Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes

A new electrocoagulation process based on bipolar aluminum electrode is proposed. The placement angles of bipolar electrode are key parameter. The numerical simulations support the experimental results. We in our previous study reported the wireless electrocoagulation (WEC) based on bipolar electrochemistry for water purification. One of the most important advantages of WEC is the omission of ohmic connection between bipolar electrode (BPE) and power supply, and thus the electrochemical reactions on BPE are driven by electric field in solution induced by driving electrodes. In this study, the impact of placement angle of bipolar aluminum electrode on WEC was investigated to provide a detailed analysis on the correlations between the bipolar electrode placement angle and bipolar electrocoagulation reactions. The results showed that the WEC cell with a horizontal BPE placed at 0° produced the maximum dissolved aluminum coagulant, accounting for 71.6 % higher than that with a vertical one placed at 90°. Moreover, the finite element simulations of current and potential distribution were carried out along the surface of BPE at different placement angles, revealing the mechanism of different BPE placement angles on aluminum dissolution rates in WEC system.     

Effects of eggshell addition on calcium-deficient acid soils contaminated with heavy metals

The eggshell was used to remediate the contaminated soil by heavy metals. The eggshell addition decreased the available state of the heavy metals. The available calcium in the soil increased due to eggshell addition. The efficiency was investigated in different moisture conditions. In this study, effects of water conditions (flooded, wet, or dry) and eggshell dosages (0, 0.1, 1.0, and 10.0 g/kg soil, respectively) on pH variation, content of unavailable state of heavy metals, form of heavy metals, and available nutritious element calcium (Ca) in acid soils contaminated with heavy metals were investigated, respectively. The soil samples were continuously cultivated indoors and analyzed by toxicity characteristic leaching procedure and community bureau of reference (BCR) sequential extraction procedure. The results showed that the addition of eggshell could effectively improve the pH of acid soil and increase it to neutral level. Moreover, the contents of unavailable state of heavy metals Cu, Zn, and Cd increased significantly. Furthermore, when the soil was cultivated under the flooded condition with 1.0 g/kg eggshell, the unavailable state of Cu, Zn, and Cd increased the most, and these heavy metals were transformed into residual state. On the other hand, the amount of available state of Ca increased to 432.19 from 73.34 mg/kg with the addition of 1.0 g/kg eggshell, which indicated that the addition of eggshell dramatically improved the available state of Ca. Therefore, eggshell could ameliorate the soil environment as it led to the decrease of available heavy metals and improvement of fertilization effectively. In a word, this study indicates that the addition of eggshell would be a new potential method for remediation of acid field soils contaminated with heavy metals.     

Effective removal of Cd2+ and Pb2+ pollutants from wastewater by dielectrophoresis-assisted adsorption

Dielectrophoresis (DEP) process could enhance the removal the Cd²⁺ and Pb²⁺ with less absorbent. The removal rates of both Cd²⁺ and Pb²⁺ increased with the increase of voltage. The overall removal rate of Cd²⁺ and Pb²⁺ in the binary system is higher than that of Cd²⁺ or Pb²⁺ in the single system. DEP could cause considerable changes of the bentonite particles in both surface morphology and microstructure. Dielectrophoresis (DEP) was combined with adsorption (ADS) to simultaneously and effectively remove Cd²⁺ and Pb²⁺ species from aqueous solution. To implement the process, bentonite particles of submicro-meter size were used to first adsorb the heavy metal ions. These particles were subsequently trapped and removed by DEP. The effects of the adsorbent dosage, DEP cell voltage and the capture pool numbers on the removal rate were investigated in batch processes, which allowed us to determine the optimal experimental conditions. The high removal efficiency, 97.3% and 99.9% for Cd²⁺ and Pb²⁺, respectively, were achieved when the ions are coexisting in the system. The microstructure of bentonite particles before and after ADS/DEP was examined by scanning electron microscopy. Our results suggest that the dielectrophoresis-assisted adsorption method has a high capability to remove the heavy metals from wastewater.     

