Interaction of radiation fog with tall vegetation

A one-dimensional radiation fog model is presented. It is coupled with a second model to include the effects of tall vegetation. The fog model describes in detail the dynamics, thermodynamics, and microphysical structure of a fog, as well as the interactions with the atmospheric radiative transfer. A two-dimensional joint size distribution for the aerosol particles and activated fog droplets is used, the activation of aerosol particles is explicitly modeled.The implications of the presence of tall vegetation on the state of the atmosphere and on the evolution of radiation fog are stated. It is shown that the existence of tall vegetation impedes the evolution of radiation fog. The life cycle of radiation fog is discussed. The input of fog water and associated aerosol particles onto the vegetation surfaces via fog water interception processes is assessed.     

Characterization of polycyclic aromatic hydrocarbons deposition in PM2.5 and cloud/fog water at Mount Taishan (China)

Polycyclic aromatic hydrocarbons (PAHs) in PM2.5 and cloud/fog water samples were collected at Mount Taishan in an autumn–winter period, and were analyzed by GS-MS. Higher molecular weight PAHs (4–6 rings) predominated in PM2.5 samples, whereas lighter PAH compounds contributed 61.71% of the total PAH concentration in cloud/fog samples. Particles tended to contain more PAHs and have a more intensive influence on the atmospheric environment on colder days. During cloud/fog events, the scavenging ratio based on PAHs associated with particles was estimated to be about 13.45%. PAHs in PM2.5 samples had a significant positive relationship with CO and SO₂, suggesting that PAHs, SO₂, and CO may originated from the same sources, such as residential coal combustion activities. Diagnostic ratio analysis and factor analysis indicated that the sources of PAHs were mainly from coal combustion during this period.     

Seasonal trend of fog water chemical composition in the Po Valley

Fog frequency in the Po Valley, Northern Italy, can be as high as 30% of the time in the fall-winter season. High pollutant concentrations have been measured in fog water samples collected in this area over the past few years. The combined effects of high fog occurrence and high pollutant loading of the fog droplets can determine, in this area, appreciable chemical deposition rates. An automated station for fog water collection was developed, and deployed at the field station of S. Pietro Capofiume, in the eastern part of the Po Valley for an extended period: from the beginning of November 1989 to the end of April 1990. Time-resolved sampling of fog droplets was carried out during all fog events occurring in this period, and chemical analyses were performed on the collected samples. Statistical information on fog occurrence and fog water chemical composition is reported in this paper, and a tentative seasonal deposition budget is calculated for H+, NH4+, NO3- and SO4(2-) ions. The problems connected with fog droplet sampling in sub-freezing conditions are also addressed in the paper.     

Oxidative degradation of dimethylsulfoxide by locally concentrated hydroxyl radicals in streamer corona discharge process

This study systematically investigates the characteristic degradation behaviors of dimethylsulfoxide (DMSO) by the streamer corona discharge process (SCDP) in water. The analysis of the oxidized intermediates of DMSO shows that hydroxyl radical (*OH) is the main oxidant responsible for the degradation of DMSO in the SCDP. The various experiments on the degradation and mineralization of DMSO, and the effect of the *OH scavenger suggest that the SCDP produces locally concentrated *OHs in and around the plasma channel. This explanation was also supported by the formation of H(2)O(2) and the effect of the *OH scavenger on the H(2)O(2) production rate in the SCDP. Based on the kinetic data for the degradation of DMSO and the production of H(2)O(2) in the SCDP, the volume of the active region in which the *OHs are concentrated, and the effective concentration of *OH in that region were estimated to be 0.21 microl and 5.0 x 10(-3)M, respectively. This level of *OH concentration in the SCDP is approximately 10(7)-10(9) times higher than that generated in ordinary advanced oxidation processes using *OH. The ramifications of the results obtained in this study on successful water treatment using the SCDP are also discussed.     

