The kinetics of catalytic incineration of dimethyl sulfide and dimethyl disulfide over an MnO/Fe2O3 catalyst

The catalytic incineration of dimethyl sulfide and dimethyl disulfide [(CH3)2S and (CH3)2S2] over an MnO/Fe2O3 catalyst was carried out in a bench-scale catalytic incinerator. Three kinetic models (i.e., the power-rate law, the Mars and Van Krevelen model, and the Langmuir-Hinshelwood model) were used to analyze the results. A differential reactor design was used for best fit of kinetic models in this study. The results show that the Langmuir-Hinshelwood model may be feasible to describe the catalytic incineration of (CH3)2S and (CH3)2S2. This suggests that the chemical adsorption of O2 molecules is important in this incineration.     

The Kinetics of Catalytic Incineration of Dimethyl Sulfide and Dimethyl Disulfide over an MnO/Fe2O3 Catalyst

ABSTRACT

The catalytic incineration of dimethyl sulfide and dimethyl disulfide [(CH₃)₂S and (CH₃)₂S₂] over an MnO/Fe₂O₃ catalyst was carried out in a bench-scale catalytic incinerator. Three kinetic models (i.e., the power-rate law, the Mars and Van Krevelen model, and the Langmuir-Hinshelwood model) were used to analyze the results. A differential reactor design was used for best fit of kinetic models in this study. The results show that the Langmuir-Hinshelwood model may be feasible to describe the catalytic incineration of (CH₃)₂S and (CH₃)₂S₂. This suggests that the chemical adsorption of O₂ molecules is important in this incineration.     

The promoter effect and a rate expression of the catalytic incineration of (CH3)2S2 over an improved CuO-MoO3/gamma-Al2O3 catalyst

The CuO-MoO3/gamma-Al2O3 catalyst, confirmed previously as having good activity in the catalytic incineration of (CH3)2S2, was employed as the principal catalyst in this study. With the aim of improving catalyst activity and resistance to deactivation by sulfur compounds, a promoter was added either before adding the precursors of Cu and Mo or together with Cu and Mo onto the gamma-Al2O3. Promoters included transition metals and elements from groups IA-VIIA in the chemical periodic table. Experimental results reveal Cr2O3 as the most effective promoter, with an optimal composition of 5 wt.% Cu, 6 wt.% Mo and 4 wt.% Cr (designated as Cu(5)-Mo(6)-Cr(4)/gamma-Al2O3). Knowing that higher acidity can improve activity, we further investigated the effect of acid treatment on the performance of the Cu(5)-Mo(6)-Cr(4)/gamma-Al2O3 catalyst. Experimental results indicate the H2SO4-treated catalyst (Cu(5)-Mo(6)-Cr(4)/sulfated-gamma-Al2O3) has a better activity and durability. A study for finding an appropriate rate expression for the catalytic incineration of (CH3)2S2 by Cu(5)-Mo(6)-Cr(4)/sulfated-gamma-Al2O3 was carried out in a differential reactor. The results show that the Mars-Van Krevelen model is applicable to this destructive oxidation reaction. Results additionally reveal that competitive adsorption of CH4 reduces conversion of (CH3)2S2.     

Photocatalytic mineralization of glyphosate in a small-scale plug flow simulation reactor by UV/TiO2

The present work involves the photocatalytic mineralization of glyphosate on a plug flow reactor by UV/TiO(2). The effect of catalyst loading shows an optimal value (0.4 g L(-1)) which is necessary to mineralize glyphosate. The kinetic rate of glyphosate mineralization decreases with the increasing initial concentration of glyphosate, and the data can be described using the first-order model. An alkaline environment is conducive to glyphosate mineralization. The mineralization efficiency increases with elevated flow rate to 114 mL min(-1), which is followed by a decrease with a further increase in flow rate due to the reduction of the residence time. The presence of external oxidants (K(2)S(2)O(8), H(2)O(2) and KBrO(3)) and photosencitizer (humic acid) can significantly enhance glyphosate mineralization. Photocatalysis oxidation ability of the three studied oxidants decrease in the order of: S(2)O(8)(2-) > BrO(3)(-) > H(2)O(2). Finally, the Langmuir-Hinshelwood (L-H) model was used to rationalize the mechanisms of reactions occurring on TiO(2) surfaces and L-H model constants were also determined.     

