Tree leaf biomarkers for atmospheric nitrogen deposition

The aim of this paper was to investigate the effects of nitrogen (N) deposition on tree N cycling and identify potential biomarkers for N deposition. Between April and October 2002 extensive fieldwork was undertaken at Mardley Heath in Hertfordshire. This woodland, located adjacent to the A1(M) motorway, is exposed to high levels of atmospheric nitrogen oxides from the traffic. Measurements of δ¹⁵N, in vivo nitrate reductase (NR) activity, tissue, xylem and surface nitrate concentrations as well as N concentration and growth were made along a 700-m transect at 90° to the motorway. The δ¹⁵N data show that oxidised N from the road traffic is taken up by nearby trees and is incorporated into plant tissues. Our measurements of NR activities suggest elevated rates close to the motorway. However, xylem sap, leaf tissue and leaf surface nitrate concentrations showed no differences between the roadside location and the most distant sampling point from the motorway. Taken together the δ¹⁵N and nitrate reductase data suggest uptake and assimilation of N through the foliage. We conclude that for this lowland deciduous woodland, tissue, xylem and surface measurements of nitrate are unreliable biomarkers for N deposition whereas δ¹⁵N, growth measurements and integrated seasonal NR might be useful. The results also point to the benefit of roadside tree planting to screen pollution from motor vehicles.     

Biodegradability of chitin- and chitosan-containing films in soil environment

The biodegradation of polyethylene-chitin (PE-chitin) and polyethylene-chitosan (PE-chitosan) films, containing 10% by weight chitin or chitosan, by pure microbial cultures and in a soil environment was studied. Three soil-inhabited organsims,Serratia marcescens, Pseudomonas aeruginosa, andBeauveria bassiana were able to utilize chitin and chitosan in prepared PE-chitin and PE-chitosan films after eight weeks of incubation at 25°C in a basal medium containing no source of carbon or nitrogen. In a soil environment, the biodegradation of those films was studied and compared with a commercial biodegradable film containing 6% by the weight of corn starch. In soil placed in the lab, 73.4% of the chitosan and 84.7% of the chitin in the films were degraded, while 46.5% of the starch in the commercial film was degraded after six months of incubation. In an open field, 100% of the chitin and 100% of the chitosan in the films were degraded, but only 85% of the starch in the commercial film was degraded after six months of incubation. The weight of controls, (polyethylene films), remained mainly stable during the incubation period. Both PE-chitin and PE-chitosan films degraded at a higher rate than the commercial starch-based film in a soil environment indicating the potential use of chitin-based films for the manufacturing of biodegradable packaging materials.     

Effect of composting on the Cd,Zn and Mn content and fractionation in feedstock mixtures with wood chips from a short-rotation coppice and bark

Micronutrient content and availability in composts may be affected by the addition of wood chips or tree bark as a bulking agent in the compost feedstock. In the first part of this study, micronutrient levels were assessed in bark and wood of poplar and willow clones in a short-rotation coppice. Large differences between species were observed in bark concentrations for Cd, Zn and Mn. In the second part of the study, we aimed to determine the effect of feedstock composition and composting on Cd, Zn and Mn concentrations and availability. By means of three composting experiments we examined the effect of (a) bark of different tree species, (b) the amount of bark, and (c) the use of bark versus wood chips. In general, compost characteristics such as pH, organic matter and nutrient content varied due to differences in feedstock mixture and composting process. During the composting process, the availability of Cd, Zn and Mn decreased, although the use of willow and poplar bark or wood chips resulted in elevated total Cd, Zn or Mn concentrations in the compost. Cd concentrations in some composts even exceeded legal criteria. Cd and Zn were mainly bound in the reducible fraction extracted with 0.5 M NH₂OH?HCl. A higher acid-extractable fraction for Mn than for Cd and Zn was found. Higher Cd concentrations in the compost due to the use of bark or wood chips did not result in higher risk of Cd leaching. The results of the pH-stat experiment with gradual acidification of composts illustrated that only a strong pH decline in the compost results in higher availability of Cd, Zn and Mn.     

