Chemical leasing: cooperative business models for sustainable chemicals management. Summary of research projects commissioned by the Austrian Federal Ministry of Agriculture, Forestry, Environment and Water Management

- Sustainable chemistry - Section editors: Klaus Günter Steinhäuser, Steffi Richter, Petra Greiner, Jutta Penning, Michael AngrickBackground, Aim and Scope Chemicals play a vital role in the day-to-day life of industrialised societies. Their use is not restricted to the chemical enterprises per se, but is a crucial part of production processes in a lot of industrial sectors. Traditional instruments of environmental policy (such as bans, restrictions) can only deal with the most hazardous substances. The Johannesburg Implementation Plan of 2002 calls for more sustainable patterns of production and consumption, and sets the year of 2020 as a goal to use chemicals in a way that human health and the environment are not endangered. Political instruments should not only gather more knowledge about the properties of chemicals, but should also stimulate the environmentally sound use of chemicals. Existing business models should therefore be reviewed in relation to this strategic approach to encourage marketing options with respect to the environmental focus.Main Features Business models were examined for their effects on the consumption of chemicals and amount of waste emissions in relation to their economic potential. Different possibilities for cooperation of supplier, user and disposal companies were elaborated and examined with a view to the specific situation in Austria.Results and Discussion A range of cooperative models – summarised under the term ‘chemical leasing’ - was identified, which can contribute to a more efficient use of resources. 12 main possible application areas (cleaning, lubrication, paint stripping and others) have been identified in Austria. If chemical leasing models were applied in these areas, the amounts of chemicals currently used could be reduced by one third (53,000 tonnes per year). Cost reductions of up to 15 % can be expected.Conclusion The application of chemical leasing models can contribute considerably to achieving more sustainable and resource-efficient patterns of production. The Austrian Ministry for Environment has therefore decided to subsidise the further practical implementation of these new service-oriented business models. Pilot projects in 4 enterprises, which are supervised by consulting companies, are currently being carried out. Recommendation and Outlook The experiences of the pilot projects will serve as valuable building blocks for the wider use of chemical leasing models. Furthermore, the UNIDO Cleaner Production Centres have expressed their clear interest and will examine the possibility to use chemical leasing as a part of their Cleaner Production Programmes.     

Principles and perspectives

BACKGROUND, AIM AND SCOPE: With respect to the enormous increase of chemical production in the last decades and the tens of thousands of individual chemicals on the market, the permanent improvement of chemical management is a permanent target to achieve the goals of sustainable consumption and production set by the WSSD in Johannesburg 2002. MAIN FEATURES: Several approaches exist to describe sustainability of chemistry. However, commonly agreed criteria are still missing. There is no doubt that products of modern chemistry help to achieve important goals of sustainability and that significant improvements have occurred regarding direct releases from production sites, but several facts demonstrate that chemistry is far from being sustainable. Still too many chemicals exhibit hazardous characteristics and pose a risk to health and environment. Too many resources are needed to produce chemicals and finished products. RESULTS AND CONCLUSION: Therefore, a strategy for sustainability of chemistry should be developed which comprises the following main elements: 1. Sustainable chemicals: sustainable chemical management includes a regulatory framework which makes no difference between new and existing chemicals, contains efficient information flow through the supply chain which allows users to handle chemicals safely and offers an authorisation procedure and/or an efficient restriction procedure for substances of high concern. This regulatory scheme should promote the development of inherently safe chemicals. 2. Sustainable chemical production: Sustainable chemical production needs the development and implementation of emerging alternative techniques like selective catalysis, biotechnology in order to release less CO2 and less toxic by-products, to save energy and to achieve higher yields. Information exchange on best available techniques (BAT) and best environmental practices (BEP) may help to promote changes towards more sustainability. 3. Sustainable products: An integrated product policy which provides a framework for sustainable products promotes the development of products with a long-term use phase, low resource demand in production and use, low emission of hazardous substances and properties suitable for reuse and recycling. This may be promoted by eco-labelling, chemical leasing concepts and extended information measures to enhance the demand of consumers and various actors in the supply chain for sustainable products. RECOMMENDATION AND PERSPECTIVE: Important tools for the promotion of sustainable chemistry are the abolition of barriers for innovation in legislation and within the chemical industry, more transparency for all users of chemical products, a new focus on sustainability in education and research, and a new way of thinking in terms of sustainability.     