Innovative PCDD/F-containing gas stream generating system applied in catalytic decomposition of gaseous dioxins over V2O5-WO3/TiO2-based catalysts

Development of effective PCDD/F (polychlorinated dibenzo-p-dioxin and dibenzofuran) control technologies is essential for environmental engineers and researchers. In this study, a PCDD/F-containing gas stream generating system was developed to investigate the efficiency and effectiveness of innovative PCDD/F control technologies. The system designed and constructed can stably generate the gas stream with the PCDD/F concentration ranging from 1.0 to 100ng TEQ Nm(-3) while reproducibility test indicates that the PCDD/F recovery efficiencies are between 93% and 112%. This new PCDD/F-containing gas stream generating device is first applied in the investigation of the catalytic PCDD/F control technology. The catalytic decomposition of PCDD/Fs was evaluated with two types of commercial V(2)O(5)-WO(3)/TiO(2)-based catalysts (catalyst A and catalyst B) at controlled temperature, water vapor content, and space velocity. 84% and 91% PCDD/F destruction efficiencies are achieved with catalysts A and B, respectively, at 280 degrees C with the space velocity of 5000h(-1). The results also indicate that the presence of water vapor inhibits PCDD/F decomposition due to its competition with PCDD/F molecules for adsorption on the active vanadia sites for both catalysts. In addition, this study combined integral reaction and Mars-Van Krevelen model to calculate the activation energies of OCDD and OCDF decomposition. The activation energies of OCDD and OCDF decomposition via catalysis are calculated as 24.8kJmol(-1) and 25.2kJmol(-1), respectively.     

Kinetic study and modeling on photocatalytic degradation of para-chlorobenzoate at different light intensities

In order to clarify the dependence of apparent adsorption constant Ks in the Langmuir-Hinshelwood (L-H) model on the incident light intensity, photocatalytic degradation kinetic characteristics were experimentally investigated at different light intensities using para-chlorobenzoate (4-CBA) as a model compound. In all cases 4-CBA initial degradation rates showed dependence on 4-CBA initial concentration, which can be described by the L-H model. However, the adsorption constant Ks and rate constant kr obviously varied with light intensity. To account for the experimental finding, slight modification of the classic kinetic model developed by Turchi and Ollis was tentatively proposed by assuming insufficiency of H2O/OH- available for photo-activated holes' scavenging. Such a kinetic model predicts that both k(r) and Ks(-1) are linearly proportional to the square root of the intensity in a rather large intensity range. The validity of the modified model was proved by fitting it to the experimental data.     

Evaluation of relative photonic efficiency in heterogeneous photocatalytic reactors

The evaluation of photonic efficiency in heterogeneous photocatalysis remains elusive because the number of absorbed photons is difficult to assess experimentally. The photonic efficiency of heterogeneous photocatalytic reactors depends on the reactor geometry, irradiation source, and photocatalyst properties. In this work, the relative photonic efficiency of heterogeneous photocatalytic reactors to degrade an azo dye was evaluated using phenol as the standard system. The experimental tests were carried out in a batch reactor under different conditions of pH, catalyst dosage, initial concentration, and ultraviolet (UV) lamps. The kinetics of disappearance of both phenol and azo dye were studied using the initial rate method and were described according to the Langmuir-Hinshelwood (L-H) kinetic model. It was observed that the relative photonic efficiency depends on the adsorption/desorption properties of the photocatalyst.     

Photocatalytic oxidation of sulfamethazine

The photocatalytic degradation of sulfamethazine (SMT), a sulfonamide drug, has been investigated in aqueous heterogeneous solutions containing n-type oxide semiconductors as photocatalysts. The disappearance of the organic molecule follows approximately a pseudo-first-order kinetics according to the Langmuir-Hinshelwood model. It was observed that, with TiO2 P-25 and ZnO as photocatalysts, quantitative degradation of the organic molecule occurs after 4 h. During this time the desulfurization of the substrate is complete, while only 30% of the nitrogen in the organic compound was recovered in the form of nitrate and ammonium ions, indicating that various other nitrogen-containing organic compounds remain in the solution. The addition of H2O2 leads, in the case of TiO2 P-25, to a twofold increase on the reaction rate, while a negative effect has been observed in the presence of ZnO. The initial apparent photonic efficiency (zeta0) of the photooxidation and the mineralization under various experimental conditions have been calculated.     

