Butyltin compounds in sediment and fish from the Polish Coast of the Baltic Sea

Concentrations of mono- (MBT), di- (DBT), and tri-(TBT) butyltin compounds were measured in eggs, liver, and muscle of nine species of fish from four regions of the Baltic Sea - the Firth of Vistula, the Gulf of Gdańsk, Puck Bay, and the mouth of the Vistula River. The overall concentration ranges among all the fish sampled from the four sites were: < 7 to 79 ng/g for MBT, 6 to 1100 ng/g for DBT, 7 to 3600 ng/g for TBT, and 16 to 4800 ng/g for total BTs, on a wet wt basis. The highest concentration of total BTs was found in herring liver from the Firth of Vistula (4800 ng/g, wet wt) and in roach muscle from Puck Bay (3300 ng/g, wet wt), while the least concentration was found in burbot eggs and liver from the Vistula River (39 and 32 ng/g, wet wt, respectively). TBT was the major form of BTs present in most samples analyzed. Sediment samples collected from shipyards in the Gulf of Gdańsk contained butyltin concentrations ranging from 1.2 to 46 μg/g (dry wt) for MBT, 2.0 to 42 μg/g for DBT, and 2.6 to 40 μg/g for TBT. As with the fish, the majority of the BTs in sediment were present as TBT, which suggested recent exposure of the aquatic environment of the region to TBT.     

Simulation of the tropospheric distribution of carbon monoxide during the 1984 MAPS experiment

A global, three-dimensional tropospheric chemistry model was used to perform simulations of the tropospheric distribution of carbon monoxide (CO) coinciding with NASA's Measurement of Air Pollution from Satellites (MAPS) experiment which took place during 5–13 October 1984. Archived meteorological data for September and October, 1984, were obtained from the European Centre for Medium-Range Weather Forecasting and used to drive the offline chemical transport model simulations. Base-case CO emissions were generated by applying emission factors to compiled inventories for related or co-emitted trace species. Simulation results from September and October have been compared with a recent re-release of the 1984 MAPS data and with in situ correlative data taken during the MAPS mission. Because of unrealistically large spatial variability in N₂O mixing ratios measured concurrently by MAPS, model results were also compared with an adjusted CO data set generated by assuming that errors in N₂O measured mixing ratios were correlated with errors in the MAPS CO data. These comparisons, in conjunction with simulations probing model sensitivities, led to the conclusion that biomass burning CO emissions from central and southern Africa may have been larger during September and October, 1984, than our initial best estimate based on the CO₂ emissions data of Hao et al. (1990. Fire in the Tropical Biota; Ecosystem Processes and Global Challenges. Springer, Berlin, pp. 440–462; 1994. Global Biogeochemical Cycles 8, 495–503). This result is in disagreement with recent estimates of biomass burning emissions from Africa (Scholes et al., 1996, Journal of Geophysical Research 101, 23677–23682) which are smaller than previously thought for emissions from this region. Although unknown model deficiencies cannot be conclusively ruled out, model sensitivity studies indicate that increased CO emissions from central and southern Africa offer the best explanation for reducing observed differences between model results and MAPS data for this time period. Our results, in combination with a disparity in recent CO emission estimates from this region (Scholes et al., 1996; Hao et al., 1996, Journal of Geophysical Research 101, 23577–23584), and in light of recent indications of highly variable biomass burning activities from the tropical western Pacific (Folkins et al., 1997, Journal of Geophysical Research 102, 13291–13299), seem to suggest that biomass burning emissions exhibit significant year-to-year variability. This large variability of emissions sources makes the accurate simulation of specific time periods very difficult and suggests that biomass burning trace species inventories may have to be developed specifically for each simulated time period, employing satellite-derived information on fire coverage and flame intensity.     

