The relationship between whole effluent toxicity (WET) and chemical-based effluent quality assessment in Vojvodina (Serbia)

The relationship between whole effluent toxicity (WET) and chemical-based effluent quality assessment across a range of effluent types was examined for the first time in Serbia. WET was determined by Daphnia magna acute tests, while chemical-based toxicity was taken as theoretical for concentrations of priority chemicals and effluent quality assessment based on the valid Serbian regulations. A poor correlation was found between WET and chemical-based effluent quality assessment: positive toxicity tests were found, in general, in cases where samples satisfied the requirements of mandatory effluent monitoring. Statistically insignificant correlation between the predicted and observed toxicity indicated that the presence of priority substances accounted to the overall toxicity only to a certain degree, most probably due to a rather short list of priority pollutants regularly analysed in effluents. Current monitoring requirements neglect hazards that derive from potentially present toxicants and unpredictable toxicity of complex mixtures, which led to poor correlation between the WET and chemical-based results in this study.     

Results of a technology demonstration project to compare rapid aquatic toxicity screening tests in the analysis of industrial effluents

The results of a 'BioWise' demonstration project to assess the comparative sensitivity and practicality of seven new assays for the direct assessment of ecotoxicity in industrial effluents are presented. In addition the aim of the project was to validate the results of the new assays against benchmark data generated from non-proprietary, rapid, microplate screening assays using the regulatory species; freshwater crustacean Daphnia magna and green algae Selenastrum capricornutum, chosen in view of their environmental relevance. The new commercial test assays were: Daphnia magna, Selenastrum capricornutum and Thamnocephalus platyurus Toxkits supplied by Vickers Laboratories Ltd, containing dormant, immobilised life stages of the test species; GreenScreen EM, a yeast based assay for genotoxicity and general acute toxicity supplied by Gentronix Ltd; and CellSense a mediated, amperometric whole cell biosensor based on immobilised activated sludge and E. coli. 38 effluent samples supplied by members of SOCSA (Specialised Organic Chemicals Sector Association) were examined over a period of 13 months, in the project co-ordinated by the AstraZeneca Brixham Environmental Laboratory, and part funded by BioWise via the UK Government Department of Trade and Industry.     

Clear and present danger? The use of a yeast biosensor to monitor changes in the toxicity of industrial effluents subjected to oxidative colour removal treatments

Discharges of coloured effluents into surface waters provide conspicuous evidence of the impact of industry on the environment. The textile industry is an obvious candidate for sources of such discharges. Conventional treatment methods appear to alleviate this situation by removing colour, however the affect on toxicity is less obvious. The objective of this study was to examine the changes in effluent toxicity during the course of two alternative wastewater treatment methods, ozonation and electrochemical oxidation, using a novel toxicity biosensor, GreenScreen EM. The biosensor is capable of measuring both general acute toxicity (cytotoxicity), and more specifically genotoxicity, that is damage to a cell's DNA structure, replication or distribution, caused by substances that may be mutagenic and/or carcinogenic. The biosensor utilises a modified strain of the brewers yeast Saccharomyces cerevisiae, incorporating a gene encoding green fluorescent protein (GFP) linked to the inducible promoter of the DNA damage responsive RAD54 gene. Upon exposure to a genotoxin, the production of GFP is up-regulated in parallel with RAD54, and the resulting cellular fluorescence provides a measure of genotoxicity. Acute toxicity is simultaneously determined by monitoring relative total growth of the cell culture during incubation. The results presented in this paper show that a reduction in colouration does not necessarily correspond to a reduction in effluent toxicity.     

An expert system for water quality modelling

The RAISON-micro (Regional Analysis by Intelligent System ON a micro-computer) expert system is being used to predict the effects of mine effluents on receiving waters in Ontario. The potential of this system to assist regulatory agencies and mining industries to define more acceptable effluent limits was shown in an initial study. This system has been further developed so that the expert system helps the model user choose the most appropriate model for a particular application from a hierarchy of models. The system currently contains seven models which range from steady state to time dependent models, for both conservative and nonconservative substances in rivers and lakes. The menu driven expert system prompts the model user for information such as the nature of the receiving water system, the type of effluent being considered, and the range of background data available for use as input to the models. The system can also be used to determine the nature of the environmental conditions at the site which are not available in the textual information database, such as the components of river flow. Applications of the water quality expert system are presented for representative mine sites in the Timmins area of Ontario.     

