An evaluation of landfill disposal of asbestos-containing waste and geothermal residues within a risk-assessment framework

 The public perception of risks related to waste disposal facilities appears to reflect general societal anxieties and fears, which may not have a reasonable basis. A three-tier risk assessment study was therefore conducted to evaluate the landfill disposal of asbestos-containing waste (ACW) and geothermal residues. From the tier-1 analysis, the dominant asbestiform phase was identified as chrysotile, that is tightly bound in the matrix of calcite, while arsenic, cadmium, chromium, and lead were identified as the chemicals of potential concern associated with geothermal residues. From the tier-2 analysis, none of the possible exposure pathways associated with the landfill disposal of ACW was found to be potentially significant. On the other hand, there were potentially significant pathways associated with landfill disposal of geothermal residues because of the considerable potential pollution impact of leachate on soil and groundwater quality. From the tier-3 analysis, the health risk associated with landfill disposal of geothermal residues was found to be time-dependent, since the contributions to risk from water-dependent and water-independent pathways occur at different times, as indicated by RESRAD–Chem simulations. Component pathway analyses were performed to identify critical exposure pathways. The results from model sensitivity analysis have identified the input parameters that have the most influence on the time of peak risk, and the cancer risk associated with water-dependent and water-independent pathways. Received: July 9, 2002 / Accepted: October 17, 2002     

Screening tests for hazard classification of complex waste materials – Selection of methods

In this study we describe the development of an alternative methodology for hazard characterization of waste materials. Such an alternative methodology for hazard assessment of complex waste materials is urgently needed, because the lack of a validated instrument leads to arbitrary hazard classification of such complex waste materials. False classification can lead to human and environmental health risks and also has important financial consequences for the waste owner. The Hazardous Waste Directive (HWD) describes the methodology for hazard classification of waste materials. For mirror entries the HWD classification is based upon the hazardous properties (H1–15) of the waste which can be assessed from the hazardous properties of individual identified waste compounds or – if not all compounds are identified – from test results of hazard assessment tests performed on the waste material itself. For the latter the HWD recommends toxicity tests that were initially designed for risk assessment of chemicals in consumer products (pharmaceuticals, cosmetics, biocides, food, etc.). These tests (often using mammals) are not designed nor suitable for the hazard characterization of waste materials. With the present study we want to contribute to the development of an alternative and transparent test strategy for hazard assessment of complex wastes that is in line with the HWD principles for waste classification. It is necessary to cope with this important shortcoming in hazardous waste classification and to demonstrate that alternative methods are available that can be used for hazard assessment of waste materials. Next, by describing the pros and cons of the available methods, and by identifying the needs for additional or further development of test methods, we hope to stimulate research efforts and development in this direction. In this paper we describe promising techniques and argument on the test selection for the pilot study that we have performed on different types of waste materials. Test results are presented in a second paper.As the application of many of the proposed test methods is new in the field of waste management, the principles of the tests are described. The selected tests tackle important hazardous properties but refinement of the test battery is needed to fulfil the a priori conditions.     

Management of hazardous waste in Thailand: present situation and future prospects

 This paper deals with the present scenario of hazardous waste management practices in Thailand, and gives some insights into future prospects. Industrialization in Thailand has systematically increased the generation of hazardous waste. The total hazardous waste generated in 2001 was 1.65 million tons. It is estimated that over 300 million kg/year of hazardous waste is generated from nonindustrial, community sources (e.g., batteries, fluorescent lamps, cleansing chemicals, pesticides). No special facilities are available for handling these wastes. There are neither well-established systems for separation, storage, collection, and transportation, nor the effective enforcement of regulations related to hazardous wastes management generated from industrial or nonindustrial sectors. Therefore, because of a lack of treatment and disposal facilities, these wastes find their way into municipal wastewaters, public landfills, nearby dump sites, or waterways, raising serious environmental concern. Furthermore, Thailand does not have an integrated regulatory framework regarding the monitoring and management of hazardous materials and wastes. In addition to the absence of a national definition of hazardous wastes, limited funding has caused significant impediments to the effective management of hazardous waste. Thus, current waste management practices in Thailand present significant potential hazards to humans and the environment. The challenging issues of hazardous waste management in Thailand are not only related to a scarcity of financial resources (required for treatment and disposal facilities), but also to the fact that there has been no development of appropriate technology following the principles of waste minimization and sustainable development. A holistic approach to achieving effective hazardous waste management that integrates the efforts of all sectors, government, private, and community, is needed for the betterment of human health and the environment. Received: February 26, 2001 / Accepted: October 11, 2002     

