纳滤膜技术在地下水除砷应用中的研究进展

砷污染突发事件的频发严重威胁着地下水饮用水水源的水质安全，加之饮用水控制标准的提高，就对饮用水除砷技术提出了更高的要求，而纳滤(NF)膜分离技术为饮用水除砷提供了新的思路。首先概述了地下水中砷的存在形态、化学性质以及我国高砷地下水地区分布，然后分析了NF膜特点、除砷机理与性能，系统地阐述了各种因素包括膜操作因素（操作压力、膜回收率、膜排布方式等）和原水水质因素（pH、水温、共存离子、共存有机物及砷浓度与砷价态等），对NF膜除砷性能的影响。此外，对NF除砷的关键问题，如原水预处理、膜浓水处理、膜污染及其清洗等，也作了探讨。最后，总结了目前NF除砷应用中所面临的问题，探索性提出了NF膜技术在除砷应用中的研究方向。     

四种净水工艺对水源水微量有机物去除的研究

以UV254和CODMn代表饮用水源水中有机物替代指标.对常规处理、生物陶粒预处理、生物滤池、生物活性炭(BAC)、颗粒活性炭(GAC)、纳滤和光催化氧化进行组合,形成不同的处理流程,研究各流程对UV254和CODMn的去除效果.结果表明,各工艺流程都有一定的处理效率,其中以生物滤池和纳滤为主的组合流程处理效果最佳.此流程对UV254的去除率接近100%,CODMn的去除率达到78.6%,大大提高了饮用水的安全性.     

Water reclamation during drinking water treatments using polyamide nanofiltration membranes on a pilot scale

The aim of this study was to investigate the performances of polyamide nanofiltration membranes during water reclamation. The study was conducted using nanofiltration concentrates obtained from two different nanofiltration drinking water treatment plants placed in the northern part of Serbia (Kikinda and Zrenjanin). Used nanofiltration concentrates contained high concentrations of arsenic (45 and 451 μg/L) and natural organic matter (43.1 and 224.40 mgKMnO₄/L). Performances of polyamide nanofiltration membranes during water reclamation were investigated under various fluxes and transmembrane pressures in order to obtain drinking water from nanofiltration concentrates and, therefore, reduce the amount of produced concentrates and minimize the waste that has to be discharged in the environment. Applied polyamide nanofiltration membranes showed better removal efficiency during water reclamation when the concentrate with higher content of arsenic and natural organic matter was used while the obtained permeates were in accordance with European regulations. This study showed that total concentrate yield can be reduced to ~5 % of the optimum flux value, in both experiments. The obtained result for concentrate yield under the optimum flux presents considerable amount of reclaimed drinking water and valuable reduced quantity of produced wastewater.     

土壤-纳滤系统处理再生水补充地下水的研究

为充分保障再生水回灌地下时的水质安全、提供高质量地下水资源,在土壤处理系统中嵌入纳滤技术强化对再生水的处理效果,并初步探讨土壤系统作为前处理对纳滤膜污染的控制机理.结果表明,未采用臭氧氧化预处理前,土壤处理对再生水DOC和UV254的平均去除率分别为22%和20%.臭氧氧化对UV254的平均去除率为51%,并将土壤对D...     

Priority organic micropollutants in water sources in Flanders and the Netherlands and assessment of removal possibilities with nanofiltration

The occurrence of organic micropollutants in ground- and surface waters has become an important concern for the drinking water industry, mainly because of possible related health effects. Due to the polar nature of some of these pollutants, they are not completely removed by traditional water treatment barriers. This paper offers an overview of priority organic micropollutants and their occurrence in Flemish and Dutch water sources. Furthermore, rejection by nanofiltration is qualitatively predicted for the selected priority micropollutants. The qualitative prediction is based on the values of key solute and membrane parameters in nanofiltration. Predicted values are then compared with experimental values obtained from literature. Overall, the qualitative predictions are roughly in agreement with literature values. Prediction based on key parameters may thus prove to be a very quick and useful technique to assess the implementation of nanofiltration as a treatment step for organic micropollutants in drinking water plant design.     