Green Chemistry - Views and Strategies * (5 pp)

Background and Goal The object of Green Chemistry is the reduction of chemical pollutants flowing to the environment. The Chemistry and the Environment Division of EuCheMS has assumed Green Chemistry as one of its areas of interest, but one question to solve is where Green Chemistry should be placed within the context of Chemistry and the Environment. The concept of Green Chemistry, as primarily conceived by Paul Anastas and John Warner, is commonly presented through the Twelve Principles of Green Chemistry. However, these Twelve Principles, though fruit of a great intuition and common sense, do not provide a clear connection between aims, concepts, and related research areas of Green Chemistry. These two unsolved questions are the object of the present article.Discussion Green Chemistry is here placed as a part of Chemistry for the Environment, concerning the still non-existent pollutants. Indeed, the object of Green Chemistry is the reduction of pollution and risks by chemicals by avoiding their generation or their introduction into the biosphere. The distinction between pollutant chemicals and dangerous chemicals, along with the consideration of the exhaustion of fossil resources and the acknowledgement of the harmful effects of the chemicals employed in a great variety of activities, leads to the recognition of four general objectives for Green Chemistry. In order to accomplish these general objectives, a number of strategies, or secondary objectives and some fundamental concepts, namely, atomic economy, selectivity, potential harm or historical harm can be visualized. A connection is finally established between the strategies and current and future research areas of Green Chemistry.Conclusion The ultimate aim of green chemistry is to entirely cut down the stream of chemicals pouring into the environment. This aim seems unattainable at present, but progress in the green chemical research areas and their application through successive approaches will certainly provide safer specialty chemicals and much more satisfactory processes for the chemical industry.- * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on ‘Chemistry and Environment’, 29 August to 1 September 2004, Bordeaux, France.     

Indicators for Chemicals: Sources,impacts and policy performance (5 pp)

Background Different types of indicators have been developed to describe the impact of chemicals on society and environment. Due to the high number of substances and their different types of use, most of these indicators are directed to specific areas of interest – regarding workplace safety, environmental health or consumer health. They address a specific subset of chemicals and can be used for monitoring enterprise-specific, national or international management measures. Main Features A survey of existing indicators for chemicals has shown that indicators already exist for a remarkable number of problem fields. As soon as the release and the environmental fate of chemicals are taken into account, the complexity of the approaches increases considerably. The distinction between indicators for drivers, pressures, state, impacts and responses, as proposed by the European Environmental Agency, supports the identification of proper indicators for a specific type of problem. Discussion and Conclusions. No single indicator exists which is able to cover the whole range of chemicals and their applications. Several indicator approaches cover at least a subset of the most relevant substances. If they are intended to be used for European monitoring, robust data must be provided by EU Member States. Chemicals in enterprises (ancillary inputs as well as process chemicals) are an important element of in-plant material flow management – in terms of occupational safety and health as well as environmental protection. Existing indicators for hazardous chemicals can be a valuable tool for process and product refinement regarding hazardous chemicals, especially for enterprises. Outlook Indicators for production and impact of chemicals, as well as policy performance indicators, are essential elements in order to monitor the management of chemicals. They have to be established for the national and for the EU level.     

