Association between heavy metals and antibiotic-resistant human pathogens in environmental reservoirs: A review

Heavy metals can act as co-selecting agents and promote antibiotic resistance. Most frequent resistances to heavy metals are observed for zinc and cadmium. P. aeruginosa and E. coli are commonly resistant to heavy metals and antibiotics. Heavy metals proliferate antibiotic resistance through co- and cross-resistance. Heavy metal and antibiotic resistances are common near anthropogenic activities. Antibiotic resistance in human pathogens can proliferate under selective pressures. Heavy metals in environmental reservoirs may contribute to selecting antibiotic-resistant strains. To determine the associations between heavy metals and antibiotic resistance, a literature review was conducted to systematically collect and categorize evidence for co-occurrence of resistance to heavy metals and antibiotics within human pathogenic bacteria in water, wastewater, and soil. In total, 42 publications adhered to inclusion criteria. Across the reservoirs, zinc and cadmium were the most commonly observed heavy metals associated with resistance to antibiotics. Pseudomonas aeruginosa and Escherichia coli were the most commonly studied bacteria with reported co-occurrence of resistance to several heavy metals and antibiotic classes. As co-selecting agents, prevalence of heavy metals in the environment can proliferate resistance to heavy metals and antibiotics through co-resistance and cross-resistance mechanisms. In comparing different reservoirs, soils and sediments harbor higher heavy metal and antibiotic resistances compared to water environments. Additionally, abiotic factors such as pH can affect the solubility and hence, the availability of heavy metals to bacterial pathogens. Overall, our review demonstrates heavy metals act as co-selecting agents in the proliferation of antibiotic resistance in human pathogens in multiple environmental reservoirs. More studies that include statistical data are needed to further describe the exposure-response relationships between heavy metals and antibiotic resistance in different environmental media. Moreover, integration of culture-based and molecular-based methods in future studies are recommended to better inform our understanding of bacterial co- and cross-resistance mechanisms to heavy metals and antibiotics.     

Influence of reclaimed water discharge on the dissemination and relationships of sulfonamide,sulfonamide resistance genes along the Chaobai River,Beijing

Reclaimed water threatens the ecological safety of the Chaobai River. SMX, TMP, and SDZ were the first three abundant antibiotics in the research area. SRGs and intI1 were widespread with high abundance after reclaimed water recharge. The SRGs values followed the sequence: Summer>autumn>spring>winter. Strong correlations were detected between SRGs and environmental factors. Reclaimed water represents an important source of antibiotics and antibiotic resistance genes, threatening the ecological safety of receiving environments, while alleviating water resource shortages. This study investigated the dissemination of sulfonamide (SAs), sulfonamide resistance genes (SRGs), and class one integrons (intI1) in the surface water of the recharging area of the Chaobai River. The three antibiotics sulfamethoxazole, trimethoprim, and sulfadiazine had the highest abundance. The highest absolute abundances were 2.91×10⁶, 6.94×10⁶, and 2.18×10⁴ copies/mL for sul1, sul2, and intI1 at the recharge point, respectively. SRGs and intI1 were widespread and had high abundance not only at the recharging point, but also in remote areas up to 8 km away. Seasonal variations of SRGs abundance followed the order of summer>autumn>spring>winter. Significant correlations were found between SRGs and intI1 (R² = 0.887 and 0.786, p<0.01), indicating the potential risk of SRGs dissemination. Strong correlations between the abundance of SRGs and environmental factors were also found, suggesting that appropriate environmental conditions favor the spread of SRGs. The obtained results indicate that recharging with reclaimed water causes dissemination and enrichment of SAs and SRGs in the receiving river. Further research is required for the risk assessment and scientific management of reclaimed water.     