Identifying factors that influence soil heavy metals by using categorical regression analysis: A case study in Beijing,China

A method was proposed to identify the main influence factors of soil heavy metals. The influence degree of different environmental factors was ranked. Parent material, soil type, land use and industrial activity were main factors. Interactions between some factors obviously affected soil heavy metal distribution. Identifying the factors that influence the heavy metal contents of soil could reveal the sources of soil heavy metal pollution. In this study, a categorical regression was used to identify the factors that influence soil heavy metals. First, environmental factors were associated with soil heavy metal data, and then, the degree of influence of different factors on the soil heavy metal contents in Beijing was analyzed using a categorical regression. The results showed that the soil parent material, soil type, land use type, and industrial activity were the main influencing factors, which suggested that these four factors were important sources of soil heavy metals in Beijing. In addition, population density had a certain influence on the soil Pb and Zn contents. The distribution of soil As, Cd, Pb, and Zn was markedly influenced by interactions, such as traffic activity and land use type, industrial activity and population density. The spatial distribution of soil heavy metal hotspots corresponded well with the influencing factors, such as industrial activity, population density, and soil parent material. In this study, the main factors affecting soil heavy metals were identified, and the degree of their influence was ranked. A categorical regression represents a suitable method for identifying the factors that influence soil heavy metal contents and could be used to study the genetic process of regional soil heavy metal pollution.     

Application and mechanism of polysaccharide extracted from Enteromorpha to remove nano-ZnO and humic acid in coagulation process

Green source Ep was extracted from marine alga waste. The molecule model structure of Ep was studied and constructed. PAC-Ep coagulation system improves the efficiency of removal efficiency. Synergistic effects between NPs and HA make a big difference to enhance efficiency. Mechanism is charge neutralization, hydrogen bonding and adsorbing-complexing Enteromorpha polysaccharide (Ep) extracted from alga a novel green coagulant aid for nanoparticles (NPs) and heavy metal ions removal and the structure of EP was intensively studied in this study. The integration of Ep with polyaluminum chloride (PAC-Ep) coagulants exhibited higher coagulation performance than that of the polyaluminum chloride (PAC) because of the negatively charged NPs suspension and humic aid (HA) solution. Significant high removal efficiencies of dissolved organic matter (94.1%), turbidity (99.3%) and Zn ions (69.3%) were achieved by the PAC-Ep coagulants. The dual-coagulation properties of PAC-Ep for different pollutants was based on multiple mechanisms, including (i) Al³⁺ charge neutralization; (ii) hydroxy aluminum hydroxyl bridging formed polynuclearhydroxy complexes bridge and sweep colloidal particles; (iii) adsorption and bridging of Ep chain for the NPs and heavy metal ions. Results indicated that the destabilization of colloid was induced by the coexisting HA and higher removal was achieved as ions adsorption was enhance in the presence of HA complexation. On the basis of that, the extraction of polysaccharide is a promising candidate for its high coagulation performance in water treatment.     

Statistical modeling of radiolytic (60Co g) degradation of Ofloxacin,antibiotic: Synergetic effect,kinetic studies & assessment of its degraded metabolites

Linear, interactive and quadratic effects of process parameters were studied. Degradation of Ofloxacin (Ofx) was related with G value of irradiation process. The synergistic effect of H₂O₂ on lower dose of g-irradiation was established. The process follows pseudo first order with dose constant (d = 0.232 kGy^–1). The impact of human activities in the past few decades has paved the way for the release of pollutants due to the improper effluent treatment. Recent studies revealed that, Ofloxacin, an antibiotic as one of the major pollutant affecting surface water and ground water. In this study, the radiolytic potential of Ofloxacin was investigated. The effects of pH, dose and concentration of Ofloxacin were analyzed using One Factor At a Time (OFAT) and the interactive effects between the parameters were studied using Face Centered Central Composite Design. The statistically optimised developed model shows 30% degradation at initial antibiotic concentration of 1mM at pH 3.0 and at 2 kGy dose of gamma ray. The process efficiency was evaluated in terms of G value and its correlation with the concentration of antibiotic was also established. The process of degradation was augmented by the addition of H₂O₂ (1.5 mM). The reaction kinetics for the process was evaluated, the dose rate constant and the rate of degradation for the augmented process was found to be 0.232 kGy^-1 and 0.232 mM/kGy, respectively. The degraded metabolites of the radiolytic degradation of Ofloxacin were analyzed through change in pH, reduction in TOC and GC-MS spectrum.     

