Medical Waste Disposal

Medical (biomedical) wastes pose numerous potential health and safety hazards. In addition to their infectious and toxic characteristics, the highly variable and inconsistent nature of medical waste streams has increased public concern about storage, treatment, transportation, and ultimate disposal.

In recent years, techniques have been developed to reduce human exposure to the toxic and infectious components of medical wastes. The most commonly used techniques include internal segregation, containment, and incineration. Other common techniques include grinding, shredding, and disinfection, e.g., autoclaving and chemical treatment followed by landfilling.

Of all the available technologies for medical waste treatment and disposal, incineration has been found to be the most effective method overall for destroying infectious and toxic material, volume reduction, and weight reduction in the medical waste stream, incineration destroys the broadest variety of medical waste constituents and can recover energy from the medical waste stream. Incineration also is an appropriate alternative to burial of human pathological remains.     

Hazardous Waste Minimization: Part II Waste Minimization in the Electronics Products Industries

An overview is provided of the production processes, waste generation, and waste management of the electronics products industries. Chosen product areas include electron tubes, semiconductors, capacitors/resistors, and printed circuit/wiring boards. Examples are given of specific processes and associated waste streams. Waste minimization activities are identified, and specific examples of successful applications provided. While faced with a wide variety of waste streams, many opportunities for waste minimization exist and await only application.     

Automated Economic Analysis Model For Hazardous Waste Minimization

Abstract

The U.S. Army has established a policy of achieving a 50 percent reduction in hazardous waste generation by the end of 1992. To assist the Army in reaching this goal, the Environmental Division of the U.S. Army Construction Engineering Research Laboratory (USACERL) designed the Economic Analysis Model for Hazardous Waste Minimization (EAHWM). The EAHWM was designed to allow the user to evaluate the life cycle costs for various techniques used in hazardous waste minimization and to compare them to the life cycle costs of current operating practices. The program was developed in C language on an IBM compatible PC and is consistent with other pertinent models for performing economic analyses. The potential hierarchical minimization categories used in EAHWM Include source reduction, recovery and/or reuse, and treatment. Although treatment is no longer an acceptable minimization option, its use is widespread and has therefore been addressed in the model. The model allows for economic analysis for minimization of the Army’s six most important hazardous waste streams. These include, solvents, paint stripping wastes, metal plating wastes, industrial waste-sludges, used oils, and batteries and battery electrolytes. The EAHWM also includes a general application which can be used to calculate and compare the life cycle costs for minimization alternatives of any waste stream, hazardous or non-hazardous. The EAHWM has been fully tested and implemented in more than 60 Army installations in the United States.     

Chemical Manufacturers Association 1984 Hazardous Waste Survey

This paper discusses the Chemical Manufacturers Association's 1984 survey of the chemical industry's hazardous waste management practices. The survey data include a breakdown of how the industry's hazardous wastes are managed, detailing generation, treatment and disposal, and cover 725 plants in 81 companies. The 1984 survey is the third CM A hazardous waste survey, and the paper discusses resultant waste treatment trends from 1981- 1984, the period covered by previous surveys. A total of 278.5 million tons of hazardous waste was treated and disposed by survey respondents. Of this, 276.8 million tons was hazardous wastewater and 1.7 million tons was solid hazardous waste. The survey solid hazardous waste total was projected to the entire industry (Standard Industrial Code 2800) and is estimated at 6.9 million tons. The survey showed continued decreasing trends in hazardous waste generation in the chemical industry. It demonstrated changes in hazardous waste management practices, with decreased use of landfills and increased incineration of the solid wastes that are generated.     

Key factors in chemical reduction by hydrazine for recovery of precious metals

Most of the commonly used metal waste treatment approaches only allow removal of metals which are ultimately discarded as sludge and do not permit the reuse of the metals, resulting in a waste of raw materials. In this study, the recovery of precious metals of sliver and copper in a synthesized wastewater in batch reactors was investigated using a reduction method by hydrazine as the reducing agent. Recovery of metal ions was greatest at pH > 11. The presence of humic acid did not have negative effects on the recovery process. Varying dissolved oxygen levels in the hydrazine solution did not significantly affect the recovery of both metals while seeding and ageing processes resulted in an increase in the particle size of the solid obtained. Under competitive conditions between Cu2+ and Ag+ ions, the recovery of silver remained the same, while that of copper was enhanced.     

