Warning variables affecting personal protective equipment use

This paper describes two studies conducted to test selected warning variables for their influence on the use of personal protective equipment. Both of the studies were field demonstrations; one conducted in a recreational setting and the other as part of a consumer product scenario. Each of the studies involved manipulations that could be practically implemented in many warning situations. Both studies showed that cost strongly influenced the use of personal protective equipment. “Cost” was shown to include parameters of time and difficulty with obtaining the equipment. The results indicate that a small increase in cost can devastate equipment use rates. Additional factors that were shown to positively influence equipment use under at least some circumstances include: (1) the addition of “specific consequence” information, including accident frequency and severity data, to standard warning signs/labels; and (2) product labels requiring physical manipulation by the consumer for product use.     

What is most important for safety climate: The company belonging or the local working environment? – A study from the Norwegian offshore industry

Obtaining knowledge about factors affecting health, safety and environment (HSE) is of major interest to the petroleum industry, but there is currently a severe shortage of relevant studies. The aim of this study was to examine the relative influence of offshore installation (local working environment) and company belonging on employees’ opinions concerning occupational health and safety. We analyzed data from a safety climate survey answered by 4479 Norwegian offshore petroleum employees in 2005 on the dimensions “Safety prioritisation”, “Safety management and involvement”, “Safety versus production”, “Individual motivation”, “System comprehension” and “Competence” using one way analysis of variance (ANOVA), effect size and mixed model. The companies differed significantly for “Safety prioritisation”, “Safety versus production”, “Individual motivation”, “System comprehension” and “Competence”. The local offshore installation explained more of the safety climate than the company they were employed in or worked for did.     

Expert opinions, fuzzy probabilities, and warnings: toward a mathematical method for evaluating warning “read and heed” effectiveness

In many situations, and particularly in legal matters, decisions may be based on whether some possibility is judged to be “more probable than not”, as for example, whether a warning, had it been present, would “more probably than not” have prevented an injury. The probability of a warning accomplishing its purpose of preventing injury can, in principle, be computed based on probability calculus. However, this paper proposes that: (1) such computations must use “fuzzy” probability statements which as a result produce a range of weighted possibilities for the final outcome and, moreover; (2) the critical statistic for determining whether the outcome is “more probable than not” is the median rather than the mean of the possible outcomes. This paper briefly outlines the mathematics for such computations and provides several examples. The paper basically treats fuzzy probabilities as standard “random variables” restricted to the range of [0,1].For brevity, this paper only treats the multiplication of two or more fuzzy probabilities. However, this is adequate for evaluation of a two stage “read and heed”, or of longer multiple step linear sequences and is indicative of the general approach. Treatment of the additive and general case will be found in later publications.     

Fire risk management system for safe operation of large atmospheric storage tanks

This paper has been prepared by its authors to show the benefits coming from the application of the fire risk assessment methodology prepared by the “LastFire^© Project” group of experts. Now a days this methodology seems to be very effective to face the fire risk connected with large atmospheric storage tanks. It has been developed during the period 1997–2005 the HSE & operations experts from experts 16 worldwide operating oil companies. The authors, by “ad hoc” created software package, show the benefit coming from the applications of the LastFire^© methodology and how, from this, using the methodology and the supporting tad, realize a coherent fire strategy in the form of a Fire Risk Management System. Same workflow could also be extended to the issues connected with other problems related with large atmospheric tanks storing hydrocarbons, such as environmental impact by soil pollution, to create a common frame walk of assessment not can be shared with authorities as well. The proposed methodology, moving from the original project, sets as an effective “Fire Hazard Management Approach” in line with the most recent trends (even enforced by the regulations) shared at international levels, that propose the integration of risk assessment with prevention and protection measures selection based on achieved risk reduction, costs, time needed, etc.     