Quantitative modelling to estimate the transfer of pharmaceuticals through the food production system

Use of pharmaceuticals in animal production may cause an indirect route of contamination of food products of animal origin. This study aimed to assess, through mathematical modelling, the transfer of pharmaceuticals from contaminated soil, through plant uptake, into the dairy food production chain. The scenarios, model parameters, and values refer to contaminants in emission slurry production, storage time, immission into soil, plant uptake, bioaccumulation in the animal's body, and transfer to meat and milk. Modelling results confirm the possibility of contamination of dairy cow's meat and milk due the ingestion of contaminated feed by the cattle. The estimated concentration of pharmaceutical residues obtained for meat ranged from 0 to 6 ng kg^?1 for oxytetracycline, from 0.011 to 0.181 μg kg^?1 for sulfamethoxazole, and from 4.70 to 11.86 μg kg^?1 for ketoconazole. The estimated concentrations for milk were: zero for oxytetracycline, lower than 40 ng L^?1 for sulfamethoxazole, and from 0.98 to 2.48 μg L^?1 for ketoconazole. Results obtained for the three selected pharmaceuticals indicate a minor risk for human health. This study showed that supply chain modelling could be an effective tool in assessing the indirect contamination of feedstuff and animal products by residues of pharmaceuticals. The model can easily be adjusted to other contaminants and supply chain and, in this way, present a valuable tool to underpin decision making.     

Design Scenario for the Radioisotopic Estimation of the Biogenic Component of Airborne Particles

Abstract

An experimental design is described to estimate the fraction of secondary fine particle from the biogenic component of volatile organic compounds (VOCs) in the atmosphere using radiocarbon isotopic abundance ratios. The method distinguishes between “modern” carbon (C), and “old” C of primary and secondary origins based on three components, condensed-phase organic carbon (OC), semi-volatile particulate compounds (SVOCs), and VOCs. The method depends on interpretation of diurnal and seasonal variation in OC, SVOC, and VOC concentrations. Sampling employs a filter-denuder unit, which collects the three C components for isotopic analysis. The samples are collected repetitively for a daily sequence of the same hourly intervals covering diurnal periods with similar meteorological conditions. Collected C is thermally treated to separate OC from black carbon on filters and VOCs or SVOCs from adsorbents, with all four fractions individually oxidized to carbon dioxide to determine the radiocarbon content by accelerator mass spectrometry. Using C isotope abundance, the data are interpreted for fractions of primary modern C and secondary modern C as estimated from averaging diurnal and seasonal variations in the concentration data. As support for interpretation, samples of OC, SVOCs, and VOCs would be analyzed for speciation to identify source indicator species present.     

Diagnostic Study of Critical Circuits of the Kraft Pulp Production Process Considering the Environmental Aspects

Abstract

This paper describes systematic work undertaken in the field of atmospheric emissions from Portuguese Kraft pulp mills. The study led to the determination of emission factors from stationary sources, which proved to be an important tool for assessing the need for investment in air pollution abatement equipment, specifically for malodorous gases.     

Design scenario for the radioisotopic estimation of the biogenic component of airborne particles

An experimental design is described to estimate the fraction of secondary fine particle from the biogenic component of volatile organic compounds (VOCs) in the atmosphere using radiocarbon isotopic abundance ratios. The method distinguishes between "modern" carbon (C), and "old" C of primary and secondary origins based on three components, condensed-phase organic carbon (OC), semi-volatile particulate compounds (SVOCs), and VOCs. The method depends on interpretation of diurnal and seasonal variation in OC, SVOC, and VOC concentrations. Sampling employs a filter-denuder unit, which collects the three C components for isotopic analysis. The samples are collected repetitively for a daily sequence of the same hourly intervals covering diurnal periods with similar meteorological conditions. Collected C is thermally treated to separate OC from black carbon on filters and VOCs or SVOCs from adsorbents, with all four fractions individually oxidized to carbon dioxide to determine the radiocarbon content by accelerator mass spectrometry. Using C isotope abundance, the data are interpreted for fractions of primary modern C and secondary modern C as estimated from averaging diurnal and seasonal variations in the concentration data. As support for interpretation, samples of OC, SVOCs, and VOCs would be analyzed for speciation to identify source indicator species present.     

Setting the stage for the review of the international estimate of short-term intake (IESTI) equation