Spatial and temporal variations in San Joaquin Valley fog chemistry

Fog was sampled at four locations in California’s San Joaquin Valley (SJV) during December 1995 and January 1996 as part of the 1995 Integrated Monitoring Study (IMS95). The fog sampling campaign was conducted in two phases. During the first phase, fog was sampled at three southern SJV surface locations, two urban (Fresno and Bakersfield) and one rural (near the Kern Wildlife Refuge). Both bulk samples (representative of the entire fog drop spectrum) and size-fractionated samples were collected. During the second phase, bulk fog samples were collected at three elevations on a 430 m television transmission tower in the northern SJV, representing some of the first observations of vertical variations in fog composition. SJV fog was observed to be consistently alkaline. The median pH measured in the southern SJV was 6.49, with a range from 4.97 to 7.43. Dominant species in the fog water were ammonium (median southern SJV concentration of 1008 microequivalents/l (μN)), nitrate (483 μN), sulfate (117 μN), acetate (117 μN), formate (63 μN), and formaldehyde (46 μM). Concentrations of the inorganic ions were similar in the urban and rural fogs, although occasionally much higher spikes of S(IV) and sulfate were observed in Bakersfield fog. Acetate, formaldehyde, and total organic carbon, by contrast, were observed to be present in greater concentration in the urban fogs. Bakersfield IMS95 fog concentrations of most species were similar to those measured there in the early 1980s, although concentrations of S(IV) and sulfate were much lower in IMS95 fogs. Significant differences were found between the composition of large and small fog drops, with pH differences at times exceeding one pH unit. The chemical heterogeneity present among SJV fog drop populations is likely to result in significant enhancement of aqueous sulfate production rates over those expected from average fog properties. Significant vertical variations were also observed in fog composition. Liquid water content was observed to increase strongly with elevation, while major ion aqueous concentrations in fog drops decreased with altitude. The total amount of solute contained within the fog (per unit volume of air) was observed to increase with altitude. These observations form a unique data set to be used for model evaluation and for further analysis of aerosol processing by fogs.     

Separate chemical characterizations of fog water,aerosol, and gas before,during, and after fog events near an industrialized area in Japan

Fog water, aerosol, and gas were separately collected at Mt. Rokko (altitude 931 m) in Kobe, Japan, using a new sampling method at a mountainous site near a highly industrialized area. The fog water was collected by an active string-fog collector and the aerosol and gas by using the filter pack method. Using plural filter packs and controlling or switching the airflow before, during, and after a fog event made it possible to collect the fog water, aerosol, and gas separately. Nitrate species such as NO₃⁻(p) and HNO₃(g) were effectively scavenged by fog water, while sulfur species such as SO₄²⁻(p) and SO₂(g) could not be easily and effectively scavenged because of the poor solubility of SO₂(g). This difficulty was experimentally examined through an in situ investigation. Ion species (especially Na⁺(p) and Ca²⁺(p)) which form coarse particles were easily and effectively scavenged by fog water. On the other hand, the difficulty of scavenging Mg²⁺(p) could not be explained by particle size.     

Drop size-dependent chemical composition of clouds and fogs. Part II: Relevance to interpreting the aerosol/trace gas/fog system

Size-resolved fog drop chemical composition measurements were obtained during a radiation fog campaign near Davis, California in December 1998/January 1999 (reported in Reilly et al., Atmos. Environ. 35(33) (2001) 5717; Moore et al., Atmos. Environ. this issue). Here we explore how knowledge of this size-dependent drop composition—particularly from the newly developed Colorado State University 5-Stage cloud water collector—helps to explain additional observations in the fog environment. Size-resolved aerosol measurements before and after fog events indicate relative depletion of large (>2 μm in diameter) particles during fog accompanied by a relative increase in smaller aerosol particle concentrations. Fog equivalent air concentrations suggest that entrainment of additional particles and in-fog sedimentation contributed to observed changes in the aerosol size distribution. Calculated deposition velocities indicate that sedimentation was an important atmospheric removal mechanism for some species. For example, nitrite typically has a larger net deposition velocity than water and its mass is found preferentially in the largest drops most likely to sediment rapidly. Gas–liquid equilibria in fog for NO₃⁻/HNO₃, NH₄⁺/NH₃, and NO₂⁻/HONO were examined. While these systems appear to be close to equilibrium or relative equilibrium during many time periods, divergences are observed, particularly for low liquid water content (<0.1 g m⁻³) fogs and in different drop sizes. Knowledge of the drop size-dependent composition provided additional data useful to the interpretation of these deviations. The results suggest that data from multi-stage cloud water collectors are useful to understanding fog processes as many depend upon drop size.     

