Sustainable Development in an N-Rich/N-Poor World

Sustainable development requires that per capita inclusive wealth—produced, human, and natural capital—does not decline over time. We investigate the impact of changes in nitrogen on inclusive wealth. There are two sides to the nitrogen problem. Excess use of nitrogen in some places gives rise to N-pollution, which can cause environmental damage. Insufficient replacement of nitrogen in other places gives rise to N-depletion, or loss of nutrient stocks. Neither is explicitly accounted for in current wealth measures, but both affect wealth. We calculate an index of net N-replacement, and investigate its relationship to wealth. In countries with low levels of relative N-loss, we find that the uncompensated loss of soil nitrogen in poorer countries is associated with declining rates of growth of inclusive per capita wealth. What is less intuitive is that increasing fertilizer application in both rich and poor countries can increase per capita inclusive wealth.     

Information system for monitoring environmental impacts of genetically modified organisms

Background, aim and scope  

European legislation stipulates that genetically modified organisms (GMO) have to be monitored to identify potential adverse environmental effects. A wealth of different types of monitoring data from various sources including existing environmental monitoring programmes is expected to accumulate. This requires an information system to efficiently structure, process and evaluate the monitoring data.     

The European nitrogen case

The N budget for Europe (excluding the former Soviet Union) indicates that the 3 principal driving forces of the acceleration of the European N cycle are fertilizer production (14 Mt (mill. tonnes) N yr-1), fossil fuel combustion and other industry (3.3 Mt N yr-1) and import of N in various products (7.6 Mt N yr-1). The various leaks of reactive N species from European food, energy and industrial production systems are estimated and their effects on human health and terrestrial and aquatic ecosystems are assessed. Future European environmental policy measures to close the N cycle and to reduce leaks of reactive N can best focus on the three major driving forces, taking into consideration the possible consequences in the N cascade. Critical loads may be useful tools in determining N-emission ceilings and developing integrated policies for regulating N flows such as fertilizer use and imports and N levels.     

Tree and stand growth of mature Norway spruce and European beech under long-term ozone fumigation

In a 50- to 70-year-old mixed stand of Norway spruce (Picea abies (L.) Karst.) and European beech (Fagus sylvatica L.) in Germany, tree cohorts have been exposed to double ambient ozone (2×O₃) from 2000 through 2007 and can be compared with trees in the same stand under the ambient ozone regime (1×O₃). Annual diameter growth, allocation pattern, stem form, and stem volume were quantified at the individual tree and stand level. Ozone fumigation induced a shift in the resource allocation into height growth at the expense of diameter growth. This change in allometry leads to rather cone-shaped stem forms and reduced stem stability in the case of spruce, and even neiloidal stem shapes in the case of beech. Neglect of such ozone-induced changes in stem shape may lead to a flawed estimation of volume growth. On the stand level, 2×O₃ caused, on average, a decrease of 10.2 m³ ha⁻¹ yr⁻¹ in European beech.     

Adaptation to environmental stress in Daphnia magna simultaneously exposed to a xenobiotic

In standardized ecotoxicological testing chemicals are investigated under optimal conditions for the test organisms despite the fact that environmental factors such as predation pressure and food availability are important parameters regulating natural populations. Food limitation and predator presence can induce shifts in life-history traits in various Daphnia species, especially trade-offs in reproductive biomass allocation. These adaptive responses are thought to ensure survival of the population in a highly variable environment. A xenobiotic dispersant (used in textile dyeing processes) also shifted the biomass allocation of Daphnia magna. To assess whether the dispersant could hinder D. magna adaptation to varying environmental conditions, we conducted experiments with food level and presence of Chaoborus larvae as environmental factors and simultaneous exposure to the dispersant. At low food level and in presence of the predator, D. magna produced fewer but larger sized neonates, regardless of dispersant exposure. The dispersant shifted biomass allocation towards more but smaller sized offspring in all experiments. However, the adaptive response to the environmental factors and the dispersant effect cancelled each other out in that they induced independently from each other opposite shifts in biomass allocation. In summary, the dispersant exposure resulted not in an inhibition of the adaptive response but in a reduction of the value of the response. Our study with this model substance demonstrates that xenobiotics can affect the adaptation of organisms to environmental stress which can result in effects likely to be overlooked in standardized testing.     

