Polychlorinated dibenzo-p-dioxin (PCDD) and dibenzofuran (PCDF) isomer patterns from municipal waste combustion: formation mechanism fingerprints

Polychlorinated dibenzo-p-dioxin (PCDD) and dibenzofuran (PCDF) byproducts can be formed in combustion systems by a variety of mechanisms. While total PCDD/F emissions and, to a lesser extent, homologue distributions from incinerators have been found to vary widely depending on combustion conditions, PCDD/F isomer distributions do not. Formation mechanisms can be grouped into two general categories: condensation of precursors, such as chlorinated phenols, and formation from particulate carbon, termed de novo synthesis. In addition to these mechanisms, chlorination and dechlorination reactions may affect isomer patterns. In this work, isomer patterns from field and laboratory municipal waste combustion samples are compared with computed thermodynamic distributions and those from the following experimental investigations: both gas-phase and metal-catalyzed condensation of chlorinated phenols, chlorination of dibenzo-p-dioxin and dibenzofuran, and dechlorination of octachlorodibenzo-p-dioxin and octachlorodibenzofuran. PCDD/F isomer patterns produced by different formation mechanisms in controlled experiments are distinct and robust, largely unaffected by combustion conditions. PCDD isomer patterns from municipal waste combustion are most similar to those produced by CuCl(2)-catalyzed phenol condensation from 10 chlorinated phenols. PCDF isomer patterns are most similar to those produced by chlorination and dechlorination.     

Prediction of polychlorinated dibenzofuran congener distribution from gas-phase phenol condensation pathways

A model for predicting the distribution of dibenzofuran and polychlorinated dibenzofuran (PCDF) congeners from a distribution of phenols was developed. The model is based on a simplified chemical mechanism. Relative rate constants and reaction order with respect to phenol precursors were derived from experimental results using single phenols and equal molar mixtures of up to four phenols. For validation, experiments were performed at three temperatures using a distribution of phenol and 19 chlorinated phenols as measured in municipal waste incinerator exhaust gas. Comparison of experimental measurements and model predictions for PCDF isomer distributions and homologue pattern shows agreement within measurement uncertainty. The R-squared correlation coefficient exceeds 0.9 for all PCDF isomer distributions and the distribution of PCDF homologues. These results demonstrate that the distribution of dibenzofuran and the 135 PCDF congeners from gas-phase condensation of phenol and chlorinated phenols can be predicted from measurement of the distribution of phenol and the 19 chlorinated phenol congeners.     

Historical trends of PCDD/Fs and dioxin-like PCBs in sediments buried in a reservoir in Northern Taiwan

Polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF) and polychlorinated biphenyl (PCB) concentrations were analyzed at 1-2cm intervals in a sediment core collected from a reservoir in Northern Taiwan to evaluate the organic pollution history. The highest PCDD/F (14.4ng TEQ/kg d.w.) and PCB (0.261ng TEQ(WHO)/kg d.w.) concentrations were determined at 13-15cm (estimated year: 1992). The ages of the levels of sediment core were estimated from the sedimentation rate. Analysis results demonstrate that the PCDD/F concentration of the sediment core measured in the reservoir reached their peak when the municipal waste incinerators (MWIs) in the area started to operate. Furthermore, the decrease in sediment core PCDD/F concentration is related to the time of enforcement of the PCDD/F emission limit set by the Environmental Protection Administration (EPA) in Taiwan. Significant distribution of OCDD in homologue profiles was noted in archived soil samples in Taiwan in which the major input of PCDD/Fs was thought to be atmospheric. Major PCB congeners found in the sediment core were the major components of the commercial PCB products. Input fluxes of PCDD/Fs (5.75-158ng-I-TEQ/m(2)-yr) and PCBs (0.248-3.71ng TEQ(WHO)/m(2)yr) into the reservoir of interest are also calculated from the concentration and sedimentation rate of the sediment. The results reveal that considerable amounts of PCDD/Fs and PCBs were carried into the reservoir of interest in the flood stage but not during normal stage.     

