Evaluation of the anthropogenic influx of metal and metalloid contaminants into the Moulay Bousselham lagoon, Morocco, using chemometric methods coupled to geographical information systems

Superficial and cored sediment samples from the Moulay Bousselham lagoon and sub-watershed were analyzed for Al, Fe, Cu, Zn, Pb, Mn, Ni, Cr, As, Hg, and Cd. The temporal and spatial distributions of the main contamination sources of heavy metals were identified and described using chemometric and geographic information system (GIS) methods. Sediments from coastal lagoons near urban and agricultural areas are commonly contaminated with heavy metals, and the concentrations found in surface sediments are significantly higher than those from 50–100 years ago. The concentrations of these elements decrease sharply with depth in the sediment column, and the elements are preferentially enriched in the <2-μm-sized fraction of the sediment. The zones of enhanced risk of heavy metals were detected by means of GIS-based geostatistical modeling. According to sediment pollution indices and statistical analysis, heavy metals (Pb, Cu, Ni, Zn, Cr, and Hg) that pose a risk have become largely enriched in the lagoon sediments during the recent period of agricultural intensification.     

The sorption of heavy metal species by sediments in soakaways receiving urban road runoff

Infiltration facilities are designed for both the retention of non-point pollutants and the replenishment of groundwater in urban areas. In this study, sorption tests were conducted to evaluate the speciation of heavy metals and their behaviour in infiltration facilities receiving urban road runoff containing high DOC concentrations and stable heavy metal organic complexes. Road dust and three soakaway sediments were collected from heavy traffic areas and a residential area with an infiltration-type sewerage system in Tokyo, Japan. Sequential multiple batch tests were conducted by adding prepared road dust leachate (artificial road runoff) or deionised water to soakaway sediment to obtain soakaway sediment leachate (artificial percolating water from soakaway sediment), which mimicked the sorption by sediments in soakaways receiving urban road runoff. Heavy metal speciation was assessed by means of a combination of anion-exchange resin measurements and MINTEQA2 model calculations, and further validated by chelating resin measurements. In road dust leachates and soakaway sediment leachates, Cu predominantly existed as organic complexes and carbonates, whereas most Mn, Zn and Cd were found to exist in the form of free ions and carbonate complexes. Stable organic complexes of Cu in road dust leachates were strongly adsorbed by soakaway sediments despite the limited adsorption of DOC. On the other hand, desorption of free Mn, Zn and Cd ions from the sediment receiving road dust leachates was observed, indicating that heavy metals such as Mn, Zn and Cd may ultimately reach groundwater as free ions.     

Characterization of Naturally-occurring and Anthropogenic PAHs in Urban Sediments-Wycoff/Eagle Harbor Superfund Site

Polycyclic aromatic hydrocarbons (PAH) are ubiquitous constituents in urban sedimentary environments. The accurate characterization of their source(s) in sediments influences decisions regarding the liability for clean-up and remedial options. In this study, an extensive PAH dataset that included 50 non-alkylated (parent) and alkylated PAH groups and isomers was acquired using a modified EPA Method 8270 for the study of 5 cm intervals from 10 sediment cores (28-78 cm) obtained from the Eagle Harbor Superfund Site on Bainbridge Island, Washington. Conventional hydrocarbon "fingerprinting" and the PAH profiles in the Pb 210 age-dated cores revealed three primary PAH sources to the sediments over the past 220 years, namely (1) naturally occurring background; (2) urban runoff, and (3) creosote, the latter resulting from prior operations at the former Wyckoff wood-processing facility located on the Harbor. Naturally occurring background PAH in the pre-industrial (<1900) sediments were dominated by perylene, 1,7-dimethylphenan-threne (derived from the oxidation of abietic acid resins), and pyrogenic PAH most likely derived from historic forest fires. The concentration of PAH total in these pre-industrial sediments was consistently less than 1 mg/kg (dry). Urban runoff in the post-industrial (>1930) sediments was dominated by low but consistent concentrations (10-20 mg/kg dry) of pyrogenic PAM derived primarily from the combustion of fossil fuel(s). The creosote-impacted sediments in the post-industrialized sediments contained high concentrations (1000-140,000 mg/kg dry) of pyrogenic PAH associated with distilled, coal-derived liquids.     