Combined Fenton process and sulfide precipitation for removal of heavy metals from industrial wastewater: Bench and pilot scale studies focusing on in-depth thallium removal

Addition of alkali to pH 10 is effective for precipitation of precipitable metals. Fenton treatment is effective for substantial removal of Tl, Cd, Cu, Pb, and Zn. Sulfide precipitation is a final step for removal of trace Tl, Cd, Cu, Pb, and Zn. Bench and pilot studies demonstrated the effectiveness of this combined technique. Thallium (Tl) in industrial wastewater is a public health concern due to its extremely high toxicity. However, there has been limited research regarding Tl removal techniques and engineering practices to date. In this investigation, bench and pilot studies on advanced treatment of industrial wastewater to remove Tl to a trace level were conducted. The treatment process involved a combination of hydroxide precipitation, Fenton oxidation, and sulfide precipitation. While hydroxide precipitation was ineffective for Tl+ removal, it enabled the recovery of approximately 70%–80% of Zn as Zn hydroxide in alkaline conditions. The Fenton process provided good Tl removal (>95%) through oxidation and precipitation. Tl was then removed to trace levels (<1.0 µg/L) via sulfide precipitation. Effective removal of other heavy metals was also achieved, with Cd<13.4 µg/L, Cu<39.6 µg/L, Pb<5.32 µg/L, and Zn<357 µg/L detected in the effluent. X-ray photoelectron spectroscopy indicated that Tl2S precipitate formed due to sulfide precipitation. Other heavy metals were removed via the formation of metal hydroxides during hydroxide precipitation and Fenton treatment, as well as via the formation of metal sulfides during sulfide precipitation. This combined process provides a scalable approach for the in-depth removal of Tl and other heavy metals from industrial wastewater.     

Metallic wastewater treatment by sulfate reduction using anaerobic rotating biological contactor reactor under high metal loading conditions

An-RBC reactor is highly suited to treat metallic wastewater. Metal removal is due to sulfide precipitation via sulfate reduction by SRB. Cu(II) removal was the best among the different heavy metals. Maximum metal removal is achieved at low metal loading condition. Metal removal matched well with the solubility product values of respective metal sulfide salts. This study was aimed at investigating the performance of anaerobic rotating biological contactor reactor treating synthetic wastewater containing a mixture of heavy metals under sulfate reducing condition. Statistically valid factorial design of experiments was carried out to understand the dynamics of metal removal using this bioreactor system. Copper removal was maximum (>98%), followed by other heavy metals at their respective low inlet concentrations. Metal loading rates less than 3.7 mg/L?h in case of Cu(II); less than 1.69 mg/L?h for Ni(II), Pb(II), Zn(II), Fe(III) and Cd(II) are favorable to the performance of the An-RBC reactor. Removal efficiency of the heavy metals from mixture depended on the metal species and their inlet loading concentrations. Analysis of metal precipitates formed in the sulfidogenic bioreactor by field emission scanning electron microscopy along with energy dispersive X-ray spectroscopy (FESEM-EDX) confirmed metal sulfide precipitation by SRB. All these results clearly revealed that the attached growth biofilm bioreactor is well suited for heavy metal removal from complex mixture.     

Distribution and removal of antibiotic resistance genes during anaerobic sludge digestion with alkaline,thermal hydrolysis and ultrasonic pretreatments