The Application of Chemical Leasing Business Models in Mexico

- DOI: http://dx.doi.org/10.1065/espr2006.02.294 Background, Aim and Scope. To better address the requirements of the changing multilateral order, the United Nations Industrial Development Organization (UNIDO) Cleaner Production Programme, in 2004, developed the new Sustainable Industrial Resource Management (SIRM) approach. This approach is in accordance with the principles decided at the United Nations Conference on Environment and Development (UNCED) in Rio de Janeiro, Brazil in 1992. Unlike the traditional approaches to environmental management, the SIRM concept captures the idea of achieving sustainable industrial development through the implementation of circular material and energy flows in the entire production chain and reduction of the amount of material and energy used with greater efficiency solutions. The SIRM approach seeks to develop new models to encourage a shift from selling products to supplying services, modifying, in this manner, the supplier/user relationship and resulting in a win-win situation for the economy and the environment. Chemical Leasing represents such a new service-oriented business model and is currently being promoted by UNIDO′s Cleaner Production Programme. Main Features. One of the potential approaches to address the problems related to ineffective use and over-consumption of chemicals is the development and implementation of Chemical Leasing business models. These provide concrete solutions to the effective management of chemicals and on the ways negative releases to the environment can be reduced. The Chemical Leasing approach is a strategy that addresses the obligations of the changing international chemicals policy by focusing on a more service-oriented strategy. Mexico is one of the countries that were selected for the implementation of UNIDO's demonstration project to promote Chemical Leasing models in the country. The target sector of this project is the chemical industry, which is expected to shift their traditional business concept towards a more service and value-added approach. This is being achieved through the development of company specific business models that implement the above-indicated Chemical Leasing concept with the support from the Mexican National Cleaner Production Centre (NCPC). Results and Conclusions. The implementation of Chemical Leasing in Mexico has proven to be an efficient instrument in enhancing sustainable chemical management and significantly reducing emissions in Mexico. Several companies from the chemical industrial sector implement or agreed to implement chemical leasing business models. Based on the positive findings of the project, several Mexican companies started to negotiate contents of possible Chemical Leasing contracts with suitable business partners. The project further aimed at disseminating information on Chemical Leasing. It successfully attracted globally operating companies in the chemicals sector to explore possibilities to implement Chemical Leasing business models in Mexico. At the international level, the results of the UNIDO project were presented on 20TH September 2005 during a side event of the Strategic Approach to International Chemicals Management (SAICM) Preparation Conference in Vienna. Recommendations and Outlook. To facilitate the promotion and application of Chemical Leasing project at international level, UNIDO is currently developing a number of tools to standardize Chemical Leasing projects. These include, among others, Chemical leasing contract models; Chemical Leasing data base to find partners for chemical leasing; and guidelines to implement Chemical Leasing projects and work programmes.     

Life Cycle Assessment as Part of Sustainability Assessment for Chemicals (5 pp)

Background LCA is the only internationally standardized environmental assessment tool (ISO 14040-43) for product systems, including services and processes. The analysis is done ‘from cradle-to-grave’, i.e. over the whole life cycle. LCA is essentially a comparative method: different systems fulfilling the same function (serving the same purpose) are compared on the basis of a ‘functional unit’ - a quantitative measure of this function or purpose. It is often believed that LCA can be used for judging the (relative) sustainability of product systems. This is only partly true, however, since LCA is restricted to the environmental part of the triad ‘environment/ecology - economy - social aspects (including intergenerational fairness)’ which constitutes sustainability. Standardized assessment tools for the second and the third part are still lacking, but Life Cycle Costing (LCC) seems to be a promising candidate for the economic part. Social Life Cycle Assessment still has to be developed on the basis of known social indicators.Method and Limitations LCA is most frequently used for the comparative assessment or optimization analysis of final products. Materials and chemicals are difficult to analyse from cradle-to-grave, since they are used in many, often innumerable product systems, which all would have to be studied in detail to give a complete LCA of a particular material or substance! This complete analysis of a material or chemical is evidently only possible in such cases where one main application exists. But even if one main application does exist, e.g. in the case of surfactants (chemicals) and detergents (final products), the latter may exist in a great abundance of compositions. Therefore, chemicals and materials are better analysed ‘from cradle-to-factory gate’, leaving the analysis of the final product(s), the use phase and the ‘end-of-life’ phases to specific, full LCAs.Conclusion A comparative assessment of production processes is possible, if the chemicals (the same is true for materials) produced by different methods have exactly the same properties. In this case, the downstream phases may be considered as a ‘black box’ and left out of the assessment. Such truncated LCAs can be used for environmental comparisons, but less so for the (environmental) optimization analysis of a specific chemical: the phases considered as ‘black box’ and left out may actually be the dominant ones. A sustainability assessment should be performed at the product level and contain the results of LCC and social assessments. Equal and consistent system boundaries will have to be used for these life cycle tools which only together can fulfil the aim of assessing the sustainability of product systems.     