Composition and production rate of dental solid waste in Xanthi, Greece: variability among dentist groups

The objective of this work was to determine the composition and production rate of dental solid waste, produced by dental practices in the Prefecture of Xanthi, a multicultural area in Northeast Greece with a population of 102,000. For the study, 22 private dental practices and 1 public dental practice were selected of the 48 private and 5 public dental practices in operation. The 22 private dental practices included 16 owned by Christian Greek-born dentists, 3 by Moslem dentists and 3 by Christian dentists repatriated from the former Soviet Union. Differentiation on the basis of religion is directly related to the countries from which dentists received their training, e.g., Greece-European Union, Turkey and former Soviet Union. Thus, including the one public dental practice, 4 study groups were considered. Waste collection took place for 22 working days, from 20 May to 27 June 2002. This period was considered to be a representative one for a semi-rural area, such as Xanthi. Dentists were instructed to collect the total amount of waste they produced. A total of 260 kg dental solid waste was collected during the study period and was manually separated. Dental solid waste was classified in three main categories: (1) Infectious and potentially infectious waste, accounting for 94.7% by weight. (2) Non-infectious waste accounting for 2.0%. (3) Domestic-type waste, accounting for 3.3% by weight. The category of infectious waste is classified as hazardous and includes components containing metal (8.51%), components without metal (91.18%) and amalgam (0.33%). Using the weight data, the production rate of dental solid waste for the study period in the Prefecture of Xanthi was determined to be 513 g/practice/day and of infectious and potentially infectious waste 486 g/practice/day. The latter includes the production rate of sharps (9.8 g/practice/day), non-sharps (31.6), infectious waste without metal (443) and amalgam (1.6 g/practice/day). Since dental solid waste is currently disposed of in landfills together with the municipal solid waste, the results of the study were used to suggest an appropriate management scheme. The results were also used to compare the composition and production rates of dental solid waste produced by the 4 study groups.     

Waste reduction through variable charging programs: its sustainability and contributing factors

 In this study, we analyzed the sustainability and determinant factors of waste reduction through variable charging schemes. We drew three main conclusions from the study. (1) Waste reduction was achieved by variable charging and was sustained over an average of at least 10 years. The results regarding the sustainability of the price effect were inconclusive. (2) The main factors contributing to the combustible waste reduction achieved through variable charging were two-tier pricing and the price of waste bags. The effect of two-tier pricing programs was positive. (3) Waste paper recycling and variable charging reinforce each other to promote waste reduction. Received: September 3, 2001 / Accepted: January 13, 2002     

Current status and future focus of hazardous waste management in China

 Rapid social and economic development in China has caused the amount of hazardous wastes being generated to increase drastically. The necessary regulations and systems regarding the management of hazardous wastes are currently still not in place. Based on an analysis of the characteristics of hazardous waste pollution and pollution trends in China, this paper reports on China's current status regarding hazardous waste management, and introduces the main difficulties to be faced. The principles and objectives, and the action plan for hazardous waste pollution control in China are also explained in detail. These principles and objectives have been stipulated in the Technological Policies on Hazardous Waste Pollution Control, which is issued by China State EPA, State ETC, and the Science and Technology Ministry. Received: April 30, 2002 / Accepted: October 17, 2002     

Estimating construction and demolition debris generation using a materials flow analysis approach