Risk and system integrity concepts for safety-related control systems

This paper provides an overview of the concepts of “risk” and “safety-integrity” in relation to safety-related electrical/electronic/programmable electronic systems. The paper is an abridged version of Annex A of the emerging International Electrotechnical Commission (IEC) Standard; “Functional safety of electrical/electronic/programmable electronic systems”. Although based on Annex A, the authors have deviated in a few instances, from the strict wording of Annex A in order to more properly represent their own views. Where this occurs, a note in the text has been added to alert the reader of the deviation. The concepts of risk (including tolerable risk; safety integrity; safety-related system; System and Software Integrity Levels) are discussed.     

The effect of habit as a behavioural response in risk reduction programmes

A company's decision to implement a risk reduction programme must take account of employees' behavioural responses to the target risk. Hazard reporting by train drivers is examined in semi-structured interviews and a questionnaire study. It is suggested that the behavioural response of drivers, in terms of writing a report, depends on how the hazard is perceived. The response to “trivial” and “routine” hazards is habitual non-reporting, being characterized by a lack of risk evaluation. However, hazards that are evaluated as posing a significant risk are reported. Possible ways of breaking habitual responses to hazards, using behavioural change programmes, are discussed, and it is argued that management commitment is essential for their success.     

A risk-estimation methodological framework using quantitative assessment techniques and real accidents’ data: Application in an aluminum extrusion industry

The risk estimation presumably is the most crucial part of the entire procedure of assessing hazards/unsafe situations in the work, and especially in the industries’ and constructions’ worksites, where the working conditions are unstable. We can consider the risk as a quantity, which can be estimated and expressed by a mathematical relation, under the help of real accidents’ data. The aim of this work is quadruplicate: (a) the development, elaboration and explanation of two new quantitative risk-assessment techniques, (b) the improvement of specific points of other scientific works, as far as concerns quantitative risk estimation, (c) the application of these techniques on an industrial productive procedure (as a case study) and (d) the comparison of their outcome risk-estimation results. Particularly, we develop and analyze the theoretical background of the two techniques, which we call as “proportional technique” and “decision matrix technique”, and apply them on an aluminum extrusion industry's worksite, which is situated in Greece, by using real data of potential sources of hazards, recorded by safety managers, during the 5.5-year time period of 1999–2004. Comparing the results of the two quantitative risk-assessment techniques, we infer that they are compatible. Therefore, the most important hazard source in the aluminum industry is the “squeezing and hits by dropping objects (transported by derricks)”, and imposes that immediate suppressive measures must be taken place to abolish the danger source.     

“Slippery” work surfaces: Towards a performance definition and quantitative coefficient of friction criteria

There have been 50 years of research in walking/working surface slipperiness and coefficient of friction (COF) measurements. Nevertheless, numerous standards address slip/fall accidents only in terms of requiring surfaces to be qualitatively “nonslippery.” The literature useful for establishing quantitative criteria for “slippery” vs. “slip-resistant” have been summarized here. A performance definition for “slippery work surfaces” is proposed. Recommendations applicable to standards-making organizations are made, including changing terms such as “non-slip” to “slip-resistant” and defining “slippery” in terms of quantitative COF values. For persons walking unloaded on level surfaces, a COF standard of 0.5 would be reasonable. Research is recommended to determine if “slip-resistance” requirements and accident prevention could be achieved more easily be controlling the type of shoe, type of task, or amount of surface contaminant rather than controlling only the COF of the basic surface and its coating.     

Intrinsic road safety: A new approach?

In 1991 the Dutch Ministry of Transport, Public Works and Water Management concluded that its policy regarding road-safety should be sharpened in order that its goal set for road-safety in the year 2010 would be achieved (i.e. 50% reduction of dead and 40% reduction of wounded persons in comparison with 1986). This new policy is being called “Intrinsic Safety”.The important elements of this course of action are:

• - A greater degree of control of structural developments.

• - Increased action to prevent accidents rather than that which reduces the severity of the consequences of accidents.

• - Greater attention for an integral approach of traffic safety, through influencing all kinds of decision makers outside the realm of traffic safety.

• - Not viewing and treating the human aspects, the roads and the vehicles in isolation, but primarily focusing attention on the interaction between these components.