Anaerobic biodegradation of trimethoprim with sulfate as an electron acceptor

Anaerobic biodegradation of trimethoprim (TMP) coupled with sulfate reduction. Demethylation of TMP is the first step in the acclimated microbial consortia. The potential degraders and fermenters were enriched in the acclimated consortia. Activated sludge and river sediment had similar core microbiomes. Trimethoprim (TMP) is an antibiotic frequently detected in various environments. Microorganisms are the main drivers of emerging antibiotic contaminant degradation in the environment. However, the feasibility and stability of the anaerobic biodegradation of TMP with sulfate as an electron acceptor remain poorly understood. Here, TMP-degrading microbial consortia were successfully enriched from municipal activated sludge (AS) and river sediment (RS) as the initial inoculums. The acclimated consortia were capable of transforming TMP through demethylation, and the hydroxyl-substituted demethylated product (4-desmethyl-TMP) was further degraded. The biodegradation of TMP followed a 3-parameter sigmoid kinetic model. The potential degraders (Acetobacterium, Desulfovibrio, Desulfobulbus, and unidentified Peptococcaceae) and fermenters (Lentimicrobium and Petrimonas) were significantly enriched in the acclimated consortia. The AS- and RS-acclimated TMP-degrading consortia had similar core microbiomes. The anaerobic biodegradation of TMP could be coupled with sulfate respiration, which gives new insights into the antibiotic fate in real environments and provides a new route for the bioremediation of antibiotic-contaminated environments.     

Culturomics and metagenomics: In understanding of environmental resistome

State of the art of culturomics and metagenomics to study resistome was presented. The combination of culturomics and metagenomics approaches was proposed. The research directions of antibiotic resistance study has been suggested. Pharmaceutical residues, mainly antibiotics, have been called “emerging contaminants” in the environment because of their increasing frequency of detection in aquatic and terrestrial systems and their sublethal ecological effects. Most of them are undiscovered. Both human and veterinary pharmaceuticals, including antibiotics, are introduced into the environment via many different routes, including discharges from municipal wastewater treatment plants and land application of animal manure and biosolids to fertilize croplands. To gain a comprehensive understanding of the widespread problem of antibiotic resistance, modern and scientific approaches have been developed to gain knowledge of the entire antibiotic-resistant microbiota of various ecosystems, which is called the resistome. In this review, two omics methods, i.e. culturomics, a new approach, and metagenomics, used to study antibiotic resistance in environmental samples, are described. Moreover, we discuss how both omics methods have become core scientific tools to characterize microbiomes or resistomes, study natural communities and discover new microbes and new antibiotic resistance genes from environments. The combination of the method for get better outcome of both culturomics and metagenomics will significantly advance our understanding of the role of microbes and their specific properties in the environment.     

Transport of bacterial cell (E. coli) from different recharge water resources in porous media during simulated artificial groundwater recharge

• The recharge pond dwelling process induced changes in cell properties. • Cell properties and solution chemistry exerted confounding effect on cell transport. • E. coli cells within different recharge water displayed different spreading risks. Commonly used recharge water resources for artificial groundwater recharge (AGR) such as secondary effluent (SE), river water and rainfall, are all oligotrophic, with low ionic strengths and different cationic compositions. The dwelling process in recharge pond imposed physiologic stress on Escherichia coli (E. coli) cells, in all three types of investigated recharge water resources and the cultivation of E. coli under varying recharge water conditions, induced changes in cell properties. During adaptation to the recharge water environment, the zeta potential of cells became more negative, the hydrodynamic diameters, extracellular polymeric substances content and surface hydrophobicity decreased, while the cellular outer membrane protein profiles became more diverse. The mobility of cells altered in accordance with changes in these cell properties. The E. coli cells in rainfall recharge water displayed the highest mobility (least retention), followed by cells in river water and finally SE cells, which had the lowest mobility. Simulated column experiments and quantitative modeling confirmed that the cellular properties, driven by the physiologic state of cells in different recharge water matrices and the solution chemistry, exerted synergistic effects on cell transport behavior. The findings of this study contribute to an improved understanding of E. coli transport in actual AGR scenarios and prediction of spreading risk in different recharge water sources.     