饮用水除砷技术研究进展

饮用水中的砷对人体健康危害很大。介绍了从饮用水中去除砷的各种方法，总结了目前除砷技术存在的不足，指出混凝微滤工艺具有除砷效率高、能耗低、操作简单等优点，应成为今后饮用水除砷技术的发展方向。     

Comparison of the removal efficiency of endocrine disrupting compounds in pilot scale sewage treatment processes

The removal efficiency of endocrine disrupting compounds from effluents using pilot scale sewage treatment processes, including various treatment technologies, such as membrane bioreactors (MBR), nanofiltration (NF) and reverse osmosis (RO) for the purpose of water reuse, were estimated and compared. The calculated estrogenic activity, expressed in ng-EEQ/l, based on the concentration detected by GC/MS, and relative potencies for each target compound were compared to those measured using the E-screen assay. The removal efficiencies for nonylphenol, was within the range of 55-83% in effluents. High removal efficiencies of approximately >70% based on the detection limits were obtained for bisphenol A, E1, EE2 and genistein with each treatment processes, with the exception of E1 ( approximately 64%) using the MBR process. The measured EEQ values for the effluents from the MBR, NF and RO processes also indicated low estrogenic activities of 0.65, 0.23 and 0.05 ng-EEQ/l, respectively. These were markedly reduced values compared with the value of 1.2 ng-EEQ/l in influent. Consequently, the removals of EDCs in terms of the EEQ value from the biological and chemical determinations were sufficiently achieved by the treatment process applied in this study, especially in the cases of the NF and RO treatments.     

The role of wastewater treatment in protecting water supplies against emerging pathogens.

Traditionally, regulators, dischargers, and even water suppliers believed that wastewater discharge meeting the levels of 200 cfu/ 100 mL of fecal coliforms in wastewater effluent was sufficient to protect against downstream microbial effects. However, these beliefs are now being challenged by emerging pathogens that are resistant to standard water and wastewater treatment processes, exhibit extended survival periods in the environment, can adversely affect sensitive subpopulations, and require extremely low doses for human infection. Based on this new information, it is estimated that discharges of emerging pathogens from conventional wastewater treatment plants as far as 160 km upstream and cumulative amounts of wastewater discharge ranging from 2 to 20 ML/d have the potential to reach a water supply intake in a viable state at significant concentrations that could exceed regulatory limits for drinking water supplies, increase endemic risk from drinking water, and/or require additional drinking water treatment. Wastewater dischargers may be able mitigate this potential effect and achieve upwards of 6 log combined removal and inactivation of emerging pathogens to mitigate drinking water effects by using alternative treatment processes, such as filtration or UV light disinfection, or optimizing these processes based on site-specific conditions.     

Application of molecularly imprinted and non-imprinted polymers for removal of emerging contaminants in water and wastewater treatment: a review

Over the past decade, several studies have reported trace levels of endocrine disrupting compounds, pharmaceuticals, and personal care products in surface waters, drinking water, and wastewater effluents. There has also been an increased concern about the ecological and human health impact of these contaminants, and their removal from water and wastewater has become a priority. Traditional treatment processes are limited in their ability to remove emerging contaminants from water, and there is a need for new technologies that are effective and feasible. This paper presents a review on recent research results on molecularly imprinted (MIP) and non-imprinted (NIP) polymers and evaluates their potential as a treatment method for the removal of emerging contaminants from water and wastewater. It also discusses the relative benefits and limitations of using MIP or NIP for water and wastewater treatment. MIP, and in particular NIP, offer promising applications for wastewater treatment, but their toxicity and possible health effects should be carefully studied before they are considered for drinking water treatment. More research is also required to determine how best to incorporate MIP and NIP in treatment plants.     

Magnetic nanocomposites for sustainable water purification—a comprehensive review

Numerous contaminants in huge amounts are discharged to the environment from various anthropogenic activities. Waterbodies are one of the major receivers of these contaminants. The contaminated water can pose serious threats to humans and animals, by distrubing the ecosystem. In treating the contaminated water, adsorption processes have attained significant maturity due to lower cost, easy operation and environmental friendliness. The adsorption process uses various adsorbent materials and some of emerging adsorbent materials include carbon- and polymer-based magnetic nanocomposites. These hybrid magnetic nanocomposites have attained extensive applications in water treatment technologies due to their magnetic properties as well as combination of unique characteristics of organic and inorganic elements. Carbon- and polymer-related magnetic nanocomposites are more adapted materials for the removal of various kinds of contaminants from waterbodies. These nanocomposites can be produced via different approaches such as filling, pulse-laser irradiation, ball milling, and electro-spinning. This comprehensive review is compiled by reviewing published work of last the latest recent 3 years. The review article extensively focuses on different approaches for producing various carbon- and polymer-based magnetic nanocomposites, their merits and demerits and applications for sustainable water purification. More specifically, use of carbon- and polymer-based magnetic nanocomposites for removal of heavy metal ions and dyes is discussed in detail, critically analyzed and compared with other technologies. In addition, commercial viability in terms of regeneration of adsorbents is also reviewed. Furthermore, the future challenges and prospects in employing magnetic nanocomposites for contaminant removal from various water sources are presented.