Sludge digestion is critical to control the spread of ARGs from wastewater to soil. Fate of ARGs in three pretreatment-AD processes was investigated. UP was more efficient for ARGs removal than AP and THP in pretreatment-AD process. The total ARGs concentration showed significant correlation with 16S rRNA gene. The bacteria carrying ARGs could be mainly affiliated with Proteobacteria. Sewage sludge in the wastewater treatment plants contains considerable amount of antibiotic resistance genes (ARGs). A few studies have reported that anaerobic digestion (AD) could successfully remove some ARGs from sewage sludge, but information on the fate of ARGs in sludge pretreatment-AD process is still very limited. In this study, three sludge pretreatment methods, including alkaline, thermal hydrolysis and ultrasonic pretreatments, were compared to investigate the distribution and removal of ARGs in the sludge pretreatment-AD process. Results showed that the ARGs removal efficiency of AD itself was approximately 50.77%, and if these three sludge pretreatments were applied, the total ARGs removal efficiency of the whole pretreatment-AD process could be improved up to 52.50%–75.07%. The ultrasonic pretreatment was more efficient than alkaline and thermal hydrolysis pretreatments. Although thermal hydrolysis reduced ARGs obviously, the total ARGs rebounded considerably after inoculation and were only removed slightly in the subsequent AD process. Furthermore, it was found that the total ARGs concentration significantly correlated with the amount of 16S rRNA gene during the pretreatment and AD processes, and the bacteria carrying ARGs could be mainly affiliated with Proteobacteria.     

Evaluating heavy metal contamination of riverine sediment cores in different land-use areas

• Metal pollution was studied in riverine sediments from different land-use areas. • Cd was the most serious heavy metal contaminant in riverine sediment cores. • Riverine sediment cores from industrial area were most polluted by heavy metals. • B1 fraction determined metal pollution, risk and toxicity in riverine sediments. Anthropogenic activities are regarded as the main sources of heavy metal pollution, yet few studies have investigated the effects of land-use setting on heavy metal accumulation in riverine sediments. Based on both total contents and geochemical fractions, heavy metal pollution, risk and toxicity were determined in riverine sediment cores from different land-use areas (mountain area- MA, farm area- FA, city area- CA, and industrial area- IA) of the Yang River Basin in North China. The results showed that FA had higher contents of riverine sedimentary Cu; CA had higher contents of Cd; IA had higher contents of both Cd and Zn. Most riverine sediments from FA and IA were contaminated with the investigated metals, although these concentrations were evaluated to have low potential ecological risk and no toxicity to benthic organisms. However, a high proportion of Cd in the B1 fraction of riverine sediments in IA indicating high risk should receive more attention. The B1 fraction largely determined the contamination, risk and toxicity levels associated with heavy metals in the riverine sediments of the Yang River Basin.     

Anaerobic phenanthrene biodegradation with four kinds of electron acceptors enriched from the same mixed inoculum and exploration of metabolic pathways

Anaerobic phenanthrene biodegradation enriched process was described in detail. The enriched bacterial communities were characterized under four redox conditions. The enriched archaeal communities were stated under high percentage conditions. Relatively intact pathways of anaerobic phenanthrene biodegradation were proposed. Polycyclic aromatic hydrocarbons (PAHs) are widespread and persistent contaminants worldwide, especially in environments devoid of molecular oxygen. For lack of molecular oxygen, researchers enhanced anaerobic zones PAHs biodegradation by adding sulfate, bicarbonate, nitrate, and iron. However, microbial community reports of them were limited, and information of metabolites was poor except two-ring PAH, naphthalene. Here, we reported on four phenanthrene-degrading enrichment cultures with sulfate, bicarbonate, nitrate, and iron as electron acceptors from the same initial inoculum. The high-to-low order of the anaerobic phenanthrene biodegradation rate was the nitrate-reducing conditions>sulfate-reducing conditions>methanogenic conditions>iron-reducing conditions. The dominant bacteria populations were Desulfobacteraceae, Anaerolinaceae, and Thermodesulfobiaceae under sulfate-reducing conditions; Moraxellaceae, Clostridiaceae, and Comamonadaceae under methanogenic conditions; Rhodobacteraceae, Planococcaceae, and Xanthomonadaceae under nitrate-reducing conditions; and Geobacteraceae, Carnobacteriaceae, and Anaerolinaceae under iron-reducing conditions, respectively. Principal component analysis (PCA) indicated that bacteria populations of longtime enriched cultures with four electron acceptors all obtained significant changes from original inoculum, and bacterial communities were similar under nitrate-reducing and iron-reducing conditions. Archaea accounted for a high percentage under iron-reducing and methanogenic conditions, and Methanosarcinaceae and Methanobacteriaceae, as well as Methanobacteriaceae, were the dominant archaea populations under iron-reducing and methanogenic conditions. The key steps of phenanthrene biodegradation under four reducing conditions were carboxylation, further ring system reduction, and ring cleavage.     

