Respiratory Problems of Workers in the Zarda Industry in Kolkata,India

This study was undertaken to assess the pulmonary and respiratory problems of workers in a zarda factory. A total of 70 permanent zarda workers (50 manufacturing workers and 20 office ones) were studied in a factory in Baguihati, Kolkata, India. The study included (a) completion of a questionnaire (on pulmonary and respiratory problems), (b) measurement of physical parameters, (c) spirometry and (d) measurement of peak expiratory flow rate. At the same time, the worksite was analyzed with an OSHA-recommended ergonomics checklist. Many zarda manufacturing workers complained of respiratory symptoms. Continuous exposure to the tobacco processing environment reduced the workers’ lung volume and peak expiratory flow rates. Our study indicates that zarda manufacturing workers may have respiratory and pulmonary disorders related to exposure to tobacco dust in their work environment.     

Model for predicting peak expiratory flow rate of Nigerian workers in a cement factory in Itori,Ogun State,Nigeria

The main aim of the study was to propose a model for predicting the peak expiratory flow rate (PEFR) of Nigerian workers in a cement factory. Sixty randomly selected non-smoker and healthy workers (30 in production sections, 30 in the administrative section of the factory) participated in the study. Their physical characteristics and PEFR were measured. Multiple correlations using SPSS version 16.0 were performed on the data. The values of PEFR, using the obtained model, were compared with the measured values using a two-tailed t test. There were positive correlations among age, height and PEFR. A prediction equation for PEFR based on age, height, weight and years of exposure (experience) was obtained with R²?=?.843 (p?<?0.001). The developed model will be useful for the management in determining PEFR of workers in the cement industry for possible medical attention.     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.     

Respiratory problems of workers in the zarda industry in Kolkata, India.

This study was undertaken to assess the pulmonary and respiratory problems of workers in a zarda factory. A total of 70 permanent zarda workers (50 manufacturing workers and 20 office ones) were studied in a factory in Baguihati, Kolkata, India. The study included (a) completion of a questionnaire (on pulmonary and respiratory problems), (b) measurement of physical parameters, (c) spirometry and (d) measurement of peak expiratory flow rate. At the same time, the worksite was analyzed with an OSHA-recommended ergonomics checklist. Many zarda manufacturing workers complained of respiratory symptoms. Continuous exposure to the tobacco processing environment reduced the workers' lung volume and peak expiratory flow rates. Our study indicates that zarda manufacturing workers may have respiratory and pulmonary disorders related to exposure to tobacco dust in their work environment.     

Comparative assessment of respiratory and other occupational health effects among elementary workers

Objective. This study was conducted to assess hazards faced by elementary workers. Methods. A questionnaire survey and a respiratory function test (spirometry) were carried out on 150 respondents. Results. Major hazards identified related to sharp objects, heavy weight lifting, thermally harsh conditions, working at height, whole body vibration, chemicals, pathogens, increased noise levels and confined space entry. Workers suffered from upper and lower respiratory disorder symptoms, digestive problems, optical and musculoskeletal issues, etc. Spirometric measurement showed obstructive lung disorders to be highest among construction workers (CW) (48%) followed by sanitation workers (SW) (32%) and solid waste pickers (SWP) (28%). Restrictive lung pattern was dominant among SW (56%) followed by SWP (46%) and CW (42%). The observed FEV₁/FVC in diseased SWP, SW and CW ranged from 51 to 96%, from 52 to 98% and from 31 to 99% respectively while observed mean FEV₁ was 2.15, 1.79 and 1.70 L, respectively. Conclusion. The study findings show that occupational exposure can significantly influence respiratory system impairment and contribute to other ailments among elementary workers. The study recommends use of appropriate protective equipment and regular medical examination for early recognition of any health risk so that timely interventions for effective management may be undertaken.     

