Decolorization of azo dye reactive black B by Bacillus cereus strain HJ-1

Reactive black B (RBB) is a group of azo dyes that are widely used in the textile industry. In this study, a new microbial strain was isolated from azo dye contaminated river sediment which is capable of degrading RBB. The strain was identified as Bacillus cereus strain HJ-1 by 16S rRNA gene sequences analysis. The optimal conditions for RBB decolorization by B. cereus strain HJ-1 are: 25 °C, pH 8, 1 CMC of triton X-100, 0.15 g L^?1 of added yeast extract, 0.125 g L^?1 of added glucose and static culture. Then the toxicity of RBB on the green algae Chlorella vulgaris was determined. The results showed that the median effective concentration (EC₅₀) of RBB for C. vulgaris is 48 mg L^?1 and toxicity will really decrease after decolorization. In the end, B. cereus strain HJ-1 was amended into the origin river sediment and analyzed the whole microbial community structure of river sediment samples by PCR-DGGE technique. The result showed that B. cereus strain HJ-1 could survive in the river sediment after 12 d of incubation. Based on this work, we hope that these findings could provide some useful information for applying the decolorization of RBB in our environment.     

Fate of caffeine in mesocosms wetland planted with Scirpus validus

Uptake, accumulation and translocation of caffeine by Scirpus validus grown in hydroponic condition were investigated. The plants were cultivated in Hoagland’s nutrient solution spiked with caffeine at concentrations of 0.5–2.0 mg L^?1. The effect of photodegradation on caffeine elimination was determined in dark controls and proved to be negligible. Removal of caffeine in mesocosms without plants showed however that biodegradation could account for about 15–19% of the caffeine lost from solutions after 3 and 7 d. Plant uptake played a significant role in caffeine elimination. Caffeine was detected in both roots and shoots of S. validus. Root concentrations of caffeine were 0.1–6.1 μg g^?1, while the concentrations for shoots were 6.4–13.7 μg g^?1. A significant (p < 0.05) positive correlation between the concentration in the root and the initial concentrations in the nutrient solution was observed. The bioaccumulation factors (BAFs) of caffeine for roots ranged from 0.2 to 3.1, while BAFs for shoots ranged from 3.2 to 16.9. Translocation from roots to shoots was the major pathway of shoot accumulation. The fraction of caffeine in the roots as a percentage of the total caffeine mass in solution was limited to 0.2–4.4% throughout the whole experiment, while shoot uptake percentage ranged from 12% to 25% for caffeine at the initial concentration of 2.0 mg L^?1 to 50–62% for caffeine at the initial concentration of 0.5 mg L^?1. However, a marked decrease in the concentration of caffeine in the shoots between d-14 and d-21 suggests that caffeine may have been catabolized in the plant tissues subsequent to plant uptake and translocation.     

Effects of aqueous stable fullerene nanocrystals (nC60) on Daphnia magna: Evaluation of sub-lethal reproductive responses and accumulation

Concerns exist regarding the inadvertent release of engineered nanomaterials into natural systems, and the possible negative ecosystem response that may occur. Understanding sub-lethal effects may be particularly important to determining ecosystem responses as current levels of nanomaterial release are low compared to levels projected for the future. In this work, the sub-lethal effects and bioaccumulation of water stable, nanocrystalline fullerenes as C₆₀, (termed nC₆₀) were studied in Daphnia magna, a globally distributed, parthenogenetic zooplankton. Sub-lethal concentrations were first determined for both mature mother (LD₅₀ = 0.4 mg L⁻¹) and neonate (gestating) daphnids (0.2 mg L⁻¹) in standard 48 h exposure tests. Subsequent experiments focused on the accumulation and effects (at temperatures of 18–28 °C) of nC₆₀, during the D. magna reproductive cycle. The results demonstrate that upon sub-lethal exposure, the mortality rates of gestating daphnids increased with time and developmental stage. The maturation of daughter daphnids was negatively impacted. The mother daphnids were unable to reproduce again after exposure during pregnancy, and differential bioaccumulation occurred as a function of lipid content in the daphnia with the highest accumulation level of 7000 mg kg⁻¹ wet weight. Taken together, these results not only describe the accumulation and sub-lethal effects of nC₆₀ on exposed daphnia, but also highlight the importance of sub-lethal exposure scenarios, which are critical to fully understanding the potential impact of fullerenes and other engineered nanoscale materials on natural systems.     