Degradation mechanism of t-butyl methyl ether (MTBE) in atmospheric droplets

The aim of this study was to obtain information about the degradation of t-butyl methyl ether (MTBE; (CH(3))(3)C-O-CH(3)) in atmospheric water droplets (rain, clouds, fog). These water droplets contain hydrogen peroxide and iron ions, which are a source of the powerful oxidising radical OH degrees, particularly under solar irradiation (photo-Fenton reaction). MTBE was chosen for this work because of its current use as an oxygenated additive in gasoline.In this study we found that MTBE is not stable in the atmosphere. More than 15 intermediate products were identified, five of which were quantified (t-butyl formate (TBF), methyl acetate (MA), t-butyl alcohol (TBA), acetone (AC), formaldehyde). The evaluation of the disappearance kinetic of the main intermediate compounds shows the following activity pattern k((TBA))>k((MTBE))>k((TBF)),k>((AC)). Acetone was found to be about 15 times more stable than MTBE in atmospheric conditions. The degradation pathways are discussed on the basis of these identifications and on the degradation of the main intermediate products in similar conditions to MTBE.     

Hydroxyl radical concentration profile in photo-Fenton oxidation process: generation and consumption of hydroxyl radicals during the discoloration of azo-dye Orange II

Dynamic behaviors of hydroxyl (OH) radical generation and consumption in photo-Fenton oxidation process were investigated by measuring OH radical concentration during the discoloration of azo-dye Orange II. The effects of operating parameters for photo-Fenton discoloration, i.e. dosages of H₂O₂ and Fe, initial dye concentration, solution pH and UV irradiation, on the generation and consumption of OH radicals playing the main role in advanced oxidation processes were extensively studied. The scavenger probe or trapping technique in which coumarin is scavenger of OH radical was applied to estimate OH radical concentration in the photoreactor during the photo-Fenton discoloration process. The OH radical generation was enhanced with increasing the dosages of Fenton regents, H₂O₂ and Fe. At the initial stage of photo-Fenton discoloration of Orange II, the OH radical concentration rapidly increased (Phase-I) and the OH radical concentration decreased after reaching of OH radical concentration at maximum value (Phase-II). The decrease in OH radical concentration started when the complete discoloration of Orange II was nearly achieved and the H₂O₂ concentration became rather low. The dynamic behavior of OH radical concentration during the discoloration of Orange II was found to be strongly linked with the change in H₂O₂ concentration. The generation of OH radical was maximum at solution pH of 3.0 and decreased with an increase of solution pH. The OH radical generation rate in the Fenton Process was rather slower than that in the photo-Fenton process.     

Contribution of transboundary air pollution to ionic concentrations in fog in the Kinki Region of Japan

To estimate the contribution of transboundary transported air pollutants from other Asian countries to Japan in ionic concentrations in fog water in March 2005, the Community Multiscale Air Quality (CMAQ) modeling system was utilized with meteorological fields produced by the 5th generation Mesoscale Model (MM5). For meteorological predictions, the model well reproduced the surface meteorological variables, particularly temperature and humidity, and generally captured fog occurrence. For chemical predictions, most of the model-predicted monthly mean concentrations were approximately within a factor of 2 of the observations, indicating that the model well simulated the long-range atmospheric transport from the Asian Continent to Japan. For SO₄^2?, NO₃^? and NH₄⁺, the contribution rates of the transboundary air pollution in the Kinki Region of Japan ranged from 69 to 82% for aerosols, from 47 to 87% for ionic concentrations in rain, and from 55 to 79% for ionic concentrations in fog. The study found that the transboundary air pollution also affected ionic concentrations in fog as well as aerosol concentrations and ionic concentrations in rain.     

Automobile exhaust gas as a source of aqueous phase OH radical in the atmosphere and its effects on physiological status of pine trees