Lognormality of trace contaminant concentrations in sewage effluents

It is important to understand the statistical distribution of monitoring data for them to be of value in determining the parameters of environmental models. No such distributional information has been available for many trace contaminants in sewage effluents. This paper applies the data of a major UK sewage works’ effluent monitoring programme to determine the validity of the common assumption that data are lognormally distributed. Effluent quality was monitored at 162 wastewater treatment works over 1 year, generating over 3,000 results for each of over 40 substances, including metals, trace organic substances and pharmaceuticals. It is demonstrated that the lognormal assumption is clearly justified for the great majority of substances in the spatial case—for annual average effluent concentrations across different treatment works. In the site-specific, temporal case—for individual determinations of concentration at a single site over an annual period—lognormality is generally supported but not demonstrated so unequivocally for all site/substance combinations. The principal source of uncertainty was lack of sufficient numbers of observations reported to adequately low reporting limits.     

Intra-laboratory evaluation of Microbial Assay for Risk Assessment (MARA) for potential application in the implementation of the Water Framework Directive (WFD)

The Microbial Assay for Risk Assessment (MARA) is an innovative system based on an array of 11 different microbial species freeze-dried in a 96-well micro-titre plate format. Developed for testing the toxicity of chemicals, mixtures and environmental samples, the assay employs species of a taxonomically diverse range. In addition to ten prokaryotic species, a eukaryote (yeast) is included in the range. The MARA's innate scope of a multi-dimensional test allows determination of toxicity based on a unique assay fingerprint or index, numerically expressed as the mean Microbial Toxic Concentration (MTC). The most significant potential of the test is in the additional inference that can be conveyed to the toxicity evaluation because of the presence of each of the constituent species. In view of the fact that conventional aquatic bioassays, like fish or cladoceran tests, are expensive and impractical, the MARA could provide a cost-effective solution for routine ecotoxicological testing. The performance of the MARA was evaluated to ascertain its capability and potential scope. Sensitivity to toxicants and different environmental samples was assessed. Evaluation included comparison with other tests: namely Microtox, invertebrate (Daphnia magna and Thamnocephalus platyurus) microbiotests, and respiration-inhibition and nitrification-inhibition tests. The most sensitive invertebrate test was found to be the T. platyurus microbiotest for three of the four metals tested. The LC(50) values for this test for Cd(ii), Cr(vi) and As(iii) were 0.2, 0.018 and 0.3 mg l(-1), respectively; and the corresponding most sensitive MARA species MTC values were 4.4, 2.8 and 17 mg l(-1), respectively.     

Combining passive sampling and toxicity testing for evaluation of mixtures of polar organic chemicals in sewage treatment plant effluent

Effluent from sewage treatment plants has been associated with a range of pollutant effects. Depending on the influent composition and treatment processes the effluent may contain a myriad of different chemicals which makes monitoring very complex. In this study we aimed to monitor relatively polar organic pollutant mixtures using a combination of passive sampling techniques and a set of biochemistry based assays covering acute bacterial toxicity (Microtox), phytotoxicity (Max-I-PAM assay) and genotoxicity (umuC assay). The study showed that all of the assays were able to detect effects in the samples and allowed a comparison of the two plants as well as a comparison between the two sampling periods. Distinct improvements in water quality were observed in one of the plants as result of an upgrade to a UV disinfection system, which improved from 24x sample enrichment required to induce a 50% response in the Microtox assay to 84x, from 30x sample enrichment to induce a 50% reduction in photosynthetic yield to 125x, and the genotoxicity observed in the first sampling period was eliminated. Thus we propose that biochemical assay techniques in combination with time integrated passive sampling can substantially contribute to the monitoring of polar organic toxicants in STP effluents.     

