Biodegradation of Slow-Release Fertilizers (Methyleneureas) in Soil

The biodegradation of urea and condensation products thereof (ureaforms or methyleneureas), their nitrification, and their influence on the respiratory rate of soil was studied over periods of up to 100 days. The total methyleneurea content of the soil was determined after its acidic extraction, using a convenient colorimetric assay, and an HPLC protocol was established to analyze for specific components of methyleneureas. Urea, unfractionated methyleneureas, and hot-water soluble methyleneureas were rapidly metabolized to ammonium, which accumulated to high concentrations and was consequently oxidized to nitrate; an accumulation of nitrite was observed during urea but not during methyleneurea degradation. Hot water-insoluble methyleneureas were degraded much more slowly, and ammonium formed from these compounds was oxidized to nitrate without being released in significant amounts. These results suggest that the use of methyleneureas of optimized composition with regard to their water solubility may help to resolve problems such as the toxicity of ammonia to plant growth as well as nitrogen loss by leaching of nitrate, denitrification and volatilization.     

Biodegradability of Urea-Aldehyde Condensation Products

Condensation products of urea and different aldehydes (formaldehyde, isobutyraldehyde, crotonaldehyde) are used in large amounts (more than 300,000 tons per year) as resins, binders, and insulating materials for industrial applications, as well as in controlled-release nitrogen fertilizer for greens, lawns, or bioremediation processes. The biodegradability of these condensates and the enzymic mechanism of their degradation was studied in mircoorganisms isolated from soil, which were able to use these compounds as the sole source of nitrogen for growth. Different pure cultures of both gram-positive and gram-negative bacteria completely degraded methylenediurea, dimethylenetriurea, isobutylidenediurea, and crotonylidenediurea to urea, ammonia, and the corresponding aldehydes and carbon dioxide. Enzymes initiating this degradation were purified and characterized and turned out to be different with regard to their regulation of expression, their physicobiochemical properties, and their reaction mechanism.     

Evaluation of Solvita compost stability and maturity tests for assessment of quality of end-products from mixed latrine style compost toilets

It is challenging and expensive to monitor and test decentralized composting toilet systems, yet critical to prevent the mismanagement of potentially harmful and pathogenic end-product. Recent studies indicate that mixed latrine composting toilets can be inhibited by high ammonia content, a product of urea hydrolysis. Urine-diverting vermicomposting toilets are better able to accomplish the goals of remote site human waste management by facilitating the consumption of fecal matter by earthworms, which are highly sensitive to ammonia. The reliability of Solvita® compost stability and maturity tests were evaluated as a means of determining feedstock suitability for vermicomposting (ammonia) and end-product stability/completeness (carbon dioxide). A significant linear regression between Solvita® ammonia and free ammonia gas was found. Solvita® ranking of maturity did not correspond to ranking assigned by ammonium:nitrate standards. Solvita® ammonia values 4 and 5 contained ammonia levels below earthworm toxicity limits in 80% and 100% of samples respectively indicative of their use in evaluating feedstock suitability for vermicomposting. Solvita® stability tests did not correlate with carbon dioxide evolution tests nor ranking of stability by the same test, presumably due to in situ inhibition of decomposition and microbial respiration by ammonia which were reported by the Solvita® CO₂ test as having high stability values.     