At the moment the Ministry has inaugurated some actions which will be a more specific elaboration of “Intrinsic Safety”.In this paper we will try to analyze whether this new policy is a totally new concept rather than an intensification of the old course of action. Furthermore we will discuss a few problems which may occur when the “Intrinsic Safety” approach will be elaborated in the near future. For example:

• - How do we make sure that chosen measures (e.g. decisions concerning the infrastructure) will be the most effectual ones in relation with safety?

• - Is the organisation at this moment sufficiently fit to work on an “intrinsically safe traffic system” or is it inappropriate? (e.g., presently there is an increasing tendency of decisions being made by regional departments rather than by central government)

• - Are we in the possession of sufficient knowledge concerning the interactions between the several goals of traffic policy so that actions taken in relation with one goal (e.g. reducing air pollution) will not have a negative effect on traffic safety?

     

Application of domino effect quantitative risk assessment to an extended industrial area

Escalation of primary accidental scenarios triggering a “domino effect” have caused extremely severe accidental events in the chemical and process industry. The identification of possible escalation events is required in the safety assessment of sites where relevant quantities of hazardous substances are stored or handled. In the European Union, “Seveso-II” Directive requires the assessment of on-site and off-site possible escalation scenarios in sites falling under the obligations of the Directive. In the present study, a methodology developed for the quantitative assessment of risk due to domino effect was applied to the analysis of an extended industrial area. Recently developed equipment damage probability models were applied for the identification of the final scenarios and for escalation probability assessment. The domino package of the Aripar-GIS software was used for risk recomposition. The results evidence that quantitative risk assessment of escalation hazard is of fundamental importance in order to identify critical equipment and to address prevention and protection actions.     

A theoretical and methodological framework for studying and modelling drivers’ mental representations

This article provides a synthetic overview of the research programme carried out at INRETS-LESCOT over the last 10 years, in view to studying and modelling the mental representations of car drivers. Theoretically, this research is in line with two complementary scientific traditions: Human Information Processing theories on the one hand, and theories of Operative Activity on the other. As discussed in Section 1 of the article, attention is given to the functional representations of drivers, constructed “by” and “for” the action, such as they are implemented in a driving situation, and taking into account both implicit and explicit dimensions. This aim directly impacts on the methodological approach implemented, in so far as it entails defining an “experimental continuum” ranging from naturalistic observations of the driving activity (on the open road), to setting up more controlled experimental protocols in order to permit in-depth, systematic and reproducible scientific investigations of drivers’ cognition. Section 2 of the article presents a synthetic view of these methods, while Section 3 presents several significant results obtained with them. Lastly, the final part of the article focuses on the computational formalism defined at INRETS-LESCOT (i.e. the driving schemas) designed to model driver knowledge and mental representations, and developed in a COgnitive Simulation MOdel of the DRIVEr called COSMODRIVE.     

Improving the effectiveness of warnings by increasing the appropriateness of their information content: some hypotheses about human compliance

The ways that warnings are administered vary greatly. A warning may come as a message broadcast on the radio about severe weather, as a flashing light in the cockpit of an airplane, or as an audible smoke alarm. Typically, warnings provide an auditory or visual signal to assist in the detection of an anticipated stimulus. However, warnings tend to operate in an all or none mode: either the warning is present, or it is not. Consequently, the information they provide is limited. If warnings are provided too often, their information content becomes even lower and frequent false alarms render them ineffective because of the “cry-wolf” effect. On the other hand, if warnings are not administered frequently enough, they result in too many potentially costly misses. In this conceptual paper, it is argued that the effectiveness of warnings might be significantly improved if warnings are made more “intelligent” by providing information about the likelihood of the occurrence of the stimulus. Several representative cases are discussed and analyzed in order to demonstrate the advantages of the proposed methods.     