Application of reutilization technology to calcium fluoride sludge from semiconductor manufacturers

Glass ceramics were prepared from mixtures of wastes generated from refining of waste glass and semiconductor industrial wastewater sludge. The aim is then indeed to study the possible use and effects of integrating calcium fluoride (CaF2) as present in semiconductor wastewater sludge in the silica (glass) melts. CaF2 sludge was blended with a conditioner according to characteristics of the target. Calcium oxide-silicon dioxide-aluminum oxide system glass ceramics have relatively high melting points. Addition of CaF2 sludge to fluxes can significantly reduce the melting point and hence improve the kinetics of the reactions. CaF2 sludge and waste glass were co-melted in various ratios to elucidate their interactions at various heating temperatures. The results indicate that the lowest melting temperature was 1163 degrees C, obtained for the CaF2 sludge-waste glass mixture at a ratio 6:4 (wt:wt), which is significantly lower than that of CaF2 sludge (1378 degrees C). The benefits of using melting to dispose of sludge are the reduction of waste and the fixation of heavy metals. Heat treatment was used to convert the obtained glass into glass ceramics. Heavy metal leaching tests revealed that melting conditions lowered the heavy metal concentrations in the leachate to an order of magnitude lower than that in the sludge. Consequently, industrial sludge can be safely used as a fine aggregate material for a potentially wide range of construction applications.     

电镀工业污染最小化技术

通过分析电镀行业工艺现状,总结了电镀工业废水的产生,特性,现有的治理措施及存在的问题,提出了更新原料,减少用水量及提高回收率污染最小化技术的方案。事实证明,实行污染最小化技术是电镀行业减小污染排放,提高经济效益切实可行的方法。     

Interactive Analysis of Waste Recycling and Energy Recovery Program in a Small-Scale Incinerator

Abstract

Conflicting goals affecting solid waste management are explored in this paper to find the best implementation of resource recovery with a small-scale waste-to-energy process. Recycling paper and plastic material often leaves a shortage of thermal energy to support incineration that forces operators to supplement the process with auxiliary fuels. Although there are considerable profits to be made from material recovery, the increase of fuel usage causes conflict given that it is cost prohibitive. A series of trials performed on a small-scale 1.5-t/day incineration plant with a cyclone heat recovery system found that material recycling can impede performance. Experimental results are expressed as empirical regression formulas with regard to combustion temperature, energy transfer, and heat recovery. Process optimization is possible if the waste moisture content remains <30%. To test the robustness of the optimization analysis, a series of sensitivity analyses clarify the extent of material recycling needed with regard to plastic, paper, and metal. The experiments also test whether the moisture in the waste would decrease when recycling paper because of its exceptional capacity to absorb moisture. Results show that recycling paper is strongly recommended when the moisture content is >20%, whereas plastic recycling is not necessary at that moisture condition. Notably, plastic recovery reduces the heat needed to vaporize the water content of the solid waste, thus it is recommended only when the moisture content is <10%. For above-normal incineration temperatures, plastic recycling is encouraged, because it removes excess energy. Metal is confirmed as an overall priority in material recycling regardless of the moisture content of the incoming waste.     

Refinery Sludge Treatment/Hazardous Waste Minimization Via Dehydration and Solvent Extraction

Abstract

The patented Carver-Greenfield (C-G) Process®, a combination of dehydration and solvent extraction treatment technologies, has a wide range of uses in separating hydrocarbon solvent-soluble hazardous organic contaminants (indigenous oil) from sludges, soils, and industrial wastes. As a result of this treatment, the products from a C-G Process facility are: ? Clean, dry solids which are typically suitable for disposal in nonhazardous landfills;

? Water which is treatable in an industrial or Publicly Owned Treatment Works (POTW) wastewater treatment facility;

? Extracted indigenous oil containing hydrocarbon soluble contaminants which may be recycled or reused or disposed of at less cost because its volume is smaller than the original waste feed.

The C-G Process was demonstrated on spent oily drilling fluids as part of the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation (SITE) Program. This paper summarizes the use of the C-G Process for economical treatment and minimization of hazardous refinery wastes, reviews the SITE program results, and describes extending the C-G Process technology to treatment of other wastes. Estimated treatment costs are presented.     