Influence of aeration rate on nitrogen dynamics during composting

The paper aimed to study the influence of aeration rate on nitrogen dynamics during composting of wastewater sludge with wood chips. Wastewater sludge was sampled at a pig slaughterhouse 24h before each composting experiment, and mixtures were made at the same mass ratio. Six composting experiments were performed in a lab reactor (300 L) under forced aeration. Aeration flow was constant throughout the experiment and aeration rates applied ranged between 1.69 and 16.63 L/h/kg DM of mixture. Material temperature and oxygen consumption were monitored continuously. Nitrogen losses in leachates as organic and total ammoniacal nitrogen, nitrite and nitrate, and losses in exhaust gases as ammonia were measured daily. Concentrations of total carbon and nitrogen i.e., organic nitrogen, total ammoniacal nitrogen, and nitrite and nitrate were measured in the initial substrates and in the composted materials. The results showed that organic nitrogen, which was released as NH4+/NH3 by ammonification, was closely correlated to the ratio of carbon removed from the material to TC/N(org) of the initial substrates. The increase of aeration was responsible for the increase in ammonia emissions and for the decrease in nitrogen losses through leaching. At high aeration rates, losses of nitrogen in leachates and as ammonia in exhaust gases accounted for 90-99% of the nitrogen removed from the material. At low aeration rates, those accounted for 47-85% of the nitrogen removed from the material. The highest concentrations of total ammoniacal nitrogen in composts occurred at the lowest aeration rate. Due to the correlation of ammonification with biodegradation and to the measurements of losses in leachates and in exhaust gases, the pool NH4+/NH3 in the composting material was calculated as a function of time. The nitrification rate was found to be proportional to the mean content of NH4+/NH3 in the material, i.e., initial NH4+/NH3 plus NH4+/NH3 released by ammonification minus losses in leachates and in exhaust gases. The aeration rate was shown to be a main parameter affecting nitrogen dynamics during composting since it controlled the ammonification, the ammonia emission and the nitrification processes.     

Application of response surface methodology to the treatment landfill leachate in a three-dimensional electrochemical reactor

The influence of different variables on the removal of ammonia nitrogen and COD from landfill leachate was investigated in a three-dimensional electrochemical reactor. Box–Behnken statistical experiment design and the response surface methodology were used to investigate operating condition effects, such as current density, activated carbon to water ratio and the reaction time, on ammonia nitrogen removal efficiency and COD removal efficiency. The positive and negative effects of variables and the interaction between variables on ammonia nitrogen removal and COD removal were determined. The response surface methodology models were derived based on the results and the response surface plots were developed accordingly.     

光催化氧化法处理甲醛废水的研究

用二氧化钛作催化剂，对较低浓度甲醛废水进行了光催化氧化处理试验。研究了催化剂用量、溶液pH、甲醛初始浓度及外加氧化剂等因素对光催化氧化的影响。试验结果表明，增加催化剂用量可以显著增加反应速度，提高降解效率；增强溶液的酸性和碱性都可以加快甲醛的降解速度，且碱性条件更加有利；在试验浓度范围内，甲醛的起始浓度对其降解反应基本没有影响；外加氧化剂双氧水可以在没有紫外光条件下，很快将甲醛氧化。     

Comparative Biodegradation Study of Starch- and Polylactic Acid-Based Materials

The degradation of starch- and polylactic acid-based plastic films by microorganisms extracted from compost was studied in a liquid medium. The various degradation products produced were measured throughout the duration of the experiment, and total carbon balances were estimated. For an easily biodegradable material, the evolution of the way carbon repartitioned between different degradation products was quite similar whatever the experimental condition or the type of substrate. On the other hand, for a resistant material exposed to these microorganisms, the nature of the biodegradation depended strongly on the experimental conditions. In the latter case, a differential scanning calorimetry analysis confirmed the importance of the applied norm on the state of the residual material. The consequences for improved methods of estimation of biodegradability of these materials are discussed.     

Abiotic Hydrolysis of Some Poly-D-glucaramides and Subsequent Microbial Utilization/Degradation

Carbohydrate acid amides, diamides and polyamides have been proposed to be utilized as nitrogen plant fertilizers or fertilizer components, and experiments with Brassica rapa demonstrated a positive biological response when these compounds were used as the only source of fixed nitrogen for plant growth. The present study was carried out with the aim of elucidating the mechanism of degradation of these polymers in both soil/compost and in liquid media and the role of microorganisms in this process. The results obtained suggest that a major route of degradation of polyglucaramides in the environment is their abiotic hydrolysis/release of the diacid and diamine building block units of these polymers, which are then utilized for growth by microorganisms. In cell-free crude extracts from enrichment cultures obtained with different poly-D-glucaramides, no enzyme activities catalyzing the release of diamines from these compounds were detected.     