Necessity of Toxicity Assessment in Turkish Industrial Discharges (Examples from Metal and Textile Industry Effluents)

Toxicity of some organic and inorganic chemicals to microorganisms is an important consideration in assessingtheir environmental impact against their economic benefits.Microorganisms play an important role in several environmentalprocesses, both natural and engineered. Some organic and inorganics at toxic levels have been detected in industrial discharges resulting in plant upsets and discharge permit violations. In addition to this, even though in some cases the effluent wastewater does not exceed the discharge limits,the results of toxicity tests show potential toxicity. Toxicityknowledge of effluents can benefit treatment plant operators inoptimising plant operation, setting pre-treatment standards, and protecting receiving water quality and in establishing sewer discharge permits to safeguard the plant. In the Turkish regulations only toxicity dilution factor (TDF) with fish is part of the toxicity monitoring program of permissible wastewater discharge. In various countries, laboratory studiesinvolving the use of different organisms and protocol for toxicity assessment was conducted involving a number of discharges.In this study, it was aimed to investigate the acute toxicity of textile and metal industry wastewaters by traditional and enrichment toxicity tests and emphasize the importance of toxicity tests in wastewater discharge regulations. The enrichment toxicity tests are novel applications and give anidea whether there is potential toxicity or growth limiting and stimulation conditions. Different organisms were used suchas bacteria (Floc and Coliform bacteria) algae (Chlorella sp.), fish (Lepistes sp.) and protozoan (Vorticella sp.) to represent four tropic levels. The textile industry results showed acute toxicity for at least one organism in 8 out of 23 effluent samples. Acute toxicity for at least two organisms in 7 out of 23 effluent sampling was observed for the metal industry. The toxicity test results were assessed with chemical analyses such as COD, BOD, color and heavy metals. It was observed that the toxicity of the effluents could not be explained by using physicochemical analyses in 5 cases for metal and 4 cases for the textile industries. The results clearly showed that the useof bioassay tests produce additional information about the toxicity potential of industrial discharges and effluents.     

Polyfluoroalkyl compounds in the aquatic environment: a review of their occurrence and fate

The occurrence and fate of polyfluoroalkyl compounds (PFCs) in the aquatic environment has been recognized as one of the emerging issues in environmental chemistry. PFCs comprise a diverse group of chemicals that are widely used as processing additives during fluoropolymer production and as surfactants in consumer applications for over 50 years. PFCs are known to be persistent, bioaccumulative and have possible adverse effects on humans and wildlife. As a result, perfluorooctane sulfonate (PFOS) has been added to the persistent organic pollutants (POPs) list of the Stockholm Convention in May 2009. However, their homologues, neutral precursor compounds and new PFCs classes continue to be produced. In general, several PFCs from different classes have been detected ubiquitously in the aqueous environment while the concentrations usually range between pg and ng per litre for individual compounds. Sources of PFCs into the aqueous environment are both point sources (e.g., wastewater treatment plant effluents) and nonpoint sources (e.g., surface runoff). The detected congener composition in environmental samples depends on their physicochemical characteristics and may provide information to their sources and transport pathways. However, the dominant transport pathways of individual PFCs to remote regions have not been conclusively characterised to date. The objective of this article is to give an overview on existing knowledge of the occurrence, fate and processes of PFCs in the aquatic environment. Finally, this article identifies knowledge gaps, presents conclusions and recommendations for future work.     

Gene-TEQ--a standardized comparative assessment of effects in the comet assay using genotoxicity equivalents