Chemical leasing in the context of sustainable chemistry

Chemical leasing is a new and innovative approach of selling chemicals. It aims at reducing the risks emanating from hazardous substances and ensuring long-term economic success within a global system of producing and using chemicals. This paper explores how, through chemical leasing, the consumption of chemicals, energy, resources and the generation of related wastes can be reduced. It also analyses the substitution of hazardous chemicals as a tool to protect environmental, health and safety and hence ensure compliance with sustainability criteria. For this, we are proposing an evaluation methodology that seeks to provide an answer to the following research questions: (1) Does the application of chemical leasing promote sustainability in comparison to an existing chemicals production and management system? 2. If various chemical leasing project types are envisaged, which is the most promising in terms of sustainability? The proposed methodology includes a number of basic goals and sub-goals to assess the sustainability for eight different chemical leasing case studies that have been implemented both at the local and the national levels. The assessment is limited to the relative assessment of specific case studies and allows the comparisons of different projects in terms of their relative contribution to sustainable chemistry. The findings of our assessment demonstrate that chemical leasing can be regarded as promoting sustainable chemistry in five case studies with certainty. However, on the grounds of our assessment, we cannot conclude with certainty that chemical leasing has equivalent contribution to sustainable chemistry in respect of three further case studies.     

Impact of three interactive Texas state regulatory programs to decrease ambient air toxic levels

The Federal Clean Air Act (FCAA) framework envisions a federal-state partnership whereby the development of regulations may be at the federal level or state level with federal oversight. The U.S. Environmental Protection Agency (EPA) establishes National Ambient Air Quality Standards to describe “safe” ambient levels of criteria pollutants. For air toxics, the EPA establishes control technology standards for the 187 listed hazardous air pollutants (HAPs) but does not establish ambient standards for HAPs or other air toxics. Thus, states must ensure that ambient concentrations are not at harmful levels. The Texas Clean Air Act authorizes the Texas Commission on Environmental Quality (TCEQ), the Texas state environmental agency, to control air pollution and protect public health and welfare. The TCEQ employs three interactive programs to ensure that concentrations of air toxics do not exceed levels of potential health concern (LOCs): air permitting, ambient air monitoring, and the Air Pollutant Watch List (APWL). Comprehensive air permit reviews involve the application of best available control technology for new and modified equipment and ensure that permits protect public health and welfare. Protectiveness may be demonstrated by a number of means, including a demonstration that the predicted ground-level concentrations for the permitted emissions, evaluated on a case-by-case and chemical-by-chemical basis, do not cause or contribute to a LOC. The TCEQ's ambient air monitoring program is extensive and provides data to help assess the potential for adverse effects from all operational equipment in an area. If air toxics are persistently monitored at a LOC, an APWL area is established. The purpose of the APWL is to reduce ambient air toxic concentrations below LOCs by focusing TCEQ resources and heightening awareness. This paper will discuss examples of decreases in air toxic levels in Houston and Corpus Christi, Texas, resulting from the interactive nature of these programs.