     

安全饮用水保障处理中试平台的开发和建设

安全饮用水保障处理中试平台，除具有常规处理工艺外，还引入臭氧接触氧化／催化臭氧氧化、纳滤和反渗透过滤技术、动态膜树脂吸附、光催化氧化、管网生物膜控制等新技术。作者介绍了中试平台建设的设计思路、处理流程及控制系统，并对平台建设的作用进行了阐述。     

The use of nanoparticles in polymeric and ceramic membrane structures: Review of manufacturing procedures and performance improvement for water treatment

Membrane separations are powerful tools for various applications, including wastewater treatment and the removal of contaminants from drinking water. The performance of membranes is mainly limited by material properties. Recently, successful attempts have been made to add nanoparticles or nanotubes to polymers in membrane synthesis, with particle sizes ranging from 4 nm up to 100 nm. Ceramic membranes have been fabricated with catalytic nanoparticles for synergistic effects on the membrane performance. Breakthrough effects that have been reported in the field of water and wastewater treatment include fouling mitigation, improvement of permeate quality and flux enhancement. Nanomaterials that have been used include titania, alumina, silica, silver and many others. This paper reviews the role of engineered nanomaterials in (pressure driven) membrane technology for water treatment, to be applied in drinking water production and wastewater recycling. Benefits and drawbacks are described, which should be taken into account in further studies on potential risks related to release of nanoparticles into the environment.     

不同水处理工艺对地表水中AOC的去除效果

研究了以A江水、B河水为原水的常规处理工艺和以C湖水为原水的两种深度处理工艺对有机污染物的去除效果.对水样的AOC、TOC和UV254进行了分析,结果表明,4个工艺对AOC的去除率分别是63.6%、-97.9% 、84.2%和94.7% ;对TOC的去除率分别是61%、6.6%、66.7%和75% ;对UV254的去除率分别是17.9%、25.6%、83.3%和95.1% ,与深度处理工艺相比,常规处理工艺不能保证饮用水的生物稳定性.     

A review on bisphenol A occurrences,health effects and treatment process via membrane technology for drinking water

Massive utilization of bisphenol A (BPA) in the industrial production of polycarbonate plastics has led to the occurrence of this compound (at μg/L to ng/L level) in the water treatment plant. Nowadays, the presence of BPA in drinking water sources is a major concern among society because BPA is one of the endocrine disruption compounds (EDCs) that can cause hazard to human health even at extremely low concentration level. Parallel to these issues, membrane technology has emerged as the most feasible treatment process to eliminate this recalcitrant contaminant via physical separation mechanism. This paper reviews the occurrences and effects of BPA toward living organisms as well as the application of membrane technology for their removal in water treatment plant. The potential applications of using polymeric membranes for BPA removal are also discussed. Literature revealed that modifying membrane surface using blending approach is the simple yet effective method to improve membrane properties with respect to BPA removal without compromising water permeability. The regeneration process helps in maintaining the performances of membrane at desired level. The application of large-scale membrane process in treatment plant shows the feasibility of the technology for removing BPA and possible future prospect in water treatment process.     

Removal of arsenic from drinking water by chemical precipitation--a modeling and simulation study of the physical-chemical processes.

A dynamic mathematical model was developed for removal of arsenic from drinking water by chemical coagulation-precipitation and was validated experimentally in a bench-scale set-up. While examining arsenic removal efficiency of the scheme under different operating conditions, coagulant dose, pH and degree of oxidation were found to have pronounced impact. Removal efficiency of 91-92% was achieved for synthetic feed water spiked with 1 mg/L arsenic and pre-oxidized by potassium permanganate at optimum pH and coagulant dose. Model predictions corroborated well with the experimental findings (the overall correlation coefficient being 0.9895) indicating the capability of the model in predicting performance of such a treatment plant under different operating conditions. Menu-driven, user-friendly Visual Basic software developed in the study will be very handy in quick performance analysis. The simulation is expected to be very useful in full-scale design and operation of the treatment plants for removal of arsenic from drinking water.     