Occupational noise exposure and hearing defects among sawmill workers in the south of Thailand

The aim of this study was to investigate occupational noise exposure and hearing defects among sawmill workers in the south of Thailand. Seven hundred sawmill workers participated, of which 335 (47.9%) were male. The mean age of the sawmill workers was 33.5 years (SD 10.2), and more than 60% were <35 years old; 75.1% of the workers had less than 5 years of work experience. Only about one in four workers (25%) had been trained in use of personal protective equipment (PPE), and half of the participants never or rarely wore PPE while working. The prevalence rate of noise-induced hearing loss (NIHL) was 22.8% (N?=?42). Male workers had significantly higher risk than female workers (odds ratio [OR]?=?2.21). Workers aged older than 25 years had significantly higher risks for NIHL (OR?=?3.51–12.42) than workers younger than 25 years. Sawing workers had higher risk for NIHL than office workers (OR?=?3.07).     

Pulmonary Functions of Welders in Gas Transmission Pipelines in Iran

This study evaluated the influence of welding on pulmonary functions in welders. Spirometry tests were performed before and after work shift in 91 welders and 25 clerks (control group). We examined forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), FEV1/FVC ratio and forced expiratory flow 25%-75% (FEF 25–75). Significant differences were found for FVC and FEV1/FVC between welders and the control group in pre- and post-shift measurements (p < .001). In welders, smoking and nonsmoking habit had no significant effects on any pulmonary indices before or after shift. Work experience and fume concentrations also had no significant effects on the majority of spirometric indices (p > .05). Most welders had at least 1 of the respiratory symptoms. Significant differences were found between pre- and post-shift indices (as percentage of predicted values calculated with spirometer) and between the welders engaged in some welding tasks and the control group before work shift. This study documented work-related changes in pulmonary functions in the welders and marked drops in these functions without symptoms in some welders.     

Work-related musculoskeletal disorders among workers in an MDF furniture factory in eastern Thailand

The purpose of this study was to analyze the factors contributing to musculoskeletal disorders (MSDs) among 439 workers in an MDF furniture factory using questionnaires and the risk assessment form of the Ergonomic Assessment Tool for Arthritis technique to assess aspects of the workstations and working postures of jobs. With regard to factors that affected MSDs, it was found that workers older than 50 years were having knee symptoms: their adjusted odds ratio (aOR) was 18.49, 95% confidence interval (CI) [1.51, 226.40]. Those who had been working for 1–2 years were having neck pain symptoms: aOR 12.01, 95% CI [1.82, 79.43]. The recommendation of this study is that health monitoring should be provided for workers who have pain in various parts of their bodies, especially those who have been working for 6–10 years, and those who are over 50 years old with knee pain.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Validation of a questionnaire about the perception of occupational biohazard in Spanish companies

Objectives. The aim of this work was to develop, validate and test a new questionnaire to assess the biological risk in workers with intentional or unintentional exposure to biological agents. Methods. A questionnaire including 34 questions was developed to study the perception of workers against occupational biohazard. Content Validity Index (CVI) and Content Validity Ratio (CVR) were calculated for the analysis of content validity. A pilot study was carried out with 60 workers from 17 companies performing analysis of Cronbach's α to assess the internal consistency or reliability. Results. A total of 518 workers from 51 Spanish companies in which there is exposure to biological agents participated in the study yielding a response rate of 90%. The final questionnaire obtained a Cronbach's α > 0.759 with a stable test–retest result. The questionnaire validation demonstrates that it could be used to evaluate the biological risks and help the prevention of occupational accidents and diseases. Discussion. This study has validated the need to evaluate worker's perception against occupational risks, as well as the application of prevention methods and protective equipment. It is a first step towards developing an occupational biohazards assessment method including all the requirements set by the European Health and Safety Strategy 2013–2020.     

Attributes of Occupational Injury Among Workers in the Chemical Industry and Safety Issues

Case-study research was carried out with a view to find the attributes of occupational injury among workers in the chemical industry and to enhance safety issues. Injury data were collected and processed in terms of different variables, such as age, gender, skills, type of hazard, etc. Pareto analysis was then applied to find a pattern of occupational injury among the workers. The study revealed that 79.52% of the injured workers were in the 40–59 age group; 57.14% of accidents occurred during the 1st shift; 73.26% of accidents caused injury to hands, feet, chest to thigh, arms and eyes; and 70.93% of injuries were caused by pumps, carrying and lifting, vehicles, pipelines, valves, and grinding. Surprisingly, no one was injured in the group of temporary workers. The paper also provides specific suggestions followed by some action plans.     