Implications: Texas recognized through the collection of ambient monitoring data that additional measures beyond federal regulations must be taken to ensure that public health is protected. Texas integrates comprehensive air permitting, extensive ambient air monitoring, and the Air Pollutant Watch List (APWL) to protect the public from hazardous air toxics. Texas issues air permits that are protective of public health and also assesses ambient air to verify that concentrations remain below levels of concern in heavily industrialized areas. Texas developed the APWL to improve air quality in those areas where monitoring indicates a potential concern. This paper illustrates how Texas engaged its three interactive programs to successfully address elevated air toxic levels in Houston and Corpus Christi.     

A Discussion of Regulatory Requirements and Air Dispersion Modeling Approaches Applicable to U.S. Chemical Demilitarization Facilities

ABSTRACT

Owners of hazardous waste treatment, storage, and disposal facilities, and certain major air pollution sources, must conduct several separate ambient air dispersion modeling analyses before beginning construction of new facilities or modifying existing facilities. These analyses are critical components of the environmental permitting and facility certification processes and must be completed to the satisfaction of federal, state, and local regulatory authorities.

The U.S. Army has conducted air dispersion modeling for its proposed chemical agent disposal facilities to fulfill the following environmental regulatory and risk management requirements: (1) Resource Conservation and Recovery Act human health and ecological risk assessment analysis for the hazardous waste treatment and storage permit applications, (2) Quantitative Risk Assessment to support the site-specific risk management programs, and (3) Prevention of Significant Deterioration ambient air impact analysis for the air permit applications. The purpose of these air dispersion modeling studies is to show that the potential impacts on human health and the environment, due to operation of the chemical agent disposal facilities, are acceptable. This paper describes and compares the types of air dispersion models, modeling input data requirements, modeling algorithms, and approaches used to satisfy the three environmental regulatory and risk management requirements listed above. Although this paper discusses only one industry (i.e., chemical demilitarization), the information it contains could help those in other industries who need to communicate to the public the purpose and objectives of each modeling analysis. It may also be useful in integrating the results of each analysis into an overarching summary of compliance and potential risks.     

Evaluation of EU risk assessments existing chemicals (EC Regulation 793/93)

An evaluation was performed on the first group (41) of completed risk assessments for chemicals of the EU priority lists (Existing Chemicals; EC Regulation 793/93). The evaluation focussed on the conclusions of the risk assessments. The EU risk assessment process detected a high number of substances of concern. Furthermore priority chemicals may pose potential risks to the whole range of protection goals of the risk assessment. The predictability of the risk assessments for priority chemicals was investigated. Our a priori knowledge on possible risks of priority chemicals is found to be poor, especially for consumers. Both for environment and human health the potential risks were linked with a broad spectrum of use patterns. It is concluded that no industry category can in advance be excluded from performing risk assessments. For a great number of chemicals, additional testing was found to be needed to finalize the risk assessment. This evokes questions about the completeness of the current base-set, but also about the suitability of some of the submitted human health tests that should initially fulfil the base-set needs. The results of this evaluation are useful for ongoing discussions on risk assessment processes for chemicals.     

Evaluation of a novel high throughput screening tool for relative emissions of industrial chemicals used in chemical products

Tens of thousands of chemicals are currently marketed worldwide, but only a small number of these compounds has been measured in effluents or the environment to date. The need for screening methodologies to select candidates for environmental monitoring is therefore significant. To meet this need, the Swedish Chemicals Agency developed the Exposure Index (EI), a model for ranking emissions to a number of environmental matrices based on chemical quantity used and use pattern. Here we evaluate the EI. Data on measured concentrations of organic chemicals in sewage treatment plants, one of the recipients considered in the EI model, were compiled from the literature, and the correlation between predicted emission levels and observed concentrations was assessed by linear regression analysis. The adequacy of the parameters employed in the EI was further explored by calibration of the model to measured concentrations. The EI was found to be of limited use for ranking contaminant levels in STPs; the r² values for the regressions between predicted and observed values ranged from 0.02 (p = 0.243) to 0.14 (p = 0.007) depending on the dataset. The calibrated version of the model produced only slightly better predictions although it was fitted to the experimental data. However, the model is a valuable first step in developing a high throughput screening tool for organic contaminants, and there is potential for improving the EI algorithm.     

