废杂铜的再生及其环境污染与防治

随着我国废杂铜再生行业的快速发展,废杂铜在拆解和回收过程中环境污染问题日益突出,为了经济与环境的协调发展,介绍了我国废杂铜回收现状及工艺、国内外废杂铜再生特点和环境污染问题,并对其环境防治进行探讨.     

废电线缆再生铜资源化处理技术评述

我国再生铜产业已经成为中国有色金属工业的重要组成部分,极大地缓解了我国原生铜矿产资源不足的矛盾。我国废杂铜主要来源于国内回收和国外进口。进口含铜废料中,以回收铜为主的废电线电缆,约占进口总量的2/3。随着电子信息等科技产业的迅猛发展,废电线电缆再生铜资源化技术受到越来越多的关注。目前资源化综合利用废电线电缆的主要技术有机械处理技术、热回收处理技术、化学处理技术、低温冷冻处理技术、超声波分离回收技术和高压水射流回收技术。综述了各种方法和工艺的特点以及技术研究现状。     

氧化还原法处理有机硅废触体

有机硅是以硅氧为主链 ( - O- Si- O- )的半无机高分子化合物。在其生产中未反应硅粉和催化剂的混合物称为废触体 ,主要成分为硅粉、铜、碳和水等。目前 ,国外生产 1 0 0 kg有机氯硅烷产生废触体3.5 kg,且得到了很好的治理 ,而我国则为 1 0～ 1 1kg,尚未得到妥善处理。国内年产废触体约 1 40 0 t,若能回收利用 ,有着可观的经济效益和社会效益。针对这种情况我们对某厂的废触体的处理进行了研究。有机硅废触体的处理方法主要有 :( 1 )氧化还原法回收单质铜 ;( 2 )利用废触体合成苯基单体 ;( 3)回收二价铜盐 ;( 4 )利用硅粉合成四氯化硅。由…     

生活垃圾分类背景下对广州市废玻璃回收利用的思考

废玻璃是一种载能节能、低碳环保、可重复利用和再生利用的再生资源,广州市通过补贴政策、两网融合等手段,促进废玻璃回收利用,随着生活垃圾分类纵深推进,为了进一步提高废玻璃回收利用,从废玻璃回收利用现状入手,对比了北京、上海生活垃圾中废弃玻璃的占比情况,针对目前存在问题,提出废玻璃回收利用分析与建议。     

简讯

再生铜杆业标准有望出台多数或出局再生铜杆行业标准目前已由专家委员会审核通过,并送交工信部,行业标准有望近期出台。该标准和世界先进水平同步,业内只有少数几家企业达标,多数或出局。由于废杂铜直接生产精炼铜杆有很好的经济效益,因此近年来该行业发展十分迅速。据上海有色网(SMM)了解,目前国内以废杂铜为原料生产铜杆的生产线超过80条,每年有     

废聚酯瓶的回收和再生利用

概述了我国废聚酯(PET)瓶的回收现状,总结了化学法和物理法回收废PET瓶的方法,介绍了欧美国家研究开发的废PET瓶再生利用新技术,分析了我国废PET瓶再生利用存在的问题。建议政府职能部门充分发挥自己的作用,通过制定相关的政策和法规,鼓励企业用循环经济的思维来开展废PET瓶的再生利用工作。     

废聚苯乙烯的化学回收方法

废聚乙烯（ＰＳ）转化为燃料油和化学品的化学回收方法,分为废ＰＳ单独裂解及废ＰＳ与其它废塑料混合裂解两种方式,分别阐述了两种回收方式的研究成果和工艺现状,并就存在的问题进行了讨论。     