Influence of hydraulic retention time on behavior of antibiotics and antibiotic resistance genes in aerobic granular reactor treating biogas slurry

Longer HRT can enhance degradation rate of sulfamethoxazole in granular reactor. Longer HRT can reduce accumulated concentrations of TCs and QNs in sludge. Longer HRT may have increased relative abundances of ARGs in aerobic granules. The behavior of antibiotics and the corresponding resistance genes in aerobic granular reactors for treating biogas slurry under different hydraulic retention times (10.7 h, R1; 8 h, R2) was investigated in this study. The results indicated that the hydraulic retention time could affect the effluent concentrations and removal efficiencies of sulfonamides. The average removal rates of tetracyclines, fluoroquinolones, and sulfonamides were 63%, 46%, and 90% in R1, and 62%, 46%, and 86% in R2, respectively. Although the removal efficiencies of tetracyclines and fluoroquinolones were similar in both reactors, the respective accumulated concentrations of tetracyclines and fluoroquinolones in R1 were 7.00 and 11.15 µg/g SS, which were lower than those in R2 (8.92 and 13.37 µg/g SS, respectively). The difference in the relative abundance of target antibiotic resistance genes between both reactors was not significant, yet the average relative abundances of all target resistance genes in R1 were higher than those in R2 after 45 days of operation. The results of this study suggested that a longer hydraulic retention time could enhance the antibiotic removal ability of aerobic granular sludge, yet it may also increase the risk of surplus sludge utilization from a resistance genes point of view.     

Distribution and removal of antibiotic resistance genes during anaerobic sludge digestion with alkaline,thermal hydrolysis and ultrasonic pretreatments

Sludge digestion is critical to control the spread of ARGs from wastewater to soil. Fate of ARGs in three pretreatment-AD processes was investigated. UP was more efficient for ARGs removal than AP and THP in pretreatment-AD process. The total ARGs concentration showed significant correlation with 16S rRNA gene. The bacteria carrying ARGs could be mainly affiliated with Proteobacteria. Sewage sludge in the wastewater treatment plants contains considerable amount of antibiotic resistance genes (ARGs). A few studies have reported that anaerobic digestion (AD) could successfully remove some ARGs from sewage sludge, but information on the fate of ARGs in sludge pretreatment-AD process is still very limited. In this study, three sludge pretreatment methods, including alkaline, thermal hydrolysis and ultrasonic pretreatments, were compared to investigate the distribution and removal of ARGs in the sludge pretreatment-AD process. Results showed that the ARGs removal efficiency of AD itself was approximately 50.77%, and if these three sludge pretreatments were applied, the total ARGs removal efficiency of the whole pretreatment-AD process could be improved up to 52.50%–75.07%. The ultrasonic pretreatment was more efficient than alkaline and thermal hydrolysis pretreatments. Although thermal hydrolysis reduced ARGs obviously, the total ARGs rebounded considerably after inoculation and were only removed slightly in the subsequent AD process. Furthermore, it was found that the total ARGs concentration significantly correlated with the amount of 16S rRNA gene during the pretreatment and AD processes, and the bacteria carrying ARGs could be mainly affiliated with Proteobacteria.     

Occurrence of veterinary antibiotics in struvite recovery from swine wastewater by using a fluidized bed

Antibiotics in wastewater pose pharmacological threats to phosphorous recovery. Recovered struvite particles possessed significantly antibiotic residues. Smaller granules contained much more antibiotics than the larger ones. Organic matters and struvite granulation process exerted significant impacts. Recovering phosphorus from livestock wastewater has gained extensive attention. The residue of veterinary antibiotics in the wastewater may be present in the recovered products, thereby posing pharmacological threats to the agricultural planting and human health. This study investigated antibiotic occurrence in the struvite particles recovered from swine wastewater by using a fluidized bed. Results revealed that tetracyclines possessed significant residues in the struvite granules, with the values ranging from 195.2 mg·kg⁻¹ to 1995.0 mg·kg⁻¹. As for fluoroquinolones, their concentrations varied from 0.4 mg·kg⁻¹ to 1104.0 mg·kg⁻¹. Struvite particles were of various sizes and shapes and displayed different antibiotic adsorption capacities. The data also showed that the smaller granules contained much more antibiotics than the larger ones, indicating that the fluidized granulation process of struvite crystals plays an important role on the accumulation of antibiotics. For tetracyclines, organic matters and struvite adsorption exerted significant impacts on tetracyclines migration. The outcomes underscore the need to consider the residues of antibiotics in resource recovery from wastewater because they exert pharmacological impacts on the utilization of recovered products.     