Evaluating the use of occupational standards for controlling toxic air pollutants

Currently, the U.S. Environmental Protection Agency has established air standards for relatively few chemicals. As a result, state agencies are faced with controlling air contaminants for a large number of chemicals posing potential public health threats. Use of occupational standards as a basis for deriving ambient air guidelines is a method used by states to control air toxics. This standard development approach is reviewed by considering the differences in the health basis and numerical values which often occur among the occupational standards set by OSHA, NIOSH and ACGIH. This study indicated that careful selection should be made of the most appropriate occupational standard to use to protect public health. A comparison is made of chemicals regulated by various state air toxic programs using occupational standards lowered by a safety factor to concentrations established by the U.S. EPA. It was found that the air guidelines vary, but the degree of stringency can be comparable.     

The Precautionary Principle and Chemicals Regulation: Past Achievements and Future Possibilities (8 pages)

Background, Aim and Scope

The paper investigates the development of the institutional basis of the present modes of chemicals regulation and management, with special attention to interrelations with the precautionary principle. Main Features: The paper elucidates on how the precautionary principle has been shaped in relation to chemicals regulation and management since Carson's Silent Spring (years before the principle was confirmed as a policy-principle in German and European legislation. Furthermore, it is examined how the precautionary principle interacted with the development of the present chemicals regulatory regime, in a complex interplay within the OECD and Member Countries. The present modes of precaution in the new EU chemical legislation – REACH – are investigated with respect to the precautionary principle, and tested against two contemporary problems; brominated flame retardants and endocrine disrupting substances. Results: The analysis demonstrates the changing character of the integration of the precautionary principle. The main tendencies are from implicit to more explicit precaution and from a closed expert-orientation towards a more deliberative approach to scientific knowledge and uncertainty. The results demonstrate that the precautionary principle is manifest in both the design of the testing strategy and in policy provisions. In particular, the substitution of hazardous substances with less hazardous is important. Discussion: Despite explicit attention to the precautionary principle, is the present reformulation of the European Chemicals policy in danger of falling into loop-holes that equal problems related to the present regulation of existing chemicals? 'Precaution' has been reduced virtually to an abstract concept that is more or less devoid of practical meaning in the regulatory process. Conclusions: It is concluded that the role of the precautionary principle in chemicals regulation will require continued scrutiny in the future shaping of the REACH strategy. Perspectives: Continued development of robust and precaution-based chemicals regulation will have to involve both new data-generation strategies and new forms of political decision-making, with special attention given to transparency and deliberative policymaking.     

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用王飞越（北京大学城市与环境学系，北京１００８７１）陈雁飞（武汉大学环境科学系）最近几十年来，有机物结构──活性定量关系研究（ＱＳＡＲ，ＱｕａｎｔｉｔａｔｉｖｅＳｔｒｕｃｔｕｒｅ－Ａｃｔｉｖ...     

Recommendations on chemicals management policy and legislation in the framework of the Egyptian–German twinning project on hazardous substances and waste management

The sustainable management of chemicals and their associated wastes—especially legacy stockpiles—is always challenging. Developing countries face particular difficulties as they often have insufficient treatment and disposal capacity, have limited resources and many lack an appropriate and effective regulatory framework. This paper describes the objectives and the approach of the Egyptian–German Twinning Project under the European Neighbourhood Policy to improve the strategy of managing hazardous substances in the Egyptian Environmental Affairs Agency (EEAA) between November 2008 and May 2011. It also provides an introduction to the Republic of Egypt’s legal and administrative system regarding chemical controls. Subsequently, options for a new chemical management strategy consistent with the recommendations of the United Nations Chemicals Conventions are proposed. The Egyptian legal and administrative system is discussed in relation to the United Nations’ recommendations and current European Union legislation for the sound management of chemicals. We also discuss a strategy for the EEAA to use the existing Egyptian legal system to implement the United Nations’ Globally Harmonized System of Classification and Labelling of Chemicals, the Stockholm Convention and other proposed regulatory frameworks. The analysis, the results, and the recommendations presented may be useful for other developing countries in a comparable position to Egypt aspiring to update their legislation and administration to the international standards of sound management of chemicals.     

