Bankfull Regional Curves for the Alleghany Plateau/Valley and Ridge,Piedmont, and Coastal Plain Regions of Maryland

Regional curves are empirical relationships that can help identify the bankfull stage in ungaged watersheds and aid in designing the riffle dimension in stream restoration projects. Bankfull regional curves were developed from gage stations with drainage areas less than 102 mi² (264.2 km²) for the Alleghany Plateau/Valley and Ridge (AP/VR), Piedmont, and Coastal Plain regions of Maryland. The AP/VR regions were combined into one region for this project. These curves relate bankfull discharge, cross‐sectional area, width, and mean depth to drainage area within the same hydro‐physiographic region (region with similar rainfall/runoff relationship). The bankfull discharge curve for the Coastal Plain region was further subdivided into the Western Coastal Plain (WCP) and Eastern Coastal Plain (ECP) region due to differences in topography and runoff. Results show that the Maryland Piedmont yields the highest bankfull discharge rate per unit drainage area, followed by the AP/VR, WCP, and ECP. Likewise, the Coastal Plain and AP/VR streams have less bankfull cross‐sectional area per unit drainage area than the Piedmont. The average bankfull discharge return interval across the three hydro‐physiographic regions was 1.4 years. The Maryland regional curves were compared to other curves in the eastern United States. The average bankfull discharge return interval for the other studies ranged from 1.1 to 1.8 years.     

Lateral Hyporheic Zone Chemistry in an Artificially Constructed Gravel Bar and a Re‐Meandered Stream Channel,Southern Ontario,Canada1

Abstract: The effect of stream restoration on hyporheic functions has been neglected, although channel rehabilitation projects have a potential to alter stream‐ground‐water interactions. The present study examined the effect of an artificially constructed gravel bar and re‐meandered stream channel on lateral hyporheic exchange flow and chemistry in two lowland N‐rich streams in southern Ontario, Canada. Nitrate concentrations were relatively high, ranging from 0.5 to 1.3 mg N/l in both streams during spring through fall months. However, nitrate concentrations showed a steep decline as stream water entered the gravel bar and the meander bends. Differences between observed and predicted nitrate concentrations based on conservative ion concentration patterns indicated that 40‐100 and 68‐98% of the nitrate entering the hyporheic zone was removed in the gravel bar and meanders, respectively. Rapid depletion of dissolved oxygen concentrations along lateral hyporheic flow paths and denitrifying potentials assayed by the acetylene block technique in hyporheic sediments suggests that denitrification was an important mechanism of nitrate depletion. Despite the high rate of nitrate removal, the flux of stream water laterally entering the constructed gravel bar and meander bends was very small, and hyporheic nitrate removal was <0.015% of the daily stream load during base‐flow periods in summer and fall. The effects of restoration projects on hyporheic zone dynamics are often limited in lowland streams by low channel gradients and fine floodplain sediments with low interstitial flows that restrict the magnitude of the stream‐hyporheic connection.     

QUANTIFICATION OF INCISED CHANNEL EVOLUTION AND EQUILIBRIUM1

ABSTRACT: Incised channels are caused by an imbalance between sediment transport capacity and sediment supply that alters channel morphology through bed and bank erosion. Consistent sequential changes in incised channel morphology may be quantified and used to develop relationships describing quasi‐equilibrium conditions in these channels. We analyzed the hydraulic characteristics of streams in the Yazoo River Basin, Mississippi in various stages of incised channel evolution. The hydraulic characteristics of incising channels were observed to follow the sequence predicted by previous conceptual models of incised channel response. Multiple regression models of stable slopes in quasi‐equilibrium channels that have completed a full evolutionary sequence were developed. These models compare favorably with analytical solutions based on the extremal hypothesis of minimum stream power and empirical relationships from other regions. Appropriate application of these empirical relationships may be useful in preliminary design of stream rehabilitation strategies.     