Characteristics of two transferable aminoglycoside resistance plasmids in Escherichia coli isolated from pig and chicken manure

pRKZ3 is a non-conjugative IncQ plasmid, while pKANJ7 is a conjugative IncX plasmid. The optimal mating time of pKANJ7 varied under different conditions. Both of the two transferable ARPs had little impact on the growth of their hosts. A relatively high level of fitness cost was observed for pKANJ7. The fitness cost of ARPs depended on their hosts. Plasmid-mediated antibiotic resistance genes (ARGs) have recently become a more prominent concern in the global environment. However, the prevalence of aminoglycoside resistance plasmids in the livestock industry is under reported. In this study, two transferable aminoglycoside resistance plasmids, pRKZ3 and pKANJ7, isolated from pig and chicken manure, were characterized. Results showed that pRKZ3 (8236 bp) is a non-conjugative IncQ plasmid and contains genes encoding for plasmid replication and stabilization (repA, repB and repC), mobilization (mob), and antibiotic resistance (arr-3 and aacA). pKANJ7 (30142 bp) is a conjugative IncX plasmid which codes for a type IV secretion system (T4SS). Conjugative transfer experiments showed that the optimal mating time of pKANJ7 was 8 h under the starvation condition, but the number of tranconjugants increased with time under the nutrient condition. Statistical analysis indicated that the two plasmids had little impact on the growth of their hosts, but a relatively high level of fitness cost due to pKANJ7 was observed. We also found that the fitness cost of plasmids depended on their hosts. Compared with pKANJ7, the relative fitness cost index of pRKZ3 varied within a narrow range during the 10 days of competition. The low level of fitness cost of pRKZ3 might contribute to the persistence of the plasmid in the environment. Our study provides new information for understanding the characterizations of antibiotic resistance plasmids (ARPs) in manure sources and helps to clarify the transfer and persistence of ARPs in the environment following the application of manure.     

Influences and mechanisms of nanofullerene on the horizontal transfer of plasmid-encoded antibiotic resistance genes between E. coli strains

• Sub-inhibitory levels of nC₆₀ promote conjugative transfer of ARGs. • nC₆₀ can induce ROS generation, oxidative stress and SOS response. • nC₆₀ can increase cell membrane permeability and alter gene expression. • Results provide evidence of nC₆₀ promoting antibiotic resistance dissemination. The spread and development of antibiotic resistance globally have led to severe public health problems. It has been shown that some non-antibiotic substances can also promote the diffusion and spread of antibiotic resistance genes (ARGs). Nanofullerene (nC₆₀) is a type of nanomaterial widely used around the world, and some studies have discovered both the biological toxicity and environmental toxicity of nC₆₀. In this study, cellular and molecular biology techniques were employed to investigate the influences of nC₆₀ at sub-minimum inhibitory concentrations (sub-MICs) on the conjugation of ARGs between the E. coli strains. Compared with the control group, nC₆₀ significantly increased the conjugation rates of ARGs by 1.32‒10.82 folds within the concentration range of 7.03‒1800 mg/L. This study further explored the mechanism of this phenomenon, finding that sub-MICs of nC₆₀ could induce the production of reactive oxygen species (ROS), trigger SOS-response and oxidative stress, affect the expression of outer membrane proteins (OMPs) genes, increase membrane permeability, and thus promote the occurrence of conjugation. This research enriches our understanding of the environmental toxicity of nC₆₀, raises our risk awareness toward nC₆₀, and may promote the more rational employment of nC₆₀ materials.     