Applying the Protective Role of Condensed Tannins to Acrylic-based Surface Coatings Exposed to Accelerated Weathering

Condensed tannins, extractable from tree bark have been assessed as functional additives to provide a protective role to acrylic-based coating resins. In addition to retaining high antioxidant capacity, the UV absorption properties of native and chemically modified tannins were found to be variously impacted by pH and degree of esterification or etherification. When added to acrylic-based coatings, these tannins were found to contribute colour to a white-base, but only small perceptive differences were found for clear coated wood using typical additive loadings of 0.1–0.4%. Integration of tannins in native or modified form to do not inhibit the cure of acrylic coatings or found to leach from cured coating films. Accelerated weathering was used to evaluate the photo-stability of tannin-modified acrylic and styrene-acrylic coatings. Native and modified tannins with maleate or methylcarboxylate groups retaining high antioxidant activity were associated with significantly greater coating longevity and performance than use of a synthetic photostabiliser. Moreover, esterified condensed tannins with a high degree of substitution also outperformed synthetic additives indicating the inherent UV absorption potential of these materials also contributed this efficacy within the acrylic and styrene-acrylic coating systems.     

Oxygen Permeability and Biodegradability of Polyuronic Acids Prepared from Polysaccharides by TEMPO-Mediated Oxidation

Polyuronic acids, i.e., amylouronic acid, cellouronic acid and chitouronic acid, were prepared from starch, cellulose and chitin, respectively, by the 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO)-mediated oxidation, and their gas-barrier properties and biodegradability were studied in consideration to use the polyuronic acids as flexible packaging films or coating materials. Cellouronic acid and amylouronic acid had excellent oxygen-barrier properties similar to that of poly(vinyl alcohol) (PVA), while chitouronic acid did not. The regular chemical structures of the former two polyuronic acids with no bulky substituents or adducts may have brought about such high oxygen-barrier levels. An oxidized product prepared form fine microcrystalline cellulose by the TEMPO-mediated oxidation was not completely dissolved in water, but became a paste. However, this paste also formed sufficiently smooth films by coating, and had good gas-barrier property. All polyuronic acids prepared were biodegradable; cellouronic acid and chitouronic acid had high degrees of biodegradability, while amylouronic acid had quite low value. These various characteristics are significant for end use of these new polyuronic acids as gas-barrier materials for biodegradable packaging.     

Tree Leaf Biomarkers for Atmospheric Nitrogen Deposition

The aim of this paper was to investigate the effects of nitrogen (N) deposition on tree N cycling and identify potential biomarkers forNdeposition. Between April and October 2002 extensive fieldwork was undertaken at Mardley Heath in Hertfordshire. This woodland, located adjacent to the A1(M) motorway, is exposed to high levels of atmospheric nitrogen oxides from the traffic. Measurements of ¹⁵N, in vivo nitrate reductase (NR) activity, tissue, xylem and surface nitrate concentrations as well as N concentration and growth were made along a 700-m transect at 90° to the motorway. The ¹⁵N data show that oxidised N from the road traffic is taken up by nearby trees and is incorporated into plant tissues. Our measurements of NR activities suggest elevated rates close to the motorway. However, xylem sap, leaf tissue and leaf surface nitrate concentrations showed no differences between the roadside location and the most distant sampling point from the motorway. Taken together the ¹⁵N and nitrate reductase data suggest uptake and assimilation of N through the foliage.We conclude that for this lowland deciduouswoodland, tissue, xylem and surface measurements of nitrate are unreliable biomarkers for N deposition whereas ¹⁵N, growth measurements and integrated seasonal NR might be useful. The results also point to the benefit of roadside tree planting to screen pollution from motor vehicles.     

Effects of Inorganic Antiseptic on the Properties of Zein-Based Active Films

Zein, one of corn processing byproducts, has excellent film-forming ability. However, zein does not have intrinsic antibacterial or antioxidant activity which limits its direct applicability as active food packaging material. In the present study, the rod-shaped micro-sized ZnO crystals were incorporated into zein films to construct zein-based active films as active packaging material with antibacterial property. The morphologies, structural analysis and sizes of ZnO crystals were analyzed by field emission scanning electron microscope and X-ray diffraction. Prepared zein films were evaluated for ZnO loading and distribution. Furthermore, antibacterial activities on Gram-negative bacteria and Gram-positive bacteria were tested by using the disc diffusion method. Lastly, the stability of zein-based active films under the different storage temperature and humidity was investigated. The results showed that zein based-active films had well mechanical properties, stability and antibacterial activities, which were related to the sizes of ZnO crystals in films.     