Measurement and analysis of atmospheric ammonia emissions from anaerobic lagoons

Ammonia-nitrogen flux (NH₃-N=(14/17)NH₃) was determined from six anaerobic swine waste storage and treatment lagoons (primary, secondary, and tertiary) using the dynamic chamber system. Measurements occurred during the fall of 1998 through the early spring of 1999, and each lagoon was examined for approximately one week. Analysis of flux variation was made with respect to lagoon surface water temperature (∼15 cm below the surface), lagoon water pH, total aqueous phase NH_x(=NH₃+NH₄⁺) concentration, and total Kjeldahl nitrogen (TKN). Average lagoon temperatures (across all six lagoons) ranged from approximately 10.3 to 23.3^°C. The pH ranged in value from 6.8 to 8.1. Aqueous NH_x concentration ranged from 37 to 909 mg N l⁻¹, and TKN varied from 87 to 950 mg N l⁻¹. Fluxes were the largest at the primary lagoon in Kenansville, NC (March 1999) with an average value of 120.3 μg N m⁻² min⁻¹, and smallest at the tertiary lagoon in Rocky Mount, NC (November 1998) at 40.7 μg N m⁻² min⁻¹. Emission rates were found to be correlated with both surface lagoon water temperature and aqueous NH_x concentration. The NH₃-N flux may be modeled as ln(NH₃-N flux)=1.0788+0.0406T_L+0.0015([NH_x]) (R²=0.74), where NH₃-N flux is the ammonia flux from the lagoon surface in μg N m⁻² min⁻¹, T_L is the lagoon surface water temperature in ^°C, and [NH_x] is the total ammonia-nitrogen concentration in mg N l⁻¹.     

Responses of antioxidant status and Na+–K+-ATPase activity in gill of rainbow trout,Oncorhynchus mykiss,chronically treated with carbamazepine

In recent years, chemical pollution by the residual pharmaceuticals has been increasingly important issue due to its widely present in the aquatic environment. However, the toxicological effects of residual pharmaceuticals on fish have not been adequately researched. The aim of this work is to investigate the toxic effect of CBZ, an anticonvulsant drug commonly present in aquatic environment, on antioxidant status and Na⁺–K⁺-ATPase in gill of rainbow trout exposed to sublethal CBZ (1.0 μg L⁻¹, 0.2 mg L⁻¹ and 2.0 mg L⁻¹) for 7, 21 and 42 d. After prolonged exposure of CBZ at higher test concentration (0.2 or 2.0 mg L⁻¹), oxidative stress was apparent as reflected by the significant higher LPO and CP levels in fish gill, as well as the significant inhibition of antioxidant enzymes activities including SOD, CAT, GR and GPx. Besides, reduced glutathione level and Na⁺–K⁺-ATPase activity were significantly lower than those of the control after 42 d of exposure to CBZ at higher test concentration (0.2 or 2.0 mg L⁻¹). The results of this study indicate that chronic exposure of CBZ has altered multiple physiological indices in fish gill; however, before those parameters are used as special biomarkers for monitoring residual pharmaceuticals in aquatic environment, more detailed experiments in laboratory need to be performed in the future.     

Simultaneous reduction of Cr(VI) and oxidation of As(III) by Bacillus firmus TE7 isolated from tannery effluent

Hexavalent chromium [Cr(VI)] and arsenite [As(III)] are the most toxic forms of chromium and arsenic respectively, and reduction of Cr(VI) to Cr(III) and oxidation of As(III) to As(V) has great environmental implications as they affect toxicity and mobility of these toxic species. Bacillus firmus strain TE7, resistant to chromium and arsenic was isolated from tannery effluent. The strain exhibited ability to reduce Cr(VI) and oxidize As(III). It reduced 100 mg L^?1 Cr(VI) within 60 h in nutrient broth and oxidized 150 mg L^?1 As(III) within 10 h in minimal medium. It also completely reduced 15 mg L^?1 Cr(VI) and oxidized 50 mg L^?1 of As(III) simultaneously in minimal medium. To the best of our knowledge, this is the first bacterial strain showing simultaneous reduction of Cr(VI) and oxidation of As(III) and is a potential candidate for bioremediation of environments contaminated with these toxic metal species.     