Changes in PCDD/PCDF formation processes during instationary phases of combustor operation--exemplified by the use of Cl4DD isomer patterns

In this paper results of various measurement campaigns at different municipal waste incineration (MWI) plants concerning the change of the PCDD/PCDF isomer distribution in the crude gas during transiently impaired combustion conditions are presented. The focus is on the Cl4DD isomer distributions exemplarily for all other homologue groups to demonstrate the change in PCDD/PCDF formation mechanism at transient combustion conditions. Additionally to crude gas samples, at one plant filter and boiler ash were investigated simultaneously to determine if there is any difference in the isomer distribution between the matrices. For the ash from an electrostatic precipitator (ESP ash), the boiler ash and the corresponding crude gas sample, nearly identical changes in the Cl4DD isomer distribution under transient combustion conditions in relation to the normal operation process could be detected. By comparing the Cl4DD isomer distributions from different incineration plants (two municipal waste incinerators and one little incinerator burning wood chips for heating domestic household) under transient combustion conditions, in all cases the 1,3,6,8- and 1,3,7,9-Cl4DD were dominating the isomer distribution, whereas under normal operation other isomers were predominant. Obviously PCDD/PCDF formation mechanisms under transient combustion conditions are independent from the type of incinerator and of the burned fuel, respectively. Data sets were analyzed with respect to the possible reaction mechanism via chlorophenols and a good correlation of 2,4,6-trichlorophenol during the second phase of a start-up process and during a CO experiment was found. To get more detailed information about possible formation mechanisms, at one plant the dependence of the PCDD/PCDF isomer distribution on the different matrices was studied. Separate analysis of fly ash collected at the boiler exit, subsequent gas phase, ESP ash and boiler ash under normal operation conditions showed that, apart from the fly ash, the Cl4DD isomer distributions are nearly the same in the different matrices. Surprisingly, the Cl4DD isomer distribution of the fly ash was more similar to the distributions found under transient combustion conditions.     

Correlation of polychlorinated naphthalenes with polychlorinated dibenzofurans formed from waste incineration

Isomer composition of polychlorinated naphthalenes (PCNs) was measured for municipal waste incinerator fly ash samples and for emission samples produced from soot and copper-deposit experiments conducted at the United States Environmental Protection Agency (US-EPA). Two types of PCN isomer patterns were identified. One pattern contained specific PCN isomers in which chlorine atoms are substituted as if the peri(alpha-) position were dechlorinated from the higher chlorinated PCNs one by one. In another pattern, the isomers had a tendency for the chlorine atoms to assume successive positions on the naphthalene ring, which may be caused by specifically oriented chlorination. Some of these isomers increased, together with several polychlorinated dibenzofuran (PCDF) and a few polychlorinated dibenzo-p-dioxin (PCDD) isomers. The ratios between some specific PCN, PCDF, and PCDD isomers measured for the fly ash samples agree with those obtained from the soot and copper-deposit experiments. The observations suggest that these isomers were formed possibly from de novo synthesis utilizing the carbon structure contained in soot under the catalytic effect of a copper compound. Typical isomers for PCNs and PCDFs produced from incineration emissions were identified.     

Formation of PCDD/Fs from oxidation of 2-monochlorophenol over an Fe2O3/silica surface

The role of iron in surface-mediated formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from 2-chlorophenol (2-MCP) was investigated over the temperature range of 200-550 °C under oxidative conditions. In order to compare and contrast with previous work on copper and ferric oxide-mediated pyrolysis of 2-MCP, identical reaction conditions were maintained (50 ppm 2-MCP, model fly-ash particles containing 5% Fe₂O₃ on silica). Observed products included dibenzo-p-dioxin (DD), 1-monochlorodibenzo-p-dioxin (1-MCDD), dibenzofuran (DF), 4,6-dichlorodibenzofuran (4,6-DCDF), 2,4- and 2,6-dichlorophenol, 2,4,6-trichlorophenol, quinone, catechol, chloro-o-quinone, chlorocatechol and polychlorinated benzenes. Yields of DD and 1-MCDD were 2 and 5 times higher than under pyolysis conditions, respectively. Although 4,6-DCDF was the major PCDD/F product formed with a yield that was 2.5× greater than under pyrolysis, the yield of non-chlorinated DF, which was the dominant PCDD/F product under pyrolysis, decreased by a factor of 3. Furthermore, the ∼2× higher yield of PCDDs under oxidative conditions resulted in a PCDD to PCDF ratio of 0.75 compared to a relatively low ratio of 0.39 previously observed under pyrolytic conditions.     