ABSTRACT

In the framework of setting Maximum Residue Limits (MRLs) for pesticides, both chronic and acute health risks to consumers arising from the long-term and short-term dietary exposure to pesticide residues have to be assessed. The current internationally harmonized approach for assessing the acute dietary exposure is based on deterministic methods for calculating the IESTI (International Estimate of Short-Term Intake). Recently, it became apparent that the IESTI approach needs a revision in the light of new scientific and political aspects. The main reasons that require this review were the lack of an international harmonization of the methodology which implies trade barriers as well as difficulties in risk communication concerning the public trust in regulatory systems. The most recent milestone in the scientific debate on a possible revision of the IESTI equation was an international scientific workshop held in Geneva in September 2015. The main objectives of this meeting were the re-evaluation, and where possible, the international harmonization of the input parameters for the IESTI equations as well as the equations themselves. The main recommendations from the workshop were (i) to replace the highest residue and supervised trials median residue with the maximum residue limit (MRL), (ii) to use a standard variability factor of three, (iii) to derive the P97.5 large portion value from the distribution of consumption values of dietary surveys expressed as kg food/kg bw/d, and (iv) to remove the commodity unit weight from the equations. In addition, the application of conversion factors and processing factors was addressed. On the initiative of the (World Health Organization) WHO Collaborating Centre on Chemical Food Safety at the National Institute for Public Health and the Environment (RIVM), the Netherlands, an international working group with members from the French Agency for Food, Environmental and Occupational Health and Safety, France (ANSES), Australian Pesticides and Veterinary Medicines Authority, Australia (APVMA), German Federal Institute for Risk Assessment, Germany (BfR), Chemical Regulation Division, the United Kingdom (CRD), European Food Safety Authority (EFSA), and RIVM, the Netherlands was formed after the IESTI workshop to conduct a comprehensive impact assessment of the proposed changes of the IESTI equations.     

焦化废水中细菌质粒的研究

细菌质粒中常带有一些可编码降解特殊有毒物质酶的基因,为了研究质粒对有毒物质CN^-的降解的意义,主要调查了焦化废水中好氧异养菌的质粒分布特点。从山西省焦化企业公司生化站、太原煤气公司焦化厂生化站中筛选出53株细菌,利用琼脂糖凝胶电泳法,采用GDS-8000型凝胶电泳分析仪进行拍照,同时测定各菌株降氰、降酚能力,CN^-采用异烟酸-毗唑啉酮法,酚采用4-氨基安替比林法测定。结果表明,质粒的存在与降氰力有一定的关系,但对降酚力的影响差异不显著。同时,通过对其中11^*号菌株进行了质粒转化和消除实验,证明质粒稳定,不可用十二烷基磺酸钠(SDS)消除掉,用E．cbli DHI作受体菌,用11^#菌株作供体菌。作转化实验,但由于种种原因,没有筛洗到转化子。     

Effects of the density of meteorological observations on the diagnostic wind fields and the performance of photochemical modeling in the greater Seoul area

The high ozone episode in the greater Seoul area (GSA) for the period of 27 July–1 August 1997 was modeled by the California Institute of Technology (CIT) three-dimensional photochemical model. During the period, ozone concentrations around 140 ppb were observed for 2 days. Two sets of diagnostic wind fields were constructed by using observations from the weather stations operated by the Korea Meteorological Administration. One set of wind fields utilized only observations from the surface weather stations (SWS) and the other set also utilized observations from the automatic weather stations (AWS) that were more densely distributed than the SWS. The results showed that utilizing observations from the AWS could represent fine variations in the wind field such as those caused by topography. A better wind field gave a more reasonable spatial distribution of ozone concentrations. The model performance of ozone prediction was also improved to some extent, but only marginally acceptable owing to large day-to-day variations. Overshoots of primary pollutants particularly for NO₂ were observed as pollutants were accumulated where low wind speeds were maintained. More precise information on diurnal and daily variations in emissions was warranted in order to better model the photochemical phenomena over the GSA.     

Characterization and application of the enzyme peroxidase to the degradation of the mycotoxin DON

Deoxynivalenol (DON), one of the main mycotoxins found in food matrices, has high level of toxicity. This study aimed to characterize the peroxidase enzyme extracted from rice bran to be applied to the biodegradation of DON in order to evaluate the potential peroxidase (PO) from rice bran (RB) has to degrade DON in optimal conditions. Purification and recovery factors of PO extracted from RB and purified by three-phase partitioning were 5.7% and 50%, respectively. PO had the highest level of activity in the phosphate buffer 5 mM pH 5.5 in both crude and purified forms, whose reaction temperatures were 25°C and 10°C. At the end of production, purification and characterization steps, specific activities of the bran were 115.79 U mg^?1 and 4363 U g^?1. Reduction in the mycotoxin DON in optimal conditions determined for PO from RB was 20.3%, a promising result when the aim is to adequate mycotoxicological levels to foods.     