Comparison of CNT-PVA membrane and commercial polymeric membranes in treatment of emulsified oily wastewater

CNT-PVA membrane was fabricated and compared with polymeric membranes. The separation performance was evaluated by homemade and cutting fluid emulsions. The three membranes show similar oil retention rates. CNT-PVA membranes have higher permeation fluxes compared with polymeric membranes. CNT-PVA membrane shows higher fouling resistance. Membrane separation is an attractive technique for removal of emulsified oily wastewater. However, polymeric membranes which dominate the current market usually suffer from severe membrane fouling. Therefore, membranes with high fouling resistance are imperative to treat emulsified oily wastewater. In this study, carbon nanotube-polyvinyl alcohol (CNT-PVA) membrane was fabricated. And its separation performance for emulsified oily wastewater was compared with two commercial polymeric membranes (PVDF membrane and PES membrane) by filtration of two homemade emulsions and one cutting fluid emulsion. The results show that these membranes have similar oil retention efficiencies for the three emulsions. Whereas, the permeation flux of CNT-PVA membrane is 1.60 to 3.09 times of PVDF membrane and 1.41 to 11.4 times of PES membrane, respectively. Moreover, after five consecutive operation circles of filtration process and back flush, CNT-PVA membrane can recover 62.3% to 72.9% of its initial pure water flux. However, the pure water flux recovery rates are only 24.1% to 35.3% for PVDF membrane and 6.0% to 26.3% for PES membrane, respectively. Therefore, CNT-PVA membrane are more resistant to oil fouling compared with the two polymeric membranes, showing superior potential in treatment of emulsified oily wastewater.     

Performance and mechanistic study on electrocoagulation process for municipal wastewater treatment based on horizontal bipolar electrodes

• EC modified with BPEs enhances pollutant removal and reduce energy consumption. • Increasing BPE number cannot increase flocculants yield exponentially. • Simulations help to predict the distribution of electrochemical reactions on BPEs. The design of electrodes is crucial to electrocoagulation process (EC), specifically, with respect to pollutant removal and energy consumption. During EC, the mechanisms for interaction between different electrode arrangement and electrode reactions remain unclear. This work presents an integrated EC process based on horizontal bipolar electrodes (BPEs). In the electrochemical cell, the graphite plates are used as driving cathode while either Fe or Al plates serves as driving anode and BPEs. The BPEs are placed horizontally between the driving electrodes. For municipal wastewater treatment, the pollutant removal efficiency and energy consumption in different configurations of two-dimension electrocoagulation (2D-EC) system with horizontal BPEs were investigated. The removal efficiency of turbidity, total phosphorus and total organic carbon increased significantly with the number of BPEs. Noted that the energy consumption for TP removal decreased by 75.2% with Fe driving anode and 81.5% with Al driving anode than those of 2D-EC, respectively. In addition, the physical field simulation suggested the distributions of potential and current in electrolyte and that of induced charge density on BPE surface. This work provides a visual theoretical guidance to predict the distribution of reactions on BPEs for enhanced pollutant removal and energy saving based on electrocoagulation process for municipal wastewater treatment.     

Association between heavy metals and antibiotic-resistant human pathogens in environmental reservoirs: A review