Source-term development for a contaminant plume for use by multimedia risk assessment models

Multimedia modelers from the US Environmental Protection Agency (EPA) and US Department of Energy (DOE) are collaborating to conduct a comprehensive and quantitative benchmarking analysis of four intermedia models: MEPAS, MMSOILS, PRESTO, and RESRAD. These models represent typical analytically based tools that are used in human-risk and endangerment assessments at installations containing radioactive and hazardous contaminants. The objective is to demonstrate an approach for developing an adequate source term by simplifying an existing, real-world, ⁹⁰Sr plume at DOE's Hanford installation in Richland, WA, for use in a multimedia benchmarking exercise between MEPAS, MMSOILS, PRESTO, and RESRAD. Source characteristics and a release mechanism are developed and described; also described is a typical process and procedure that an analyst would follow in developing a source term for using this class of analytical tool in a preliminary assessment.     

Resource allocation for mitigating regional air pollution–related mortality: A summertime case study for five cities in the United States

An important issue of regional air quality management is to allocate air quality management funds to maximize environmental and human health benefits. In this study, we use an innovative approach to tackle this air quality management issue. We develop an innovative resource allocation model that allows identification of air pollutant emission control strategies that maximize mortality avoidances subject to a resource constraint. We first present the development of the resource allocation model and then a case study to show how the model can be used to identify resource allocation strategies that maximize mortality avoidances for top five Metropolitan Statistical Areas (MSAs) (i.e., New York, Los Angeles, Chicago, Dallas-Fort Worth, and Philadelphia) in the continental United States collectively. Given budget constraints in the U.S. Environmental Protection Agency’s (EPA) Clean Air Act assessment, the results of the case study suggest that controls of sulfur dioxide (SO₂) and primary carbon (PC) emissions from EPA Regions 2, 3, 5, 6, and 9 would have significant health benefits for the five selected cities collectively. Around 30,800 air pollution–related mortalities could be avoided during the selected 2-week summertime episode for the five cities collectively if the budget could be allocated based on the results of the resource allocation model. Although only five U.S. cities during a 2-week episode are considered in the case study, the resource allocation model can be used by decision-makers to plan air pollution mitigation strategies to achieve the most significant health benefits for other seasons and more cities over a region or the continental U.S.Implications: Effective allocations of air quality management resources are challenging and complicated, and it is desired to have a tool that can help decision-makers better allocate the funds to maximize health benefits of air pollution mitigation. An innovative resource allocation model developed in this study can help decision-makers identify the best resource allocation strategies for multiple cities collectively. The results of a case study suggest that controls of primary carbon and sulfur dioxides emissions would achieve the most significant health benefits for five selected cities collectively.     

Total Organic Carbon,an Important Tool in an Holistic Approach to Hydrocarbon Source Fingerprinting

The identification and allocation of multiple hydrocarbon sources in marine sediments is best achieved using an holistic approach. Total organic carbon (TOC) is one important tool that can constrain the contributions of specific sources and rule out incorrect source allocations in cases where inputs are dominated by fossil organic carbon. In a study of the benthic sediments from Prince William Sound (PWS) and the Gulf of Alaska (GOA), we find excellent agreement between measured TOC and TOC calculated from hydrocarbon fingerprint matches of polycyclic aromatic hydrocarbons (PAH) and chemical biomarkers. Confirmation by two such independent source indicators (TOC and fingerprint matches) provides evidence that source allocations determined by the fingerprint matches are robust and that the major TOC sources have been correctly identified. Fingerprint matches quantify the hydrocarbon contributions of various sources to the benthic sediments and the degree of hydrocarbon winnowing by waves and currents. TOC contents are then calculated using source allocation results from fingerprint matches and the TOCs of contributing sources. Comparisons of the actual sediment TOC values and those calculated from source allocation support our earlier published findings (Boehm et al ., 2001) that the natural petrogenic hydrocarbon background in sediments in this area comes from eroding Tertiary shales and associated oil seeps along the northern GOA coast and exclude thermally mature area coals from being important contributors to the PWS background due to their high TOC content.     

Total Organic Carbon,an Important Tool in an Holistic Approach to Hydrocarbon Source Fingerprinting

The identification and allocation of multiple hydrocarbon sources in marine sediments is best achieved using an holistic approach. Total organic carbon (TOC) is one important tool that can constrain the contributions of specific sources and rule out incorrect source allocations in cases where inputs are dominated by fossil organic carbon. In a study of the benthic sediments from Prince William Sound (PWS) and the Gulf of Alaska (GOA), we find excellent agreement between measured TOC and TOC calculated from hydrocarbon fingerprint matches of polycyclic aromatic hydrocarbons (PAH) and chemical biomarkers. Confirmation by two such independent source indicators (TOC and fingerprint matches) provides evidence that source allocations determined by the fingerprint matches are robust and that the major TOC sources have been correctly identified. Fingerprint matches quantify the hydrocarbon contributions of various sources to the benthic sediments and the degree of hydrocarbon winnowing by waves and currents. TOC contents are then calculated using source allocation results from fingerprint matches and the TOCs of contributing sources. Comparisons of the actual sediment TOC values and those calculated from source allocation support our earlier published findings (5) that the natural petrogenic hydrocarbon background in sediments in this area comes from eroding Tertiary shales and associated oil seeps along the northern GOA coast and exclude thermally mature area coals from being important contributors to the PWS background due to their high TOC content.     