Treatment Technologies For Hazardous Wastes: Part IV A Review of Alternative Treatment Processes for Metal Bearing Hazardous Waste Streams

The U.S. Congress and the U.S. Environmental Protection Agency believe that treatment and recovery techniques should be given maximum priority when considering methods for managing the nation's generated hazardous waste. A prohibition for the disposal of certain categories of hazardous wastes either directly onto or into the land without being treated to an accepted degree prior to such disposal practice has been promulgated.¹ Wastes containing toxic metals and cyanide complexes have been selected as a group to be restricted. Due to the high generation rate associated with this category, a large capacity of waste treatment processing will be required. Existing and emerging treatment alternatives which are or have the potential to be employed for waste treatment of metal bearing wastes are presented in this paper.     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Waste Reduction Practices at Two Chromated Copper Arsenate Wood-Treating Plants

Abstract

Two chromated copper arsenate (CCA) wood-treating plants were assessed for their waste reduction practices. The objectives of this study were to estimate the amount of hazardous wastes that a well-designed and well-maintained CCA treatment facility would generate and to identify waste reduction opportunities. These practices have been reflected in several areas, including facility designs, process controls, and management practices. The facility designs included enclosed treatment buildings, covered drip pads, a drip pan, an automatic lumber handling system, power rollers, computerized chemical mixing systems, spill containments, and air ventilation systems to minimize mist or droplet emissions from cylinders and work tanks. Management practices have included pretreatment quality control, improved housekeeping, resource recovery and recycling, and operator training.     

Hazardous Waste Minimization: Part I Waste Reduction in the Chemical Industry

Recognizing the need for minimizing the generation of hazardous waste, the chemical industry is experiencing a surge in the initiation of programs for reducing such waste. With a new realization that the cost of handling waste may be many times higher than the value of the materials lost in it, the industry needs to examine a new end-point for optimizing its processes; one that includes the total cost of waste management as well as the conventional cost elements such as raw materials, power and the like. The authors discuss some of the problems that industry is encountering; then describe Du Pont’s approach to waste reduction in terms of administrative and technical activities. They emphasize that, in addition to meeting environmental needs, waste reduction often makes good sense solely from an economic point of view.     

Polymers as Solid Waste in Municipal Landfills

Abstract

Synthetic polymers reach municipal landfills as components of products such as waste household paints, packaging films, storage containers, carpet fibers, and absorbent sanitary products. Some polymers in consumer products that reach landfills are designed to photodegrade or biodegrade. This article examines the significance of degradable polymers in management of solid waste in municipal landfills. Most landfills are not designed to photodegrade or biodegrade solid waste. Landfill disposal of stable polymers such as polyacrylics and polyethylenes is not associated with significant polymer degradation or mobility. Stability to photodegradation and biodegradation is an advantage when municipal landfills are used for disposal of polymer products as solid waste. Use of landfill disposal can be a responsible means to manage polymer waste and can be part of an overall waste management plan which includes source reduction, recycling, reuse, composting, and waste-to-energy incineration.     

Source Reduction and the Waste Management Hierarchy

Source reduction and the waste management hierarchy have become the subject of considerable controversy. This paper describes the two extreme positions on source reduction and places them in context in the debate on how to better manage waste. It uses case studies to illustrate that the polar positions are ideological and that such simplistic views lead to inaction. It argues for compromise positions and emphasizes that improved hazardous substances management will come about not through further debate but through implementing solutions on a case-by-case basis. Some measures may prove appropriate only for certain plants and operations; other measures may apply across an entire industry.     

Comparison of environmental effects and resource consumption for different wastewater and organic waste management systems in a new city area in Sweden

An analysis of the environmental effects and resource consumption by four systems for management of wastewater and organic household waste in a new city area have been performed, as follows: (1) conventional system complemented with advanced sludge treatment for phosphorus recovery, (2) blackwater system with urine diversion and food waste disposers, (3) blackwater system with food waste disposers and reverse osmosis, and (4) local wastewater treatment plant with nutrient recovery by using reverse osmosis. Substance-flow analysis and energy/exergy calculations were performed by using the software tool URWARE/ORWARE. Emissions were calculated and classified based on the impact categories global warming potential, acidification, and eutrophication, according to ISO 14042 (2000). The analysis also included nutrient recovery (i.e., the potential to use nutrients as a fertilizer). Depending on which aspects are prioritized, different systems can be considered to be the most advantageous.     