Vegetable Oil Based Polyurethane Containing 1,2,3-Triazolium Functional Groups as Antimicrobial Wound Dressing

Preparation of antimicrobial polyurethane wound dressing membranes from a mixture of castor oil and a novel soybean oil-based polyol containing 1,2,3-triazolium rings (QTSBO) was described in this research. QTSBO was prepared through N-alkylation of 1,2,3-triazole functional soybean oil (TSBO) with methyl iodide, and TSBO was synthesized from an azidated soybean oil and propargyl alcohol through click reaction. The excellent tensile strength of these dressings under dry state and minimum deterioration of this property at fully hydrated state guaranteed the mechanical protection of wounds during the entire period of the healing process. The measured quantities of equilibrium water absorption and water vapor transmission rate for the optimized dressings confirmed the applicability of the selected formulations for the preservation of proper moist environment over low exuding wounds. The cyto-compatibility of dressings was verified by the excellent ability of the dressings to support the growth and proliferation of dermal fibroblasts. Due to the presence of 1,2,3-triazolium rings the dressing showed efficient antimicrobial activity against different bacterial and fungal stains. Therefore, these dressing could promote wound healing by preserving moist and hygienic environment over the wound bed.     

Distribution of Cd,Ck, Pb and Zn in Soil and Vegetation Compartments in Stands of Five Boreal Tree Species in N.E. Sweden

Concentrations and total quantity of cadmium (Cd), cupper (Cu),lead (Pb) and zink (Zn) were determined in biomass and soil compartments in a replicated tree species experiment with 27-yr-old stands growing on former farmland in N.E. Sweden. Sequentialextractions of soil samples were performed in order to estimate the exchangeable and an organically bound fraction of each element. The tree species included were Picea abies (L.)H. Karst., Pinus sylvestris L., Pinus contorta Dougl., Larix sibirica Ledeb., and Betula pendula Roth.Tree species influenced the rate of removal of Cu, Pb and Zn incase of stemwood harvesting, and of Cd, Cu and Zn in the case ofwhole-tree harvesting. B. pendula and P. abies had higher quantities and average concentrations of Zn in the biomass. For all species, >50% of the Zn in the stems was found in the bark. P. abies and L. sibirica had higher quantities of Cu in the biomass than the other species.P. abies and P. contorta had high quantities of Cd inthe biomass in relation to the other species. Branches and stembark contained high concentrations of Cd and Pb in relation to foliage and stemwood. Dead branches had especially high concentrations of Pb. The high accumulation rate of Zn in thebiomass of B. pendula was related to a low exchangeable amount of Zn in the A horizon. In the superficial centimeters ofthe A horizon, a depletion similar to that found for Zn was detected for Cu, whereas for Cd and Pb, no correlations were found between quantities of elements in the trees and element pools in the soil.     

Phytocapping: Importance of Tree Selection and Soil Thickness

An alternative landfill capping technique known as ‘Phytocapping’ (establishment of perennial plants on a layer of soil placed over the waste) was trailed in Rockhampton, Australia. In this technique, trees were used as ‘bio-pumps’ and ‘rainfall interceptors’ and soil cover as ‘storage’ of water. The environmental performance of the phytocapping system was measured based on its ability to minimise water percolation into the waste. The percolation rate was modelled using HYDRUS 1D for two different scenarios (with and without vegetation) for the thick and thin caps, respectively. Results from the modelling showed percolation rates of 16.7 mm year^?1 in thick cover and 23.8 mm year^?1 in thin cover, both of which are markedly lower than those expected from a clay cap. Results from monitoring and observations showed that 19 trees out of 21 tree species grew well in the harsh landfill environment. Top ten performing species have been identified and are recommended to be grown on phytocaps in the Central Queensland region.     

Assessment of municipal solid waste compost quality using standardized methods before preparation of plant growth media.

The quality of compost and its suitability for agricultural application depend upon physical and chemical parameters such as water-holding capacity, porosity, pH, electrical conductivity, C/N ratio, available nutrients and the absence of toxic substances. In the present study a complete characterization of an industrial municipal solid waste compost (MSWC) based on standardized European methods (CEN) for soil improvers and growing media was obtained, and compared with the quality of other Spanish composted biowaste and conventional substrates such as peat and pine bark. The MSWC was obtained from the main composting plant in Galicia (Spain), which processes organic waste that has been separated at origin and collected from more than 100 000 inhabitants. The MSWC presented a lower C/N ratio (15) than peat (84) and composted pine bark (CPB) (211), but had a similar ratio to other marketed MSWC. The nutrients and heavy metals were extracted using different recommended solvents (water, CaCl2 + diethylen triamin pentaacetic acid, and aqua regia). The nutrient concentrations of composted urban waste or manure were much higher than those of peat, CPB or pine bark. On the basis of the results of the plant tolerance test, the MSWC could be employed directly as a soil improver, but would need to be diluted with other low-salt components such as peat or CPB before being used as a growing media.     