Governance of Water Resources in the Phase of Change: A Case Study of the Implementation of the EU Water Framework Directive in Sweden

In this article, focusing on the ongoing implementation of the EU Water Framework Directive, we analyze some of the opportunities and challenges for a sustainable governance of water resources from an ecosystem management perspective. In the face of uncertainty and change, the ecosystem approach as a holistic and integrated management framework is increasingly recognized. The ongoing implementation of the Water Framework Directive (WFD) could be viewed as a reorganization phase in the process of change in institutional arrangements and ecosystems. In this case study from the Northern Baltic Sea River Basin District, Sweden, we focus in particular on data and information management from a multi-level governance perspective from the local stakeholder to the River Basin level. We apply a document analysis, hydrological mapping, and GIS models to analyze some of the institutional framework created for the implementation of the WFD. The study underlines the importance of institutional arrangements that can handle variability of local situations and trade-offs between solutions and priorities on different hierarchical levels.     

Environmental tritium of the Danube basin in Yugoslavia

An overview of environmental distribution of tritium in the Danube basin in Yugoslavia during the period 1976-1990 is presented. Temporal and regional variations of environmental tritium in the Danube along its flow (1425-847 km from the confluence) and its tributaries (the Sava, the Tisa, the Velika Morava and the Timok) at various locations, as well as in alluvial groundwaters, are given. In Belgrade, monthly values of tritium in rainfall ranged from 1.1 to 18.3 Bq litre(-1), with a maximum in the late spring and early summer months. The half-life for decline in concentration was estimated as 8.3+/-1.0 years. The total amount of tritium deposited in the first 6 months during 1976-90 was 35% larger than in the second 6 months for the same period. Seasonal variations were noticeable in rivers and groundwaters, but these were greatly attenuated and smoothed for the latter. Tritium content in the monthly composite samples from the river in the Belgrade region varied between 2.5 and 18.2 Bq litre(-1) for the Danube and from 1.5 to 16.8 Bq litre(-1) for the Sava. The yearly mean values along the Danube and its tributaries ranged from 2.4 to 15.9 Bq litre(-1) with individual measurements 1.0-30.2 Bq litre(-1). The half-lives were between 6.9+/-1.7 for the Velika Morava and 9.4+/-0.9 for the Danube. Groundwaters, particularly ones in the Ranney wells, followed changes of tritium content in the rivers with a time lag from a few days to a month. During the period of observation, tritium content decreased in alluvial waters with half-lives from 9.9+/-1.6 (Belgrade area) to 7.3+/-1.8 (the Velika Morava).     

A wind tunnel study of the effect of roadway configurations on the dispersion of traffic-related pollution

In this paper we examine the effect of different roadway configurations, including noise barriers and roadway elevation or depression relative to the surrounding terrain, on the dispersion of traffic-related pollutants for winds perpendicular to the roadway. A wind tunnel experiment modeling 12 different configurations was performed to study the flow fields and the concentration distributions resulting from emissions from a simulated six-lane highway. All of the configurations examined here reduced the downwind ground-level concentrations relative to that for a flat, unobstructed roadway; however, the degree to which the concentrations were reduced varied widely depending on the particular situation.Ground-level concentration data from the cases considered in this research indicate that a constant entrainment velocity can be used over the region beginning downwind of any initial disturbance to the flow resulting from the roadway configuration (e.g., a recirculation region behind a noise barrier) and extending at least to the end of our measurements. For example, for the case of a single noise barrier on the downwind side of the road, this region extends from approximately four barrier heights downwind of the roadway to 40 barrier heights. It was also found that the virtual origin concept is useful in describing the initial mixing created by the particular roadway configuration. To effectively model the influence of the roadway configuration on the dispersion, a combination of a virtual origin and an entrainment velocity may be effective. The magnitude of the virtual origin shift appears to depend on the particular roadway configuration, while the entrainment velocity appears to be a function of the friction velocity and the roadway geometry. These results suggest that road configuration must be taken into account in modeling near-road air quality.     