Effect of natural compounds on reducing formaldehyde emission from plywood

The effects of natural compounds on reducing formaldehyde emission from plywood were investigated. Urea, catechin and vanillin were examined as the natural formaldehyde reducers. The microemission cell, with an internal volume of 35 ml, the maximum exposed test surface area of 177 cm² and an air purge flow rate of 50 ml min⁻¹, was used to measure specific emission rate (SER). In the case of no reducer treatment, formaldehyde emission from plywood was fast and SERs were 4.4 mg m⁻² h⁻¹ at 30 °C and 15 mg m⁻² h⁻¹ at 60 °C. When this plywood was treated with the natural compounds, the SERs of formaldehyde were decreased at all temperatures. In the case of urea treatment, the SERs of formaldehyde decreased to 0.30 mg m⁻² h⁻¹ at 30 °C and 0.65 mg m⁻² h⁻¹ at 60 °C. When the urea treatment was applied to the inside of kitchen cabinet (made from plywood; 270 cm wide, 60 cm deep, 250 cm high), the concentration of formaldehyde was reduced substantially from 1600 to 130 μg m⁻³. The reducing effect of formaldehyde continued during the observation period (6 months), with a mean concentration of 100 μg m⁻³. Reducers in the plywood would react with released formaldehyde. Application of natural compounds such as urea, catechin and vanillin could provide a simple and effective approach for suppressing formaldehyde emission from plywood.     

Chlorpyrifos-induced changes in oxidant/antioxidant status and haematological parameters of Cyprinus carpio carpio: Ameliorative effect of lycopene

The present study was carried out to investigate the potential ameliorative effects of lycopene against chlorpyrifos (CPF) toxicity in carp. The fish were divided into 7 different experimental groups and received the following treatments: Group 1, control; Group 2, orally administered corn oil; Group 3, oral lycopene (10 mg kg^?1 body weight); Group 4, exposure to 0.040 mg L^?1 CPF; Group 5, exposure to 0.040 mg L^?1 CPF plus oral administration of 10 mg kg^?1 lycopene; Group 6, exposure to 0.080 mg L^?1 CPF; and Group 7, exposure to 0.040 mg L^?1 CPF plus oral administration of 10 mg kg^?1 lycopene. Treatment was continued for 14 d and samples of the blood and tissue (liver, kidney, and gill) were collected at the end of the experiment and analysed for their oxidant–antioxidant status, including the malondialdehyde (MDA) levels, and the superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GSH-Px) activity. The samples were also measured for changes in the haematological parameters, such as the red blood cell (RBC) and white blood cell (WBC) counts, the haemoglobin concentration (Hb), the haematocrit (Ht) level, and the erythrocyte indices: the mean corpuscular volume (MCV), the mean corpuscular haemoglobin (MCH) and the mean corpuscular haemoglobin concentration (MCHC). The findings of this study demonstrated that CPF had a negative effect on the haematological parameters and the antioxidant enzyme activities of the fish; this toxic effect was neutralised by the administration of lycopene. The present results suggest that lycopene (10 mg kg^?1) can be effective in the protection of CPF-induced toxicity in fish.     

Exposure of German residents to ethylene and propylene glycol ethers in general and after cleaning scenarios

Glycol ethers are a class of semi-volatile substances used as solvents in a variety of consumer products like cleaning agents, paints, cosmetics as well as chemical intermediates.We determined 11 metabolites of ethylene and propylene glycol ethers in 44 urine samples of German residents (background level study) and in urine samples of individuals after exposure to glycol ethers during cleaning activities (exposure study).In the study on the background exposure, methoxyacetic acid and phenoxyacetic acid (PhAA) could be detected in each urine sample with median (95th percentile) values of 0.11 mg L^?1 (0.30 mg L^?1) and 0.80 mg L^?1 (23.6 mg L^?1), respectively. The other metabolites were found in a limited number of samples or in none.In the exposure study, 5–8 rooms were cleaned with a cleaner containing ethylene glycol monobutyl ether (EGBE), propylene glycol monobutyl ether (PGBE), or ethylene glycol monopropyl ether (EGPE). During cleaning the mean levels in the indoor air were 7.5 mg m^?3 (EGBE), 3.0 mg m^?3 (PGBE), and 3.3 mg m^?3 (EGPE), respectively. The related metabolite levels analysed in the urine of the residents of the rooms at the day of cleaning were 2.4 mg L^?1 for butoxyacetic acid, 0.06 mg L^?1 for 2-butoxypropionic acid, and 2.3 mg L^?1 for n-propoxyacetic acid.Overall, our study indicates that the exposure of the population to glycol ethers is generally low, with the exception of PhAA. Moreover, the results of the cleaning scenarios demonstrate that the use of indoor cleaning agents containing glycol ethers can lead to a detectable internal exposure of residents.     