A RE-EVALUATION OF OBJECTIONS TO TREE PLANTING ON CONTAINMENT LANDFILLS

Legislation from developed countries indicates that planting trees on containment landfills is generally forbidden. Concerns centre on the supposition that tree roots can penetrate into and through capping materials, and will thus compromise control of water ingress into waste, and allow the escape of landfill gas. An associated anxiety is that if roots penetrate a clay cap they could cause desiccation and cracking of the clay through excessive moisture abstraction. It is also considered that trees growing on the relatively shallow soil above a landfill cap could be especially prone to uprooting. However, a review of the world literature indicates that maximum depths achieved by tree roots are usually between 1–2 m. Almost 90% of a tree's roots may be found in the upper 0.6 m of soil. Tree roots are highly sensitive to environmental conditions and their downward penetration can be restricted by a number of soil factors including compaction, poor aeration and infertility. A detailed study of these factors indicates that the materials used for capping landfill sites, such as HDPE (high density polyethylene) and compacted clays, can provide an effective barrier to downward root growth. The available information also suggests that tree roots are extremely unlikely to be a primary cause of desiccation cracking in a clay cap owing to their inability to extract more than about one-quarter of the total moisture held in a clay of the density required to ensure a permeability of 1×10⁻⁹m s⁻¹. Trees growing on landfill sites with a rootable soil depth of at least 1.5 m should be at no greater risk of windthrow than most forest trees on undisturbed sites. Methods are available to assess the likelihood of windthrow. In any event, windthrow should not cause disruption of a cap, due to the inability of tree roots to penetrate HDPE, or mineral materials compacted to a bulk density of 1.8 g cm⁻³.     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

Does Soil Acidification Affect Spruce Needle Chemical Composition and Tree Growth?

In 1994, a large survey of soil chemistry was undertaken in thecounty of Värmland in central Sweden (Lundström et al., 1998).The southern part of the county was affected by soilacidification whereas there were no such indications in thenorthern part. To investigate the influence of soil chemistryon the trees at the specific sites, the survey was continued byan analysis of needle chemistry (Norway spruce) which wasundertaken at 150 of the 180 sites, and of tree growth at 65 ofthe 180 sites. Growth was expressed as a ratio between expectedgrowth, estimated with a national, empirical growth model, andthe growth observed in the field. In statistical analyses,using rank correlation, PCA and PLS, there were only weakindications of an influence of soil chemistry on needlechemistry and on tree growth. A moderate correlation betweennitrogen and sulphur in needles was found, which wasinterpreted as an effect of deposition and of processes in thetree canopy. No obvious regional pattern of the growth ratiowas found, in contrast to the clear pattern of soilacidification. The statistical analysis could not with anycertainty point out any of the soil chemistry variables asespecially important for the tree growth ratio.     

Revegetating industrial waste disposal sites

Short-rotation tree plantations were established at seven industrial waste disposal sites in southern Finland. Altogether 31,500 willow cuttings were planted between 1984 and 1989. Neutralized residue from a titanium dioxide pigment process had an unfavourable influence on growth. Biological sludges from a municipal sewage treatment plant, and pulp and paper mills were too compact to be used alone as substrate, but gave a good supply of nutrients. Sand, bark and de-inking waste were sufficiently porous, but were low in nutrients. A mixture of different waste materials is therefore recommended as a substrate for willow stands. Replacement of a natural soil cover with waste material allows disposal of a greater volume of refuse and diminishes the costs of revegetation. The landfill characteristics have to be taken into account. The high temperature of bark also disturbed the growth of willow stands. Ferrous sulphate in the landfill limits the possibility of irrigating the stand. The highest biomass production of the stands exceeded that of normal Finnish forest. Willow stands can be used for landscaping industrial waste disposal sites, for increasing evapotranspiration and minimizing leachate discharge.     

丙烯腈反应器的故障树分析

应用系统可靠性分析基本原理，以丙烯腈反应工序的核心装置反应器为分析对象，确定反应器在运行过程中的防爆膜破裂事故为顶事件，应用故障树分析方法建立故障树，并对其进行定性和定量分析，得出顶事件最小割集和发生概率。本工作对石化企业的环境风险评价和安全分析具有重要意义。     