Control Technologies for Remediation of Contaminated Soil and Waste Deposits at Superf und Lead Battery Recycling Sites

This paper primarily addresses remediation of contaminated soils and waste deposits at defunct lead-acid battery recycling sites (LBRS) via immobilization and separation processes. A defunct LBRS is a facility at which battery breaking, secondary lead smelting, or both operations were performed for the primary purpose of reclaiming lead from spent lead-acid batteries. Metallic lead and lead compounds are generally the principal contaminants of concern in soils and waste deposits (i.e., buried, piled, landfilled waste) at these sites. Other metals (e.g., cadmium, copper, arsenic, antimony, and selenium) are often present at LBRS, but usually at much lower concentrations than lead and often present below hazardous concentrations. This article is primarily based on experience gained from: (1) Superfund site investigation, removal, and remedial actions, and (2) development and demonstration of control technologies under the Superfund Innovative Technology Evaluation (SITE) Program. The primary remedial options for lead contaminated soils and waste deposits include: (1) no action, (2) off-site disposal, (3) containment, (4) immobilization, (5) separation with resource recovery, and (6) separation without resource recovery. In spite of the toxicity of lead at low concentrations, the relative immobility of lead and site-specific risk assessments can still result in the selection of no action or containment remedies. Solidification/stabilization of lead-contaminated soils has been implemented at three Superfund sites and is the selected remedy at several others. Separation technologies (e.g., screening, extraction) are attractive because, if successful, they actually remove the contaminant from the environmental media. Separation technologies also offer the possibility that a valuable product (e.g., lead, plastic, energy) can be recovered, but careful consideration of economic and technical factors are required. Compared to the implementation of containment and solidification I stabilization remedies, separation technologies tend to be relatively novel, complex, and costly.     

Water purification by sulfide-containing activated carbon

We investigated a new kind of activated carbon named gaiasafe-Formstoff [1] as an agent for powerful heavy metal reduction. This activated carbon contains highly dispersed sulfide compounds. Our investigations with lead containing wastewaters showed an outstanding metal sulfide precipitation power of the new agent. The lead reduction rates are independent of wastewater parameters like lead concentration and complexing agent concentration. Contacted as powder or as a fixed bed with wastewater gaiasafe-Formstoff showed the best cleaning capacity in comparison to all other agents tested. Investigations with gaiasafe-Formstoff about its ability to reduce the contents of further heavy metals in wastewater are under way. The gaiasafe-Formstoff reaction products with wastewater represent an energy-rich and raw material-rich resource when fed to metallurgical processes.     

Avoiding Land Disposal of Hazardous Waste

In response to a growing societal mandate, land disposal of hazardous wastes is gradually being replaced by treatment technologies. This shift to "alternative technologies" is the result of the impacts of past land disposal practices on other environmental media (groundwater, surface water, and air). A prime motivation for adopting alternatives to land disposal is to eliminate these cross-media impacts. Alternative technologies, however, can themselves have cross-media environmental impacts which must be recognized and addressed before such technologies are extensively applied. This paper discusses hazardous waste constituents, common disposal practices, alternative technologies currently being applied, possible cross-media environmental impacts of the alternative technologies, and proposed methods of mitigating these environmental impacts. Case studies from uncontrolled hazardous waste sites and industrial operations are used to illustrate the application of alternative technologies. Case studies include the application of waste treatment technologies as well as the adoption of waste minimization techniques.     

An Analysis of Biomedical Waste Incineration

The California Air Resources Board (ARB) completed a series of source tests of eight operating biomedical waste incinerators (BMWI) under conditions of typical operation. The emissions of certain metals, and chlorinated dioxins and furans in the flue gases of BMWI are relatively high in comparison to emissions from other combustion sources, such as hazardous waste or municipal waste incinerators of modern design. This study reports on an analysis of the status of the existing regulatory framework and the California data base. Clarification of definitional issues at the federal level is needed to effectively treat BMWI management issues. Although few relationships among combustion parameters and emissions were uncovered, patterns of emissions were evident, suggesting commonality and relationships among the waste stream constituents and emissions. Potential implications for future research, operation of BMWI, controls and source reduction and waste segregation strategies are also discussed.