Persistent toxic substances in remote lake and coastal sediments from Svalbard, Norwegian Arctic: Levels, sources and fluxes

Surface sediments from remote lakes and coastal areas from Ny-Ålesund, Svalbard, Norwegian Arctic were analyzed for polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). Relatively high levels of PAHs were encountered from several lakes from Ny-Ålesund, which were within the range of levels reported for European high mountain lakes and some urban/industrialized areas in the world, pointing to the role of remote Arctic lakes as potential reservoir of semi-volatile organic compounds. Specific patterns of PBDEs were observed, showing higher concentrations of lower brominated compounds such as BDE-7, 17 and 28. Estimated surface sediment fluxes of PAHs in Ny-Ålesund remote lakes were similar to those observed for some European high mountain lakes. The current PAH levels in sediments from three lakes exceeded Canadian sediment quality guidelines, suggesting the presence of possible risks for aquatic organisms and the need for further studies.     

Composition and distribution of polycyclic aromatic hydrocarbons in the surface sediments from the Susquehanna River

Polycyclic aromatic hydrocarbon (PAH) concentrations in 34 surface sediments along the Susquehanna River were investigated in 2000. The total concentrations of PAHs in the surface sediments of Lake Clarke, Lake Aldred, the upper Conowingo Reservoir, and the lower Conowingo Reservoir were 3.3+/-1.5 microg g-1 (n=9), 1.6+/-1.3 microg g-1 (n=4), 9.8+/-5.5 microg g-1 (n=7), and 4.0+/-1.2 microg g-1 (n=14), respectively. These represent the first comprehensive measurement of PAHs in Susquehanna River surface sediments. Overall, total PAH concentrations were relatively lower in Lake Aldred, which is more shallow and sloped, and significantly higher in the upper Conowingo Reservoir. The sediment PAH levels were related to river flow rates, which are indirectly correlated with the particle size of the surface sediments. Total PAH levels in all the studied sites were below the effects range median (ERM) of 44.8 microg g-1 with 38% (13 of the 34 sampling sites) exceeding the effects range low (ERL) of 4.02 microg g-1. Principal component analysis indicated that variations in the PAH compound patterns of each reservoir decreased from upstream to downstream, indicating that the surface sediments were mixed along the Susquehanna River. The PAH patterns in the lower Conowingo Reservoir sediments were a combination of those upstream sources. Source analysis using isomer ratios as indicators suggested that PAHs in the Susquehanna River surface sediment are derived from the combustion of fossil fuels such as coal and gasoline with coal as the major source of contaminants.     

Spatial variability of sediment ecotoxicity in a large storm water detention basin

Detention basins are valuable facilities for urban storm water management, from both the standpoint of flood control and the trapping of pollutants. Studies performed on storm water have shown that suspended solids often constitute the main vector of pollutants (heavy metals, polycyclic aromatic hydrocarbon (PAH), etc.). In order to characterise the ecotoxicity of urban sediments from storm water detention basins, the sediments accumulated over a 6-year period were sampled at five different points through the surface of a large detention basin localised in the east of Lyon, France. A specific ecotoxicological test battery was implemented on the solid phase (raw sediment) and the liquid phase (interstitial water of sediments). The results of the study validated the method formulated for the ecotoxicological characterization of urban sediments. They show that the ecotoxicological effect of the sediments over the basin is heterogeneous and greater in areas often flooded. They also show the relationship between, on one hand, the physical and chemical characteristics of the sediments and, on the other hand, their ecotoxicity. Lastly, they contribute to a better understanding of the dynamics of the pollution close to the bottom of detention basins, which can be useful for improving their design. The results of this research raise particularly the issue of using oil separators on the surface of detention basins.     

Variation in PAH inputs and microbial community in surface sediments of Hamilton Harbour: implications to remediation and monitoring

Variations in concentrations of polycyclic aromatic hydrocarbons (PAHs) and microbial community indicators were investigated in representative highly contaminated and less contaminated surface sediment sites of Hamilton Harbour. Inputs of PAH to the upper 3cm of sediments up to four times the average upper sediment concentrations were observed. Associated PAH fingerprint profiles indicated that the source was consistent with the PAH source to the industrial region of the harbour. Increased PAH loadings were associated with decreased bacterial populations as indicated by phospholipid fatty acid (PLFA) concentrations. However, relatively minor impacts on overall community composition were indicated. Porewater methane concentrations and isotopic data indicated a difference in the occurrence of methane oxidation between the two sites. This study confirms temporally limited transport of contaminants from highly impacted regions as a vector for contaminants within the harbour and the impact on microbial carbon cycling and bed stability.     