Statistical modeling of radiolytic (60Co g) degradation of Ofloxacin,antibiotic: Synergetic effect,kinetic studies & assessment of its degraded metabolites

Linear, interactive and quadratic effects of process parameters were studied. Degradation of Ofloxacin (Ofx) was related with G value of irradiation process. The synergistic effect of H₂O₂ on lower dose of g-irradiation was established. The process follows pseudo first order with dose constant (d = 0.232 kGy^–1). The impact of human activities in the past few decades has paved the way for the release of pollutants due to the improper effluent treatment. Recent studies revealed that, Ofloxacin, an antibiotic as one of the major pollutant affecting surface water and ground water. In this study, the radiolytic potential of Ofloxacin was investigated. The effects of pH, dose and concentration of Ofloxacin were analyzed using One Factor At a Time (OFAT) and the interactive effects between the parameters were studied using Face Centered Central Composite Design. The statistically optimised developed model shows 30% degradation at initial antibiotic concentration of 1mM at pH 3.0 and at 2 kGy dose of gamma ray. The process efficiency was evaluated in terms of G value and its correlation with the concentration of antibiotic was also established. The process of degradation was augmented by the addition of H₂O₂ (1.5 mM). The reaction kinetics for the process was evaluated, the dose rate constant and the rate of degradation for the augmented process was found to be 0.232 kGy^-1 and 0.232 mM/kGy, respectively. The degraded metabolites of the radiolytic degradation of Ofloxacin were analyzed through change in pH, reduction in TOC and GC-MS spectrum.     

Water-dispersible nano-pollutions reshape microbial metabolism in type-specific manners: A metabolic and bacteriological investigation in Escherichia coli

• Water-dispersible nano-pollutions exhibit type-specific toxic effects on E. coli. • Global metabolite profiling was used to characterize metabolic disruption patterns. • Key dysregulated metabolites responsive to nano-pollution exposures were found. • Amino acid metabolism and purine metabolism are perturbed at nano-pollutions. Incomplete separation and recycling of nanoparticles are causing undesirable nanopollution and thus raising great concerns with regard to nanosafety. Since microorganisms are important regulator of physiological processes in many organisms, the interaction between nanopollution and microbial metabolomics and the resultant impact on the host’s health are important but unclear. To investigate how typical nanopollution perturbs microbial growth and metabolism, Escherichia coli (E. coli) in vitro was treated with six water-dispersible nanomaterials (nanoplastic, nanosilver, nano-TiO₂, nano-ZnO, semiconductor quantum dots (QDs), carbon dots (CDs)) at human-/environment-relevant concentration levels. The nanomaterials exhibited type-specific toxic effects on E. coli growth. Global metabolite profiling was used to characterize metabolic disruption patterns in the model microorganism exposed to different nanopollutants. The percentage of significant metabolites (p<0.05, VIP>1) accounted for 6%–38% of the total 293 identified metabolites in each of the nanomaterial-contaminated bacterial groups. Metabolic results also exhibited significant differences between different nanopollutants and dose levels, revealing type-specific and untypical concentration-dependent metabolic responses. Key metabolites responsive to nanopollution exposures were mainly involved in amino acid and purine metabolisms, where 5, 4, and 7 significant metabolic features were included in arginine and proline metabolism, phenylalanine metabolism, and purine metabolism, respectively. In conclusion, this study horizontally compared and demonstrated how typical nanopollution perturbs microbial growth and metabolomics in a type-specific manner, which broadens our understanding of the ecotoxicity of nanopollutants on microorganisms.     

Degradation of metronidazole by dielectric barrier discharge in an aqueous solution

The discharge characteristics during the degradation of MNZ by DBD were investigated. Increasing the discharge frequency can promote the degradation of MNZ. MNZ removal reaches 99.1% at the initial concentration of 40 ppm within 120 min. Coexisting organic matter inhibits the degradation of MNZ. The energy efficiency of DBD for MNZ removal is higher than other technologies. Degradation of metronidazole (MNZ) which is a representative and stable antibiotic by dielectric barrier discharge (DBD) in an aqueous solution has been studied. Effects of initial MNZ concentration, solution pH and coexisting organics on the degradation were investigated. The results illustrated that increasing the input power and the discharge frequency can improve the removal of MNZ. At low initial concentration, the removal of MNZ can reach up to 99.1%. Acidic and neutral conditions are more favorable for MNZ removal than alkaline condition in the early stage of degradation. However, the difference in MNZ removal between those in acidic or neutral media and that in alkaline one could be neglected with prolonging of the treatment time. Therefore, this method can be applied to MNZ degradation with a wide pH range. Coexisting organic matter in water can attenuate the removal to some extent. This study could provide valuable references for the degradation of nitroimidazole antibiotics by DBD.     