Activation of waste MDF sawdust charcoal and its reactive dye adsorption characteristics

This paper reports an experimental investigation of converting waste medium density fibreboard (MDF) sawdust into chars and activated carbon using chemical activation and thermal carbonisation processes. The MDF sawdust generated during the production of architectural mouldings was characterised and found to have unique properties in terms of fine particle size and high particle density. It also has a high content of urea formaldehyde resin used as a binder in the manufacturing of MDF board. Direct thermal carbonisation and chemical activation of the sawdust by metal impregnation and acid (phosphoric acid) treatment prior to pyrolysis treatment were carried out. The surface morphology of the raw dust, its chars and activated carbon were examined using scanning electron microscopy (SEM). Adsorptive properties and total pore volume of the materials were also analysed using the BET nitrogen adsorption method. Liquid adsorption of a reactive dye (Levafix Brilliant red E-4BA) by the derived sawdust carbon was investigated in batch isothermal adsorption process and the results compared to adsorption on to a commercial activated carbon (Filtrasorb F400). The MDF sawdust carbon exhibited in general a very low adsorption capacity towards the reactive dye, and physical characterisation of the carbon revealed that the conventional chemical activation and thermal carbonisation process were ineffective in developing a microporous structure in the dust particles. The small size of the powdery dust, the high particle density, and the presence of the urea formaldehyde resin all contributed to the difficulty of developing a proper porous structure during the thermal and chemical activation process. Finally, activation of the dust material in a consolidated form (cylindrical pellet) only achieved very limited improvement in the dye adsorption capacity. This original study, reporting some unexpected outcomes, may serve as a stepping-stone for future investigations of recycle and reuse of the waste MDF sawdust which is becoming an increasing environmental and cost liability.     

Characterizing the transformation and transfer of nitrogen during the aerobic treatment of organic wastes and digestates

The transformation and transfer of nitrogen during the aerobic treatment of seven wastes were studied in ventilated air-tight 10-L reactors at 35 °C. Studied wastes included distinct types of organic wastes and their digestates. Ammonia emissions varied depending on the kind of waste and treatment conditions. These emissions accounted for 2–43% of the initial nitrogen. Total nitrogen losses, which resulted mainly from ammonia emissions and nitrification–denitrification, accounted for 1–76% of the initial nitrogen. Ammonification was the main process responsible for nitrogen losses. An equation which allows estimating the ammonification flow of each type of waste according to its biodegradable carbon and carbon/nitrogen ratio was proposed. As a consequence of the lower contribution of storage and leachate rates, stripping and nitrification rates of ammonia nitrogen were negatively correlated. This observation suggests the possibility of promotingnitrification in order to reduce ammonia emissions.     

Carbon dioxide utilization with carbonation using industrial waste-desulfurization gypsum and waste concrete

In this study, we propose a process making calcium carbonate and calcium sulfate and recovering absorbent using ammonia absorbent, carbon dioxide, and industrial waste. The main objective of this study is to confirm the possibility of carbon capture and utilization based on waste materials. We assumed desulfurization gypsum and construction waste (ready mixed concrete washing water, waste concrete, etc.) are CaSO₄, Ca(OH)₂, respectively. And concentration of simulated carbon dioxide gas was 15 vol% similar to flue gas. Calcium carbonate was produced by combination reaction between ionic CO₂ in absorbent and metal ion in the solid waste. Experiments were conducted at normal temperature and pressure. Furthermore, the generated products were characterized by X-ray diffraction, and scanning electron microscope.     