Loading estimates of lead, copper, cadmium, and zinc in urban runoff from specific sources

Urban stormwater runoff is being recognized as a substantial source of pollutants to receiving waters. A number of investigators have found significant levels of metals in runoff from urban areas, especially in highway runoff. As an initiatory study, this work estimates lead, copper, cadmium, and zinc loadings from various sources in a developed area utilizing information available in the literature, in conjunction with controlled experimental and sampling investigations. Specific sources examined include building siding and roofs; automobile brakes, tires, and oil leakage; and wet and dry atmospheric deposition. Important sources identified are building siding for all four metals, vehicle brake emissions for copper and tire wear for zinc. Atmospheric deposition is an important source for cadmium, copper, and lead. Loadings and source distributions depend on building and automobile density assumptions and the type of materials present in the area examined. Identified important sources are targeted for future comprehensive mechanistic studies. Improved information on the metal release and distributions from the specific sources, along with detailed characterization of watershed areas will allow refinements in the predictions.     

Spatial and temporal variations of trace metals in bottom sediments of Peter the Great Bay, the Sea of Japan

New data on trace metal distribution in bottom sediments of Peter the Great Bay (the Sea of Japan) are presented. Much higher concentrations were detected near the most likely anthropogenic sources of trace metal inputs (waste water discharges from Vladivostok and Nakhodka, and the Vladivostok coastal landfill). Sediments in these contaminated areas were up to 700 ppm in Zn, 530 ppm in Pb, 7 ppm in Cd and 3 ppm in Hg. River runoff is of minor importance as a metal source in the investigated areas. The spatial distribution of trace metals outside the areas directly influenced by sewage discharges is regulated by natural processes such as sediment sorting by grain size. Based on radiometric dating of sediment cores, increases in the trace metal content of bottom sediments near Vladivostok begun in approximately 1945.     

Pressure-assisted ozonation of PCB and PAH contaminated sediments

Sediment contamination by recalcitrant organics such as polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) is prevalent and of a great concern. Remediation efforts are hampered by the hydrophobic nature of the contaminants that limits their availability as well as by the sediment matrix that limits their exposure to treatment agents. Using contaminated sediment samples from the Passaic River, St. Louis River, Waukegan Harbor, and Wells National Estuarine Research Reserve, this research demonstrated a new ozonation technique that incorporates rapid, successive cycles of pressurization (690 kPa) and depressurization, enabling more effective treatment than conventional ozonation would. Conventional ozonation reached maximum 60% and 40% removal of PAHs from the Passaic River (40 mg kg(-1) initially) and St. Louis River sediment (520 mg kg(-1) initially), respectively, in 1h; however, removals ceased despite prolonged treatment for 2h. The pressure-assisted technique removed 96% of PAHs from both river sediments within 1h; it completely removed both PAHs (16 mg kg(-1) initially) and PCBs (5.1 mg kg(-1) initially) from the Waukegan Harbor sediment in 0.5 h. The heightened treatment is explained by soil aggregate fracturing upon pressure cycles that exposes the contaminants as well as by the confluence of hydrophobic contaminants and O(3) at the gas-liquid interface in the presence of microbubbles. The technique is expected to accelerate O(3) treatment of a wide range of organic contaminants, and it may provide treatment to dredged and stored contaminated sediment.     

Chemical and biological profiles of sediments as indicators of sources of genotoxic contamination in Hamilton Harbour. Part I: analysis of polycyclic aromatic hydrocarbons and thia-arene compounds

Bottom sediment and suspended sediment samples from Hamilton Harbour (western Lake Ontario) and from a major tributary were profiled using polycyclic aromatic hydrocarbons (PAH) and thia-arenes as source apportionment tracers. Ratios of selected PAH and ratios of monomethyl and dimethyl/ethyl dibenzothiophenes to the parent dibenzothiophenes were calculated. Thia-arene and PAH profiles of Standard Reference Material SRM 1649 (urban dust/organics), SRM 1650 (diesel), SRM 1597 (coal tar), Hamilton coal tar and a composite Hamilton air particulate sample provided source sample data. The gas chromatography-mass spectrometry (GC-MS) chromatograms of all sample extracts were dominated by homocyclic PAH but interpretation of PAH profiles with respect to source was difficult. In contrast, thia-arene analyses revealed more distinct differences in profiles of samples collected in different areas of the harbour, including the tributary. These results indicated that areas of coal tar-contaminated sediment are potential contributors to the overall contaminant burden of sediments and suspended sediments in Hamilton Harbour. These data also indicated that contaminants related to mobile combustion sources were entering the harbour via a major tributary.     