Free radical generation potential of automobile exhaust gas was examined by measuring hydroxyl (OH) radical photo-formation rates in exhaust gas-scrubbing water. Effects of automobile exhausts on physiological status of Japanese red pine trees (Pinus densiflora Sieb. et Zucc.) were also investigated to elucidate the mechanism how the free radicals derived from exhaust gas damage higher plants. Gasoline and diesel exhaust gases were scrubbed into pure water. Potential photo-formation rates of OH radical in aqueous phase (normalized to sun light intensity of clear sky midday on May 1 at 34°N) for gasoline and diesel cars were ave. 51 and 107 μM h⁻¹ m⁻³ of exhaust gas, respectively. Nitrite was a dominant source (ca. 70-90%) of photochemical formation of OH radical in both gasoline and diesel car exhausts. The scrubbed solution of diesel car exhaust gas was sprayed for six times per week to needles of pine tree seedlings in open top chambers. Control, exhaust + mannitol (added as OH radical scavenger), and nitrite + nitrate standard solution (equivalent levels existed in the exhaust gas) were also sprayed. Two months sprays indicated that the sprayed solutions of diesel exhaust and nitrite + nitrate caused a decrease of maximum photosynthetic rate and stomata conductance in pine needles while the control and exhaust + mannitol solution showed no effects on photosynthetic activities of pine needles. These results indicated that OH radicals generated mainly from photolysis of nitrite occurring in the scrubbing solution of exhaust gas are responsible for the decrease of photosynthetic activities of pine needles.     

Production and removal of aerosol in a polluted fog layer: model evaluation and fog effect on PM

A radiation fog physics, gas- and aqueous-phase chemistry model is evaluated against measurements in three sites in the San Joaquin Valley of California (SJV) during the winter of 1995. The measurements include for the first time vertically resolved fog chemical composition measurements. Overall the model is successful in reproducing the fog dynamics as well as the temporal and spatial variability of the fog composition (pH, sulfate, nitrate, and ammonium concentrations) in the area. Sulfate production in the fog layer is relatively slow (1–4 μg m⁻³ per fog episode) compared to the episodes in the early 1980s because of the low SO₂ concentrations in the area and the lack of oxidants inside the fog layer. Sulfate production inside the fog layer is limited by the availability of oxidants in the urban areas of the valley and by SO₂ in the more remote areas. Nitrate is produced in the rural areas of the valley by the heterogeneous reaction of N₂O₅ on fog droplets, but this reaction is of secondary importance for the more polluted urban areas. The gas-phase production of HNO₃ during the daytime is sufficient to balance the nitrate removed during the nighttime fog episodes. Entrainment of air from the layer above the fog provides another source of reactants for the fog layer. Wet removal is one of most important processes inside the fog layer in SJV. We estimate based on the three episodes investigated during IMS95 that a typical fog episode removes 500–2000 μg m⁻² of sulfate, 2500–6500 μg m⁻² of nitrate, and 2000–3500 μg m⁻² of ammonium. For the winter SJV valley the net fog effect corresponds to reductions in ground ambient concentrations of 0.05–0.2 μg m⁻³ for sulfate, 3–6 μg m⁻³ for total nitrate, and 1–3 μg m⁻³ for total ammonium.     

Quantitation of Hydroxyl Radicals from Photolysis of Fe(III)-Citrate Complexes in Aerobic Water (5 pp)

Background For their high photoreactivity, Fe(III)-carboxylate complexes are important sources of H2O2 for some atmospheric and surface waters. Citrate is one kind of carboxylate, which can form complexes with Fe(III). In our previous study, we have applied Fe(III)-citrate complexes to degrade and decolorize dyes in aqueous solutions both under UV light and sunlight. Results have shown that carboxylic acids can promote the photodegradation efficiency. It is indicated that the photolysis of Fe(III)-citrate complexes may cause the formation of some reactive species (e. g. H2O2 and ·OH). This work is attempted to quantify hydroxyl radicals generated in the aqueous solution containing Fe(III)-citrate complexes and to interpret the photoreactivity of Fe(III)-citrate complexes for degrading organic compounds. Methods By using benzene as the scavenger to produce phenol, the photogeneration of ·OH in the aqueous solution containing Fe (III)-citrate complexes was determined by HPLC. Results and Discussion In the aqueous solution containing 60.0/30.0 mM Fe(III)/citrate and 7.0 mM benzene at pH 3.0, 96.66 mM ·OH was produced after irradiation by a 250W metal halide light (l ≥ 313 nm) for 160 minutes. Effects of initial pH value and concentrations of Fe(III) and citrate on ·OH radical generation were all examined. The results show that the greatest photoproduction of ·OH in the aqueous solution (pH ranged from 3.0 to 7.0) was at pH 3.0. The photoproduction of ·OH increased with increasing Fe(III) or citrate concentrations. Conclusion In the aqueous solutions containing Fe(III)-citrate complexes, ·OH radicals were produced after irradiation by a 250W metal halide light. It can be concluded that Fe(III)-citrate complexes are important sources of ·OH radicals for some atmospheric and surface waters. Recommendations and Outlook It is believed that the photolysis of Fe(III)-citrate complexes in the presence of oxygen play an important role in producing ·OH both in atmospheric waters and surface water where high concentrations of ferric ions and citrate ions exist. The photoproduction of ·OH has a high oxidizing potential for the degradation of a wide variety of natural and anthropogenic organic and inorganic substances. We can use this method for toxic organic pollutants such as organic dyes and pesticides.     