Improving the Urban Stream Restoration Effort: Identifying Critical Form and Processes Relationships

Stream restoration projects are often based on morphological form or stream type and, as a result, there needs to be a clear tie established between form and function of the stream. An examination of the literature identifies numerous relationships in naturally forming streams that link morphologic form and stream processes. Urban stream restoration designs often work around infrastructure and incorporate bank stabilization and grade control structures. Because of these imposed constraints and highly altered hydrologic and sediment discharge regimens, the design of urban channel projects is rather unclear. In this paper, we examine the state of the art in relationships between form and processes, the strengths and weaknesses of these existing relationships, and the current lack of understanding in applying these relationships in the urban environment. In particular, we identify relationships that are critical to urban stream restoration projects and provide recommendations for future research into how this information can be used to improve urban stream restoration design. It is also suggested that improving the success of urban restoration projects requires further investigation into incorporating process-based methodologies, which can potentially reduce ambiguity in the design and the necessity of using an abundant amount of in-stream structures.     

Integrating channel design and assessment methods based on sediment transport capacity in gravel bed streams

Natural channel design (NCD) and analytical channel design (ACD) are two competing approaches to stable channel design that share fundamental similarities in accounting for sediment transport processes with designs based on hybrid fluvial geomorphology and hydraulic engineering methods. In this paper, we highlight the linkage between ACD's capacity/supply ratio (CSR) and NCD's sediment capacity models (FLOWSED/POWERSED), illustrating how ACD and NCD have reached a point of convergent evolution within the stream restoration toolbox. We modified an existing CSR analytical spreadsheet tool which enabled us to predict relative channel stability using both conventional bed load transport equations and regional sediment regression curves. The stable channel design solutions based on measured data most closely matched the Parker (ACD) and/or Pagosa good/fair (NCD) relationships, which also showed the greatest CSR sensitivity in response to channel alterations. We found that CSR differences among the transport relationships became more extreme the further the design width deviated from the supply reach, suggesting that a stable upstream supply reach may serve as the best design analog. With this paper, we take a step toward resolving lingering controversy in the field of stream restoration, advancing the science and practice by reconciling key differences between ACD and NCD in the context of reach scale morphodynamics.     

MODELING THE LONG TERM IMPACTS OF USING RIGID STRUCTURES IN STREAM CHANNEL RESTORATION1

Abstract: Natural channel designs often incorporate rigid instream structures to protect channel banks, provide grade control, promote flow deflection, or otherwise improve channel stability. The long term impact of rigid structures on natural stream processes is relatively unknown. The objective of this study was to use long term alluvial channel modeling to evaluate the effect of rigid structures on channel processes and assess current and future stream channel stability. The study was conducted on Oliver Run, a small stream in Pennsylvania relocated due to highway construction. Field data were collected for one year along the 107 m reach to characterize the stream and provide model input, calibration, and verification data. FLUVIAL-12 was used to evaluate the long term impacts of rigid structures on natural channel adjustment, overall channel stability, and changing form and processes. Based on a consideration of model limitations and results, it was concluded that the presence of rigid structures reduced channel width-to-depth ratios, minimized bed elevation changes due to long term aggradation and degradation, limited lateral channel migration, and increased the mean bed material particle size throughout the reach. Results also showed how alluvial channel modeling can be used to improve the stream restoration design effort.     

USING TECHNICAL ADAPTIVE MANAGEMENT TO IMPROVE DESIGN GUIDELINES FOR URBAN INSTREAM STRUCTURES1

ABSTRACT: Adaptive management is a heuristic approach to treating stream restoration projects as continuous, cyclic experiments, yielding results to be incorporated into future decisions. This comprehensive assessment views failures as surprises that are valuable lessons. Monitoring, evaluation of data, and communication of results are critical; the monitoring results trigger feedback mechanisms to invoke adaptation to the newly acquired information and communication of new hypotheses, treatments, or policies. The principles of adaptive management were applied to a monitoring study of three urban stream restoration sites in Maryland. Data were collected and evaluated for various restoration techniques, including vanes, cross vanes, step pools, root wads, imbricated riprap walls, and coir fiber rolls. Improvements to the existing Maryland design guidelines and policies were developed as the feedback mechanism. With the increasing application of adaptive management in stream restoration efforts, it is likely that repeated failures will be prevented and future restoration projects will be more successful in achieving their goals.     