Quality Science in the Courtroom: U.S. EPA Data Quality and Peer Review Policies and Procedures Compared to the Daubert Factors

Protection of the environment is critically dependent on the quality of data used in decision making. Whether the decisions are part of the scientific process or relate to application of the laws governing people and their living conditions, good quality data are required/needed by two disciplines with distinct differences. This paper examines some differences between science and the law, provides a brief history of science in law, discusses the effects of law on science, compares United States Environmental Protection Agency (U.S. EPA) guidance and U.S. Supreme Court credible science criteria. This paper further speculates on the future use of science data by the courts.     

Sampling frequency guidance for ambient air toxics monitoring

The U.S. Environmental Protection Agency (EPA) is in the process of designing a national network to monitor hazardous air pollutants (HAPs), also known as air toxics. The purposes of the expanded monitoring are to (1) characterize ambient concentrations in representative areas; (2) provide data to support and evaluate dispersion and receptor models; and (3) establish trends and evaluate the effectiveness of HAP emission reduction strategies. Existing air toxics data, in the form of an archive compiled by EPA's Office of Air Quality Planning and Standards (OAQPS), are used in this paper to examine the relationship between estimated annual average (AA) HAP concentrations and their associated variability. The goal is to assess the accuracy, or bias and precision, with which the AA can be estimated as a function of ambient concentration levels and sampling frequency. The results suggest that, for several air toxics, a sampling schedule of 1 in 3 days (1:3) or 1:6 days maybe appropriate for meeting some of the general objectives of the national network, with the more intense sampling rate being recommended for areas expected to exhibit relatively high ambient levels.     

Revisiting old lessons from classic literature on persistent global pollutants: This article belongs to Ambio’s 50th Anniversary Collection. Theme: Environmental contaminants

Looking back 50 years at classic literature was a reminder of inspiring discoveries and clever theories that were formative to the field of environmental chemistry, but also of the irreparable costs that persistent global pollutants have had on ecosystems and human society. In my view, these three papers have greatly impacted contemporary science and influenced development of policies that have limited the spread of hazardous contaminants. At the same time, a sobering reality is that reversing decades of past pollution has proven impossible in our lifetime, and global trends are dire for both legacy and emerging contaminants. Lessons in these papers are clear to most environmental scientists, but I argue have not resulted in adequate investment in infrastructure or manpower to enable systematic unbiased searching for pollutants as proposed by Sören Jensen in 1972. Acknowledging that the costs of new global contaminants will be too high, we must incentivize safer chemicals and their sustainable use, increase international exchange of lists of chemicals in commerce, and coordinate international efforts in nontarget screening to identify new contaminants before they circulate the world.     

Sampling Frequency Guidance for Ambient Air Toxics Monitoring

Abstract

The U.S. Environmental Protection Agency (EPA) is in the process of designing a national network to monitor hazardous air pollutants (HAPs), also known as air toxics. The purposes of the expanded monitoring are to (1) characterize ambient concentrations in representative areas; (2) provide data to support and evaluate dispersion and receptor models; and (3) establish trends and evaluate the effectiveness of HAP emission reduction strategies. Existing air toxics data, in the form of an archive compiled by EPA’s Office of Air Quality Planning and Standards (OAQPS), are used in this paper to examine the relationship between estimated annual average (AA) HAP concentrations and their associated variability. The goal is to assess the accuracy, or bias and precision, with which the AA can be estimated as a function of ambient concentration levels and sampling frequency. The results suggest that, for several air toxics, a sampling schedule of 1 in 3 days (1:3) or 1:6 days may be appropriate for meeting some of the general objectives of the national network, with the more intense sampling rate being recommended for areas expected to exhibit relatively high ambient levels.