Skin reactions to latex in dental professionals – first Croatian data

Purpose. To determine the prevalence of undesirable skin reactions to latex in dental professionals and students of the School of Dental Medicine in Zagreb, Croatia. Methods. Our research included 444 participants, of which 200 agreed to undergo a skin prick test (SPT). All participants answered a questionnaire in which we asked about incidence of skin lesions, duration of occupational exposure to latex, localization of skin lesions and symptoms. Statistical analysis of the questionnaire and test results was then carried out. Results. Of the total 444 participants surveyed, 249 (56.1%) reported lesions on their skin (professionals 64.8%, students 6.1–58.5%). From the questionnaire, 239 (96.0%) respondents reported lesions on the hands and fingers, mostly in the form of erythema (37.0%) and occasional dryness of skin (29.0%). Positive SPT results were found in 14 (7.0%) out of the 200 respondents who underwent the test. Conclusions. While a large number of subjects (56.1%) reported skin lesions when using latex products at their workplace, the SPT test was positive only in 7.0%. The results show that the prevalence of self-reported skin lesions was significantly related to the length of occupational exposure, with a substantial effect size (p?<?0.001; V?=?0.334).     

Decomposition analysis of the effects of vehicle safety technologies on the motor vehicle collision–related mortality rate from 1994 to 2015

Abstract

Objective: Though the mortality rate for motor vehicle collisions (MVCs) has been decreasing since the 1960s with the advent of the first federal seat belt laws in 1968, MVC remains a leading cause of death for individuals aged 1 to 44 years. The purpose of this study is to examine the effects of frontal (FABs) and side airbags (SABs) and electronic stability control (ESC) on the components of the MVC mortality rate.

Methods: The MVC mortality rate from 1994 to 2015 was separated into its components of exposure of vehicles, exposure of travel, collision density, injury incidence, and case fatality rate. Year was categorized on the availability of safety technology in vehicles: 1994–1997 (first-generation FABs mandated), 1998–2001 (sled-certified, second-generation FABs mandated), 2002–2006 (increasing prevalence of SABs and ESC), 2007–2011 (advanced airbags mandated), and 2012–2015 (ESC mandated, SAB in over 90% of vehicles, introduction of advanced safety systems). Relative contributions (RCs) of the components to changes in the MVC-related mortality rate were calculated as the absolute value of the component’s beta coefficient divided by the sum of the absolute values of all components’ beta coefficients. Negative binomial regression–estimated rate ratios (RRs) for the changes in the rate of each component by year category compared to the prior year category.

Results: Significant decreases in the MVC mortality rate were observed for 2007–2011 and 2012–2015. The decrease in 2007–2011 was due in most part to an 18% decrease in the injury incidence (RR?=?0.82, P?<?.0001, RC?=?63%), though there was a noted contribution by the decrease in vehicle miles traveled (RR?=?0.95, P?<?.0001, RC?=?15%). The continued decrease in mortality in 2012–2015 was due is most part to the 10% decreased case fatality rate (RR?=?0.90, P?<?.0001, RC?=?66%) because there was no significant change in the vehicle miles traveled and injury incidence.

Conclusions: The results of this study highlight the effects of vehicle safety technologies on the MVC-related mortality rate and can help direct prevention efforts. Through the study period, there was no meaningful contribution to decreases in the MVC-related mortality rate due to components related to exposure (i.e., vehicles per population and the rate of vehicle miles traveled), suggesting that prevention efforts at decreasing exposure prevalence would have little effect on the MVC-related mortality rate. Instead, prevention efforts should continue to focus on event-phase methods to decrease injury occurrence and mitigate injury severity during the collision.     

Assessment of the effect of welding fumes on welders’ cognitive failure and health-related quality of life

Introduction. This study examined whether cognitive symptoms and health-related quality of life can be affected by welding fume exposure. Method. Participants consisted of welders (n?=?40) and welder assistants (n?=?25) from welding units as the exposed group, and office workers (n?=?44) as the non-exposed group. All participants were studied using ambient air monitoring and two types of questionnaires: the Cognitive Failures Questionnaire (CFQ) and the 36-item Short Form Health Survey (SF-36). Results. Welders and welder assistants were exposed to higher concentrations of all airborne metals than office employees, except for aluminum and chromium (p?p?M (SD)?=?54.84 (17.88)). The relationships between total CFQ score and the measured concentration of nickel at peak work rate was significant for welders. Conclusion. Cognitive symptoms and health-related quality of life were not related to the measures of welding fume exposure and further research should be performed to find other influencing factors.     