Existing methods for the comparison of genotoxic effects in the comet assay bear considerable disadvantages such as the problem to link information about concentration dependence and severity of effects. Moreover, given the lack of standardized protocols and the use of various standards, it may be extremely difficult to compare different studies. In order to provide a method for standardized comparative assessment of genotoxic effects, the concept of genotoxicity equivalents (Gene-TEQ) was developed. As potential reference compounds for genotoxic effects, three directly acting (N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), methyl-methanesulfonate, and N-methyl-N-nitrosourea) and three indirectly acting (cyclophosphamide, dimethylnitrosamine, and 4-nitroquinoline-oxide) genotoxic substances were compared with respect to their cytotoxic (neutral red) and genotoxic (comet assay) concentration-response profiles in the permanent fish cell line RTL-W1. For further comparison, two sediment extracts from the upper Danube River were investigated as environmental samples. Based on the results of cytotoxicity and genotoxicity testing, MNNG was selected as the reference compound. At several exposure levels and durations, genotoxic effects of both the other pure substances and the environmental samples were calculated as percentages of the maximum MNNG effect and related to the absolute MNNG effect (EC values). Thus, genotoxicity equivalent factors (Gene-TEQs) relative to MNNG could be calculated. Gene-TEQs can easily be applied to pure substances, mixtures and field samples to provide information about their toxicity relative to the reference compound. Furthermore, the Gene-TEQ concept allows a direct comparison of environmental samples from different laboratories.     

Rice seed toxicity tests for organic and inorganic substances

Plant seed toxicity tests can be used to evaluate hazardous waste sites and to assess toxicity of complex effluents and industrial chemicals. Conventional plant seed toxicity tests are performed using culture dishes containing filter paper. Some reports indicate that filter papers might interfere with the toxicity of inorganic substances. In this study, a plastic seed tray was used. Rice was used as the test species.A comparison of results in the literature and this study revealed that variation of test species, methods, exposure duration, and other factors may affect the test results. The results of this study showed that the order of decreasing toxicity of metal ions was Cu>Ag>Ni>Cd>Cr(VI)>Pb>Zn>Mn>NaF for rice. The test results were similar to those reported in the literature for lettuce Ag>Ni>Cd,Cu>Cr(VI)>Zn>Mn, millet Cu,Ni>Cd>Cr(VI)>Zn>Mn, and ryegrass Cu>Ni>Mn>>Pb>Cd>Zn>Al>Hg>Cr>Fe. The order of decreasing toxicity of organic herbicides was paraquat, 2,4-D>>glyphosate>bromacil.     

Occurrence and removal efficiencies of eight EDCs and estrogenicity in a STP

The occurrence and removal of eight endocrine disrupting compounds (EDCs), including estrone (E(1)), 17β-estradiol (E(2)), estriol (E(3)), 17α-ethinylestradiol (EE(2)), diethylstilbestrol (DES), bisphenol A (BPA), nonylphenol (NP) and octylphenol (OP), and their estrogenicities were investigated in a sewage treatment plant in Harbin city, China. The EDCs were extracted from wastewater samples by solid phase extraction (SPE) method and analyzed with gas chromatography coupled with mass spectrometry (GC-MS). The average concentrations in the influents and effluents ranged from 6.3 (EE(2)) to 1725.8 ng L(-1) (NP) and from 相似文献   

Combining Accuracy Assessment of Land-Cover Maps with Environmental Monitoring Programs

A scientifically valid accuracy assessment of a large-area, land-cover map is expensive. Environmental monitoring programs offer a potential source of data to partially defray the cost of accuracy assessment while still maintaining the statistical validity. In this article, three general strategies for combining accuracy assessment and environmental monitoring protocols are described. These strategies range from a fully integrated accuracy assessment and environmental monitoring protocol, to one in which the protocols operate nearly independently. For all three strategies, features critical to using monitoring data for accuracy assessment include compatibility of the land-cover classification schemes, precisely co-registered sample data, and spatial and temporal compatibility of the map and reference data. Two monitoring programs, the National Resources Inventory (NRI) and the Forest Inventory and Monitoring (FIM), are used to illustrate important features for implementing a combined protocol.     