Enzymatic Degradation of Poly(l-Lactic Acid): Effects of UV Irradiation

Amorphous and crystallized poly(l-lactic acid) (PLLA-A and PLLA-C, respectively) films were prepared, and the proteinase K-catalyzed enzymatic degradation of UV-irradiated and non-irradiated PLLA-A and PLLA-C films was investigated for periods up to 10 h (PLLA-A) and 60 h (PLLA-C). The molecular weights of both the PLLA-A and PLLA-C films can be manipulated by altering the UV irradiation time. The enzymatic weight loss values of the UV-irradiated PLLA films were higher than or similar to those of the non-irradiated PLLA film, when compared with the specimens of same crystallinities. UV irradiation is expected to cause the PLLA films to undergo chain cleavage (a decrease in molecular weight) and the formation of C=C double bonds. It seems that the acceleration effects from decreased molecular weight on enzymatic degradation were higher than or balanced with the disturbance effects caused by the formation of C=C double bonds. After enzymatic degradation, a fibrous structure appeared on the spherulites of the UV-irradiated PLLA-C film. This structure may have arisen from chains containing or neighboring on the C=C double bonds, which were enzymatically undegraded and assembled on the film surface during enzymatic degradation. The results of this study strongly suggest that UV irradiation will significantly affect the biodegradation behavior of PLLA materials in the environment.     

Phytoremediation experimentation with the herbicide bentazon

An experiment was performed on six species of trees to determine the feasibility of remediating groundwater contaminated with an agricultural herbicide, bentazon, at a site in southern Louisiana. Fate studies on bentazon support that it is translocated to the plant leaves where it is degraded by photolysis to lower-order derivative compounds within short periods of time. Both transpiration observations and dosing tests suggest that the most favorable phreatophyte and tolerant specie of tree to bentazon exposure was the black willow (Salix nigra).     

Atmospheric Transfer and Deposition Mechanisms of 210Pb Aerosols onto Forest Soils

Activities of ²¹⁰Pb carrier aerosols in an age-graded Sitka spruce conifer, three deciduous (oak, lime and sycamore) foliage and in rain and throughfall samples have been measured during the period of 2001–2002. The ²¹⁰Pb concentrations in the age-graded Sitka leaf needles have shown to accumulate until a steady state between accretion and loss of particulate matter is maintained with time. Similarly, the concentrations of ²¹⁰Pb on deciduous tree leaves increased with time until the leaves began to senesce. The ²¹⁰Pb inventory in bulk precipitation was significantly (r ²?=?0.99; P?<?0.001) large compared with that in throughfall samples, as indicated by a ratio of 1 to 0.1 of ²¹⁰Pb deposition in bulk precipitation to throughfall. This suggests that ²¹⁰Pb is retained in the Sitka spruce foliage during deposition until transfer to the ground mainly through litterfall. These findings suggest that the presence of woodland is responsible for enhanced ²¹⁰Pb deposition fluxes beneath wooded areas relative to open grassland soils.     

Measuring Aerosol and Heavy Metal Deposition on Urban Woodland and Grass Using Inventories of 210Pb and Metal Concentrations in Soil

The deposition of aerosols to trees has proved very difficult to quantify, especially in complex landscapes. However, trees are widely quoted to be efficient scavengers of particles from the atmosphere, and a growing proportion of the pollutant burden in the atmosphere is present in the aerosol phase. In this study, the deposition of aerosols onto woodland and grass was quantified at a range of locations throughout the West Midlands of England. The sites included mature deciduous woodland in Edgbaston, and Moseley, and mixed woodland at sites within Sutton Park, a large area of semi-natural vegetation. Aerosol deposition to areas of grassland close to the woodland at each site was also measured. Detailed inventories of ²¹⁰Pb in soils within the woodland and in grassland soils, together with concentrations in the atmosphere and precipitation, provided the necessary data to calculate the long-term (about 40 years) annual deposition of sub-micron aerosols onto grassland and woodland. The soil inventories of ²¹⁰Pb under woodland exceeded those under grass, by between 22% and 60%, with dry deposition contributing 24% of the total input flux for grass and 47% for woodland. The aerosol dry deposition velocity to grassland averaged 3.3 mm s^-1 and 9 mm s^-1 for woodland. The large deposition rates of aerosols onto woodland relative to grass or other short vegetation (× 3), and accumulation of heavy metals within the surface horizons of organic soils, leads to large concentrations in soils of urban woodland. Concentrations in the top 10 cm of these woodland soils averaged 252 mg kg^-1 for Pb with peaks to 400 mg kg^-1. Concentrations of Cd averaged 1.4 mg kg^-1, Cu, 126 mg kg^-1, Ni 23 mg kg^-1 and Zn 173 mg kg^-1. The accumulated Pb in urban woodland soils is shown to be large relative to UK emissions.