Polycyclic aromatic hydrocarbons in the surface sediments from Yellow River, China

Fourteen surface sediment samples were collected from Lanzhou Reach of Yellow River, China in July 2005. The concentrations of 16 priority polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography equipped with a mass spectrometry detector (GC-MS). Total concentrations of the PAHs ranged from 464 to 2621 ng/g dry weight. Sediment samples with the highest PAH concentrations appeared at the downstream of Lanzhou City, where there was the biggest wastewater discharge pipeline from Lanzhou Oil Refinery Factory and Lanzhou Chemical Industry Company. Municipal sewage also contributed to the PAH contamination in the sediments. A correlation existed between the sediment organic carbon content (f(oc)) and the total PAH concentrations (r(2)=0.57), suggesting that sediment organic carbon content played an important role in controlling the PAHs levels in the sediments. According to the observed molecular indices, PAHs contamination in Lanzhou Reach of Yellow River originated both from the high-temperature pyrolytic processes and from the petrogenic source, showing a mixed PAH input pattern, which was also confirmed by the results of a principal component analysis (PCA). According to the numerical effect-based sediment quality guidelines (SQGs) of the United States, the levels of PAHs at most studied sites in Lanzhou Reach of Yellow River should not exert adverse biological effects. Although at some sites (such as S10, S12, etc.) one PAH may exceed the effects range low (ERL), individual PAH did not exceed the effects range median (ERM). The results indicated that sediments in all sites should have potential biological impact, but should have no impairment.     

Consequences and implication of heavy metal spatial variations in sediments of the Keelung River drainage basin, Taiwan

A great deal of effort was enforced to reduce the pollution of the Keelung River in the past 20 years. A set of sediments covering most of the Keelung River drainage basin was analyzed for bulk sediment heavy metal concentrations, grain size content and Pb-210 dating in order to understand the spatial variations of sediment heavy metal contents as well as to evaluate the effectiveness of pollution control. The results showed that anthropogenic pollution and grain size are two of the most important factors in controlling spatial variations of metals in the Keelung River sediments. In addition, little reduction of sediment heavy metal concentrations was observed in the Keelung River drainage basin. Large spatial variations of metals and grain size were observed. High concentrations of zinc, copper, lead and cadmium were found in sediments near the main outlets of the adjacent Da-Wu-Lun Industrial Park and municipal waste drainage systems. Anthropogenic sources of heavy metal have altered the natural sediment heavy metal distributions. Positive linear relationships between aluminum, iron and fine-grained sediments showed that spatial grain size variations controlled the natural aluminum and iron concentrations in sediments. Zinc, copper, lead and cadmium contents were much higher than those measured 15 years ago. The unusually high concentrations of heavy metals, high enrichment factors and their rapid increases with time in Pb-210 dated core showed that the efforts in heavy metal reduction were futile. A proper regulation to prevent further heavy metals from entering into the river is urgently needed.     

Heavy metal pollution in sediments of the Pasvik River drainage

The purpose of this paper is to study the regional impacts of heavy metals (Ni, Cu, Co, Zn, Cd, Pb, Hg) on the watershed of the Pasvik River. On the basis of sediment investigations at 27 stations of the watershed, background concentrations of the heavy metals, vertical distribution of heavy metals in sediments, heavy metal concentrations in surface sediments, contamination degree, and risk index were determined. The atmospheric emissions of Ni, Cu, Co, Zn, Cd and Hg from the smelters and waste waters from tailing dams and mines of the Pechenganickel Company are likely to be the main sources of increasing concentrations observed in recent sediments of the lower river reaches. Lead showed a different pattern from the other heavy metals--increasing Pb concentrations in the upper sediment layers towards the Norwegian side.     

