Metal contents in coastal waters of San Jorge Bay, Antofagasta, northern Chile: a base line for establishing seawater quality guidelines

We measured the concentration of 12 metals in coastal waters of seven sites of San Jorge Bay in Antofagasta (northern Chile), in order to relate the presence of metals with the different uses of San Jorge Bay coastal border, and to evaluate the quality of the bay's bodies of water according to the proposed current Chilean Quality Guide for trace elements in seawater (CONAMA 2003). The results suggest that the coastal water of San Jorge Bay has very good quality according to the proposed regulation mentioned above. However, the distribution of metals such as Cu and Pb along the bay's coast line evidences a notorious effect of the industrial activity, which would involve different behavior patterns for some trace elements in some bodies of water, suggesting that the levels indicated in the environmental guideline of the Chilean legislation do not represent pollution-free environments.     

The geographic distribution of trace elements in the environment: the REGARDS study

Research on trace elements and the effects of their ingestion on human health is often seen in scientific literature. However, little research has been done on the distribution of trace elements in the environment and their impact on health. This paper examines what characteristics among participants in the Reasons for Geographic and Racial Differences in Stroke (REGARDS) study are associated with levels of environmental exposure to arsenic, magnesium, mercury, and selenium. Demographic information from REGARDS participants was combined with trace element concentration data from the US Geochemical Survey (USGS). Each trace element was characterized as either low (magnesium and selenium) or high (arsenic and mercury) exposure. Associations between demographic characteristics and trace element concentrations were analyzed with unadjusted and adjusted logistic regression models. Individuals who reside in the Stroke Belt have lower odds of high exposure (4th quartile) to arsenic (OR 0.33, CI 0.31, 0.35) and increased exposure to mercury (OR 0.65, CI 0.62, 0.70) than those living outside of these areas, while the odds of low exposure to trace element concentrations were increased for magnesium (OR 5.48, CI 5.05, 5.95) and selenium (OR 2.37, CI 2.22, 2.54). We found an association between levels of trace elements in the environment and geographic region of residence, among other factors. Future studies are needed to further examine this association and determine whether or not these differences may be related to geographic variation in disease.     

Feasibility study prior to the certification of trace elements in urban and industrial wastewater reference materials

Reliable results for the determination of trace elements in urban and industrial wastewaters are of paramount importance for both checking the performance of sewage treatment and for detecting possible urban or industrial contamination sources. The quality control of measurements should in principle rely on external tools such as certified reference materials (CRM), which should represent, as closely as possible, the matrix of samples currently analysed, e.g., in the frame of environmental monitoring. To date, however, no CRM representatives of wastewater composition are available, which limits the possibility for control laboratories to check their QC externally. To fill this gap, the European Commission's Standards, Measurements and Testing Programme (formerly BCR) has started a European collaborative project of which the aim is to test the feasibility of preparation of wastewater reference materials and the analytical state-of-the-art to enable the certification of trace elements in such matrices. This paper presents the results of the first phase of this project, namely the feasibility study and the results of an interlaboratory trial.     

Trace Element Patterns and Seasonal Variability of Dust Precipitation in a Low Polluted City – The Example of Karlsruhe/Germany

Urban areas of different land uses can be distinguished by their specific patterns of atmospheric dust and trace element precipitation. Dusts emitted from industrial areas with fossil fuel processing, for instance, are enriched in V, Ni and Co. Cluster analysis groups sampling sites based on their specific element patterns. The resulting groups correspond to the surrounding land use: Urban sampling sites were identified showing similar patterns of dust and trace element precipitation as a reference site; dusts of other urban sites were influenced by diffuse pollution (caused by non-point and dispersed pollution sources), or by specific industrial emissions. Cluster analysis was also used to characterize the chemical dust composition. Three clusters of typical element associations were distinguished. These clusters represent the dust matrix, diffuse urban pollution and pollution due to fossil fuel processing. Dust precipitation and chemical dust composition show seasonal variations. Dust precipitation and concentrations of trace elements in the precipitated dust are negatively correlated during the annual courses. The highest concentrations of trace elements occur during winter, whereas the highest precipitations of dust were found during summer. This finding stresses that both, precipitation and concentration have to be addressed for the environmental assessment of urban dusts.     