光化学氧化技术去除水中有机污染物的试验研究

以自来水为试验对象，对紫外－臭氧和紫外－二氧化钛两种光化学氧化技术对水中微量有机污染物的去除进行了试验研究，结果表明两种工艺的UVA（紫外吸光度）去除率均达到80％以上，对氯仿的去除也均能达到国家饮用水标准。在此基础上，自制了一种催化剂膜，并取得了预期的处理效果，有望在新型净水技术及设备的研制和开发上得到应用。     

Evaluating of arsenic(V) removal from water by weak-base anion exchange adsorbents

Arsenic contamination of groundwater has been called the largest mass poisoning calamity in human history and creates severe health problems. The effective adsorbents are imperative in response to the widespread removal of toxic arsenic exposure through drinking water. Evaluation of arsenic(V) removal from water by weak-base anion exchange adsorbents was studied in this paper, aiming at the determination of the effects of pH, competing anions, and feed flow rates to improvement on remediation. Two types of weak-base adsorbents were used to evaluate arsenic(V) removal efficiency both in batch and column approaches. Anion selectivity was determined by both adsorbents in batch method as equilibrium As(V) adsorption capacities. Column studies were performed in fixed-bed experiments using both adsorbent packed columns, and kinetic performance was dependent on the feed flow rate and competing anions. The weak-base adsorbents clarified that these are selective to arsenic(V) over competition of chloride, nitrate, and sulfate anions. The solution pH played an important role in arsenic(V) removal, and a higher pH can cause lower adsorption capacities. A low concentration level of arsenic(V) was also removed by these adsorbents even at a high flow rate of 250–350 h^?1. Adsorbed arsenic(V) was quantitatively eluted with 1 M HCl acid and regenerated into hydrochloride form simultaneously for the next adsorption operation after rinsing with water. The weak-base anion exchange adsorbents are to be an effective means to remove arsenic(V) from drinking water. The fast adsorption rate and the excellent adsorption capacity in the neutral pH range will render this removal technique attractive in practical use in chemical industry.     

TiO2光催化技术处理饮用水微污染及杀灭微生物的研究

光催化处理饮用水微量污染物以及在饮用水消毒和杀菌方面的研究是近年来研究的热点.本文论述了 TiO2光催化处理饮用水中的微量卤代物、腐殖质、微生物代谢产物,以及杀灭细菌、真菌和病毒等微生物的研究进展.探讨了光催化杀灭微生物的作用机制,最后对该研究领域的发展方向提出建议和展望.     

Trace organic chemicals contamination in ground water recharge

Population growth and unpredictable climate changes will pose high demands on water resources in the future. Even at present, surface water is certainly not enough to cope with the water requirement for agricultural, industrial, recreational and drinking purposes. In this context, the usage of ground water has become essential, therefore, their quality and quantity has to be carefully managed. Regarding quantity, artificial recharge can guarantee a sustainable level of ground water, whilst the strict quality control of the waters intended for recharge will minimize contamination of both the ground water and aquifer area. However, all water resources in the planet are threatened by multiple sources of contamination coming from the extended use of chemicals worldwide. In this respect, the environmental occurrence of organic micropollutants such as pesticides, pharmaceuticals, industrial chemicals and their metabolites has experienced fast growing interest. In this paper an overview of the priority and emerging organic micropollutants in the different source waters used for artificial aquifer recharge purposes and in the recovered water is presented. Besides, some considerations regarding fate and removal of such compounds are also addressed.     

饮用水中硝酸盐的脱除

饮用水中硝酸盐氮的污染问题日趋严重,对人类的健康有多方面的危害.离子交换、反渗透、电渗、生物反硝化、化学和化学催化反硝化都可从水中脱除硝酸盐,但目前投入实用的只有离子交换、生物反硝化、反渗透三种工艺.这些脱硝方法各有优缺点.本文综述了饮用水脱硝的应用与研究的现状,并对其发展的趋势进行了简单的论述.