Characterization of Naturally-occurring and Anthropogenic PAHs in Urban Sediments—Wycoff/Eagle Harbor Superfund Site

Polycyclic aromatic hydrocarbons (PAH) are ubiquitous constituents in urban sedimentary environments. The accurate characterization of their source(s) in sediments influences decisions regarding the liability for clean-up and remedial options. In this study, an extensive PAH dataset that included 50 non-alkylated (parent) and alkylated PAH groups and isomers was acquired using a modified EPA Method 8270 for the study of 5 cm intervals from 10 sediment cores (28–78 cm) obtained from the Eagle Harbor Superfund Site on Bainbridge Island, Washington. Conventional hydrocarbon “fingerprinting” and the PAH profiles in the Pb²¹⁰ age-dated cores revealed three primary PAH sources to the sediments over the past 220 years, namely (1) naturally occurring background; (2) urban runoff, and (3) creosote, the latter resulting from prior operations at the former Wyckoff wood-processing facility located on the Harbor. Naturally occurring background PAH in the pre-industrial (<1900) sediments were dominated by perylene, 1,7-dimethylphenanthrene (derived from the oxidation of abietic acid resins), and pyrogenic PAH most likely derived from historic forest fires. The concentration of PAH_total in these pre-industrial sediments was consistently less than 1 mg/kg (dry). Urban runoff in the post-industrial (>1930) sediments was dominated by low but consistent concentrations (10–20 mg/kg dry) of pyrogenic PAH derived primarily from the combustion of fossil fuel(s). The creosote-impacted sediments in the post-industrialized sediments contained high concentrations (1000–140,000 mg/kg dry) of pyrogenic PAH associated with distilled, coal-derived liquids.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in River Po sediments

The River Po is the main Italian river draining one of the most populated and industrialised regions in Italy. As part of a monitoring project to assess environmental quality in the River Po, we measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in bottom sediments collected along the whole course of the river, from the spring to the delta, downstream from the confluence of its main tributaries. The aim was to investigate the level of contamination in the main Italian river and the contribution of contaminant loads from the subbasins. Composite sediment samples were collected in summer and winter surveys in low-flow water conditions and analysed by HRGC-HRMS for PCDD and PCDF homologue groups and for the 2,3,7,8-substituted congeners. The spatial trend observed in the Po River for PCDD and PCDF concentrations varied depending on the load of contaminants received from the tributaries and the processes of sedimentation. The sum of PCDD and PCDF concentrations, and the toxic equivalent content, ranged from 121 to 814 and from 1.3 to 13 ng/kg dry weight sediment, respectively. These levels of contamination seem lower than in the sediments of rivers draining highly industrialised areas. The PCDD and PCDF homologue profiles in all the samples were very similar, suggesting a common source of this contamination in the River Po. Principal component analysis suggested that widespread sources, such as urban runoff and domestic wastewaters, are probably the main cause of these levels of PCDDs and PCDFs.     

Polycyclic aromatic hydrocarbons in suspended particulate matter and sediments from the Pearl River Estuary and adjacent coastal areas, China

The spatial distribution, composition, and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and suspended particulate matter (SPM) from the Pearl River Estuary and adjacent coastal areas were examined. Total PAH concentrations varied from 189 to 637 ng/g in sediments and 422 to 1,850 ng/g in SPM. PAHs were dominated by 5,6-ring compounds in sediments and by 2,3-ring compounds in SPM samples. Assessment of PAH sources suggested that biomass and coal combustion is the major PAH source to the outer part of the estuary sediments and that petroleum combustion is the major PAH source to the inner part of estuary sediments. As for SPM samples, PAH isomer pair ratios indicated multiple (petroleum, petroleum combustion, and biomass and coal combustion) PAH sources, and significant temporal variations could exist for the sources of water column PAHs in the study area. The distribution of perylene in SPM samples indicated that the river was the dominant source of perylene in SPM and that perylene could be taken as an index to assess the contribution of river inflow to the total PAHs in SPM samples. The high concentration of perylene in the sediment was indicative of an in situ biogenic origin.     