Generic scenario for the impact of cooling lubricants into the hydrosphere

According to directive 93/67/EEC of the European Commission, this paper deals with the generic exposition evaluation of the environmental concentration of cooling Lubricant chemicals from the metal working industry into the hydrosphere. After considering the relevant life-cycle steps and the selection of a representative point source for the 'reasonable worst case', the emission per day Elocal(water) is determined. It leads to the predicted environmental concentration (PEClocal(water)) for the local stage in the compartment water. In order to gain the PEClocal(water) for an example--a corrosion inhibitor as additive in a cooling lubricant--, the relevant emission paths and the corresponding representative point source are described for the reasonable worst case. For non-water-miscible cooling lubricants, none of the operations in the life cycle leads to a release into the compartment water. To evaluate the hazard potential for cooling lubricant chemicals, the complete risk assessment has to be done. Also, the assessment has to be done for all high production volume chemicals, new substances and existing hazard chemicals. This means that even industrial categories like chemicals used in the textile industry or biocides and others have to be evaluated.     

Black carbon aerosol and carbon monoxide in European regionally polluted air masses at Mace Head, Ireland during 1995–1998

Continuous measurements of black carbon aerosol (BCA) at the Mace Head Atmospheric Research Station on the Atlantic Ocean coast of Ireland show the occurrence of dramatically elevated concentrations when regionally polluted air masses are advected to the station. These occurrences correlate well with similar elevations in carbon monoxide and a wide range of other trace gases monitored near-simultaneously with the BCA. Using daily sector allocation and a sophisticated Lagrangian dispersion model, two independent estimates of the European emission source strength of BCA that are required to explain the Mace Head observations have been made. The best estimates of the UK and European emission source strengths of BCA are 46±14 and [(482–511)±140]×10³ tonnes yr⁻¹, respectively, and these estimates compare favourably with published inventories, at least to within ±25%, though they are considerably smaller than the emissions employed in some early global climate model studies.     

Allocation by Contribution to Cost and Risk at Superfund Sites

Because there is no specific legislative or regulatory guidance, there is no “right” way to allocate liability at Superfund sites. Allocation based on the cost of a remedy, and allocation based on the need for a remedy, i.e. risk-based allocation, represent two possibilities. Other allocation schemes can be located between these two philosophical poles. When waste streams and environmental impacts are qualitatively similar, allocation based solely on costs may make the most sense. When one or more potentially responsible parties (PRPs) have qualitatively different wastes or impacts, an allocation scheme based on both contribution to cost and to risk may be able to incorporate all PRPs. In any case, dissident PRPs, whose contribution to remedy costs is large but whose contribution to risk is small, may find satisfaction in the courts where there is precedent for risk-based allocation.     

Allocation by Contribution to Cost and Risk at Superfund Sites

Because there is no specific legislative or regulatory guidance, there is no "right" way to allocate liability at Superfund sites. Allocation based on the cost of a remedy, and allocation based on the need for a remedy, i.e. risk-based allocation, represent two possibilities. Other allocation schemes can be located between these two philosophical poles. When waste streams and environmental impacts are qualitatively similar, allocation based solely on costs may make the most sense. When one or more potentially responsible parties (PRPs) have qualitatively different wastes or impacts, an allocation scheme based on both contribution to cost and to risk may be able to incorporate all PRPs. In any case, dissident PRPs, whose contribution to remedy costs is large but whose contribution to risk is small, may find satisfaction in the courts where there is precedent for risk-based allocation.     