木材胶粘剂生产中的污染及防治

阐述了木材胶粘剂－脲醛树脂胶粘剂（ＵＦ）,密胺甲醛树脂胶粘剂（ＭＦ）,酚醛树脂胶粘剂（ＰＦ）生产过程中产生的废气,釜垢及碱洗废液的污染,提出了从工艺上改善排放条件及治理的方法,同时提出了控制产品中游离甲醛的方法。     

Characterization of Compost from a Pilot Plant-scale Composter Utilizing Simulated Solid Waste

A pilot plant-scale composter using simulated solid waste was developed to test the fate of consumer products such as disposable diapers. The simulated waste consisted of a mixture of rabbit chow (which included alfalfa), shredded newspaper, sand, and composted cow manure. The compost mass self-heated from an ambient temperature of 27°C to about 55°C in the first 24 h. Dissolved ammonia levels, high in the early stages of the process, began to decrease after about 4 weeks as nitrate concentration began to increase. Both volatile solids and carbon:nitrogen ratios exhibited gradual decreases with time. Microbial biomass, esterase activity, cellulose mineralization, direct microscopic counts (AODC), and relative APIZYM enzyme activity increased significantly in the first several days, and maintained higher levels than initial measurements throughout the 22-week testing period. We concluded that the simulated solid waste underwent physical, chemical, and microbiological changes that would be expected to occur in municipal solid waste in a full-scale composting system. The pilot plant-scale composter should prove to be a valuable tool in assessing the fate of products and materials under simulated compost conditions.     

基于固态碳源的自养-异养耦合生物脱氮工艺研究

采用基于固态碳源的厌氧氨氧化与反硝化耦合脱氮工艺处理高氮低碳的金属热处理废水。通过接种城市生活污水处理厂剩余污泥和厌氧氨氧化絮状污泥,研究了以固态碳源（3-羟基丁酸脂和3-羟基戊酸脂共聚物,PHBV）和沸石为组合填料的分区式耦合反应器的启动和运行特性。经过76 d的运行,耦合反应器的总氮去除速率达1.05 kg/（m³·d）,且具有良好的出水COD稳定性。废水经过反应器沸石区后,氨氮去除率达97%,亚硝态氮去除率达81%,而硝态氮去除率几乎为零;经过PHBV区后,硝态氮去除率达76%,亚硝态氮去除率达99%,氨氮去除率达97%。沸石区主要进行厌氧氨氧化反应,PHBV区主要进行反硝化反应,功能分区明确,耦合效果较好。     

可见光下氮掺杂罗丹明B分子印迹TiO_2的选择性光催化性能

采用溶胶-凝胶法和分子印迹技术,以尿素为氮源、罗丹明B为模板分子制备了氮掺杂罗丹明B分子印迹TiO_2粉末(N-TiO_2-RhB),并对样品进行了XRD、UV-Vis DRS和BET表征。表征结果显示:氮掺杂和分子印迹一定程度改善了样品的孔隙结构和孔径分布,N-TiO_2-RhB的比表面积和孔体积分别为TiO_2的1.9倍和1.5倍;氮掺杂使TiO_2的光吸收带边发生红移,而分子印迹不能改变催化剂的光吸收带边。N-TiO_2-RhB具有最佳的可见光活性和选择性,对罗丹明B的降解率高达92.7%。对罗丹明B、罗丹明6G、甲基紫和甲基绿的降解过程均符合一级反应动力学方程。     

Ion-Radical Conversions in Main or Side Chains of Nitrogen-Containing Polymers in Nitrogen Dioxide Atmosphere

Mechanism of nitrogen dioxide interaction with polymers containing amide and imide groups in the main or side chains of macromolecules (polycaproamide, polyvinylpyrrolidone, poly-m-phenylene isophthalamide and polypyromellitimide) is considered. The initiators of conversions of polymers of the given classes are not monoradicals of nitrogen dioxide rather than its equilibrium dimers in the form of nitrosyl nitrate. In primary oxidizing reaction of an electron transfer from donor groups of macromolecules to nitrosyl nitrate, radical cations, nitric oxide and nitrate anion are formed, which in the subsequent reactions give products of nitration and nitrosation. These products are precursors of stable acylalkylaminoxyl, acylarylaminoxyl, iminoxyl macroradicals. The specific interactions of nitrogen dioxide dimers with functional groups of macromolecules determine features of the mechanism of ion-radical conversions of the polymers and the composition of radical and molecular products. The direct detection of radical cations has been realized by ESR method for confirmation of the ion-radical initiation concept using model reaction of nitrogen dioxide with triphenylamine.     