Musculoskeletal Symptoms In Workers

Self-report measures of musculoskeletal discomfort are a widely used and generally accepted risk factor for musculoskeletal disorders in epidemiologic research. The aim of this study was to investigate the prevalence of musculoskeletal symptoms in packing workers. A cross-sectional study of 75 workers was carried out using a modified Nordic questionnaire. Prevalence was determined with the percentage of positive responses to questions on musculoskeletal symptoms. Odds ratios and 95% confidence intervals were the measures of association between prevalent musculoskeletal symptoms and demographic factors; they were determined with logistic regression. Most musculoskeletal symptoms in workers were from the low back (44.0%), shoulders (33.3%) and neck (32.0%). Years worked were strongly significantly associated with musculoskeletal symptoms and pain in the neck, shoulders and wrists/hands, P< .001-.050. Hazards related to repetitive movements and discomfort postures could be reduced with stretching exercises, rotation schedules and through new engineering solutions.     

Repeatability of electromyography normalization of the neck and shoulder muscles in symptomatic office workers

Purpose. The purpose of the study was to examine the repeatability of electromyography (EMG) normalization in office workers with neck and shoulder symptoms. Methods. Fifteen female office workers with neck/shoulder symptoms were recruited to participate in two separate days of testing. Maximum voluntary isometric contraction (MVIC) was used for the normalization of EMG data on the following muscles: cervical erector spinae, upper trapezius, lower trapezius and anterior deltoid. Repeatability was calculated using the intra-class correlation (ICC), relative standard error of measurement (%SEM) and relative coefficient of variation (%CV). Results. Peak root mean square (rms) and median frequency (MF) showed good to high repeatability in the UT, AD and CES (ICC?=?0.87–0.95, %SEM=?2.65–9.48, %CV=?0.2–5.9). The repeatability of peak rms was good (ICC?=?0.87, %SEM?=?12.56, %CV?=?3.3) and the MF of the LT was fair (ICC?=?0.76, %SEM?=?5.71, %CV?=?2.9). Conclusion. Peak rms and MF from the MVIC normalization method can be measured with sufficient repeatability in symptomatic office workers.     

Investigation of work-related musculoskeletal disorders among male kitchen workers in South India

Objective. This study aims to quantify the prevalence of work-related musculoskeletal disorders (MSDs) and risks among male kitchen workers in the catering industry. Method. Data were collected with the help of the Nordic musculoskeletal questionnaire and by direct observations. Results. In total, 114 male kitchen workers from various hostels of a college in South India were considered for this study. The average age and mean years of employment of the workers are 26.4 (SD 7.7) and 7.8 respectively. The statistical analysis carried out reveals that 67.5% of male kitchen workers reported MSDs during the past 12 months. The highest prevalence rate has been found in the lower back (65.8%) and shoulder region (62.3%). Among different categories of kitchen work analyzed, it is evident that chief cooks suffer more from MSDs (79.2%) than assistant cooks (74.3%) and kitchen aides (30.0%). Workers in the older group, i.e., ≥41 years, and workers with 6–10 years of experience suffer with higher risk of MSDs, i.e., 93.9% and 87.5%, respectively. Conclusion. The male kitchen workers who participated in this research were found to possess both MSDs and ergonomic hazards.     