Photocatalytic oxidation of heptane in the gas-phase over TiO2.

In this paper, gas-phase photocatalytic oxidation (PCO) of heptane over UV-illuminated TiO2 was carried out at ambient temperature in a batch reactor. Complete oxidation of heptane with almost stoichiometric production of CO2 and H2O was observed. The intermediates detected were propanal, butanal, 3-heptanone, 4-heptanone and carbon monoxide. A scheme of the possible mechanism for PCO of heptane over TiO2 was suggested. Langmuir-Hinshelwood kinetics equation was obtained from the results at different initial concentrations of heptane, oxygen, moisture and light intensity. The photocatalytic activity of TiO2 can be sustained indefinitely. This can be attributed to the production of water in the system, which can replenish the consumed hydroxyl radicals.     

清除废气中VOCs的流向变换催化燃烧技术进展

一、引　　言环境恶化严重地威胁人类的生存和社会的可持续发展 ,是当前全世界共同面临的一个重大问题。作为空气污染的主要来源之一 ,易挥发有机物 (ＶＯＣｓ)不仅是一次污染源而且还可能造成光化学烟雾等二次污染[1 ] 。因此 ,控制大气中挥发性有机物非常重要。美国 1 990年开始实施的清洁空气法修正案要求在其后的九年内使大气中有毒化学品的排放量减少 90 % ,其中 70 %为易挥发有机物 (ＶＯＣｓ) ,其他发达国家也都围绕改善生态环境和有效利用资源的战略性要求采取了相应的措施。尤其是投入了大量的人力、物力 ,致力于控制空气中挥发性…     

Heterogeneous oxidation by ozone of naphthalene adsorbed at the air-water interface of micron-size water droplets

The mass transfer of naphthalene vapor to water droplets in air was studied in the presence of ozone (O3) in the gas phase. A falling droplet reactor with water droplets of diameters 55, 91, and 182 microm was used for the study. O3 reacted with naphthalene at the air-water interface, thereby decreasing the mass transfer resistance and increasing the rate of uptake of naphthalene into the droplet. A Langmuir-Hinshelwood reaction mechanism at the air-water interface satisfactorily described the surface reaction. The first-order surface reaction rate constant, ks, increased with decreasing droplet size. Three organic intermediates were identified in the aqueous phase as a result of ozonation of naphthalene at the surface of the droplet indicating both peroxidic and nonperoxidic routes for ozonation. The presence of an organic carbon surrogate (fulvic acid) increased both the partition constant of naphthalene and the surface reaction rate of O3. The heterogeneous oxidation of naphthalene by O3 on the droplet was 15 times faster than the homogeneous oxidation by O3 in the bulk air phase, whereas it was only 0.08 times the homogeneous gas-phase oxidation by hydroxyl radicals under atmospheric conditions.     

Critical effect of hydrogen peroxide concentration in photochemical oxidative degradation of C.I. Acid Red 27 (AR27)

The photochemical decolorization of C.I. Acid Red 27 (AR27), an anionic monoazo dye, was studied in the UV/H2O2 process by using a batch reactor with a UV-C lamp emitting at 254 nm (30 W). The decolorization rate follows pseudo-first order kinetic with respect to the AR27 concentration. The results indicate that the apparent reaction rate constant in the UV/H2O2 process is a function of H2O2 concentration. In this work, a mathematical relation between the apparent reaction rate constant of the AR27 removal and used H2O2 was established. The applied amount of H2O2 was performed in two forms: (i) the light fraction absorbed by H2O2 in 254 nm, (ii) the initial concentration ratio of H2O2 to AR27. The results obtained from this mathematical model are in good agreement with experimental results.     