ALTERNATIVE APPROACH TO THE FORMULATION OF BASIN HYDRAULIC GEOMETRY EQUATIONS1

ABSTRACT: Along a drainage network, there is a systematic variation of average flow parameters (width, depth, and velocity) at flows having the same flow duration. Hydraulic geometry equations mathematically express this interdependent relationship of stream-flow characteristics for a basin for annual flow durations varying from 10 to 90 percent. However, the equations proposed so far have had rather poor predictive performance for low flows. An independent investigation of the variation of discharge with drainage area and annual flow duration demonstrates a consistent relationship between these parameters. The relationship for the high to median-flow range differs, however, from that for the median— to low-flow range. The proposed equations provide a better predictive performance for low flows than previous formulations and a versatile means of estimating flow parameters for streams throughout a basin. The improved basin hydraulic geometry equations have a wide range of applications in areas such as stream habitat assessment, water quality modeling, channel design, and stream restoration projects.     

Design of Experimental Streams for Simulating Headwater Stream Restoration1

Huang, Jung-Chen, William J. Mitsch, and Andrew D. Ward, 2010. Design of Experimental Streams for Simulating Headwater Stream Restoration. Journal of the American Water Resources Association (JAWRA) 1-15. DOI: 10.1111/j.1752-1688.2010.00467.x Abstract: Headwater streams flowing through agricultural fields in the midwestern United States have been extensively modified to accommodate subsurface drainage systems, resulting in deepened, straightened, and widened streams. To restore these headwater streams, partial or total reconstruction of channels is frequently attempted. There are different approaches to reconstructing the channel, yet there is little evidence that indicates which promises more success and there has been no experimental work to evaluate these approaches. This study designs three experimental channels – two-stage, self-design, and straightened channels – on a human-created swale at the Olentangy River Wetland Research Park, Columbus, Ohio, for long-term evaluation of headwater stream evolution after restoration. The swale receives a continuous flow of pumped river water from upstream wetlands. Using streamflow and stage data for the past 12 years, a channel-forming discharge of 0.18 m³/s was estimated from bankfull discharge, effective discharge, and recurrence interval. These stream channels, after construction, will be monitored to evaluate physical, chemical, and biological responses to different channels over a decade-long experiment. We hypothesize that the three stream restoration designs will eventually evolve to a similar channel form but with different time periods for convergence. Monitoring the frequency and magnitude of changes over at least 10 years is needed to document the most stable restored channel form.     

CHANNEL FORM AND STREAM ECOSYSTEM MODELS1

A system is proposed to classify running water habitats based on their channel form which can be considered in three different sedimentological settings: a cobble and boulder bed channel, a gravel bed channel, or a sand bed channel. Three physical factors (relief, lithology, and runoff) are selected as state factors that control all other interacting parameters associated with channel form. When these factors are integrated across the conterminous United States, seven distinct stream regions are evident, each representing a most probable succession of channel forms downstream from the headwaters to the mouth. Coupling these different channel profiles with typical biotic community structures usually associated with each of the channel types should result in considerable refinement of the applicability of the River Continuum Concept and other holistic ecosystem models by realizing the nonrandomness of the effects of geo-morphology on stream ecosystems. Thus, this regional perspective of streams should serve to make persons concerned with water resources more aware of the geographical considerations that affect their study areas.     