Injuries among electric power industry workers, 1995–2013

IntroductionWorkers in the electric power industry face many risks of injury due to the high diversity of work tasks performed in potentially hazardous and unpredictable work environments.MethodWe calculated injury rates by age, sex, occupational group, and injury type among workers in the Electric Power Research Institute’s (EPRI) Occupational Health and Safety Database (OHSD), which contains recordable injury, medical claims, and personnel data from 18 participating electric power companies from 1995 to 2013.ResultsThe OHSD includes a total of 63,193 injuries over 1,977,436 employee-years of follow-up, for an overall injury rate of 3.20 injuries per 100 employee-years. Annual injury rates steadily decreased from 1995 to 2000, increased sharply in 2001, and subsequently decreased to their lowest rate of 1.31 injuries per 100 employee-years in 2013. Occupations with the highest injury rates were welders (13.56 per 100 employee-years, 95% CI 12.74–14.37), meter readers (12.04 per 100 employee-years, 95% CI 11.77–12.31), and line workers (10.37 per 100 employee-years, 95% CI 10.19–10.56). Males had an overall higher injury rate compared to females (2.74 vs. 1.61 per 100 employee-years) although some occupations, such as meter reader, had higher injury rates for females. For all workers, injury rates were highest for those in the 21 to 30 age group (3.70 per 100 employee-years) and decreased with age. Welders and machinists did not follow this trend and had higher injury rates in the 65 + age group. There were 63 fatalities over the 1995 to 2013 period, with 21 fatalities (33.3%) occurring among line workers.ConclusionsAlthough injury rates have decreased over time, certain high-risk groups remain (i.e., line workers, mechanics, young males, older welders and machinists, and female meter readers).Practical applicationsProtective measures and targeted safety programs may be warranted to ensure the safety of electric power workers.     

Prevalence of low back pain in three occupational groups in Shanghai, People's Republic of China

PROBLEM: Low back pain (LBP) is one of the most prevalent work-related conditions affecting employed populations in developed countries, yet little is known about this condition among the world's largest, single-nation labor force: The People's Republic of China. METHOD: This is a cross-sectional study of the prevalence of low back pain (LBP) among garment workers, battery/kiln workers, and teachers in Shanghai, People's Republic of China. Data were collected by personal interview and physical examination at six work sites. The overall response rate was 78%. RESULTS: The overall (N=383) self-reported annual prevalence of LBP symptoms lasting 24 hours or more was 50%. Garment workers had a higher annual prevalence of LBP (74%) than teachers (40%), prevalence ratio (PR=1.9, 95% CI=1.4-2.4). DISCUSSION: The overall annual prevalence of self-reported LBP (50%) was higher than that reported among 50 other Chinese employed study populations (30%). Healthy worker effects may have limited the conclusions from this cross-sectional study. SUMMARY: These results suggest that LBP is a prevalent condition in Chinese workers and that more work should be done to estimate its impact on the Chinese workforce. The findings for garment workers were consistent with increased risk of LBP among persons doing work in fixed, sedentary postures.     

The relationship of occupational injury and use of mental health care

Introduction: Symptoms of depression and anxiety are a common consequence of occupational injury regardless of its cause and type. Nevertheless, mental health care is rarely covered by workers’ compensation systems. The aim of this study was to assess the use of mental health care post-injury. Methods: We used a subsample of patient-care workers from the Boston Hospital Workers Health Study (BHWHS). We matched one injured worker with three uninjured workers during the period of 2012–2014 based on age and job title (nurse or patient-care associate) and looked at their mental health care use pre- and post-injury using medical claims data from the employer sponsored health plan. We used logistic regression analysis to assess the likelihood of mental health care use three and six months post-injury controlling for any pre-injury visits. Analyses were repeated separately by job title. Results: There were 556 injured workers between 2012 and 2014 that were matched with three uninjured workers at the time of injury (n = 1,649). Injured workers had a higher likelihood of seeking mental health care services than their uninjured counterparts during the six months after injury (OR = 1.646, 95% CI: 1.23–2.20), but not three months post-injury (OR = 0.825, 95% CI: 0.57–1.19). Patient-care associates had a higher likelihood to seek mental health care post-injury, than nurses (OR: 2.133 vs OR: 1.556) during the six months period. Conclusions: Injured workers have a higher likelihood to experience symptoms of depression and anxiety based on their use of mental health care post-injury and use is more predominant among patient-care associates; however, our sample has a small number of patient-care associates. Practical Applications: Treating depression and anxiety as part of the workers’ compensation system has the potential of preventing further physical ailment and improving the return to work process regardless of nature of injury.