Cartographic modelling of aerotechnogenic pollution in snow cover in the landscapes of the Kola Peninsula

The goal of this work was to develop computational techniques for sulphates, nickel and copper accumulation in the snow in the local pollution zone. The main task was to reveal the peculiarities of formation and pollution of snow cover on the region with complex cross-relief. A digital cartographic model of aerotechnogenic pollution of snow cover in the landscapes of the local zone has been developed, based on five-year experimental data. Data regarding annual emissions from the industrial complex, information about distribution of wind and the sum of precipitation from meteostation "Nikel" for the winter period, allowed the model to ensure: * material presentation in the form of maps of water capacity and accumulation of sulphates, nickel and copper in the snow over any winter period in retrospective; * calculation of water capacity and accumulation of pollutants for watersheds and other natural-territorial complexes; * solution of the opposite problem about the determination of the emissions of sulphates, nickel and copper from the enterprise by measuring snow pollution in datum points. The model can be used in other northern regions of the Russian Federation with similar physical-geographical and climatic conditions. The relationships between the sum of precipitation and water capacity in the landscapes of the same type and also the relationships between pollution content in snow and relief, pollution content in snow and distance from the source of emissions, were used as the basis for the model.     

Determination of the herbicide fluroxypyr in oil matrices

The purpose of this study was to develop a method for the determination of fluroxypyr (4-amino-3,5-dichloro-6-fluro2-pyridyloxyacetic acid) residue in palm oil namely crude palm oil (CPO) and crude palm kernel oil (CPKO). The method involves the extraction of the herbicide from the oil matrix followed by low temperature precipitation and finally quantification of the residues using the high performance liquid chromatography (HPLC). The extraction efficiency of the method was evaluated by conducting recovery studies. The recovery of fluroxypyr from the fortified CPO samples ranged from 78%-111% with the relative values for the coefficient of variation ranging from 1.4 to 8.6%. Furthermore, the recovery of fluroxypyr from the spiked CPKO samples ranged from 91-107% with the relative values for the coefficient of variation ranging from 0.6 to 4.5%. The minimum detection limit of fluroxypyr in CPO and CPKO was 0.05 microg/g. The method was used to determine fluroxypyr residues from the field-treated samples of CPO and CPKO. When fluroxypyr was used for weed control in oil palm plantations no residue was detected in CPO and CPKO irrespective of the sampling interval and the dosage applied at the recommended or double the manufacturer's recommended dosage.     

Study of the spatial variation of the biodegradation rate of the herbicide bentazone with soil depth using contrasting incubation methods

Vertical and horizontal spatial variability in the biodegradation of the herbicide bentazone was compared in sandy-loam soil from an agricultural field using sieved soil and intact soil cores. An initial experiment compared degradation at five depths between 0 and 80 cm using sieved soil. Degradation was shown to follow the first-order kinetics, and time to 50% degradation (DT(50)), declined progressively with soil depth from 56 d at 0-10 cm to 520 d at 70-80 cm. DT(50) was significantly correlated with organic matter, pH and dehydrogenase activity. In a subsequent experiment, degradation rate was compared after 127 d in sieved soil and intact cores from 0 to 10 and 50 to 60 cm depth from 10 locations across a 160x90 m portion of the field. Method of incubation significantly affected mean dissipation rate, although there were relatively small differences in the amount of pesticide remaining in intact cores and sieved soil, accounting for between 4.6% and 10.6% of that added. Spatial variability in degradation rate was higher in soil from 0 to 10 cm depth relative to that from 50 and 60 cm depth in both sieved soil and intact core assessments. Patterns of spatial variability measured using cores and sieved soil were similar at 50-60 cm, but not at 0-10 cm depth. This could reflect loss of environmental context following processing of sieved soil. In particular, moisture content, which was controlled in sieved soil, was found to be variable in cores, and was significantly correlated with degradation rate in intact topsoil cores from 0 to 10 cm depth.     

Studies into the formation of dioxins in the sintering process used in the iron and steel industry. 1. Characterisation of isomer profiles in particulate and gaseous emissions

Dioxin analyses using a DB5MS chromatography column are presented for samples of dust from an electrostatic precipitator and emissions from the main stack of a UK sinter plant. The analyses have been repeated using the SP2331 column, for which the elution order has been determined for the whole range of tetra to octachlorodibenzo-p-dioxins and dibenzofurans, and which provides a larger degree of separation than the DB5MS column. Polychlorinated dibenzofurans are present in significantly larger amounts in both the dust and stack emissions, and are the main contributors to the I-TEQ. Analysis using the SP2331 column for dioxins show considerable similarity to those of Bacher et al. for soot from a wood-burning fire, but differ markedly from those of Addink et al. for simulation of waste incineration. The similarities to Bacher's results are less for the dibenzofurans. Comparison of absolute concentrations with reported vapour pressures shows the retention of significant dioxin in the dust to involve mechanisms other than pure condensation.     