USING MARYLAND'S STREAM CORRIDOR ASSESSMENT SURVEY TO PRIORITIZE WATERSHED RESTORATION EFFORTS1

ABSTRACT: The Stream Corridor Assessment survey has been developed by the Maryland Department of Natural Resources as a watershed management tool to identify environmental problems and to help prioritize restoration opportunities on a watershed basis. Potential environmental problems commonly identified during the survey include: stream channel alterations, excessive bank erosion, exposed pipes, inadequate stream buffers, fish migration blockages, trash dumping sites, near stream construction, pipe outfalls, and unusual conditions. In addition, the survey records information on the location of potential wetlands creation sites and collects data on the general condition of instream and riparian habitats. Over the past several years, in collaboration with the Maryland Conservation Corps, watershed associations, and local governments, more than 3,293 km (2,046 miles) of Maryland streams have been surveyed. Overall, the survey has proven to be a cost effective starting point for many watershed restoration efforts.     

A PROGRAM TO CALCULATE CHANNEL SCOUR AND FILL1

ABSTRACT: A computer program written in BASIC calculates net changes in stream channel cross-sections. Calculations are based on dividing the channel cross-section into discrete regions of scour and fill. Internal boundaries of these regions (along the x-axis of the cross-section) are determined by the location of vertical depth measurements taken at two distinct times. The right and left boundaries of the cross-section can be specified so that scour or fill can be calculated for any portion of the profile desired.     

A Sediment Budget for an Urbanizing Watershed, 1951‐1996, Montgomery County, Maryland,U.S.A.1

Abstract: Despite widespread interest, few sediment budgets are available to document patterns of erosion and sedimentation in developing watersheds. We assess the sediment budget for the Good Hope Tributary, a small watershed (4.05 km²) in Montgomery County, Maryland, from 1951‐1996. Lacking monitoring data spanning the period of interest, we rely on a variety of indirect and stratigraphic methods. Using regression equations relating sediment yield to construction, we estimated an upland sediment production of 5,700 m³ between 1951 and 1996. Regression equations indicate that channel cross‐sectional area is correlated with the extent of development; these relationships, when combined with historical land use data, suggest that upland sediment yield was augmented by 6,400 m³ produced by enlargement of first‐order and second‐order stream channels. We used dendrochronology to estimate that 4,000 m³ of sediment was stored on the floodplain from 1951‐1996. The sediment yield from the watershed, obtained by summing upstream contributions, totals 8,100 m³ of sediment, or 135 tons/km²/year. These results indicate that upland erosion, channel enlargement, and floodplain storage are all significant components of the sediment budget of our study area, and all three are approximately equal in magnitude. Erosion of “legacy” floodplain sediments originally deposited during poor agricultural practices of the 19th and early 20th Centuries has likely contributed between 0 and 20% of the total sediment yield, indicating that these remobilized deposits are not a dominant component of the sediment yield of our study area.     

Evaluating the Slope‐Area Method to Accurately Identify Stream Channel Heads in Three Physiographic Regions

Estimation of stream channel heads is an important task since ephemeral channels play a significant role in the transport of sediment and materials to perennial streams. The slope‐area method utilizes digital elevation model (DEM) and related information to develop slope‐area threshold relationships used to estimate the position of channel heads in the watershed. A total of 162 stream channel heads were mapped across the three physiographic regions of Alabama, including the Southwestern Appalachians (51), Piedmont/Ridge and Valley (61), and Coastal Plains (51). Using Geographic Information System and DEM, the local slope and drainage area for each mapped channel head was calculated and region‐specific models were developed and evaluated. Results demonstrated the local slope and drainage area had an inverse and strong correlation in the Piedmont/Ridge and Valley region (r² = 0.71) and the Southwestern Appalachian region (r² = 0.61). Among three physiographic regions, the weakest correlation was observed in the Coastal Plain region (r² = 0.45). By comparing the locations of modeled channel heads to those located in the field, calculated reliability and sensitivity indices indicated model accuracy and reliance were weak to moderate. However, the slope‐area method helped define the upstream boundaries of a more detailed channel network than that derived from the 1:24,000‐scale National Hydrography Dataset, which is commonly used for planning and regulatory purposes.     