Matrix effects on the de novo synthesis of polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls and benzenes

The formation of polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls and benzenes in de novo synthesis experiments have been studied on model fly ashes with a wide range of matrices. The model fly ash consisted of 18 selected matrices with the addition of CuCl(2) x 2H(2)O, activated charcoal and NaCl. The studied matrices were not restricted to the commonly investigated matrices with defined chemical composition (silica gel, alumina, florisil) and industrially produced adsorbents with silicate structures (diatomaceous earths), but also included natural occurring matrices (clays, kaolin, bentonite and feldspars). In addition fly ashes from a hazardous waste incinerator were included in the study for comparison. Differences in the isomer composition (homologue profiles and isomer patterns) of the substances formed by de novo synthesis experiments are discussed in dependence on the chemical composition of the studied matrices. The de novo synthesis experiments on matrices with silicate structures resulted in high concentration of mainly perchlorinated aromatic compounds while for other matrices in particular alkaline matrices a homologue shift to lower chlorinated homologues and lower formation rates were found. The paper discusses the resulting PCDD/PCDF pattern and compares them to the PCDD/PCDF profile found in naturally occurring kaolin and ball clay (illite).     

Mechanistic studies on the role of PAHs and related compounds in PCDD/F formation on model fly ashes

Model fly ashes containing Florisil, CuCl2.2H2O and PAHs with structures similar to dibenzo-p-dioxin or dibenzofuran were heated at 250 degrees C in He/O2 with regard to a supposed intramolecular reaction mechanism for oxygen incorporation. Highest reactivities in PCDF formation could be found for model compounds containing a biphenyl structure, while condensed pi-systems lead to a decrease in reactivity for such compounds. Biphenyl is almost completely converted to dibenzofuran. PCDD formation from six-membered rings like xanthene/9,10-dihydroanthracene is of minor importance. 18O-labeling of gaseous oxygen reveals no common reaction step for oxygen incorporation using 9-fluorenone, xanthene, diphenyl ether and diphenyl-2-carboxylic acid as model compounds. Pre-existing oxygen in reactants is a major source for ether groups in PCDD and PCDF. Determination of labeled and unlabeled CO and CO2 besides He/O2 reflects higher reactivities towards oxidation for model compounds containing ether groups than for compounds with carbonyl groups.     

PCDD/PCDF formation in the chlor-alkali process—laboratory study and comparison with patterns from contaminated sites

Studies on the formation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) during the electrolysis of sodium chloride solution (brine) using graphite or titanium electrodes were carried out at a laboratory scale. High concentrations of PCDFs but no PCDDs were formed in tests using graphite electrodes. With titanium electrodes, PCDFs were only formed when tar pitch was added and mainly originated from the dibenzofuran present in the tar. For the first time, a detailed assessment of the formation of mono- to octachlorinated PCDD/PCDF from tar pitch was investigated. The assessment included of the chlorination steps proved that PCDFs were formed by successive lateral chlorinated from dibenzofuran to MonoCDFs, DiCDFs, and TriCDFs to form the typical known “chlorine pattern” of TetraCDF to OctaCDF with a dominance of 1,2,7,8- and 2,3,7,8-TetraCDFs, 1,2,3,7,8-PentaCDF, and 1,2,3,4,7,8-HexaCDF as marker congeners. The final homologue distributions depended on reaction time and reaction temperature. In addition, electrolysis with non-chlorinated dibenzo-p-dioxins, dibenzofuran, and biphenyl was carried out. As a result, PCDDs, PCDFs, and PCB were formed at comparable yields. Congener patterns in soil samples from a PCDD/F-contaminated site where chlor-alkali electrolysis had been operated for decades in Japan had identical isomer distribution demonstrating the source and contamination potential and risk of these processes. Therefore, sites where in the past 120 years chlor-alkali electrolysis has been operated or where residues from chlor-alkali production or other chlorine using industries have been disposed should be assessed for their pollution level and exposure relevance. The assessment of total organohalogen content revealed that PCDF is only a small fraction of organohalogens in the contaminated soils. For an appropriate risk assessment, also other chlorinated aromatic compounds such as PCBs or PCNs need to be considered.     