Heavy metals can act as co-selecting agents and promote antibiotic resistance. Most frequent resistances to heavy metals are observed for zinc and cadmium. P. aeruginosa and E. coli are commonly resistant to heavy metals and antibiotics. Heavy metals proliferate antibiotic resistance through co- and cross-resistance. Heavy metal and antibiotic resistances are common near anthropogenic activities. Antibiotic resistance in human pathogens can proliferate under selective pressures. Heavy metals in environmental reservoirs may contribute to selecting antibiotic-resistant strains. To determine the associations between heavy metals and antibiotic resistance, a literature review was conducted to systematically collect and categorize evidence for co-occurrence of resistance to heavy metals and antibiotics within human pathogenic bacteria in water, wastewater, and soil. In total, 42 publications adhered to inclusion criteria. Across the reservoirs, zinc and cadmium were the most commonly observed heavy metals associated with resistance to antibiotics. Pseudomonas aeruginosa and Escherichia coli were the most commonly studied bacteria with reported co-occurrence of resistance to several heavy metals and antibiotic classes. As co-selecting agents, prevalence of heavy metals in the environment can proliferate resistance to heavy metals and antibiotics through co-resistance and cross-resistance mechanisms. In comparing different reservoirs, soils and sediments harbor higher heavy metal and antibiotic resistances compared to water environments. Additionally, abiotic factors such as pH can affect the solubility and hence, the availability of heavy metals to bacterial pathogens. Overall, our review demonstrates heavy metals act as co-selecting agents in the proliferation of antibiotic resistance in human pathogens in multiple environmental reservoirs. More studies that include statistical data are needed to further describe the exposure-response relationships between heavy metals and antibiotic resistance in different environmental media. Moreover, integration of culture-based and molecular-based methods in future studies are recommended to better inform our understanding of bacterial co- and cross-resistance mechanisms to heavy metals and antibiotics.     

Fe2O3-CeO2-Bi2O3/γ-Al2O3 catalyst in the catalytic wet air oxidation (CWAO) of cationic red GTL under mild reaction conditions

Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃, an environmental friendly material, was investigated. The catalyst exhibited good catalytic performance in the CWAO of cationic red GTL. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. HO₂· and O₂·⁻ appeared as the main reactive species in the reaction. The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst, a novel environmental-friendly material, was used to investigate the catalytic wet air oxidation (CWAO) of cationic red GTL under mild operating conditions in a batch reactor. The catalyst was prepared by wet impregnation, and characterized by special surface area (BET measurement), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-CeO₂-Bi₂O₃/γ-Al₂O₃ catalyst exhibited good catalytic activity and stability in the CWAO under atmosphere pressure. The effect of the reaction conditions (catalyst loading, degradation temperature, solution concentration and initial solution pH value) was studied. The result showed that the decolorization efficiency of cationic red GTL was improved with increasing the initial solution pH value and the degradation temperature. The apparent activation energy for the reaction was 79 kJ·mol⁻¹. Hydroperoxy radicals (HO₂·) and superoxide radicals (O₂⁻·) appeared as the main reactive species upon the CWAO of cationic red GTL.     

Aggravation of membrane fouling and methane leakage by a three-phase separator in an external anaerobic ceramic membrane bioreactor

The existence of three-phase separator did not affect COD removal in the EAnCMBR. The existence of three-phase separator aggravated methane leakage of EAnCMBR. The existence of three-phase separator aggravated membrane fouling rate of EAnCMBR. Start-up of EAnCMBR equipped three-phase separator was slightly delayed. The three-phase separator is a critical component of high-rate anaerobic bioreactors due to its significant contribution in separation of biomass, wastewater, and biogas. However, its role in an anaerobic membrane bioreactor is still not clear. In this study, the distinction between an external anaerobic ceramic membrane bioreactor (EAnCMBR) unequipped (R1) and equipped (R2) with a three-phase separator was investigated in terms of treatment performance, membrane fouling, extracellular polymers of sludge, and microbial community structure. The results indicate that the COD removal efficiencies of R1 and R2 were 98.2%±0.4% and 98.1%±0.4%, respectively, but the start-up period of R2 was slightly delayed. Moreover, the membrane fouling rate of R2 (0.4 kPa/d) was higher than that of R1 (0.2 kPa/d). Interestingly, the methane leakage from R2 (0.1 L/d) was 20 times higher than that from R1 (0.005 L/d). The results demonstrate that the three-phase separator aggravated the membrane fouling rate and methane leakage in the EAnCMBR. Therefore, this study provides a novel perspective on the effects of a three-phase separator in an EAnCMBR.     