Measurement techniques for organizational safety causal models: Characterization and suggestions for enhancements

Through a review of literature from diverse disciplines with actual and potential application to causal modeling of organizational safety risk, this paper explores issues regarding measurement techniques in a quantitative safety analysis context. The interdependencies of modeling perspectives, constructs, and measures are indentified, leading to (a) characterization and classification of measurement techniques, (b) suggestions on the selection of appropriate measurement methods for different types of model constructs including individual-level, global, configural, and shared, and (c) discussion of the modeling implications of interactions between measurement, constructs, and causal paths. A multi-dimensional perspective is offered through combinations of different “measurement methods” and “measurement bases”. A Bayesian approach is also proposed to operationalize the multi-dimensional measurements. Examples are provided to help explain the roles of these measurements in capturing the relation between organizational factors and safety performance. This paper is a product of research which has the primary purpose of extending Probabilistic Risk Assessment (PRA) modeling frameworks to include the effects of organizational factors as the fundamental causes of accidents and incidents.     

Filterability of oil sands tailings

In Canadian oil sands mining operations, bitumen is extracted from oil sands using the hot water extraction process, which produces tremendous amounts of tailings. Currently, these tailings are disposed of in large ponds, in which coarse particles settle out relatively quickly and fine particles remain suspended in water and settle very slowly. After years of settling, the fine particles form a stable suspension in water known as mature fine tailings (MFTs). Long-term storage of the MFT is costly and poses a major environmental liability.Oil sands companies are now actively investigating different approaches to replace or reduce the use of oil sands tailings ponds. Filtration of the tailings to produce “dry tailings” for stacking is now being investigated as an alternative by a number of companies. Fast water drainage is a critical step for the filtration process. In this paper, we use simple laboratory-scale filtration tests to evaluate the filterability of the oil sands tailings and to generate a parameter that can be used in filtration scale-up. It was found that the filterability of the original coarse oil sands tailings was relatively low. However, after the fines are flocculated with the coarse particles to form uniform flocs the filterability was improved by several orders of magnitude. The results demonstrate that filtration of the flocculated coarse tailings to produce the “dry” stackable tailings may be viable.     

Preliminary study of ballistic impact on an industrial tank: Projectile velocity decay

Since the events of September 11, 2001, the possibility of an intentional act targeting the chemical process industry has become realistic. It is, therefore, a great concern to be able to predict the immediate consequences of such an act. This study is intended to improve our knowledge about the sequence of events that occurs when a high-speed bullet (>1000 m s⁻¹) penetrates a vessel filled with toxic liquid. We find that, prior to liquid ejection, several well-defined phases occur, including the phenomenon known as the “hydraulic ram.” This paper focuses on projectile–target interactions and explains how the decay of projectile velocity is related to the initial conditions of the target.     

Occupational health and safety promotion: Problems and solutions

Most occupational safety and health (OSH) professionals would agree that having a good OSH promotion programme is a challenge, and problems can be encountered at almost every stage in the planning and delivery of the programme.The first obstacle which may be encountered is programme justification. How does one convince employers and employees of the need for OSH promotion, and does competition from “Wellness Programmes” reduce available resources? Programme planning, deciding what constitutes a programme, and what to include in the OSH promotion programme, may be a dilemma. The programme implementation, deciding who implements the activities and how a programme is sustained, may be other difficult issues. Finally, programme evaluation can be problematic: How is it done properly? and Who should evaluate the programme?Possible solutions to these problems may include the costing of work accidents and occupational ill health to justify the need and benefits of an OSH programme, and riding on the bandwagon of “wellness promotion” instead of competition for limited resources. In programme planning, knowing what is wanted and employing a professional to plan the programme is essential. The programme coverage should encompass health and safety issues, and preventive strategies should be directed towards both environment and lifestyle factors. There should be a prioritization of topics according to the needs of workers. The choice of OSH professionals versus “wellness promoters” or human resource officers as programme co-ordinators may affect the programme outcome. Training supervisors and line workers to be trainers would involve those directly in contact with work hazards in the programme. Programme evaluation is crucial. There should be provision for both process and outcome evaluations, and pains should be taken to ensure independence and objectivity of evaluations. The idea of linking programme results to the OSH personnel assessments is worth considering.The delivery of OSH promotion programmes in a relevant and effective manner poses a real challenge. While some obstacles and problems appear to be insurmountable, these challenges have to be faced and overcome in order to achieve the goals of protecting and promoting the health of the worker.     