单液型酸性铜蚀刻液的循环再生与铜回收新工艺开发

PCB生产过程中的蚀刻液在使用后会产生大量的铜废水,若直接排放不仅会造成严重的资源浪费,还会带来严重的环境污染。因此,对蚀刻液进行循环再生及铜回收是一项节约成本、降低污染的措施。传统的蚀刻液循环再生及铜回收工艺一般采用双液型酸性蚀刻液,且工艺回收利用效果不足,资源浪费严重。本工艺设计采用单液型酸性蚀刻液作为生产线蚀刻液,利用隔膜电解技术对废蚀刻液进行循环再生及铜回收,通过对生产线中ORP值(氧化还原电位)和铜含量比重进行监控,对不同ORP值废蚀刻液进行电解处理和调配,可直接循环再生回到生产线形成再生液。该项工艺设计中设定蚀刻液的工作ORP值为480～600 mv,铜含量比重为1.25～1.35。通过实验检测提铜处理前的蚀刻液铜含量为55 050 mg/kg,提铜处理后的蚀刻液铜含量为7 551 mg/kg,铜回收率达到86.28%。该工艺不仅有效提高了工作效率和废液循环再生利用,降低环境污染,而且具有重要的理论与应用价值。     

用废杂铜制备碱式碳酸铜

以废杂铜为原料，用稀硝酸浸出硝酸铜溶液，与碳酸氢钠反应得到碱式碳酸铜粗品，漂洗后得到高纯度碱式碳酸铜。实验结果表明，废杂铜与质量分数为30％的硝酸反应，开始比较平缓，后期反应剧烈，有少量红棕色的NO：生成，采用碱液吸收方式处理生成的NO：可减少其对大气的污染。碳酸氢钠与硝酸铜进行合成反应，反应温度50～80℃，反应液pH6．5～7．0，产品中铜的质量分数为55％-56％，产品质量较好。     

从废印制电路板中提取金的研究

废印制电路板体量巨大,其中含有较高品位的金,对废印制电路板中的贵金属加以回收具有很大的经济效益和环境效益。项目研究对象为经破碎分选后的废印制电路板并使用H_2O_2-H_2SO_4体系浸出铜之后的浸铜渣。通过实验,确定浸出和回收金的最佳反应条件。结果显示,金的直收率达到99%,熔铸的金锭纯度达到99.9%。     

加快发展循环经济 打造一流铜深加工企业

详细介绍山东天圆铜业有限公司为增强企业的竞争力,加快发展循环经济,精心打造高起点、高水平的资源循环利用示范园区和一流的铜加工企业,对企业未来5年打造成为集废旧金属进口、拆解加工、再生铜生产、电解铜生产、高精尖铜材深加工的循环经济产业集团设立目标,为全国城市矿产示范基地的建设提供借鉴。     

Characterization of shredded television scrap and implications for materials recovery

Characterization of TV scrap was carried out by using a variety of methods, such as chemical analysis, particle size and shape analysis, liberation degree analysis, thermogravimetric analysis, sink-float test, and IR spectrometry. A comparison of TV scrap, personal computer scrap, and printed circuit board scrap shows that the content of non-ferrous metals and precious metals in TV scrap is much lower than that in personal computer scrap or printed circuit board scrap. It is expected that recycling of TV scrap will not be cost-effective by utilizing conventional manual disassembly. The result of particle shape analysis indicates that the non-ferrous metal particles in TV scrap formed as a variety of shapes; it is much more heterogeneous than that of plastics and printed circuit boards. Furthermore, the separability of TV scrap using density-based techniques was evaluated by the sink-float test. The result demonstrates that a high recovery of copper could be obtained by using an effective gravity separation process. Identification of plastics shows that the major plastic in TV scrap is high impact polystyrene. Gravity separation of plastics may encounter some challenges in separation of plastics from TV scrap because of specific density variations.     