Formation of PCDF, PCDD, PCB, and PCN in de novo synthesis from PAH: mechanistic aspects and correlation to fluidized bed incinerators

The difference of polychlorinated dibenzofurans (PCDF) isomer patterns between stoker type incinerators and some fluidized bed incinerators (FBI) is a key to understand the formation mechanisms in both types of incinerators. The total yield and the isomer patterns of PCDF, polychlorinated biphenyls (PCB), polychlorinated naphthalenes (PCN), and polychlorinated benzenes (PCBz) formed via de novo synthesis from polycyclic aromatic hydrocarbons (PAH) indicate that chlorinated aromatics in the FBI are formed as a result of PAH breakdown. The detailed analysis of the isomer patterns of PCDF, PCB and PCN gives a first insight into the transformation mechanism of the PAHs and the sequence of degradation, chlorination and oxygen insertion. The major chlorination takes part at the position of the C-C cleavage during degradation of the PAHs. Further chlorination of the hydrogen position of the former PAH takes part preferably in ortho-position to this chlorination or is directed by incorporated oxygen. A perylene structure in soot is proposed as basis for the observed PCDF pattern in the FBI. Polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated phenols (PxCP) were formed in lower concentrations from the de novo experiments indicating an additional formation pathway for these compounds in the FBI.     

Dioxin and dibenzofuran concentrations in adipose tissue of a general population from Tarragona, Spain

Polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) levels were determined in adipose tissue of 15 autopsied subjects who at the time of death had lived in the city of Tarragona (Catalonia, Spain) and surroundings during at least the last 10 years. PCDD/F concentrations ranged between 13.37 and 69.37 ng I-TEQ/kg fat, with mean and median values of 30.98 and 26.30 ng I-TEQ/kg fat, respectively. PCDD/F concentrations were higher (p < 0.01) in women (mean value: 44.95 ng I-TEQ/kg fat) than in men (mean value: 24.00 ng I-TEQ/kg fat). Although individuals living in industrial areas showed higher PCDD/F levels than those living Tarragona downtown the difference was not statistically significant. When Principal Component Analysis was applied to the concentrations of PCDD/Fs found in the 15 adipose tissue samples together with those found in 20 blood samples collected in a previous study, a single two-dimensional model was obtained, which would explain 62.9% of the variance in the data. The PCDD/F concentrations in adipose tissue found in the current study are of the same order of magnitude than those reported for most industrialized countries.     

Formation of chlorinated phenols, dibenzo-p-dioxins, dibenzofurans, benzenes, benzoquinnones and perchloroethylenes from phenols in oxidative and copper (II) chloride-catalyzed thermal process

Formation of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and chlorinated phenols on CuCl(2) from unsubstituted phenol and three monochlorophenols was studied in a flow reactor over a temperature range of 100-425 degrees C. Heated nitrogen gas streams containing 8.0% oxygen were used as carrier gas. The 0.00024mol of unsubstituted phenol and 0.00039mol of each monochlorophenol were passed through a 1g and 1cm SiO(2) particle containing 0.5% (Cu by mass) CuCl(2). Chlorination preferentially occurred on ortho-(2, 6) and para-(4) positions. Chlorination increased up to 200 degrees C, and thereafter decreased as temperature increased. Chlorination of phenols plays an important role in the formation of the more chlorinated PCDD/Fs. Chlorinated benzenes are formed possibly from both chlorination of benzene and chlorodehydroxylation of phenols. Chlorinated phenols with ortho chlorine formed PCDD products, and major PCDD products were produced via loss of one chlorine. For PCDF formation, at least one unchlorinated ortho carbon was required.     

Effect of urea on fly ash PCDD/F concentrations in different particle sizes

The effect of urea as an inhibitor for reducing polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations in flue gases was studied in a pilot scale plant, together with the effect on the particle size distribution of these compounds. Total PCDD/F concentrations decreased by a maximum of 74%, the decrease being greatest for the most highly (octa-) chlorinated isomers. The PCDD/F reduction affected all the particle size classes when an adequate amount of urea was used (1% of the fuel input), which indicates that inhibition, unlike formation, is independent of the fly ash particle size distribution.     