Biogeochemical assessment of the urban area in Moscow

The biogeochemical and ecological assessment of the industrial city territory including urban soils and trees was carried out. Chemical (macroelement and microelement) composition of the city soils, morphological and biochemical properties of the linden leaves, possible impact of de-icing salts on soil and tree state, the correlation between the content of trace elements, and the S-containing plant compounds (phytochelatins) were included in the assessment. It was found that concentrations of trace elements in the soils near road with intensive traffic are changed from the soils, located at a distance of 40–50 m from the road. They have higher concentrations of As, Fe, Mn, Se, and Sr and lower concentration of Zn. The linden leaves from the roadside were characterized by the increase in As, Cu, Fe, Zn, and Cr and sharp decrease in the Mn and Sr concentrations. The analysis of soil water extracts showed a slight decrease of pH and low content of Ca, Mg, K, and Na for the distant sites. The phytochelatin test of linden leaves was weakly effective as well as asymmetry degree study of leaf lamina. The main differences were observed in the damage symptoms of leaves (chlorosis and necrosis) and the content of pigments (chlorophyll and carotenoids). The biochemical and ecological assessment of soils and trees showed relatively satisfactory ecological state of the investigated area in Moscow. The data obtained shows the weak local impact of the application of de-icing salts and automobile emissions.     

Assessment of growth and stemwood quality of Scots pine on territory influenced by alkaline industrial dust

Long-term influence of alkaline dust (pH 12.3–12.7) pollution emitted over 40 years from a cement plant in Estonia was the reason of alkalisation (pH 6.7–7.9) and high concentrations of K, Ca and Mg in the soil of affected territories. Although dust emission has diminished during the last 10 years, the disbalances in nutrition substrate and their influence on the growth of trees are notable up to now. The study of morphological and physical properties of 70–80-year-old Scots pine (Pinus sylvestris L.) crown, stems and stemwood from three different air pollution zones showed serious deviations in comparison with a relatively healthy forest in an unpolluted area. The specimens from polluted trees, if compared to reference site, showed significantly smaller height growth, radial increment and width of annual rings of sapwood. In heartwood wider annual rings were found in polluted areas. In the period of heartwood formation the dust pollution level emitted from the plant was relatively modest and cement dust, which contains elements necessary for mineral nutrition of trees, may have acted as fertiliser. The moisture content in sapwood and heartwood, especially in the upper layers of stems, was lower in the polluted area than in reference site trees. Regression analysis revealed a strong dependence between latewood percentage and sapwood or heartwood in stems of Scots pine in all sample plots.     

Benthic foraminiferal response to trace element pollution—the case study of the Gulf of Milazzo, NE Sicily (Central Mediterranean Sea)

The response of benthic foraminiferal assemblages to trace element pollution in the marine sediments of the Gulf of Milazzo (north-eastern Sicily) was investigated. Since the 1960s, this coastal area has been a preferred site for the development of two small marinas and a commercial harbour as well as for heavy industry. Forty samples collected in the uppermost 3–4 cm of an undisturbed layer of sediment in the littoral environment were used for this benthic foraminiferal analysis. The enrichment factors (EFs) of selected trace elements (As, Co, Cr, Cu, Mn, Ni, Pb and Zn) were also calculated. Changes both in benthic foraminiferal assemblages and in some trace elements concentrations have provided evidence that the gulf’s littoral zone can be subdivided into three sectors characterised by environmental changes in the marine ecosystem. In the sector unpolluted, close to the Milazzo Cape, foraminiferal assemblages exhibit high values of species richness and foraminiferal density while trace element concentrations and their EFs are very low. Here, the highest densities of Miliolids and epiphytic species are present. On the contrary, in the sector polluted, from the marinas to the crude oil refinery, foraminiferal density and species diversity are low, and assemblages are dominated, albeit with very low densities, by species that tolerate stressed environmental conditions, such as LOFAs, agglutinants and Ammonia spp. Here, the highest trace elements concentrations of Pb, Zn and Cu and related EFs were detected. Eastwards, in the sector moderately polluted, foraminiferal populations are quite poor. They are characterised by low values of species richness and foraminiferal densities, nevertheless trace element concentrations become lower than in the other sectors and their EFs are often below 1. Deformed foraminifera, with percentages up to 7.14 %, were found in all three of the sectors. Differences in benthic foraminiferal assemblages, coupled with results from statistical analysis, indicate that anthropogenic trace element pollution could be considered as one of the most important causes of the modifications of foraminiferal assemblages in the study area.     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