Characterization of CANON reactor performance and microbial community shifts with elevated COD/N ratios under a continuous aeration mode

COD/N at low ratios (0–0.82) improved N removals of CANON. CANON performance decreased after COD/N up to 0.82. The relative abundance of AOB decreased continuously with increasing COD/N. AOB outcompeted at a high COD load led to CANON failure. The relative abundance of AnAOB decreased and increased with increasing COD/N. The effects of increasing COD/N on nitrogen removal performance and microbial structure were investigated in a SBR adopting a completely autotrophic nitrogen removal over nitrite process with a continuous aeration mode (DO at approximately 0.15–0.2 mg/L). As the COD/N increased from 0.1 to≤0.59, the nitrogen removal efficiency (NRE) increased from 88.7% to 95.5%; while at COD/N ratios of 0.59–0.82, the NRE remained at 90.7%–95.5%. As the COD/N increased from 0.82 to 1.07, the NRE decreased continuously until reaching 60.1%. Nitrosomonas sp. (AOB) and Candidatus Jettenia (anammox bacteria) were the main functional genera in the SBR. As the COD/N increased from 0.10 to 1.07, the relative abundance of Nitrosomonas decreased from 13.4% to 2.0%, while that of Candidatus Jettenia decreased from 35% to 9.9% with COD/N<0.82 then increased to 45.4% at a COD/N of 1.07. Aerobic heterotrophic bacteria outcompeted AOB at high COD loadings (650 mg/L) because of oxygen competition, which ultimately led to deteriorated nitrogen removal performance.     

Comparison of CNT-PVA membrane and commercial polymeric membranes in treatment of emulsified oily wastewater

CNT-PVA membrane was fabricated and compared with polymeric membranes. The separation performance was evaluated by homemade and cutting fluid emulsions. The three membranes show similar oil retention rates. CNT-PVA membranes have higher permeation fluxes compared with polymeric membranes. CNT-PVA membrane shows higher fouling resistance. Membrane separation is an attractive technique for removal of emulsified oily wastewater. However, polymeric membranes which dominate the current market usually suffer from severe membrane fouling. Therefore, membranes with high fouling resistance are imperative to treat emulsified oily wastewater. In this study, carbon nanotube-polyvinyl alcohol (CNT-PVA) membrane was fabricated. And its separation performance for emulsified oily wastewater was compared with two commercial polymeric membranes (PVDF membrane and PES membrane) by filtration of two homemade emulsions and one cutting fluid emulsion. The results show that these membranes have similar oil retention efficiencies for the three emulsions. Whereas, the permeation flux of CNT-PVA membrane is 1.60 to 3.09 times of PVDF membrane and 1.41 to 11.4 times of PES membrane, respectively. Moreover, after five consecutive operation circles of filtration process and back flush, CNT-PVA membrane can recover 62.3% to 72.9% of its initial pure water flux. However, the pure water flux recovery rates are only 24.1% to 35.3% for PVDF membrane and 6.0% to 26.3% for PES membrane, respectively. Therefore, CNT-PVA membrane are more resistant to oil fouling compared with the two polymeric membranes, showing superior potential in treatment of emulsified oily wastewater.     