Preparation of controlled nano-MgO and investigation of its bactericidal properties

Nano-MgO is a good bactericide but with strong alkalinity in water due to its rapid hydrolysis. To control its hydrolysis rate and keep its bactericidal properties, we synthesized nano-MgO microspheres using chitosan–alginate system in this study. The synthesized nano-MgO release-controlled microspheres (nMgO-RCM) were with 0.98–1.20 mm of particle sizes. Also, their embedding ratio and loading percentage was 63.52% and 12.27%, respectively. Based on the characterization results, nano-MgO was only observed on surface of the nMgO-RCM. Its release rate from the nMgO-RCM could be controlled by the chitosan–alginate system, and the observed rate constant (k_obs) increased from 0.0289 h⁻¹ to 0.0358 h⁻¹ with the increment of the dosage from 10 mg L⁻¹ to 80 mg L⁻¹. Furthermore, the nMgO-RCM could maintain pH value lower than 8.5 and colony counts less than 20 CFU mL⁻¹ for at least 120 h.     

Impact of PCB-118 and transformer oil toxicity on anaerobic digestion of sludge: Anaerobic toxicity assay results

In this study, possible toxicity of increasing doses of PCB-118 and transformer oil (TO) on anaerobic sludge digestion was investigated. For this purpose, five different sets of reactors were prepared in which four different PCB-118 concentration (1, 10, 20, and 30 mg L⁻¹) and three different TO concentration (0.38, 0.76, and 1.52 g L⁻¹) were applied. Throughout the study, biogas production and composition, pH, TS, VS, and COD as well as PCB concentration were monitored. Toxicity was investigated by anaerobic toxicity assay (ATA) evaluating the reduction in methane production. A notable inhibition was observed mostly in 30 mg L⁻¹ PCB reactors. A negative influence of PCB-118 and TO was observed on COD and solids removal. A maximum of 26.5% PCB-118 removal was attained.     

Phytoremedial assessment of flora tolerant to heavy metals in the contaminated soils of an abandoned Pb mine in Central Portugal

Significant accumulation of heavy metals in soils and flora exists around the abandoned Barbadalhos Pb mine in Central Portugal. Soil and plant samples [49 species] were collected from two line transects, LT 1 and LT 2, in the mineralized and non-mineralized area, respectively to gain a comprehensive picture of heavy metals in soils and flora to assess its potential for phytoremediation. Phytosociological inventories of the vegetation were made using the Braun-Blanquet cover-abundance scale. Metal concentrations in soil ranged from (in mg kg^?1): 98–9330 [Pb], 110–517 [Zn], 7.1–50 [Co], 69–123 [Cr], 31–193 [Cu], 33 400–98 500 [Fe], 7.7–51 [Ni], 0.95–13 [Ag], 2.8–208 [As], and 71–2220 [Mn] along LT 1; and 24–93 [Pb], 30–162 [Zn], 3.7–34 [Co], 61–196 [Cr], 21–46 [Cu], 24 100–59 400 [Fe], 17–87 [Ni], 0.71–1.9 [Ag], 4.3–12 [As], and 44–1800 [Mn] along LT 2. Plant metal content ranged from (in mg kg^?1): 1.11–548 [Pb], 7.06–1020 [Zn], 0.08–2.09 [Co], 0.09–2.03 [Cr], 2.63–38.5 [Cu], 10.4–4450 [Fe], 0.38–8.9 [Ni], and 0.03–1.9 [Ag] along LT 1; and 0.94–11.58 [Pb], 2.83–96.5 [Zn], 0.12–1.44 [Co], 0.21–1.49 [Cr], 1.61–22.7 [Cu], 4.6–2050 [Fe], 0.51–4.81 [Ni], and 0.02–0.31 [Ag] along LT 2. Plants with highest uptake of metals were: Cistus salvifolius (548 mg Pb kg^?1), Digitalis purpurea (1017 mg Zn kg^?1 and 4450 mg Fe kg^?1). Mentha suavolens and Ruscus ulmifolius were seen to hyperaccumulate Ag (1.9 and 1 mg Ag kg^?1, respectively). More metals and higher concentrations were traced in plants from LT 1, especially for Pb and Zn.     