The magnitude and composition of a region’s construction and demolition (C&D) debris should be understood when developing rules, policies and strategies for managing this segment of the solid waste stream. In the US, several national estimates have been conducted using a weight-per-construction-area approximation; national estimates using alternative procedures such as those used for other segments of the solid waste stream have not been reported for C&D debris. This paper presents an evaluation of a materials flow analysis (MFA) approach for estimating C&D debris generation and composition for a large region (the US). The consumption of construction materials in the US and typical waste factors used for construction materials purchasing were used to estimate the mass of solid waste generated as a result of construction activities. Debris from demolition activities was predicted from various historical construction materials consumption data and estimates of average service lives of the materials. The MFA approach estimated that approximately 610–780 × 10⁶ Mg of C&D debris was generated in 2002. This predicted mass exceeds previous estimates using other C&D debris predictive methodologies and reflects the large waste stream that exists.     

Hospital waste management and toxicity evaluation: a case study

Hospital waste management is an imperative environmental and public safety issue, due to the waste's infectious and hazardous character. This paper examines the existing waste strategy of a typical hospital in Greece with a bed capacity of 400-600. The segregation, collection, packaging, storage, transportation and disposal of waste were monitored and the observed problematic areas documented. The concentrations of BOD, COD and heavy metals were measured in the wastewater the hospital generated. The wastewater's toxicity was also investigated. During the study, omissions and negligence were observed at every stage of the waste management system, particularly with regard to the treatment of infectious waste. Inappropriate collection and transportation procedures for infectious waste, which jeopardized the safety of staff and patients, were recorded. However, inappropriate segregation practices were the dominant problem, which led to increased quantities of generated infectious waste and hence higher costs for their disposal. Infectious waste production was estimated using two different methods: one by weighing the incinerated waste (880 kg day(-1)) and the other by estimating the number of waste bags produced each day (650 kg day(-1)). Furthermore, measurements of the EC(50) parameter in wastewater samples revealed an increased toxicity in all samples. In addition, hazardous organic compounds were detected in wastewater samples using a gas chromatograph/mass spectrograph. Proposals recommending the application of a comprehensive hospital waste management system are presented that will ensure that any potential risks hospital wastes pose to public health and to the environment are minimized.     

Improved quartz furnace method for chlorine and sulfur determination in municipal solid waste

 A method of determining the chlorine (Cl) and sulfur (S) in municipal solid waste (MSW) was studied. The quartz furnace method was improved in two ways: recovery from ash by hot extraction with dilute nitric acid, and avoidance of the volatilization of alkali (earth) metal chlorides by setting the sample combustion temperature at 600°C. In a comparison with the bomb method, using nine sets of kitchen garbage and waste plastics, the bomb method yielded a 15%–25% lower value than the improved quartz furnace method. Combustion in the bomb was frequently incomplete, resulting in recovery losses of Cl and S. The average kitchen garbage involved 5.2 mg Cl/g, of which at least 24.1% would be converted to HCl. Plastics contained 23 mg Cl/g generating 88.1% HCl on average. In the same way, kitchen garbage contained 3.0 mg S/g, generating 52.3% SO _x , whereas plastics contained 1.1 mg S/g with 55.1% SO _x formation. Received: March 20, 2002 / Accepted: October 13, 2002     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.     

Management of immunization solid wastes in Kano State, Nigeria

Inadequate management of waste generated from injection activities can have a negative impact on the community and environment. In this paper, a report on immunization wastes management in Kano State (Nigeria) is presented. Eight local governments were selected randomly and surveyed by the author. Solid wastes generated during the Expanded Programme on Immunization were characterised using two different methods: one by weighing the waste and the other by estimating the volume. Empirical data was obtained on immunization waste generation, segregation, storage, collection, transportation, and disposal; and waste management practices were assessed. The study revealed that immunization offices were accommodated in either in local government buildings, primary health centres or community health care centres. All of the stations demonstrated a high priority for segregation of the infectious wastes. It can be deduced from the data obtained that infectious waste ranged from 67.6% to 76.7% with an average of 70.1% by weight, and 36.0% to 46.1% with an average of 40.1% by volume. Non-infectious waste generated ranged from 23.3% to 32.5% with an average of 29.9% by weight and 53.9% to 64.0% with an average of 59.9% by volume. Out of non-infectious waste (NIFW) and infectious waste (IFW), 66.3% and 62.4% by weight were combustible and 33.7% and 37.6% were non-combustible respectively. An assessment of the treatment revealed that open pit burning and burial and small scale incineration were the common methods of disposal for immunization waste, and some immunization centres employed the services of the state or local government owned solid waste disposal board for final collection and disposal of their immunization waste at government approved sites.     