Anaerobic phenanthrene biodegradation with four kinds of electron acceptors enriched from the same mixed inoculum and exploration of metabolic pathways

Anaerobic phenanthrene biodegradation enriched process was described in detail. The enriched bacterial communities were characterized under four redox conditions. The enriched archaeal communities were stated under high percentage conditions. Relatively intact pathways of anaerobic phenanthrene biodegradation were proposed. Polycyclic aromatic hydrocarbons (PAHs) are widespread and persistent contaminants worldwide, especially in environments devoid of molecular oxygen. For lack of molecular oxygen, researchers enhanced anaerobic zones PAHs biodegradation by adding sulfate, bicarbonate, nitrate, and iron. However, microbial community reports of them were limited, and information of metabolites was poor except two-ring PAH, naphthalene. Here, we reported on four phenanthrene-degrading enrichment cultures with sulfate, bicarbonate, nitrate, and iron as electron acceptors from the same initial inoculum. The high-to-low order of the anaerobic phenanthrene biodegradation rate was the nitrate-reducing conditions>sulfate-reducing conditions>methanogenic conditions>iron-reducing conditions. The dominant bacteria populations were Desulfobacteraceae, Anaerolinaceae, and Thermodesulfobiaceae under sulfate-reducing conditions; Moraxellaceae, Clostridiaceae, and Comamonadaceae under methanogenic conditions; Rhodobacteraceae, Planococcaceae, and Xanthomonadaceae under nitrate-reducing conditions; and Geobacteraceae, Carnobacteriaceae, and Anaerolinaceae under iron-reducing conditions, respectively. Principal component analysis (PCA) indicated that bacteria populations of longtime enriched cultures with four electron acceptors all obtained significant changes from original inoculum, and bacterial communities were similar under nitrate-reducing and iron-reducing conditions. Archaea accounted for a high percentage under iron-reducing and methanogenic conditions, and Methanosarcinaceae and Methanobacteriaceae, as well as Methanobacteriaceae, were the dominant archaea populations under iron-reducing and methanogenic conditions. The key steps of phenanthrene biodegradation under four reducing conditions were carboxylation, further ring system reduction, and ring cleavage.     

Simultaneous removal of hydrogen sulfide and volatile organic sulfur compounds in off-gas mixture from a wastewater treatment plant using a two-stage bio-trickling filter system

A two-stage BTF system was established treating odorous off-gas mixture from a WWTP. The two-stage BTF system showed resistance for the lifting load of H₂S and VOSC. Miseq Illumina sequencing showed separated functional microbial community in BTFs. Avoiding H₂S inhibition and enhancement of VOSC degradation was achieved. Key control point was discussed to help industrial application of the system. Simultaneous removal of hydrogen sulfide (H₂S) and volatile organic sulfur compounds (VOSCs) in off-gas mixture from a wastewater treatment plant (WWTP) is difficult due to the occasional inhibitory effects of H₂S on VOSC degradation. In this study, a two-stage bio-trickling filter (BTF) system was developed to treat off-gas mixture from a real WWTP facility. At an empty bed retention time of 40 s, removal efficiencies of H₂S, methanethiol, dimethyl sulfide, and dimethyl disulfide were 90.1, 88.4, 85.8, and 61.8%, respectively. Furthermore, the effect of lifting load shock on system performance was investigated and results indicated that removal of both H₂S and VOSCs was slightly affected. Illumina Miseq sequencing revealed that the microbial community of first-stage BTF contained high abundance of H₂S-affinity genera including Acidithiobacillus (51.43%), Metallibacterium (25.35%), and Thionomas (8.08%). Analysis of mechanism demonstrated that first stage of BTF removed 86.1% of H₂S, mitigating the suppression on VOSC degradation in second stage of BTF. Overall, the two-stage BTF system, an innovative bioprocess, can simultaneously remove H₂S and VOSC.     

A review on anammox process for the treatment of antibiotic-containing wastewater: Linking effects with corresponding mechanisms