A comprehensive pollution survey of polychlorinated dibenzo-p-dioxins and dibenzofurans by means of principal component analysis and partial least squares regression

The combined use of principal component analysis and partial least squares regression to the interpretation of polychlorinated dibenzofuran (PCDF) and dibenzo-p-dioxin (PCDD) patterns in crabs are investigated. By exploratory principal component analysis, the PCDFs and the PCDDs are ranked according to their specificity to the emission source. Among the most specific PCDFs to the emission are the 12368/13479-PeCDF and 12478-PeCDF. The 123789-HxCDD isomer is the only specific PCDD to the emission source. Partial least squares regression is used both to explore the determination of sex specific isomers, and in confirmatory analysis by quantitatively relating the pollution waste to the distance from the emission source. 123678-HxCDF is statistically significant for the separation between male and female crabs collected at the same distance from the emission source, while no separation between male and female crabs is evident from 1234789-HpCDF, Octa-CDF, 2,3,7,8-TCDD and Octa-CDD. This observation is somewhat more shaded than what has previously been reported in the literature on differences in male and female crabs. A linear relationship exists between the logtransformed distance and the concentration of PCDFs and PCDDs in male crabs collected between 18 and 33 km from the source. This model underestimates the predicted distance of crabs collected between 33 and 56 km, possible due to a higher sedimentation rate at distances closer to the fjord and the factory.

Although applied to PCDF/PCDD data in this case, the outlined multivariate methods should be applicable to all kind of similar environmental surveys.     

Metal-mediated chlorinated dibenzo-p-dioxin (CDD) and dibenzofuran (CDF) formation from phenols

Heterogeneous formation of chlorinated dibenzo-p-dioxins (CDDs) and dibenzofurans (CDFs) on CuCl2 from three phenols without ortho chlorine and one phenol with two ortho chlorines was studied in a flow reactor over a temperature range of 325-450 degrees C. Heated nitrogen gas streams containing 8% oxygen, 1.5% benzene vapor, and equal amounts of phenol, 3-chlorophenol, 3,4-dichlorophenol and 2,4,6-trichlorophenol vapor (700 ppmv, each) were passed through a 1 g particle bed of silica and 0.5% (Cu mass) CuCl2. Maximum product yields of greater than 1.4% phenol conversion to CDD and 5.7% phenol conversion to CDF were observed between 400 and 450 degrees C. CDDs formed with loss of one chlorine atom were favored. While total CDD/F yield varied with temperature, CDD/F homologue and isomer distributions did not vary significantly with temperature. Based on the results of experiments with single phenol precursors, phenol precursors could be assigned to all PCDD/F products. Of the chlorinated phenols without ortho chlorine that were studied, 3,4-dichlorophenol was found to have the greatest propensity to form CDFs.     

The behavior of PCDD and PCDF during thermal treatment of waste incineration ash

The polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) content of three fly ash samples with different elemental compositions from different municipal waste incinerators were analyzed before and after thermal treatment at 300 °C or 500 °C. Gas phase emissions during the treatments were also collected and analyzed. Substantial reductions in the total PCCD/F content of the ashes were observed after treatment at 500 °C, seemingly due to degradation rather than dechlorination. Treatment at 300 °C resulted in an increase in the PCDD/F content of the three ashes. Initial concentration of PCDD/F in the untreated ashes did not reflect the outcome of the treatment at the different temperatures. In addition, the composition of the ash was found to influence the rate of decomposition and formation of PCDD and PCDF during thermal treatment; the results showed that Cu, Fe, Ca and S play important roles in these processes.     