废钢铁在钢铁行业中应用前景研究

废钢铁是我国物资回收与再生资源利用体系中的重要资源,也是非常重要的战略性资源,是钢铁工业最主要的两种原料之一(另一种是铁矿石)。与铁矿石相比,废钢铁更符合绿色可持续发展的需要和钢铁行业超低排放政策的要求,未来废钢铁资源在钢铁工业发展中的重要性可能会不断提升。着重探讨了未来10年废钢铁资源产生量的变化趋势,以及对钢铁工业原料结构变化的影响。未来中国的废钢铁资源可能不仅能满足自身钢铁工业发展的需要,同时也可能为世界钢铁工业的发展提供重要的原料。     

Printed wiring boards for mobile phones: characterization and recycling of copper

The popularization of mobile phones, combined with a technological evolution, means a large number of scrap and obsolete equipment are discarded every year, thereby causing economic losses and environmental pollution. In the present study, the printed wiring boards scrap of mobile phones were characterized in order to recycle some of the device components, using techniques of mechanical processing, hydrometallurgy and electrometallurgy. The use of the techniques of mechanical processing (milling, particle size classification, magnetic and electrostatic separation) was an efficient alternative to obtain a concentrated fraction (mainly iron in the magnetic fraction and copper in the conductive fraction) and another fraction containing polymers and ceramics. At the end of mechanical processing, a concentrated fraction of metals could be obtained with an average concentration of 60% copper. This concentrated fraction in metals was dissolved in aqua regia and sent to electrowinning to recover 92% of the dissolved copper. The obtained cathodes have a copper content above 95%, which demonstrates the technical feasibility of recovery of copper using the techniques of mechanical processing, hydrometallurgy and electrometallurgy.     

Comparisons of four categories of waste recycling in China's paper industry based on physical input-output life-cycle assessment model

Waste recycling for paper production is an important component of waste management. This study constructs a physical input-output life-cycle assessment (PIO-LCA) model. The PIO-LCA model is used to investigate environmental impacts of four categories of waste recycling in China’s paper industry: crop straws, bagasse, textile wastes and scrap paper. Crop straw recycling and wood utilization for paper production have small total intensity of environmental impacts. Moreover, environmental impacts reduction of crop straw recycling and wood utilization benefits the most from technology development. Thus, using crop straws and wood (including wood wastes) for paper production should be promoted. Technology development has small effects on environmental impacts reduction of bagasse recycling, textile waste recycling and scrap paper recycling. In addition, bagasse recycling and textile waste recycling have big total intensity of environmental impacts. Thus, the development of bagasse recycling and textile waste recycling should be properly limited. Other pathways for reusing bagasse and textile wastes should be explored and evaluated. Moreover, imports of scrap paper should be encouraged to reduce large indirect impacts of scrap paper recycling on domestic environment.     

Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.     

失效动力锂离子电池再利用和有用金属回收技术研究

动力锂离子电池以其贮电能力大、充放电速度快等优点被广泛应用在电动汽车上,近年来失效电动汽车动力锂离子电池报废量不断增加,但未得到有效处理回收,造成了巨大的资源浪费和环境污染.失效电池还有80％左右的容量可以使用,可以在场地车或者储能电站进行再利用,以达到材料和电池的最大利用率;同时电池中含有多种有用金属（如Co,Al,Ni,Li等）且相对含量较高,极具回收价值.针对失效动力锂离子电池的再利用和有用金属的各种回收方法进行了评述.     

加快废钢产业发展 促进钢铁资源循环利用

分析了废钢的应用现状及应用不足的原因，为加快废钢产业发展提出建议。提出为适应当今钢铁工业节能、降耗、环保等方面的发展要求，应大力发展废钢产业，加快废钢资源利用，促进钢铁资源循环利用，实现我国钢铁工业的可持续发展．     

国内废钢行业概况及废钢价格关联因素的量化研究

介绍了"十五"和"十一五"时期国内废钢行业发展概况,重点阐述废钢行业的回收供应以及消耗情况,并对影响废钢价格的因素进行数学建模,对关联程度大小进行量化,对更好地分析废钢市场走势有较好的指导意义。     

浅议碳排放与废钢铁的节能减排功效

二氧化碳是导致全球气候变暖、人类生存环境恶化的主要原因。简要介绍世界钢铁工业二氧化碳排放情况,针对我国钢铁工业碳排放的具体情况,提出发展我国废钢产业,提高废钢铁的供应能力,是我国钢铁工业摆脱危机,实现低碳发展、绿色发展的主要途径。