A GIS-based multimedia watershed model: development and application

A multimedia model was developed using publicly available geographical information system (GIS) data, chemical release information and local monitoring networks to assess the fate of trichloroethene (TCE) within the Passaic River Watershed. Seven environmental media, air, water, sediment, surface soil, terrestrial vegetation, root zone soil and vadose zone soil, were modeled in this study along with their sub-compartments. The Passaic River Watershed is described using the NJDEP geographical information system (GIS) resources, the United States Geological Survey (USGS) and the United States Soil Conservation Services (US SCS) soil data. The introduction of spatial resolution to a multimedia, unsteady state model is performed in this work, and represents an important step in expanding the use of equilibrium models to provide far reaching information on the fate of toxic contaminants within a given environmental unit. The spatial representation of cross-boundary fluxes was successfully demonstrated with the use of sub-watershed as an environmental unit and the direct assessment of TCE for each of the 11 sub-watersheds that make up the Passaic River Basin in northern New Jersey. Important data gaps identified during the development of this model include the lack of comprehensive monitoring data on organic contaminants, and non-uniformity among available physical environmental data from different government agencies.     

Occurrence,compositional distribution,and toxicity assessment of pyrethroid insecticides in sediments from the fluvial systems of Chaohu Lake,Eastern China

Surface sediment-associated synthetic pyrethroid insecticides (SPs) are known to pose high risks to the benthic organisms in Chaohu Lake, a shallow lake of Eastern China. However, the pollution status of the lake’s tributaries and estuaries is still unknown. The present study was conducted to investigate the occurrence, compositional distribution, and toxicity of 12 currently used SPs in the surface sediments from four important tributaries, as well as in the sediment cores at their estuaries, using GC-MS for quantification. All SPs selected were detectable, with cypermethrin, es/fenvalerate, and permethrin dominant in both surface and core sediments, suggesting that these compounds were extensively applied. Urban samples contained the highest summed concentrations of the 12 SPs analyzed (Σ₁₂SP) in both surface and core sediments compared with rural samples, suggesting that urban areas near aquatic environments posed high risks for SPs. The mean concentration of Σ₁₂SP in surface sediments of each river was generally higher than that found in core sediments from its corresponding estuary, perhaps implying recent increases in SP usage. Surface sediments were significantly dominated by cypermethrin and permethrin, whereas core sediments were dominated by permethrin and es/fenvalerate. The compositional distributions demonstrated a spatial variation for surface sediments because urban sediments generally contained greater percentages of permethrin and cypermethrin, but rural sediments had significant levels of es/fenvalerate and cypermethrin. In all sediment cores, the percentage of permethrin gradually increased, whereas es/fenvalerate tended to decrease, from the bottom sediments to the top, indicating that the former represented fresh input, whereas the latter represented historical residue. Most urban samples would be expected to be highly toxic to benthic organisms due to the residue of SPs based on a calculation of toxic units (TUs) using toxicity data of the amphipod Hyalella azteca. However, low TU values were found for the samples from rural areas. These results indicate that the bottom sediments were exposed to high risk largely by the residual SPs from urban areas. The summed TUs were mostly attributable to cypermethrin, followed by λ-cyhalothrin and es/fenvalerate. Despite permethrin contributing ～28.7 % of the Σ₁₂SP concentration, it only represented 6.34 % of the summed TUs. Therefore, our results suggest that high levels of urbanization can increase the accumulation of SPs in aquatic environments.     

Arsenic and mercury concentrations in major landscape components of an intensively cultivated watershed

To provide an understanding of arsenic (As) and mercury (Hg) concentrations in soil, sediment, water, and fish tissues, samples were collected from a Mississippi River alluvial floodplain located in northwest Mississippi. As concentrations increased approximately an order of magnitude from water (5.12 micrograms/l) to fish tissues (36.99 micrograms/kg) and an additional two orders of magnitude in soils, lake sediments, and wetland sediments (5728, 5614, and 6746 micrograms/kg), respectively. Average Hg concentrations in water, soils, lake sediments, and fish were 2.16 micrograms/l, 55.1, 14.5 and 125 micrograms/kg, respectively. As and Hg concentrations were within published ranges for uncontaminated soil, water, and sediments. As concentrations represented a low risk. Hg concentrations were also low but showed a greater tendency to concentrate in fish tissue. The dominant mode of entry of these materials into aquatic systems is through storm-generated runoff. Since both metals accompany sediments, agricultural conservation practices such as reduced tillage, buffer riparian strips, and bordering sediment ponds or drainage wetlands will minimize watershed input to aquatic systems.