Whole Effluent Toxicity (WET) Tests on Wastewater Treatment Plants with Daphnia magna and Selenastrum capricornutum

Whole effluent toxicity (WET) tests, with Daphnia magna and Selenastrum capricornutum, were introduced to evaluate the biological toxicities of effluents from the wastewater treatment plants (WWTPs) in Korea. In WET tests of WWTPs effluents, 33.3% (33/99) for D. magna and 92.6% (75/81) for S. capricornutum revealed greater than 1 toxic unit (TU), even though all the treatment plants investigated were operating in compliance with the regulations, as assessed using conventional monitoring methods (i.e., BOD and total concentration of N or P, etc). There were only minor differences in toxicities according to the types of influents (municipal and agro-industrial) in all treatment plants. However, the effluents treated by an activated sludge treatment process were found to exhibit significantly lower toxicity than those treated by rotating biological contactor (RBC) and extended aeration processes. The seasonal variations in the toxicity were lower in the summer compared to winter, which may have been due to the rainfall received to the sewage intake system during the former period. The impact of WET on river water was also investigated based on the discharge volume. At sites A and B, the total impact of toxicity to stream and river waters was observed to be 70.9% and 90.4% for D. magna and S. capricornutum, respectively. The other four small treatment plants (sites F, G, H and I), with relative discharging volumes between 0.001 and 0.002, contribute less than 1% to the total toxicity.     

Toxicity assessment of individual ingredients of synthetic-based drilling muds (SBMs)

Synthetic-based drilling muds (SBMs) offer excellent technical characteristics while providing improved environmental performance over other drilling muds. The low acute toxicity and high biodegradability of SBMs suggest their discharge at sea would cause minimal impacts on marine ecosystems, however, chronic toxicity testing has demonstrated adverse effects of SBMs on fish health. Sparse environmental monitoring data indicate effects of SBMs on bottom invertebrates. However, no environmental toxicity assessment has been performed on fish attracted to the cutting piles. SBM formulations are mostly composed of synthetic base oils, weighting agents, and drilling additives such as emulsifiers, fluid loss agents, wetting agents, and brine. The present study aimed to evaluate the impact of exposure to individual ingredients of SBMs on fish health. To do so, a suite of biomarkers [ethoxyresorufin-O-deethylase (EROD) activity, biliary metabolites, sorbitol dehydrogenase (SDH) activity, DNA damage, and heat shock protein] have been measured in pink snapper (Pagrus auratus) exposed for 21 days to individual ingredients of SBMs. The primary emulsifier (Emul S50) followed by the fluid loss agent (LSL 50) caused the strongest biochemical responses in fish. The synthetic base oil (Rheosyn) caused the least response in juvenile fish. The results suggest that the impact of Syndrill 80:20 on fish health might be reduced by replacement of the primary emulsifier Emul S50 with an alternative ingredient of less toxicity to aquatic biota. The research provides a basis for improving the environmental performance of SBMs by reducing the environmental risk of their discharge and providing environmental managers with information regarding the potential toxicity of individual ingredients.     

Estrogenicity of pyrethroid insecticide metabolites

There is concern that insecticides are able to mimic the action of 17beta-estradiol by interaction with the human estrogen receptor. Pyrethroids are commonly used insecticides and several have been assessed for potential endocrine disrupting activity by various methods. It has been noted that some metabolites of pyrethroids, in particular, permethrin and cypermethrin, have chemical structures that are more likely to interact with the cellular estrogen receptor than the parent pyrethroid. For this study permethrin and cypermethrin metabolites 3-(4-hydroxy-3-phenoxy)benzyl alcohol, 3-(4-hydroxy-3-phenoxy)benzoic acid, and N-3-(phenoxybenzoyl)glycine were synthesised, and together with the commercially available 3-phenoxybenzyl alcohol, 3-phenoxybenzaldehyde, and 3-phenoxybenzoic acid, were studied in a recombinant yeast assay expressing human estrogen receptors (YES). Three metabolites, 3-phenoxybenzyl alcohol, 3-(4-hydroxy-3-phenoxy)benzyl alcohol, and 3-phenoxybenzaldehyde, showed estrogenic activity of approximately 10(5) less than that of 17beta-estradiol. No activity was observed in the yeast assay for 3-phenoxybenzoic acid, 3-(4-hydroxy-3-phenoxy)benzoic acid, and N-3-(phenoxybenzoyl)glycine. The results from this study show that pyrethroid metabolites are capable of interacting with the human estrogen receptor, and so might present a risk to human health and environmental well being. The impact would be expected to be small, but still add to the overall environmental xenoestrogen load.     