交联壳聚糖／Cu2O复合颗粒可见光催化脱色活性艳红

利用壳聚糖对金属离子的吸附和螯合作用，通过简单的液相沉淀一还原过程一步原位合成了交联壳聚糖／Cu2O复合粒子。x射线衍射（XRD）和红外（FT—IR）测试结果表明，壳聚糖与Cu2O纳米微粒能有效复合。以活性艳红X-3B溶液为模拟印染废水，采用Langmuir-Hinshelwood假一级方程模拟交联壳聚糖／Cu2O复合粒子光催化脱色反应的动力学行为，从动力学角度系统研究染料初始浓度、反应体系pH、催化剂用量和反应体系气氛等因素对复合粒子可见光催化脱色反应速率的影响。结果表明，当染料溶液浓度较低时，光催化过程可视为假一级反应。降低活性艳红X-3B初始浓度和pH，增加催化剂用量和反应体系的含O2量都可显著增加光解脱色反应速率常数。相同条件下，与纯Cu2O相比，交联壳聚糖／Cu2O复合粒子对X-3B呈现出更好的吸附性和更高的可见光催化活性。     

A proton transfer reaction mass spectrometry based system for determining plant uptake of volatile organic compounds

In order to evaluate the contribution that higher plants make to the removal of volatile organic compounds from the atmosphere, a measurement system consisting of a proton transfer reaction mass spectrometer (PTR-MS), CO₂ analyzer, diffusion devise and leaf enclosure was established. The uptake of VOCs by Golden Pothos (Epipremnum aureum) was investigated. The overall relative error associated with measurements made using this system was <2.2% when a Golden Pothos leaf was exposed to 75–750 ppbv of methyl isobutyl ketone (MIBK). Even at the lowest MIBK concentration, more than 2.2% of the inflowing VOC was lost to the leaf, representing a detectable and positive MIBK uptake rate by the plant. The results of the investigation were compared with a measurement system based on gas chromatography analysis and it was shown that the use of a PTR-MS based system can significantly increase the certainties in determining the rate of VOC uptake by plants.     

交联壳聚糖/Cu_2O复合颗粒可见光催化脱色活性艳红

利用壳聚糖对金属离子的吸附和螯合作用,通过简单的液相沉淀-还原过程一步原位合成了交联壳聚糖/Cu2O复合粒子。X射线衍射(XRD)和红外(FT-IR)测试结果表明,壳聚糖与Cu2O纳米微粒能有效复合。以活性艳红X-3B溶液为模拟印染废水,采用Langmuir-Hinshelwood假一级方程模拟交联壳聚糖/Cu2O复合粒子光催化脱色反应的动力学行为,从动力学角度系统研究染料初始浓度、反应体系pH、催化剂用量和反应体系气氛等因素对复合粒子可见光催化脱色反应速率的影响。结果表明,当染料溶液浓度较低时,光催化过程可视为假一级反应。降低活性艳红X-3B初始浓度和pH,增加催化剂用量和反应体系的含O2量都可显著增加光解脱色反应速率常数。相同条件下,与纯Cu2O相比,交联壳聚糖/Cu2O复合粒子对X-3B呈现出更好的吸附性和更高的可见光催化活性。     

Determination of gas phase adsorption isotherms--a simple constant volume method

Single and ternary solute gas phase adsorption isotherms were conducted in this study to evaluate the effectiveness of a simple constant volume method, which was utilized by using Tedlar gas sampling bags as a constant volume batch reactor. For this purpose, gas phase adsorption of toluene, methyl ethyl ketone (MEK), and methyl isobutyl ketone (MIBK) on two types of activated carbons, BPL-bituminous base and OVC--coconut base, were investigated. For the single solute adsorption, the experimental adsorption data were found to be well correlated with Freundlich and Myers adsorption equations. The pore size distribution of adsorbents was found to affect their adsorption capacities; its effect was dependant on the solute concentration. The ternary adsorption experimental isotherms were accurately predicted by using the well-known model, i.e., ideal adsorbed solution theory (IAST).     