Atmospheric corrosion effects of HNO3—Influence of temperature and relative humidity on laboratory-exposed copper

The effect of HNO₃ on the atmospheric corrosion of copper has been investigated at varied temperature (15–35 °C) and relative humidity (0–85% RH). Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) confirmed the existence of cuprite and gerhardtite as the two main corrosion products on the exposed copper surface. For determination of the corrosion rate and for estimation of the deposition velocity (V_d) of HNO₃ on copper, gravimetry and ion chromatography has been employed. Temperature had a low effect on the corrosion of copper. A minor decrease in the mass gain was observed as the temperature was increased to 35 °C, possibly as an effect of lower amount of cuprite due to a thinner adlayer on the metal surface at 35 °C. The V_d of HNO₃ on copper, however, was unaffected by temperature. The corrosion rate and V_d of HNO₃ on copper was the lowest at 0% RH, i. e. dry condition, and increased considerably when changing to 40% RH. A maximum was reached at 65% RH and the mass gain remained constant when the RH was increased to 85% RH. The V_d of HNO₃ on copper at ⩾65% RH, 25 °C and 0.03 cm s⁻¹ air velocity was as high as 0.15±0.03 cm s⁻¹ to be compared with the value obtained for an ideal absorbent, 0.19±0.02 cm s⁻¹. At sub-ppm levels of HNO₃, the corrosion rate of copper decreased after 14 d and the growth of the oxide levelled off after 7 d of exposure.     

Comparing the desorption and biodegradation of low concentrations of phenanthrene sorbed to activated carbon,biochar and compost

Carbonaceous soil amendments are applied to contaminated soils and sediments to strongly sorb hydrophobic organic contaminants (HOCs) and reduce their freely dissolved concentrations. This limits biouptake and toxicity, but also biodegradation. To investigate whether HOCs sorbed to such amendments can be degraded at all, the desorption and biodegradation of low concentrations of ¹⁴C-labelled phenanthrene (?5 μg L^?1) freshly sorbed to suspensions of the pure soil amendments activated carbon (AC), biochar (charcoal) and compost were compared. Firstly, the maximum abiotic desorption of phenanthrene from soil amendment suspensions in water, minimal salts medium (MSM) or tryptic soy broth (TSB) into a dominating silicone sink were measured. Highest fractions remained sorbed to AC (84 ± 2.3%, 87 ± 4.1%, and 53 ± 1.2% for water, MSM and TSB, respectively), followed by charcoal (35 ± 2.2%, 32 ± 1.7%, and 12 ± 0.3%, respectively) and compost (1.3 ± 0.21%, similar for all media). Secondly, the mineralization of phenanthrene sorbed to AC, charcoal and compost by Sphingomonas sp. 10-1 (DSM 12247) was determined. In contrast to the amounts desorbed, phenanthrene mineralization was similar for all the soil amendments at about 56 ± 11% of the initially applied radioactivity. Furthermore, HPLC analyses showed only minor amounts (<5%) of residual phenanthrene remaining in the suspensions, indicating almost complete biodegradation. Fitting the data to a coupled desorption and biodegradation model revealed that desorption did not limit biodegradation for any of the amendments, and that degradation could proceed due to the high numbers of bacteria and/or the production of biosurfactants or biofilms. Therefore, reduced desorption of phenanthrene from AC or charcoal did not inhibit its biodegradation, which implies that under the experimental conditions these amendments can reduce freely dissolved concentration without hindering biodegradation. In contrast, phenanthrene sorbed to compost was fully desorbed and biodegraded.     