Whole-cell bacterial biosensors for rapid and effective monitoring of heavy metals and inorganic pollutants in wastewater

The increasing number of potentially harmful pollutants in the wastewater effluent discharge necessitates the need for the development of fast and cost effective analytical techniques for extensive monitoring programmes to assess the effectiveness of the treatment process. This study compared the use of bacterial biosensors to the conventional Daphnia magna assay, Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) tests as well as chemical analysis, for monitoring the toxicity of wastewater. The bacterial biosensors constructed in this study, using S. sonnei and E. coli, were found to be sensitive to the toxicity of the wastewater effluents. A linear increase in bioluminescence with increasing concentration of heavy metals and inorganic pollutants in water was observed, with a correlation coefficient (r(2)) as high as 0.995 and 0.997, respectively. No notable correlation between biosensor toxicity and BOD and COD test results was observed. These bacterial biosensors could provide appropriate alternatives for a rapid, sensitive and cost effective detection of wastewater quality. However, the differences in sensitivity obtained for the different systems suggest that the use of a battery of toxicity assays may be required to provide a real ecotoxicological assessment of wastewater samples.     

Ecotoxicological sediment evaluations in marine aquaculture areas of Chile

Given its geographic characteristics, the southern Chilean fjord area is subjected to growing environmental pressure from the development of diverse forms of aquaculture (i.e., fish, algae, shellfish). The sediments accumulate substances as a natural sink, and ecotoxicology assays offer a reliable and robust proxy for sediment quality analyses. This study's objective was to establish a mid-range toxicity base line for the sediments in the region by applying a battery of non-specific ecotoxicological assays. Sediment samples (28) were collected in the channels and fjords studied during the CIMAR-Fiordos 11 cruise (July 2005). The sediments were evaluated using different species endemic to the eastern Pacific as targets: Ampelisca araucana, Tisbe longicornis, Arbacia spatuligera, and Dunaliella tertiolecta. The conditions for each assay were reported previously. Of the four species used as ecotoxicological tools, only D. tertiolecta differed significantly from the control group (negative) in terms of its growth. This difference could be attributed to nutrient enrichment. In general, we concluded that, although local changes occurred in the sediments, the mesoscale magnitude of the ecotoxicological alterations was small. Nonetheless, a surveillance program should be implemented that would allow us to follow-up and analyze the changes that are taking place in the systems on broader scales of time and space.     

Application of Microwave Plasma Atomic Emission Spectrometry (MP-AES) for environmental monitoring of industrially contaminated sites in Hyderabad City

Recently introduced microwave plasma-atomic emission spectroscopy (MP-AES) represents yet another and very important addition to the existing array of modern instrumental analytical techniques. In this study, an attempt is made to summarize the performance characteristics of MP-AES and its potential as an analytical tool for environmental studies with some practical examples from Patancheru and Uppal industrial sectors of Hyderabad city. A range of soil, sediment, water reference materials, particulate matter, and real-life samples were chosen to evaluate the performance of this new analytical technique. Analytical wavelengths were selected considering the interference effects of other concomitant elements present in different sample solutions. The detection limits for several elements were found to be in the range from 0.05 to 5 ng/g. The trace metals analyzed in both the sectors followed the topography with more pollution in the low-lying sites. The metal contents were found to be more in ground waters than surface waters. Since a decade, the pollutants are transfered from Patancheru industrial area to Musi River. After polluting Nakkavagu and turning huge tracts of agricultural lands barren besides making people residing along the rivulet impotent and sick, industrialists of Patancheru are shifting the effluents to downstream of Musi River through an 18-km pipeline from Patancheru. Since the effluent undergoes primary treatment at Common Effluent Treatment Plant (CETP) at Patanchru and travels through pipeline and mixes with sewage, the organic effluents will be diluted. But the inorganic pollutants such as heavy and toxic metals tend to accumulate in the environmental segments near and downstreams of Musi River. The data generated by MP-AES of toxic metals like Zn, Cu, and Cr in the ground and surface waters can only be attributed to pollution from Patancheru since no other sources are available to Musi River.