Composition and production rate of solid waste from dental laboratories in Xanthi, Greece

The composition and production rate of solid waste produced by four dental laboratories were measured in the Prefecture of Xanthi (Greece) during 2002. The selected dental labs in Xanthi were expected to produce approximately 75% of the waste produced from of all seven dental laboratories in the Xanthi Prefecture. Sampling was performed during a 2-month period. Solid waste was categorized into three major categories: (a) infectious and potentially infectious waste, (b) non-infectious toxic waste and (c) household type solid waste. Dental laboratories solid waste (DLSW) was produced at a rate of 0.059 g/cap/day (or 22 g/cap/year) at the time of the study. Household type waste, infectious and potentially infectious waste and non-infectious toxic waste comprised approximately 74%, 26% and less than 0.5% of the total DLSW weight produced, respectively. DLSW was estimated to be approximately 0.007% of the amount of municipal solid waste produced in the Prefecture of Xanthi.     

Centralized incineration treatment of infectious waste for regional hospitals in Taiwan

Taiwan has a high population density. Recently, rapid advances of medical activities have caused an environmental problem in managing the wastes generated by hospitals or clinics. Government regulations, public concern and an increased commitment to a clean environment have also brought more attention to the handling problems of medical waste. A project to plan and manage the first centralized incineration plant for infectious hospital waste has been carried out in Taiwan. This paper summarizes the results of the execution of this project. It addresses the experience gained in siting a regional incinerator, its technical operation to meet local environmental regulations and the management of the regional plant. Public concern against incineration was considered to be the most important criterion to address during establishment of the incinerator, as well as good operational performance. The operational problems encountered most frequently in the regional plant with possible causes and solutions to the problems are summarized in this paper. It was also found that a delivery manifest was useful to manage the delivery of infectious waste.     

Factors affecting the concentration of bisphenol A in leachates from solid waste disposal sites and its fate in treatment processes

 The concentrations of bisphenol A (BPA) contained in landfill leachates from solid waste disposal sites were measured. The concentrations of BPA contained in leachates from industrial waste sites were in the range below the detection limit to 2800 μg/l, while those from municipal sites were in the range 26–8400 μg/l. The leachates from ash-rich sites contained relatively lower concentrations of BPA compared with organic-rich leachates. It is suggested that BPA concentration increases with time after the completion of reclamation in the case of ash-rich sites, whereas the concentration of BPA decreases with time in the case of organic-rich sites. A 7-year survey on a site in Japan showed neither a decrease nor an increase in the concentration of BPA during on-going reclamation. A leachate from a site in the Philippines contained high concentrations of BPA. A slight positive correlation was found between BPA concentrations and total organic carbon (TOC). A major portion of the BPA in leachates was found in dissolved and organic unassociated fractions, which cannot be precipitated by coagulation. More than 99.9% of the BPA contained in raw leachates was removed by a conventional series of treatment processes consisting of biological treatment, coagulation, sedimentation, sand filtration, and activated carbon adsorption. Received: May 29, 2002 / Accepted: October 17, 2002     

Pore structure and adsorption properties of carbonized material prepared from waste paper