Modeling the long-term transport and accumulation of radionuclides in the landscape for derivation of dose conversion factors

To evaluate the radiological impact of potential releases to the biosphere from a geological repository for spent nuclear fuel, it is necessary to assess the long-term dynamics of the distribution of radionuclides in the environment. In this paper, we propose an approach for making prognoses of the distribution and fluxes of radionuclides released from the geosphere, in discharges of contaminated groundwater, to an evolving landscape. The biosphere changes during the temperate part (spanning approximately 20,000 years) of an interglacial period are handled by building biosphere models for the projected succession of situations. Radionuclide transport in the landscape is modeled dynamically with a series of interconnected radioecological models of those ecosystem types (sea, lake, running water, mire, agricultural land and forest) that occur at present, and are projected to occur in the future, in a candidate area for a geological repository in Sweden. The transformation between ecosystems is modeled as discrete events occurring every thousand years by substituting one model by another. Examples of predictions of the radionuclide distribution in the landscape are presented for several scenarios with discharge locations varying in time and space. The article also outlines an approach for estimating the exposure of man resulting from all possible reasonable uses of a potentially contaminated landscape, which was used for derivation of Landscape Dose Factors.     

Factors controlling the bioaccumulation of mercury and methylmercury by the estuarine amphipod Leptocheirus plumulosus

The bioaccumulation of inorganic mercury (HgI) and monomethylmercury (MMHg) by benthic organisms and subsequent trophic transfer couples the benthic and pelagic realms of aquatic systems and provides a mechanism for transfer of sedimentary contaminants to aquatic food chains. Experiments were performed to investigate the bioavailability and bioaccumulation of particle-associated HgI and MMHg by the estuarine amphipod Leptocheirus plumulosus to further understand the controls on bioaccumulation by benthic organisms. HgI and MMHg are particle reactive and have a strong affinity for organic matter, a potential food source for amphipods. Microcosm laboratory experiments were performed to determine the effects of organic matter on Hg bioaccumulation and to determine the major route of Hg uptake (i.e. sediment ingestion, uptake from water/porewater, or uptake from 'food'). Amphipods living in organic-rich sediment spiked with Hg accumulated less Hg than those living in sediments with a lower organic matter content. Feeding had a significant impact on the amount of HgI and MMHg accumulated. Similarly, amphipods living in water with little organic matter accumulated more Hg than those living in water with a greater percentage of organic matter. MMHg was more readily available for uptake than HgI. Experimental results, coupled with results from a bioaccumulation model, suggest that accumulation of HgI and MMHg from sediment cannot be accurately predicted based solely on the total Hg, or even the MMHg, concentration of the sediment, and sediment-based bioaccumulation factors. All routes of exposure need to be considered in determining the accumulation of HgI and MMHg from sediment to benthic invertebrates.     

Determination of 99Tc deposited on the ground within the 30-km zone around the Chernobyl reactor and estimation of 99Tc released into atmosphere by the accident

Technetium-99 was determined in samples from the 30-km zone around the Chernobyl reactor. Concentrations of ⁹⁹Tc in soil samples taken from three forest sites ranged from 1.1 to 14.1 Bq kg⁻¹ dry weight for the organic soil layers, and from 0.13 to 0.83 Bq kg⁻¹ dry weight for the mineral soil layers. In particular, for the organic layers, the measured ⁹⁹Tc concentrations were one or two orders of magnitude higher than those due to global fallout ⁹⁹Tc. The ⁹⁹Tc depositions (Bq m⁻²), based on the sum of the depositions measured in organic and mineral layers, ranged from 130 Bq m⁻² within the 10-km zone to about 20 Bq m⁻² close to the border of the 30-km zone. Taking the corresponding measured ¹³⁷Cs depositions into account, it was found that the activity ratio of ⁹⁹TW/¹³⁷Cs ranged from 6 × 10⁻⁵ to 1.2 × 10⁻⁴. It was estimated that about 970 GBq of ⁹⁹Tc had been released by the Chernobyl accident. This figure corresponded to 2%–3% of the total ⁹⁹Tc inventory in the core.