掺硼金刚石电极降解模拟焦化废水中的喹啉

采用掺硼金刚石（BDD）电极电化学氧化法降解模拟焦化废水中的喹啉，并通过GC-MS技术分析了喹啉的降解机理及途径。实验结果表明：在常温、初始喹啉质量浓度为50.0 mg/L、电解质Na₂SO₄浓度为0.05 mol/L、模拟废水pH为7、电解时间为2.5 h、电流密度为30 mA/cm²、极板总面积与模拟废水体积的比为160 cm²/cm³的条件下，喹啉降解率接近100%;TOC由初始时的29.43 mg/L降至5.76 mg/L，TOC去除率达80%;COD由初始时的95.25 mg/L降至20.65 mg/L，COD去除率达78%;在降解过程中，首先在喹啉苯环的5位和8位发生羟基化反应，然后苯环发生断裂，形成带有吡啶环的中间产物及羧酸类产物，最后氮杂环开环，生成二氧化碳和水。     

Optimization of Poly(<Emphasis Type="SmallCaps">dl</Emphasis>-Lactic Acid) Degradation and Evaluation of Biological Re-polymerization

Poly(dl-lactic acid) or PLA is a biodegradable polymer. It has received much attention since it plays an important role in resolving the global warming problem. The protease produced by Actinomadura keratinilytica strain T16-1 was previously reported as having PLA depolymerase potential and being applicable to PLA biodegradation, which was used in this work. Therefore, this research demonstrates the important basic knowledge on the biological degradation process by the crude PLA-degrading enzyme from strain T16-1. Its re-polymerization was evaluated. The optimization of PLA degradation by statistical methods based on central composite design was determined. Approximately 6700 mg/l PLA powder was degraded by the crude enzyme under optimized conditions: an initial enzyme activity of 200 U/ml, incubated at 60 °C for 24 h released 6843 mg/l lactic acid with 82% conversion, which was similar to the commercial enzyme proteinase K (81%). The degradable products were re-polymerized repeatedly by using commercial lipase as a catalyst under a nitrogen atmosphere for 6 h. A PLA oligomer was achieved with a molecular weight of 378 Da (n = 5). This is the first report to demonstrate the high efficiency of the enzyme to degrade 100% of PLA powder and to show the biological recycling process of PLA, which is promising for the treatment and utilization of biodegradable plastic wastes in the future.     

Emission of Volatiles from Polymers — A New Approach for Understanding Polymer Degradation

Emission of low molar mass compounds from different polymeric materials was determined and the results from the volatile analysis were applied to predict the degree of degradation and long-term properties, to determine degradation rates and mechanisms, to differentiate between biotic and abiotic degradation and for quality control work. Solid-phase microextraction and solid-phase extraction together with GC-MS were applied to identify and quantify the low molar mass compounds. Volatiles were released and monitored at early stages of degradation before any matrix changes were observed by e.g. SEC, DSC and tensile testing. The analysis of volatiles can thus also be applied to detect small differences between polymeric materials and their susceptibility to degradation. The formation of certain degradation products correlated with the changes taking place in the polymer matrix, these indicator products could, thus, be analysed to rapidly predict the degree of degradation in the polymer matrix and further to predict the long-term properties and remaining lifetime of the product.     

The effects of apple pomace,bentonite and calcium superphosphate on swine manure aerobic composting

The effects of additives such as apple pomace, bentonite and calcium superphosphate on swine manure composting were investigated in a self-built aerated static box (90 L) by assessing their influences on the transformation of nitrogen, carbon, phosphorous and compost maturity. The results showed that additives all prolonged the thermophilic stage in composting compared to control. Nitrogen losses amounted to 34–58% of the initial nitrogen, in which ammonia volatilization accounted for 0.3–4.6%. Calcium superphosphate was helpful in facilitating composting process as it significantly reduced the ammonia volatilization during thermophilic stage and increased the contents of total nitrogen and phosphorous in compost, but bentonite increased the ammonia volatilization and reduced the total nitrogen concentration. It suggested that calcium superphosphate is an effective additive for keeping nitrogen during swine manure composting.