The effect of aviation safety education on passenger cabin safety awareness

This paper examines the effect of aviation safety education on passenger cabin safety awareness in knowledge, attitude, and behavior (KAB). The educational value of KAB has been addressed in various fields such as AIDS prevention and campus safety. KAB has been applied in aviation safety related areas, especially in training, such as crew resource management training, pilot training, and mechanic training. However, KAB has not been implemented in aviation passenger education in cabin safety. This paper uses the construct of “aviation safety education”, which is intended to influence airline passenger knowledge of, attitude toward, and behavior about cabin safety awareness. Passenger surveys were done at two Taiwan airports. The results show that aviation safety education positively affects airline passenger cabin safety knowledge, attitude, and behavior. We recommend safety education that involves accurate instruction about emergency equipment procedures, situational awareness, emergency responses, and relevant cabin-safety regulations.Our findings indicated that an increase in cabin safety knowledge positively affected airline passenger behavior, which supported knowledge–behavior consistency. We also found that a positive attitude toward cabin safety positively affected airline passenger behavior, which supported attitude–behavior consistency. The hypothesis that cabin safety knowledge positively affected passenger attitude – knowledge–attitude consistency was not supported.     

A learning-by-doing strategy to improve top management involvement in safety

The growth of legal regulations in occupational safety during the 70's alienated to some extent top management from health and safety issues; safety was regarded as an activity of safety professionals and labour inspection. This lack of commitment to safety management led to reduced activity and awareness. However, both research and practice indicate that the role of top management is of crucial importance for achieving results in safety.Having realized the problem and the lack of appropriate training to meet the demands of top management, a program called “One hour for safety management” has been developed. The training is arranged in an “action” setting, during the formal meeting of the executive board of the company. The program consists of four main parts: (1) Principles of modern safety management, (2) The company's accident insurance system, the interdependency between compensation costs and premiums, (3) The safety situation of the company; accidents, premiums and losses, hazards, safety program, and (4) Setting the safety targets and action plans required. More recently, a short audit process has been developed to reveal the important sources of loss and the state of affairs in the company's loss control systems. A special software package includes essential handouts of the safety management meetings complemented by self-auditing tools.The approach initiated or revived top management interest in and awareness of safety in several companies. The success of the meeting seems to depend on several factors, e.g. consultation skills, safety expertise, style of presentation, corporate culture and co-operation in the preparation of the session. The factors that contribute to an effective training for top management should further be analyzed, and the impact of the management training on accident rates is a task for evaluation studies in future.     

What-You-Look-For-Is-What-You-Find – The consequences of underlying accident models in eight accident investigation manuals

Accident investigation manuals are influential documents on various levels in a safety management system, and it is therefore important to appraise them in the light of what we currently know – or assume – about the nature of accidents. Investigation manuals necessarily embody or represent an accident model, i.e., a set of assumptions about how accidents happen and what the important factors are. In this paper we examine three aspects of accident investigation as described in a number of investigation manuals. Firstly, we focus on accident models and in particular the assumptions about how different factors interact to cause – or prevent – accidents, i.e., the accident “mechanisms”. Secondly, we focus on the scope in the sense of the factors (or factor domains) that are considered in the models – for instance (hu)man, technology, and organization (MTO). Thirdly, we focus on the system of investigation or the activities that together constitute an accident investigation project/process. We found that the manuals all used complex linear models. The factors considered were in general (hu)man, technology, organization, and information. The causes found during an investigation reflect the assumptions of the accident model, following the ‘What-You-Look-For-Is-What-You-Find’ or WYLFIWYF principle. The identified causes typically became specific problems to be fixed during an implementation of solutions. This follows what can be called ‘What-You-Find-Is-What-You-Fix’ or WYFIWYF principle.