Distribution and ecotoxicological significance of trace element contamination in a ~150 yr record of sediments in Lake Chaohu, Eastern China

This paper presents the concentrations, vertical profiles and possible sources of selected major and trace elements in a sediment core covering ～150 years of sedimentation in Lake Chaohu, eastern China. Element concentrations were measured by portable X-ray Fluorescence Spectroscopy (XRF) and were used to evaluate possible environmental consequences of the recent industrialization in China. Statistical analyses identify four groups: (1) organic carbon (OC), total nitrogen (TN), Pb, Zn, and As associated with the use of chemical fertilizers and pesticides; (2) Mn, Cr, Ni and Cu from industrial and mining activities; (3) Fe, Rb, K, Co, Ti and Ca influenced by post-depositional processes and land exploitation; and (4) Zr and Sr from the soil. The vertical profiles of elements placed in the first two groups show distinct increases in concentrations above depths of 20 cm (~1978), coincident with the timing of industrialization in China, and the anthropogenic-derived fluxes are higher than the lithogenic-derived fluxes over the last three decades. With the exception of Zr and Sr, association of the measured metals with organic carbon and nitrogen suggests that organic matter may act as a carrier phase. The geoaccumulation index (I(geo)) reveals increased contamination from elements in the first two groups in recent years. Element concentrations, compared with the Effects Range-Low (ERL) and Effects Range-Median (ERM) levels set by NOAA, suggest that adverse biological effects from Ni contamination are very likely.     

Impact of Coal Power Plant Emission on the Foliar Elemental Concentrations in Plants in a Low Rainfall Tropical Region

A field study was conducted around two thermal power plants of India to quantify the changes in foliar elemental concentrations due to emission in a low rainfall tropical area. Sulphur dioxide and particulates were at high levels which may cause serious ecological effects. Emission from the power plants has altered the elemental concentrations in the leaves of evergreen and deciduous plants. The foliar total-S and SO₄ ^2–-S levels were significantly higher in all the plants growing at polluted sites. However, the organic-S content was more or less unaltered. In evergreen plants, the SO₄ ^2–-S content increased gradually from summer through winter, whereas in the deciduous plants there was a higher magnitude of increase after onset of new leaves during summer. With the increasing pollution load, foliar Ca²⁺ and K⁺ contents increased, whereas N content decreased. The reduction in N content was greater during summer in evergreen plants and during winter in deciduous plants. The plants growing closer to the power plants accumulated more trace elements (Mn, Fe, Cd, Pb and Ni) as compared to those growing at distant sites. In deciduous plants the leaf fall during winter lowered down the trace element     

Monitoring of heavy metals uptake and allocation in Pinus sylvestris organs in alkalised soil

The concentration of heavy metals in soil and in Scots pine (Pinus sylvestris) organs growing on a pH gradient from 4.0 to 7.9 of soil at different distances from a cement plant was monitored. Emission for over 40 years of alkaline dust (pH 12.3-12.6) into the atmosphere in North Estonia had resulted in alkalisation and elevated concentration of total heavy metals in upper layers of the soil (0-30 cm), which was considerable even 10 years after the dust pollution stopped. Monitoring showed that the accumulation and allocation of heavy metals varied between the stem, shoots and needles and differed from the trees in the unpolluted area, depending more on the mobility of elements and the pH than element concentrations in the alkaline soil. A strong negative correlation was found between the soil pH and Mn, Zn and Cd concentrations in different tree organs. Compared to the unpolluted area, Pb was present in relatively higher concentrations in all organs but Cr, Fe and Cu in needles and shoots. The concentrations of Mn and Cd were much lower than control in all organs of trees in alkalised soil. The height increment and density of needles on shoots were predominantly in negative correlation with the pH of soil.     