Chemistry of fog waters in California's Central Valley—Part 3: concentrations and speciation of organic and inorganic nitrogen

Although organic nitrogen (ON) has been found to be a ubiquitous and significant component in wet and dry deposition, almost nothing is known about its concentration or composition in fog waters. To address this gap, we have investigated the concentration and composition of ON in fog waters collected in Davis, in California's Central Valley. Significant quantities of dissolved organic nitrogen (DON) were found in these samples, with a median concentration of 303 μM N (range=120–1630 μM N). DON typically represented approximately 16% of the total dissolved nitrogen (inorganic+organic) in Davis fog waters. The median concentration of nitrogen in free amino acids and alkyl amines was 16 μM N (range=3.8–120 μM N), which accounted for 3.4% of the DON in Davis fogs. Thus, although the absolute concentrations of free amino compounds were significant, they were only a minor component of the DON pool. Combined amino nitrogen (e.g., proteins and peptides) was present at higher concentrations and accounted for 6.1–29% (median=16%) of DON. Overall, free and combined amino compounds typically accounted for a median value of 22% of DON in the fog waters.The high concentrations of DON found, and the fact that amino and other N-containing organic compounds can serve as nitrogen sources for microorganisms and plants, indicate that atmospheric ON compounds likely play an important role in nitrogen cycling in the Central Valley. In addition, due to the basicity of some N functional groups, ON compounds likely contribute to the previously observed acid buffering capacity of Central Valley fog waters. Finally, a comparison of fog waters with fine particles (PM_2.5) collected from the same site during the same period of time indicated that the median concentrations (mol N m⁻³-air) of total water-soluble ON, free amino nitrogen and total amino nitrogen were very similar in the fog water and PM_2.5. Given the high water solubility of many organic N compounds, this result suggests that ON might contribute to the hygroscopic properties of atmospheric particles.     

Evaluation of trace elements contamination in cloud/fog water at an elevated mountain site in Northern China

Totally 117 cloud/fog water samples were collected at the summit of Mt. Tai (1534 m a.s.l.)—the highest mountain in the Northern China Plain. The results were investigated by a combination of techniques including back trajectory model, regional air quality and dust storm models, satellite observations and Principal Component Analysis. Elemental concentrations were determined by Inductively Coupled Plasma Mass Spectrometry, with stringent quality control measures. Higher elemental concentrations were found at Mt. Tai compared with those reported by other overseas studies. The larger proportions and higher concentrations of toxic elements such as Pb and As in cloud/fog water compared with those in rainwater at Mt. Tai suggests higher potential hazards of cloud/fog water as a source of contamination in polluted areas to the ecosystem. Peak concentrations of trace elements were frequently observed during the onset of cloud/fog events when liquid water contents of cloud/fog water were usually low and large amount of pollutants were accumulated in the ambient air. Inverse relationship between elemental concentrations and liquid water contents were only found in the samples with high electrical conductivities and liquid water contents lower than 0.3 g m⁻³. Affected mainly by the emissions of steel industries and mining activities, air masses transported from south/southwest of Mt. Tai were frequently associated with higher elemental concentrations. The element Mn is attributed to play an important role in the acidity of cloud/fog water. The composition of cloud/fog water influenced by an Asian dust storm event was reported, which was seldom found in the literature.     