Predicting non-carcinogenic hazard quotients of heavy metals in pepper (Capsicum annum L.) utilizing electromagnetic waves

• There was significant absorption of heavy metals by the pepper in contaminated soils. • The target hazard quotient (THQ) indices followed the order of Pb>Zn>>Cd » Ni. • Relationships exist between contaminated plants and electromagnetic wave. • PCA and random search can select the main spectra and predict THQ for each element. Given the tendency of heavy metals to accumulate in soil and plants, the purpose of this study was to determine the contamination levels of Cd, Ni, Pb, and Zn on peppers (leaves and fruit) grown in contaminated soils in industrial centers. For this purpose, we measured the uptake of the four heavy metals by peppers grown in the heavy metal contaminated soils throughout the four growth stages: two-leaf, growth, flowering, and fruiting, and calculated various vegetation indices to evaluate the heavy metal contamination potentials. Electromagnetic waves were also applied for analyzing the responses of the target plants to various heavy metals. Based on the relevant spectral bands identified by principal component analysis (PCA) and random search methods, a regression method was then employed to determine the most optimal spectral bands for estimating the target hazard quotient (THQ). The THQ was found to be the highest in the plants contaminated by Pb (THQ= 62) and Zn (THQ= 5.07). The results of PCA and random search indicated that the spectra at the bands of b₅₇₀, b₆₅₀, and b₇₆₀ for Pb, b₄₀₀ and b₁₀₃₀ for Ni, b₄₀₀ and b₈₈₀ for Cd, and b₅₆₀, b₉₁₀, and b₁₀₅₀ for Zn were the most optimal spectra for assessing THQ. Therefore, in future studies, instead of examining the amount of heavy metals in plants by chemical analysis in the laboratory, the responses of the plants to the electromagnetic waves in the identified bands can be readily investigated in the field based on the established correlations.     

Degradation of metronidazole by dielectric barrier discharge in an aqueous solution

The discharge characteristics during the degradation of MNZ by DBD were investigated. Increasing the discharge frequency can promote the degradation of MNZ. MNZ removal reaches 99.1% at the initial concentration of 40 ppm within 120 min. Coexisting organic matter inhibits the degradation of MNZ. The energy efficiency of DBD for MNZ removal is higher than other technologies. Degradation of metronidazole (MNZ) which is a representative and stable antibiotic by dielectric barrier discharge (DBD) in an aqueous solution has been studied. Effects of initial MNZ concentration, solution pH and coexisting organics on the degradation were investigated. The results illustrated that increasing the input power and the discharge frequency can improve the removal of MNZ. At low initial concentration, the removal of MNZ can reach up to 99.1%. Acidic and neutral conditions are more favorable for MNZ removal than alkaline condition in the early stage of degradation. However, the difference in MNZ removal between those in acidic or neutral media and that in alkaline one could be neglected with prolonging of the treatment time. Therefore, this method can be applied to MNZ degradation with a wide pH range. Coexisting organic matter in water can attenuate the removal to some extent. This study could provide valuable references for the degradation of nitroimidazole antibiotics by DBD.     

Feasibility assessment of up-flow anaerobic sludge blanket treatment of sulfamethoxazole pharmaceutical wastewater

The UASB system successfully treated sulfamethoxazole pharmaceutical wastewater. High concentration sulfate of this wastewater was the main refractory factor. UASB recovery performance after a few days of inflow arrest was studied. The optimal UASB operating conditions for practical application were determined. Treatment of sulfamethoxazole pharmaceutical wastewater is a big challenge. In this study, a series of anaerobic evaluation tests on pharmaceutical wastewater from different operating units was conducted to evaluate the feasibility of using anaerobic digestion, and the results indicated that the key refractory factor for anaerobic treatment of this wastewater was the high sulfate concentration. A laboratory-scale up-flow anaerobic sludge blanket (UASB) reactor was operated for 195 days to investigate the effects of the influent chemical oxygen demand (COD), organic loading rate (OLR), and COD/SO₄^2? ratio on the biodegradation of sulfamethoxazole in pharmaceutical wastewater and the process performance. The electron flow indicated that methanogenesis was still the dominant reaction although sulfidogenesis was enhanced with a stepwise decrease in the influent COD/SO₄^2? ratio. For the treated sulfamethoxazole pharmaceutical wastewater, a COD of 4983 mg/L (diluted by 50%), OLR of 2.5 kg COD/(m³·d), and COD/SO₄^2? ratio of more than 5 were suitable for practical applications. The recovery performance indicated that the system could resume operation quickly even if production was halted for a few days.