size. In addition, the mussels collected from Tap Mun were much larger than those collected from Yim Tin Tsai.     

超声波去除农用污泥中重金属的试验研究

污水处理厂污泥中的重金属浓度高是污泥农用的主要障碍。为了降低农用污泥中的重金属含量,以Cu、Zn、Ni、Pb为对象,研究了超声波对其的影响。结果表明:超声对污泥中重金属有一定的溶出作用。当超声时间为30min时,溶解状态Cu、Zn、Ni、Pb的析出率分别为42.1%、37.5%、12.7%、14.7%;总的析出率分别为52.7%、44.7%、23.6%、71%。其中析出的Pb大部分以胶体状态存在,而溶解状态只占很少一部分。其他几种金属则以溶解状态为主。     

Dual-function growth medium and structural soil for use as porous pavement

Permeable grass-covered surfaces can reduce the quantity of storm water runoff and filter out potentially harmful chemicals. The objective of this study was to develop permeable structural soils that sustained healthy turf growth and filtered heavy metals from contaminated pavement runoff. The basic soil medium was a 50:50 mixture (v/v) of expanded shale (ExSh) and quartz sand (QS). The ExSh component consisted of (i) large-diameter particles (3-6 mm), (ii) small-diameter particles (1-3 mm), or (iii) a 50:50 mixture (v/v) of the two. The basic blends were mixed with 0, 10, and 20% sphagnum peat moss (v/v) and 0, 10, and 20% natural zeolites (v/v) and placed in 15-cm-diameter pots in a greenhouse. Bermudagrass plugs were planted in each pot. The addition of sphagnum peat moss to the basic ExSh/QS blend increased bermudagrass growth and improved plant response to added fertilizer. Zeolites had no significant effect on plant growth in the absence of sphagnum peat moss. Growing mediums that contained 10 to 20% sphagnum peat moss and 10 to 20% zeolites consistently produced more bermudagrass biomass than the unamended ExSh/QS mixture. Changing the ratio of small- to large-diameter ExSh in the basic medium did not affect bermudagrass yield. Very low amounts of Cd, Cu, Pb, and Zn were recovered in leachate after the addition of 10 mg metal per pot, suggesting that most heavy metals (>99%) were retained in the growing mediums. Zeolites reduced the amount of Cd and Pb in leachate water, but not Cu or Zn.     

Fractionation and mobility of copper, lead, and zinc in soil profiles in the vicinity of a copper smelter

Four soil profiles located near a copper smelter in Poland were investigated for the distribution and chemical fractions of Cu, Pb, and Zn and their mobility in relation to soil properties. Contamination with heavy metals was primarily restricted to surface horizons and the extent of contamination was 7- to 115-fold for Cu, 30-fold for Pb, and 6-fold for Zn as compared with subsurface horizons. In the less-contaminated fine-textured soil, the metals were distributed in the order: residual > Fe-Mn oxides occluded > organically complexed > exchangeable and specifically adsorbed, while the order for sandy soils was: residual > organically complexed > Fe-Mn oxides occluded > exchangeable and specifically adsorbed. The contaminated surface horizons of these profiles showed no consistent pattern of metal distribution. However, the common features of highly contaminated soils were very low percentage of residual fraction and the dominance of the NH4OAc extractable fraction. The sum of mobile metal fractions was generally < 10% in subsurface horizons, while in the contaminated surface horizons these fractions made up 50% of the total metal contents. Soil properties contributed more to the relative distribution of the metal fractions in the studied profiles than did the distance and direction to the source of pollution. The amounts of metal extracted by 0.01 M CaCl2 accounted for only a small part of the same metals extracted by NH4OAc. The mobility indexes of metals correlated positively and significantly with the total content of metals and negatively with the clay content.     

施入城市生活垃圾堆肥对玉米植株重金属分布及土壤养分的影响

以玉米为供试作物,研究施入生活垃圾堆肥对土壤和玉米各器官重金属分布规律及对土壤养分的影响。结果表明：连续3年施肥,土壤速效养分的含量明显增加;土壤重金属呈现累积,但含量远远低于二级土壤标准（GB 15618—1995）;植株中重金属含量表现为根部〉茎秆〉叶片〉籽粒,Cd在植株根部富集,但未大量向其他部位转移,玉米植株地上部分重金属含量明显低于饲料卫生标准（GB 13078—2001）。由此推断,在短期内（3年）,年施入60 000 kg·hm^-2的垃圾堆肥能提高土壤肥力,且暂时不会引起土壤重金属污染,也不影响玉米植株的饲用;使用多年后应及时监测,以保证安全性。     

Sorption and desorption of Cd, Cu and Pb using biomass from an eutrophized habitat in monometallic and bimetallic systems

This work examines the sorption capacity of a natural biomass collected from an irrigation pond. The biomass mainly consisted of a mixture of chlorophyte algae with caducipholic plants. Biosorption experiments were performed in monometallic and bimetallic solutions containing different metals commonly found in industrial effluents (Cd, Cu and Pb). The biosorption process was slightly slower in the binary system comparing with monometallic system which was related to competition phenomena between metal cations in solution. The biosorbent behaviour was quantified by the sorption isotherms fitting the experimental data to mathematical models. In monometallic systems, the Langmuir model showed a better fit with the following sorption order: Cu ~ Pb > Cd; and biomass-metal affinity order: Pb > Cd ~ Cu. In bimetallic systems, the binary-type Langmuir model was used and the sorption order obtained was: Pb ~ Cu > Cd. In addition, the effectiveness of the biomass was investigated in several sorption-desorption cycles using HCl and NaHCO(3). The recovery of metal was higher with HCl than with NaHCO(3), though the sorption uptake of the biomass was sensitively affected by the former desorption agent in subsequent sorption cycles.     

Fish Species Used as Biomarker for Heavy Metal and Hydrocarbon Contamination for Cross River, Nigeria

Enhanced concentrations of Fe, Zn, Mn, Pb, Cu, Cd and total hydrocarbons (THC) determined in fish samples from the Cross River system, Nigeria have been associated with clinical defects (nausea, headache, hepatitis, body rashes) observed in coastal residents who are the major consumers of the fish species. Fish samples were collected from ten locations with varying degrees of exposure to human activities. Heavy metal concentrations in fish followed the sequence: Fe>Zn>Mn>Pb>Cu>Cd with the highest concentration of 243 g/g (Fe) wet weight occurring in Tympanotonus sp. Fe levels were significantly (P<0.001) higher than other metals analysed. The sequence in total hydrocarbon concentrations according to fish species was in the order of O. niloticus (55.1 g/g) > E. fimbriata > P. elongatus > Portonus sp. > C. nigrodigitatus > Tympanotonus sp. Generally, the demersal species showed a marked potential for tolerating high levels of heavy metals while the pelagic species showed preference for the accumulation of hydrocarbons. The degree of contamination depended on pollutant type, fish species, sampling location, trophic level and their mode of feeding. The persistent accumulation and tolerable potential of Tympanotonus, Portonus and P. elongatus suggest that they might be effectively utilized as self-integrating indicators for time-series monitoring of the rate of recovery of the impacted ecosystem by heavy metals. Possible sources of pollutant include leachates from municipal dumps, used crankcase oils from fluvial discharges (mechanic workshops) and occasional oil spills.