Ecotoxicity of xanthene dyes and a non-chlorinated bisphenol in soil

Soil eco-toxicity testing was conducted in support of Canada’s Chemical Management Plan (CMP) to fill data gaps for organic chemicals known to primarily partition to soil, and of which the persistence and inherent toxicity are uncertain. Two compounds representative of specific classes of chemicals: non-chlorinated bisphenols containing an –OH group (4,4′-methylenebis(2,6-di-tert-butylphenol (Binox)) and xanthene dyes (2′,4′,5′,7′-tetrabromo-4,5,6,7-tetrachloro-3′,6′-dihydroxy-, disodium salt (Phloxine B), 2′,4′,5’,7′-tetrabromofluorescein (TBF), 4′,5′-dibromofluorescein (DBF), and 4,5,6,7-tetrachlorofluorescein (TCF)) were evaluated. The effect of these substances on plant growth (Elymus lanceolatus and Trifolium pratense) and soil invertebrate survival and reproduction (Folsomia candida and Eisenia andrei) were assessed using a field-collected sandy soil. Binox was persistent throughout testing (up to 63 d) with an average recovery of 77 ± 2.9% at test end. Binox was not toxic to plants (IC50s > 1076 mg kg^?1) or E. andrei (IC50s > 2651 mg kg^?1); however, a significant reduction in F. candida adult survival and reproduction (IC50 = 89 (44–149) mg kg^?1) was evident. Phloxine B was also persistent throughout testing, with an average recovery of 82 ± 3.0% at test end. Phloxine B was significantly more toxic than Binox, with significant reductions in plant root growth (IC50s ? 11 mg kg^?1) and invertebrate reproduction (IC50s ? 22 mg kg^?1). DBF toxicity was not significantly different from that of Phloxine B for plant root growth (IC50s ? 30 mg kg^?1), but was significantly less toxic for shoot growth (IC50s ? 1758 mg kg^?1), and invertebrate adult survival (IC50s ? 2291 mg kg^?1) and reproduction (IC50s ? 451 mg kg^?1). A comparison between all four xanthene dyes was completed using F. candida, with the degree of toxicity in the order of Phloxine B ? TBF ～ DBF > TCF. The results from these studies will contribute to data gaps for poorly understood chemicals (and chemical groupings) under review for environmental risk assessments, and will aid in the validation of model predictions used to characterize the fate and effects of these substances in soil environments.     

Isoprene and monoterpene fluxes measured above Amazonian rainforest and their dependence on light and temperature

Canopy scale emissions of isoprene and monoterpenes from Amazonian rainforest were measured by eddy covariance and eddy accumulation techniques. The peak mixing ratios at about 10 m above the canopy occurred in the afternoon and were typically about 90 ppt_v of α-pinene and 4–5 ppb_v of isoprene. α-pinene was the most abundant monoterpene in the air above the canopy comprising ≈50% of the total monoterpene mixing ratio. Measured isoprene fluxes were almost 10 times higher than α-pinene fluxes. Normalized conditions of 30°C and 1000 μmol m⁻² s⁻¹ were associated with an isoprene flux of 2.4 mg m⁻² h⁻¹ and a β-pinene flux of 0.26 mg m⁻² h⁻¹. Both fluxes were lower than values that have been specified for Amazon rainforests in global emission models. Isoprene flux correlated with a light- and temperature-dependent emission activity factor, and even better with measured sensible heat flux. The variation in the measured α-pinene fluxes, as well as the diurnal cycle of mixing ratio, suggest emissions that are dependent on both light and temperature. The light and temperature dependence can have a significant effect on the modeled diurnal cycle of monoterpene emission as well as on the total monoterpene emission.     

Real-world emission factors of fifteen carbonyl compounds measured in a Hong Kong tunnel

Real-world vehicle emissions of carbonyls were determined in summer and winter of 2003 at the Shing Mun Tunnel, Hong Kong. Fifteen carbonyl species have been analyzed in this study. The total measured carbonyls emission factors ranged from 21.7 to 68.9 mg veh⁻¹ km⁻¹ among different measurement periods, with an average of 35.8±11.9 mg veh⁻¹ km⁻¹. Higher carbonyl emissions were found to be associated with a high proportion of diesel-fueled vehicles. Total measured carbonyl emissions from Diesel-fueled Vehicle (DV, 71.5 mg veh⁻¹ km⁻¹) were about 7 times higher than those from Non-Diesel-fueled Vehicle (NDV, 10 mg veh⁻¹ km⁻¹). The five carbonyls with the largest DV emission factor were, in decreasing order, formaldehyde (38.3 mg veh⁻¹ km⁻¹), acetaldehyde (11.4 mg veh⁻¹ km⁻¹), acetone (5.3 mg veh⁻¹ km⁻¹), crotonaldehyde (5.2 mg veh⁻¹ km⁻¹) and benzaldehyde (2.0 mg veh⁻¹ km⁻¹). These five carbonyl compounds together accounted for 87% of the sum of all DV carbonyl emission factors. For NDV, the five most abundant carbonyls in NDV emission at the tunnel were, in decreasing order, formaldehyde (3.5 mg veh⁻¹ km⁻¹), acetone (1.8 mg veh⁻¹ km⁻¹), methyl ethyl ketone (1.6 mg veh⁻¹ km⁻¹), m,p-tolualdehyde (1.0 mg veh⁻¹ km⁻¹) and acetaldehyde (mg veh⁻¹ km⁻¹). They accounted for 85% of the sum of all NDV carbonyl emission factors.     