Bankfull Regional Curves for North and Northwest Florida Streams1

Abstract: Regional curves, which relate bankfull channel dimensions and discharge to watershed drainage area, are developed to aid in identifying the bankfull stage in ungaged watersheds, and estimating the bankfull discharge and dimensions for river studies and natural channel design applications. This study assessed 26 stable stream reaches in two hydro‐physiographic regions of the Florida Coastal Plain: the Northwest Florida Coastal Plain (NWFCP) and the North Florida Coastal Plain (NFCP). Data from stream reaches in Georgia and Alabama were also used to develop the Florida regional curves, since they are located in the same hydro‐physiographic region. Reaches were selected based on the presence of U.S. Geological Survey gage stations and indicators of limited watershed development (e.g., <10% impervious surface). Analyses were conducted to determine bankfull channel dimensions, bankfull discharge, average channel slope, and Rosgen stream classification. Based on these data, significant relationships were found between bankfull cross‐sectional area, width, mean depth, and discharge as a function of drainage area for both regions. Data from this study suggested that bankfull discharges and channel dimensions were larger from NWFCP streams than from Coastal Plain streams in North Carolina and Maryland. Bankfull discharges were similar between NFCP and Georgia coastal plain streams; therefore, the data were combined into one regional curve. In addition, the data were stratified by Rosgen stream type. This stratification strengthened the relationships of bankfull width and mean depth as a function of drainage area.     

EVALUATION OF URBAN STREAM CORRIDOR RESTORATION DESIGN ALTERNATIVES USING HEC-21

ABSTRACT: The rehabilitation of urban stream channels and riparian areas involves a potentially large number of design alternatives. When substantial modifications are planned, water surface profile models (e.g., HEC-2) provide a means for a thorough and efficient evaluation of many design variations. The rehabilitation of a reach of Paradise Creek, Idaho, utilized the REC-2 model to verify the appropriateness of a new channel geometry and explore the consequences of variable floodplain geometries and excavation depths. The desirability of habitat diversity, coupled with the constraints of minimized earthwork costs and adequate flow capacity, framed the floodplain design question. The final design geometry was iteratively approached using the HEC-2 model to mimic the existing channel capacity. This modeling framework produces as output computed water surface elevations for the design channel and floodplain under any discharge. Hence, the method provides the means for demonstrating that rehabilitation designs will (or will not) cause increases in flood elevations, an assessment that is generally required for project approval.     

HYDRAULIC GEOMETRY AND STREAM CHANNEL BEHAVIOR: A UNCERTAIN LINK1

ABSTRACT: The at-a-station hydraulic geometry of stream channels can serve as a predictor of alluvial stream channel behavior. This geometry is the empirical relations describing changes in water surface width, mean depth, and mean velocity with changing discharge. The exponent values are correlated with channel morphology and behavior such as scour and fill, flow resistance, bank resistance, and competence. Channel behavior and morphology are apparently related, but some causes for effects are uncertain. Several studies, using empirical and theoretical bases, are reviewed here to illustrate the relation between hydraulic geometry and channel behavior, but the relations are not always consistent. Hydraulic geometry variables are easy to measure and readily available, but they do not always reflect what may be more important ones such as turbulence, the velocity distribution profile, and distribution and cohesion of sediment particles. This paper illustrates some of these problems, provides some solutions, and addresses need for more work to better predict stream channel behavior from hydraulic geometry     

INCORPORATING UNCERTAINTY IN THE DESIGN OF STREAM CHMNEL MODIFICATIONS1

ABSTRACT: The designs of stream channel naturalization, rehabilitation, and restoration projects are inherently fraught with uncertainty. Although a systematic approach to design can be described, the likelihood of success or failure of the design is unknown due to uncertainties within the design and implementation process. In this paper, a method for incorporating uncertainty in decision‐making during the design phase is presented that uses a decision analysis method known as Failure Modes and Effects Analysis (FMEA). The approach is applied to a channel rehabilitation project in north‐central Pennsylvania. FMEA considers risk in terms of the likelihood of a component failure, the consequences of failure, and the level of difficulty required to detect failure. Ratings developed as part of the FMEA can provide justification for decision making in determining design components that require particular attention to prevent failure of the project and the appropriate compensating actions to be taken.