PCDD/F levels in plasma of a belgian population before and after the 1999 belgian PCB/DIOXIN incident

We evaluated the impact of the 1999 Belgian dioxin incident on the blood plasma polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) levels among 232 Belgian blood donors (74% men, mean age 47 years). The Red Cross made plasma samples from before the incident of these donors available. A second plasma sample was collected during the second half of 2000. The sum of the 17 PCDD/F congeners was significantly lower in 2000 compared to 1998 (417 pg/g fat versus 445 pg/g fat, respectively). This could be completely attributed to the significant decrease of OctaCDD (301 pg/g fat in 2000 versus 277 pg/g fat in 1998). Moreover a slight but significant decrease was observed for 2,3,7,8-TetraCDF and for 1,2,3,4,6,7,8-HeptaCDF. 1,2,3,7,8-PentaCDF and 2,3,4,7,8-PentaCDF however showed a slight but significant increase (respective levels in 1998 were 0.004 and 14.5 pg/g fat compared to 0.006 and 17.9 pg/g fat in 2000). Given their significantly higher presence in incident related food samples this increase can be attributed to the food contamination episode. However, the total toxicity remained unchanged (22.9 in 1998 versus 23.1 pg WHO-TEQ/g fat, p>0.05). Moreover the observed congener profiles and the total PCDD/F levels were similar to those of other European non-occupationally exposed populations. In conclusion, the 1999 PCB/dioxin incident was traceable in the plasma profiles (rise of the two specific PCDF congeners), but comparison of the results for both years indicates that the changes were too small to cause an adverse public health effect.     

Estimation of sources and inflow of dioxins and polycyclic aromatic hydrocarbons from the sediment core of Lake Suwa, Japan

To elucidate the historical changes in polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), coplanar polychlorinated biphenyl (co-PCB), and polycyclic aromatic hydrocarbon (PAH) inflows in Lake Suwa, their concentrations in the sediment core were analyzed in 5 cm interval. The maximum concentrations (depth cm) of PCDDs/DFs, co-PCBs, and PAHs were 25.2 ng/g dry (30-35 cm), 19.0 ng/g dry (30-35 cm), and 738, 795 ng/g dry (50-55 cm, 30-35 cm), respectively. Age and sedimentation rate of the sediment were estimated from the vertical changes in apparent density. Deposition rate of dioxins and PAHs were calculated from the concentration and sedimentation rate of the sediment. The results indicate that large amounts of dioxins and PAHs flowed into the lake in flood stage compared to normal stage.     

Serum PCDD/F concentration distribution in residents living in the vicinity of an incinerator and its association with predicted ambient dioxin exposure

The aim of this study was to evaluate the serum polychlorinated dibenzo-p-dioxin (PCDD) and dibenzofuran (PCDF) concentration distribution in residents living in the vicinity of an incinerator and its association with annual ambient dioxin exposure predicted by an atmospheric dispersion model. A municipal waste incinerator in Northern Taiwan was chosen for this study. This incinerator had been in operation for 6 years at the time of this study. Using the incinerator site as the center, based on the simulated ambient annual average PCDD/F concentrations. Ninety-five volunteers, all live within a radius of 5 km from the incinerator for at least 5 years, who had no occupational exposure potential, were selected based on the population distribution in each district. The average serum PCDD/F concentration for these subjects living within four zones was about 14 pg I-TEQ/g lipid. The serum distribution levels of people of the four study zones, however, were not consistent with the predicted ambient levels. Results also suggest that ambient exposure might not be the most important contributor to serum concentrations when compared to other exposure sources, such as dietary intake.     

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans from residual carbon on municipal solid waste incinerator fly ash using Na37Cl

Na37Cl was used to study the role of chlorine in the formation of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) from carbon. Adding Na37Cl to fly ash showed that this compound was a (relatively) poor chloride source; chlorine naturally present on the ash - which could include both chlorine in residual carbon and (metal) chlorides - was found to be ca. 17x more reactive. When both Na37Cl and CuCl2 were added to aqueous extracted fly ash, the percentage of 37Cl from Na37Cl included in PCDD/F increased, compared to the combination of Na37Cl/fly ash. When Na37Cl and CuCl2 were exchanged in water, followed by evaporation of the solvent, and mixed with aqueous extracted fly ash, the percentage of 37Cl included in PCDD/F was much higher. Apparently, direct transfer of 37Cl from CuCl2 to carbon and PCDD/F was much faster than transfer of 37Cl- from Na37Cl via a metal chloride (such as CuCl2) to carbon and PCDD/F. In addition to chlorine in PCDD/F originating from exchanged NaCl/CuCl2, chloride left on the fly ash after aqueous extraction and chlorine present in residual carbon could also have been incorporated in PCDD/F.