Speciation and sources of atmospheric aerosols in a highly industrialised emerging mega-city in central China

Monitoring air quality in large urban agglomerations is the key to the prevention of air pollution-related problems in emerging mega-cities. The city of Wuhan is a highly industrialised city with >9 million inhabitants in Central China. Simultaneous PM10 sampling was performed during 1 year at one urban and one industrial site. Mean PM10 daily levels (156 microg m(-3) at the urban site and 197 microg m(-3) at the industrial hotspot) exceed the US-EPA or EU annual limit values by 3-4 times. A detailed study of daily speciation showed that the mean chemical composition of PM10 presents minimal differences between peak and low PM episodes. This implies that PM10 aerosols in the study area result from local emissions, and air quality management and abatement strategies in Wuhan should thus focus on local anthropogenic sources. The levels of some elements of environmental concern are relatively high (409-615 ngPb m(-3), 66-70 ngAs m(-3), 116-227 ngMn m(-3), 10-12 ngCd m(-3)) due to industrial, but also urban emissions. Principal component analysis identified a mineral source (probably cement and steel manufacture) and smelting as the main contributors to PM10 levels at the industrial site (34%), followed by a coal fired power plant (20%) and the anthropogenic regional background (16%). At the urban site the major PM10 source is a mixed coal combustion source (31%), followed by the anthropogenic regional background (28%) and traffic (16%).     

Genotoxicity at Low Level Dose of Inspirable Urban Ambient Air Particulate in a Semiarid Regime

Samples of inspirable air particulate(inhalable + ingestable) were obtained at two urbanlocations in southern Argentina which differ in theirexposure to pollution by class B2 polynuclear aromatichydrocarbons (PAHs). Sample extracts were tested in vitro for induction of chromosomal aberrations incultured rat hepatocytes. The average induced amountof chromosomal aberrations did not vary amonggeographic locations, but significant differences wereidentified in samples near known emitting sources. Thedifferences were analyzed in the frame of a model ofthe emissions and their subsequent distribution andre-suspension from the soil and other surfaces. Theresults show that the rat hepatocyte test is sensitiveto genotoxic activity of the urban air particulate inthe low dose range of the tested fractions. Adequatemodels of human exposure to these materials shouldconsider emissions and re-suspension of pollutants bywind. The implications of these results on theformulation of policies of emission reduction, urbansoil management and the design of cancer epidemiologystudies are discussed.     

Chlorinated, brominated, and perfluorinated compounds, polycyclic aromatic hydrocarbons and trace elements in livers of sea otters from California, Washington, and Alaska (USA), and Kamchatka (Russia)

Concentrations of organochlorine pesticides (DDTs, HCHs, and chlordanes), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), polycyclic aromatic hydrocarbons (PAHs), perfluorinated compounds (PFCs), and 20 trace elements were determined in livers of 3- to 5-year old stranded sea otters collected from the coastal waters of California, Washington, and Alaska (USA) and from Kamchatka (Russia). Concentrations of organochlorine pesticides, PCBs, and PBDEs were high in sea otters collected from the California coast. Concentrations of DDTs were 10-fold higher in California sea otters than in otters from other locations; PCB concentrations were 5-fold higher, and PBDE concentrations were 2-fold higher, in California sea otters than in otters from other locations. Concentrations of PAHs were higher in sea otters from Prince William Sound than in sea otters from other locations. Concentrations of several trace elements were elevated in sea otters collected from California and Prince William Sound. Elevated concentrations of Mn and Zn in sea otters from California and Prince William Sound were indicative of oxidative stress-related injuries in these two populations. Concentrations of all of the target compounds, including trace elements, that were analyzed in sea otters from Kamchatka were lower than those found from the US coastal locations.     