Occurrence and sources of particulate nitro-polycyclic aromatic hydrocarbons in ambient air in Denmark

The occurrence of selected nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) associated with atmospheric particulate matter has been investigated at an urban site and at a semi-rural site. For this purpose an analysis method based on gas chromatography and tandem ion trap mass spectrometry has been developed and applied. The nitro-PAH levels have been compared with levels of other air pollutants including unsubstituted PAHs, inorganic gases and particulate matter, as well as with meteorological parameters. Correlations and concentration ratios suggest that the dominant source of 9-nitroanthracene at the urban site is direct emissions, whereas at the semirural site its dominant source is atmospheric formation. The atmospheric formation of 2-nitrofluoranthene and 2-nitropyrene generally seems to be initiated by OH radicals during the day rather than by NO₃ radicals at night. The average contribution of the OH initiated formation is estimated to be in the range of 90–100%. However, under wintertime conditions with cloudy weather implying low OH radical production, NO₃ radicals may also be important as initiators of nitro-PAH formation. Samples influenced by transport of polluted air masses from the European continent have significantly elevated concentrations of atmospherically formed nitro-PAHs. The directly emitted nitro-PAHs, 1-nitropyrene and 3-nitrofluoranthene, do not exhibit elevated levels during such long-range transport episodes.     

Pollution in coastal fog at Alto Patache,Northern Chile

Background  

The Atacama Desert in Northern Chile is one of the most arid places on earth. However, fog occurs regularly at the coastal mountain range and can be collected at different sites in Chile to supply settlements at the coast with freshwater. This is also planned in the fog oasis Alto Patache (20°49′S, 70°09′W). For this pilot study, we collected fog water samples in July and August 2008 for chemical analysis to find indications for its suitability for domestic use.     

Characterisation of polar organic compounds in fog water

In this paper the results of a systematic liquid chromatographic investigation are described to characterise water-soluble organic compounds in fog. A diode array detector is used to record the UV spectrum of the components during separation and a mass spectrometer is applied to obtain information on the ion masses of the constituents. The combination of UV and mass spectra reveal that the organic carbon content of fog water is distributed among a great number of acidic compounds which have polar functional groups and polyconjugated systems absorbing up to 500 nm. Due to the complexity of the organic fraction in fog water an unresolved hump of ions was recorded by the mass spectrometer from m/z=100–600 the most intense peaks being detected around m/z=200–250. Tannin and fulvic acid were also examined under the same conditions. In terms of complexity and ion distribution the mass spectrum of the organic fraction was similar to that of a fulvic acid reference material rather than to that of tannin.     

Internal acid buffering in San Joaquin Valley fog drops and its influence on aerosol processing

Although several chemical pathways exist for S(IV) oxidation in fogs and clouds, many are self-limiting: as sulfuric acid is produced and the drop pH declines, the rates of these pathways also decline. Some of the acid that is produced can be buffered by uptake of gaseous ammonia. Additional internal buffering can result from protonation of weak and strong bases present in solution. Acid titrations of high pH fog samples (median pH=6.49) collected in California's San Joaquin Valley reveal the presence of considerable internal acid buffering. In samples collected at a rural location, the observed internal buffering could be nearly accounted for based on concentrations of ammonia and bicarbonate present in solution. In samples collected in the cities of Fresno and Bakersfield, however, significant additional, unexplained buffering was present over a pH range extending from approximately four to seven. The additional buffering was found to be associated with dissolved compounds in the fogwater. It could not be accounted for by measured concentrations of low molecular weight (C₁–C₃) carboxylic acids, S(IV), phosphate, or nitrophenols. The amount of unexplained buffering in individual fog samples was found to correlate strongly with the sum of sample acetate and formate concentrations, suggesting that unmeasured organic species may be important contributors. Simulation of a Bakersfield fog episode with and without the additional, unexplained buffering revealed a significant impact on the fog chemistry. When the additional buffering was included, the simulated fog pH remained 0.3–0.7 pH units higher and the amount of sulfate present after the fog evaporated was increased by 50%. Including the additional buffering in the model simulation did not affect fogwater nitrate concentrations and was found to slightly decrease ammonium concentrations. The magnitude of the buffering effect on aqueous sulfate production is sensitive to the amount of ozone present to oxidize S(IV) in these high pH fogs.     

Severe leaching of calcium ions from fir needles caused by acid fog

We have measured the components of the throughfall under fir trees (Abies firma) in the field around Mt. Oyama, where the forest appears to be declining, for the period 1994-1998. Exposure experiments of a simulated acid fog to fir twigs were performed under field conditions. There was a similarity between the acid response in the field and that in the laboratory. In both studies, the severe leaching of calcium ions from the needle surface was caused by exposure to acid fog. We also applied acid fog to fir seedlings over 1 year and observed a decrease in the growth of the seedlings due to this application in the dormant season. These results suggest that the severe leaching of calcium ions due to acid fog may cause the deficiency of calcium and be responsible for the decline of the fir trees.