• Anammox is promising for nitrogen removal from antibiotic-containing wastewater. • Most antibiotics could inhibit the anammox performance and activity. • Antibiotic pressure promoted the increase in antibiotic resistance genes (ARGs). • Antibiotic-resistance mechanisms of anammox bacteria are speculated. Antibiotic is widely present in the effluent from livestock husbandry and the pharmaceutical industry. Antibiotics in wastewater usually have high biological toxicity and even promote the occurrence and transmission of antibiotic resistant bacteria and antibiotic resistance genes. Moreover, most antibiotic-containing wastewater contains high concentration of ammonia nitrogen. Improper treatment will lead to high risk to the surrounding environment and even human health. The anaerobic ammonium oxidation (anammox) with great economic benefit and good treatment effect is a promising process to remove nitrogen from antibiotic-containing wastewater. However, antibiotic inhibition has been observed in anammox applications. Therefore, a comprehensive overview of the single and combined effects of various antibiotics on the anammox system is conducted in this review with a focus on nitrogen removal performance, sludge properties, microbial community, antibiotic resistance genes and anammox-involved functional genes. Additionally, the influencing mechanism of antibiotics on anammox consortia is summarized. Remaining problems and future research needs are also proposed based on the presented summary. This review provides a better understanding of the influences of antibiotics on anammox and offers a direction to remove nitrogen from antibiotic-containing wastewater by the anammox process.     

Attached cultivation of Scenedesmus sp. LX1 on selected solids and the effect of surface properties on attachment

Attachment of Scenedesmus sp. LX1 was tested on certain materials. A criterion for selection of materials was used to choose seven materials. The amount of S. sp. LX1 attached on polyurethane foam was 51.74 mg/L. Materials’ surface influenced the attachment of microalgae. Hydrophilic and hydrophobic properties also affected the attachment of S. sp. LX1. Attached cultivation systems in the literature do not present a methodology to screen materials for microalgal growth. Hence, a method is needed to find suitable materials for attached cultivation that may enhance attachment of microalgae. In this paper, we have tested seven materials culturing Scenedesmus sp. LX1 (S. sp. LX1) to evaluate the attachment of microalgae on the material surface, its growth in suspension phase and the properties of the materials. Two materials showed attachment of S. sp. LX1, polyurethane foam and loofah sponge, and allowed microalgae to grow both in the surface of the material and suspended phase. Polyurethane foam proved to be a good material for attachment of S. sp. LX1 and the amount of attached microalgae obtained was 51.73 mg/L when adding 100 pieces/L. SEM images showed that the surface and the pore size of the materials affected the attachment of the microalgae, increasing its attachment in scaffold-like materials. Furthermore, the hydrophilic and hydrophobic properties of the materials also affected the attachment of microalgae. This research can be used as a methodology to search for the assessment of a material suitable for attachment of microalgae.     

Effect of 2-butenal manufacture wastewater to methanogenic activity and microbial community

The inhibition ratio sharply increased with the increasing COD. The absorbance of UV-vis at 420 nm showed a linear correlation with the SMA. The molecular structure of EPS has changed when COD was 9585 mg/L. Illumina Miseq sequencing was employed to reveal the microbial composition. The synthesis of 2-butenal, which is a vital raw material for the production of sorbic acid as a food preservative, generates some toxic by-products, so it is urgent to seek better detoxification strategies for the treatment of 2-butenal manufacture wastewater. In this study, batch experiments were carried out to investigate the inhibition effect of wastewater on the methanogenic activity. To understand the wastewater toxicity to anaerobic granular sludge, variations of the specific methanogenic activity (SMA) and extracellular polymeric substance (EPS) constituents at various wastewater CODs were investigated. Ultraviolet-visible (UV-vis) spectra and Fourier transform infrared (FT-IR) spectra were employed to analyze the structure of the EPS. The results showed that the inhibitory ratio of 2-butenal manufacture wastewater was less than 8.4% on the anaerobic granular sludge when the CODs were less than 959 mg/L. However, the inhibitory ratio increased from 36.4% to 93.6% when CODs increased from 2396 mg/L to 9585 mg/L, with the SMA decreasing from 39.1 mL CH₄/(gVSS·d) to 3.2 mL CH₄/(gVSS·d). The diversity of the microbial community under various CODs was researched by Illumina 16S rRNA Miseq sequencing and the results demonstrated that Proteiniphilum、Petrimonas and Syntrophobacter were the dominant bacteria genera in all sample. Regarding archaea, Methanobacterium was the most dominated archaea genera, followed by the Methanosaeta group in all samples. Moreover, the bacterial communities had changed obviously with increasing CODs, which indicated high CODs played a negative impact on the richness and diversity of bacterial community in the sludge samples.