We have already reported the adsorptivity and pore structure of activated carbon made from waste newspaper in order to use the waste paper for purposes other than paper-making stock. However, manufacturing the activated carbon may not necessarily be an advantageous method based on environmental concerns and the effective use of the resource because the reaction during the activating process is endothermic and the amount of carbon consumed is significant. Here, we examine the pore structure and adsorption properties of waste newspaper used as an adsorbent in the form of a carbonized material. Waste newspaper was carbonized for 2 h in the temperature range 400°–1000°C. The specific surface area of the carbonized material obtained, 418 m²/g, was highest for the sample carbonized at 800°C, which was equal to or greater than that of commercially available charcoal. Moreover, the iodine adsorption number of 581 mg/g was the highest and the rate of adsorption was the fastest for the sample carbonized at 800°C. However, the humidity control capability was highest for the material carbonized at 600°–700°C. It has been determined that it is advantageous to carbonize waste paper at 800°C in order to use the carbonized material as an adsorbent, while carbonization at 600°–700°C is more advantageous for use as a humidity control material. Received: June 23, 2000 / Accepted: January 17, 2001     

Wastewater remediation using coal ash

 Small-scale domestic septic tanks discharge excess nutrients such as phosphorus and nitrogen, as well as pathogens, which can degrade local water supplies. Unfortunately, traditional chemical and physical treatments are not practicable for single-home dwellings. This work reports on a potentially attractive solution to protect local water supplies by using a low-cost industrial waste, coal ash, for contaminant removal. Coal ash is produced as a consequence of electric power generation. The majority of the ash is disposed of in landfills and surface impoundments, or stored on- or off-site, producing large hills or leveling valleys. Only a small portion of the ash is ever utilized, mainly by cement industries and road construction. For example, in Canada less than 25% is used. Therefore, if useful applications can be found, an opportunity exists to make better use of this waste material. Bench-scale laboratory experiments and full-scale field tests show that coal ash has the capacity to remove phosphorus from domestic waste water. The experimental and field data demonstrate that phosphate levels and calcium levels can be correlated, although not in a simple manner. In addition, the ash in packed beds removed total suspended solid (TSS), biological oxygen demand (BOD), ammonia nitrogen (NH₃—N), total Kjeldahl nitrogen (TKN), and E. coli. The removal of E. coli was close 100% in the cases studied. Received: May 20, 2002 / Accepted: October 5, 2002     

A system dynamics approach for hospital waste management

Healthcare services provided by hospitals may generate some infectious wastes. Although a large percentage of hospital waste is classified as general waste, which has similar nature as that of municipal solid waste and, therefore, could be disposed in municipal landfills, a small portion of infectious waste has to be managed in the proper manner in order to minimize risk to public health. Many factors involved in the hospital waste management system often link to one another, which require a comprehensive analysis to determine the role of each factor in the system. In this paper, we present a hospital waste management model based on system dynamics to determine the interaction among factors in the system using a software package, Stella. A case study of the City of Jakarta, Indonesia is selected. The hospital waste generation is affected by various factors including the number of beds in the hospitals and the NIMBY (not in my back yard) syndrome. To minimize the risk to public health, we found that waste segregation, as well as infectious waste treatment prior to disposal, has to be conducted properly by the hospital management, especially when scavenging takes place in landfill sites in developing countries.     

Porous structure of activated carbon prepared from waste newspaper

In an earlier report, we presented a method for preparing activated carbon from waste newspaper as a way to recycle used paper for a purpose other than producing raw material for paper-making. In this article, we consider the porous structure of the activated carbon that affects its adsorption properties for various substances. The specific surface area of activated carbon prepared from waste newspaper was 838 m²/g, the micropore volume was 0.368 ml/g, and the mesopore volume was 0.138 ml/g, which is about the same as commercially available activated carbon. The activated carbon prepared from waste newspaper usually has a high content of ash, which makes little contribution to the adsorption properties. In particular, as compared with reagent-activated carbon, the quantities of mesopores with a pore radius of 3–25 nm and macropores with a pore radius of 25–250 nm were 8 and 14 times larger, respectively. Activated carbon prepared from waste newspaper has a well-developed porous structure, particularly in the mesopore and macropore ranges. Received: July 12, 1999 / Accepted: March 8, 2000