Kinetics of photocatalytic VOCs abatement in a standardized reactor

A standardized micro-pilot scale continuous flow apparatus has been built up, using two types of differential photoreactors, and equipped with a refined control of the working conditions in order to study the photocatalytic degradation as a way to abate VOCs in air. Kinetic measurements have been carried out on trichloroethylene (TCE), methanol and benzene as model pollutants. The absence of diffusional limitation and of reaction product effect on the kinetics have both been demonstrated under our working conditions. The influences of concentration, light flux and temperature on the initial degradation rate have been studied. A simple Langmuir-Hinshelwood kinetic model has been verified for TCE and methanol, whereas benzene degradation was more complex and did not follow this simple mechanism. The determined experimental data aim at being useful in the scaling-up of photocatalytic reactors.     

Heterogeneous photocatalytic degradation of prometryn in aqueous solutions under UV-Vis irradiation

In this study, the heterogeneous photocatalytic degradation of prometryn using TiO(2) as photocatalyst was investigated. The main objectives of the study were: (I) to evaluate the kinetics of the pesticide disappearance, (II) to compare the photocatalytic efficiency of two different types of TiO(2), (III) to examine the influence of various parameters such as initial concentration of pesticide or catalyst and presence of oxidants (H(2)O(2) and K(2)S(2)O(8)), (IV) to evaluate the degree of mineralization and (V) to assess the detoxification efficiency of the studied processes. The experiments were carried out in a 500 ml pyrex UV reactor equipped with a 125 W high-pressure mercury lamp surrounded by a pyrex filter blocking wavelengths below 290 nm. Prometryn concentration was determined using HPLC. It was found that the degradation of the pesticide follows the first order kinetics according to the Langmuir-Hinshelwood model. Parameters like the type and concentration of the catalyst affect the degradation rate. A synergistic effect was observed when an oxidant was added in the TiO(2) suspensions increasing the reaction rate of photodegradation. In order to examine the extent of pesticide mineralization, DOC measurements were carried out. After 6h of illumination, mineralization was achieved up to almost 70%. The toxicity of the treated solution was evaluated using the Microtox test based on the luminescent bacteria Vibrio fisheri, in order to compare the acute toxicity of prometryn and its photoproducts. The detoxification efficiency was found to be dependent on the studied system and it did not follow the rate of pesticide disappearance.     

Development and demonstration of an explicit lumped-parameter biofilter model and design equation incorporating monod kinetics

Biofiltration is an economical air pollution control (APC) technology, particularly suitable for the treatment of air-streams having high flow rates and low concentrations of volatile organic compounds (VOCs). This technology utilizes enzymatic catalysis at ambient conditions to mineralize such pollutants to CO2, H2O, and salts. A pilot-scale study conducted for more than 4 years investigated the development of a new biofiltration technology employing trickle bed air biofilters (TBABs). Following the completion of this experimental study, additional data analysis was performed to develop a simple lumped-parameter biofilter model, assuming first-order kinetics. This model related the observed biofilter performance to the principle independent physical, thermodynamic, and biochemical parameters. The initial model has subsequently been expanded to incorporate Monod kinetics. In this paper, the development and use of the final explicit lumped-parameter biofilter model and design equation, incorporating Monod kinetics, are presented. To facilitate the application of this model, practical procedures are also presented for the determination of VOC solubility, VOC biokinetic Monod parameters, and the maximum practical biofilter inlet VOC concentration.     

Kinetic modeling on photooxidative degradation of C.I. Acid Orange 7 in a tubular continuous-flow photoreactor

The decolorization of C.I. Acid Orange 7 (AO7), an anionic monoazo dye of acid class, was investigated using UV radiation in the presence of H2O2 in a tubular continuous-flow photoreactor as a function of oxidant and dye concentrations, reactor length and volumetric flow rate. The removal efficiency of AO7 depends on the operational parameters and increases as the initial concentration of H2O2 is increased but it decreases when the flow rate and initial concentration of AO7 are increased. The decolorization rate follows pseudo-first order kinetic with respect to the dye concentration. A rate equation for decolorization of AO7 was achieved by kinetic modeling. This model allows predicting concentration of AO7 in different photoreactor lengths for different volumetric flow rates and initial concentrations of H2O2 and AO7. The calculated results obtained from kinetic model were in good agreement with experimental data.