Interactions of copper and pyrene on phytoremediation potential of Brassica juncea in copper–pyrene co-contaminated soil

Phytoremediation which is a plant based remediation process is an emerging technology for treating inorganic (heavy metals) as well as organic pollutants. It may also be suitable for remediation of sites co-contaminated with heavy metals and organics which have become more prevalent. A glasshouse experiment was carried out to investigate the effect of 50 and 100 mg kg^?1 of copper or 250 and 500 mg kg^?1 of pyrene and the combined effect of copper and pyrene on the growth of Brassica juncea together with the uptake and accumulation of copper as well as dissipation of pyrene. Results showed a negative effect of copper–pyrene co-contamination on shoot and root dry matter and an inhibition of copper phytoextraction. Pyrene was significantly decreased in planted and non-planted soils accounting for 90–94% of initial extractable concentration in soil planted with B. juncea and 79–84% in non-planted soil which shows that the dissipation of pyrene was enhanced with planting. The occurrence of copper tended to increase the residual pyrene in planted soil, however in the presence of high concentration of Cu (100 mg kg^?1), the residual pyrene concentration in soil were similar to those in unplanted soil. This may suggest that changes in the root physiology or rhizospheric microbial activity resulting from Cu stress could be an impediment to pyrene dissipation. The inhibition of Cu phytoextraction and degradation of pyrene by B. juncea under co-contamination may reduce the viability of phytoremediation in sites containing multiple pollutants.     

A highly resolved anion-exchange chromatographic method for determination of saccharidic tracers for biomass combustion and primary bio-particles in atmospheric aerosol

An improved high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) method is developed and validated for simultaneous determination of atmospherically relevant sugar alcohols, monosaccharides, and monosaccharide anhydrides. The improved method enables the separation of levoglucosan and arabitol which were not or insufficiently separated by the previous HPAEC–PAD methods. Reproducibility of the method was tested for both standard solutions and atmospheric aerosol samples. The peak area relative standard deviation (RSD%) of standard solutions were found to be lower than 1.5% for consecutive analyses (n = 3) and lower than 4% for day to day variation (n = 9). The peak area RSD% of atmospheric samples with typical European wintertime monosaccharide concentrations (n = 9) was found to be similar to that of standard solutions. Limits of detection ranged from 0.002 mg L^?1 for inositol to 0.08 mg L^?1 for fructose. The developed method offers a simple, reliable and cost effective determination of atmospheric tracers for biomass combustion and for selected bio-aerosol components at sub-nanogram per cubic-meter-air concentration levels for routine analysis.     

Photooxidation of methylhydroperoxide and ethylhydroperoxide in the aqueous phase under simulated cloud droplet conditions

The photooxidation of methylhydroperoxide (MHP) and ethylhydroperoxide (EHP) was studied in the aqueous phase under simulated cloud droplet conditions. The kinetics and the reaction products of direct photolysis and OH-oxidation were studied for both compounds. The photolysis frequencies obtained were J_MHP=4.5 (±1.0)×10⁻⁵ s⁻¹ and J_EHP=3.8 (±1.0)×10⁻⁵ s⁻¹ for MHP and EHP respectively at 6 °C. The rate constants of OH-oxidation of MHP at 6 °C were 6.3 (±2.6)×10⁸ M⁻¹ s⁻¹ and 5.8 (±1.9)×10⁸ M⁻¹ s⁻¹ relative to ethanol and 2-propanol respectively, and the rate constant of OH-oxidation of EHP was 2.1 (±0.6)×10⁹ M⁻¹ s⁻¹ relative to 2-propanol at 6 °C. The reaction products obtained were not only the corresponding aldehydes, but also the corresponding acids, and hydroxyhydroperoxides as primary reaction products. The yields for these products were sensitive to the pH value. The carbon balance was higher than 85% for all experiments, showing that most reaction products were detected. A chemical mechanism was proposed for each reaction, and the atmospheric implications were discussed.