TSP, PM depositions, and trace elements in the vicinity of a cement plant and their source apportionments using chemical mass balance model in Izmir, Turkey

Total suspended particles mass concentrations (TSP) and bulk depositions of particulate matter (PM depositions) were measured around a cement plant located in the multi-impacted area to assess the affect of the plant on the ambient air in the vicinity in Izmir, Turkey. TSP samples were collected five times a month whereas PM depositions were sampled monthly at four sites between August 2003 and January 2004. The concentrations of Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, and Zn in TSP and PM depositions (except Cu) were reported. Chemical mass balance (CMB) receptor model with local source profiles was run in order to calculate the source contributions of the PM sources to the concentrations of TSP, PM depositions, and trace elements. Traffic was found to be the major contributor to TSP whereas PM depositions dominantly result from area sources including several stone quarries, concrete plants, lime kilns, and asphalt plants in the region. CMB model results indicate that the cement plant is a significant contributor to TSP, PM depositions, and trace elements, particularly Cd.     

Trace elements as tracers of environmental pollution in the canal sediments (alluvial formation of the Danube River, Serbia)

The purpose of this study was to examine the levels of trace elements and to discuss the origin and mobility of these contaminants in the canal sediments (alluvial formation of the Danube River). The most significant fractions binding all of the studied elements were oxides and silicates. The high proportion of elements in the residual fraction and the generally low contents of extractable elements reflected the background geochemical conditions. The contents of trace elements (except Hg and As) were dominantly controlled by the presence of Fe and Mn oxides as well as by the grain size and the geochemical composition of the sediment. The studied alluvial sediments were not heavily contaminated; there were only few sites where an anthropogenic influence on the concentrations of some metals (Cu, Cd, Zn, and Pb) was noticed. The results from this study show that impact of Pan?evo industrial zone on the quality of the Danube River and its contamination with trace element is minor.     

Integrated techniques to identify groundwater vulnerability to pollution in a highly industrialized terrain, Tamilnadu, India

Investigation has been made to identify groundwater vulnerability to pollution by using geoelectric and hydrochemical investigations in an important industrial town Mettur located in Tamilnadu state of India. Schlumberger vertical electric soundings were carried out in 23 locations and groundwater samples collected from bore wells in the same locations. The resistivity value with <20 Ωm up to a depth of 36 m indicate contamination of groundwater in areas influenced by sewages from industries, domestic and agricultural practices in the central and southern part of the study area. The calculated specific conductance was noted higher than EC in central and southern part of the study area with low resistivity indicating the contaminated nature of groundwater. Concentrations of Ca, Na, Mg and K along with Cl, HCO(3), SO(4) and NO(3) were higher in certain locations when compared with WHO and ISI standards. The facies concept demarcated four groups based on the nature of groundwater contamination. The trace elements Fe and Pb were higher in locations confined to industrial zones and Zn and Cu were within the prescribed limit in all the samples.     

Risk assessment of trace elements in cultured freshwater fishes from Jiangxi province,China

The levels of trace elements (As, Cd, Cr, Cu, Fe, Ni, Pb, Se, and Zn) in eight species of cultured freshwater fishes from Jiangxi province were determined by inductively coupled plasma-mass spectroscopy. All the studied trace element levels in fish muscles from Jiangxi province did not exceed Chinese national standard and European Union standard, and they were often lower than previous studies. The calculated target hazard quotient values for all the studied trace elements in fish samples were much less than 1, suggesting that the studied trace elements in fish muscles from Jiangxi province had not pose obvious health hazards to consumers. As and Cd concentrations in northern snakehead were much higher than that in other fishes, demonstrating that this fish species could be valuable as a bioindicator of As and Cd in environmental surveys. In addition, the highest concentrations of Fe, Zn, and moderate contents of other essential trace elements in crucian carp indicated that crucian carp could be a good nutrient source of essential trace elements for human health.     

严格管控类耕地非食用植物镉修复效果评价

综述了国内外在烟草,树木(杨树、柳树、桑树),纤维植物(苎麻、棉花)和蓖麻等非食用植物修复土壤镉方面的研究与应用进展,综合分析其修复能力与经济效益,得出蓖麻和苎麻的修复效果最佳.针对严格管控类耕地土壤镉修复,提出了开展非食用植物修复大田试验示范、研发环境友好型辅助措施、优化种植结构调整生态补偿机制,以及及时开展耕地土壤环境质量类别动态调整等建议.