Interlaboratory and Intralaboratory Variability in the Analysis of Mercury in Coal

Abstract

With the passage of the 1990 Clean Air Act Amendments (CAAA), accurate determination of the concentration of mercury in coal has become an increasingly important issue. To address this issue, CONSOL R&D conducted a round robin analytical program to determine the interlaboratory and intralaboratory variability in the measurement of mercury in coal. CONSOL supplied homogeneous splits of Pittsburgh and Illinois #6 seam coals, and the NIST 1632b coal standard to eleven laboratories, twice each, over a one-year period. A twelfth laboratory analyzed the coals once. A European coal standard, certified for mercury, was analyzed at the completion of the round robin study to evaluate accuracy. The round robin participants included representatives from industry, government, and academia. The laboratories, which are experienced in mercury-in-coal analysis, used various state-of-the-art sample preparation and analysis procedures in the study. The round robin results indicate that a substantial level of variability exists in the mercury-in-coal determination. Earlier studies1 found similar results. The relative intralaboratory repeatability was 0.02 ppm and the relative interlaboratory reproducibility ranged from 0.04 to 0.05 ppm. The study showed that laboratory variability can be greatly skewed by outlier values. Fifty-six percent of the results for the European coal standard fell within a 95% confidence interval of the standard (0.138 ± 0.11 ppm). These results indicate that accuracy is not method-dependent.     

Environmental product attributes in end-of-life management in the UK. Part I: an end-of-life eco-declaration for waste IT and office equipment

The focus of this paper and its companion (Part II) is to identify producer responsibility associated with the proposed Waste from Electrical and Electronic Equipment (WEEE) Directive and the need for greater information about the environmental attributes of electrical and electronic equipment to facilitate end-of-life management of discarded products. Recently, a wide-ranging debate has started within the IT industry centred on the best way to define the exact nature of the information that needs to be supplied to recyclers by producers in order to comply with the proposed European Commission Directive. Using IT and office equipment as an indicative example, semi-structured telephone interviews were conducted with representatives of the UK electronics end-of-life management industry about the environmental attributes that are needed for compliance with the draft Directive. The results of this research indicate there is specific information about equipment that is required on a regular basis, the most important of which is centred on hazardous substances and materials contained in whole units, parts and components of that equipment. The content of an eco-declaration for end-of-life management of IT and office equipment derived from quantitative and qualitative interview data is presented.     

Primary emissions of fine carbonaceous particles in Europe

The European emissions of BC and OC in fine particles are calculated for the years 1990, 1995 and 2000 applying the RAINS model that, beyond fuel-sector distinction, explicitly includes various combustion technologies and the penetration of abatement options. The emission factors used are developed considering specific European conditions. The main sources of carbonaceous aerosols in Europe are emissions from traffic and residential combustion of solid fuels. Between 1990 and 2000, the BC and OC emissions are estimated to decline from 0.89 to 0.68 Tg and from 1.4 to 1.0 Tg, respectively. Most of the reduction occurred in the early 1990s in Eastern Europe owing to structural changes that resulted in energy efficiency improvements in industry and lower consumption of solid fuels in residential–commercial sector; the latter having strong impact on BC and OC emissions. Furthermore, the growth in transport volumes, and expected increase in emissions, was offset by introduction of stricter legislation for road transport from 1995. Focusing on the most important sectors, transport and residential combustion, the variation in measured carbonaceous emission shares and its impact on total emissions was evaluated. This analysis indicates a range of about −25% to +20% for BC and −7% and +15% for OC, compared to the central case.     

Selection for increased production and the welfare of dairy cows: are new breeding goals needed?

In many European countries, milk production per cow has more than doubled in the last 40 years. The increase in production has been accompanied by declining ability to reproduce, increasing incidence of health problems, and declining longevity in modern dairy cows. Genetic selection for increased milk yield increasingly is viewed as increasing profit at the expense of reducing animal welfare. The economic future of the dairy industry is related directly to public acceptance of its breeding and production practices. It is important to the dairy industry that welfare problems should be addressed before there is widespread condemnation of breeding and management practices. A new breeding goal aimed at improving fitness and tolerance of metabolic stress is necessary to prevent the decrease in the quality of life of dairy cows and instead, perhaps, enhance it.     

Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic

In this paper, we have analyzed parts of printed circuit board (PCB) and liquid crystal display (LCD) screens of mobile phones and computers, quantitative and qualitative chemical compositions of individual components, and complete PCBs were determined. Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) methods were used to determine the temperatures of phase transformations, whereas qualitative and quantitative compositions of the samples were determined by X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and scanning electron microscopy (SEM)-energy dispersive X-ray spectrometry (EDS) analyses. The microstructure of samples was studied by optical microscopy. Based on results of the analysis, a procedure for recycling PCBs is proposed. The emphasis was on the effects that can be achieved in the recycling process by extraction of some parts before the melting process. In addition, newly developed materials can be an adequate substitute for some of the dangerous and harmful materials, such as lead and arsenic are proposed, which is in accordance with the European Union (EU) Restriction of the use of certain hazardous substances (RoHS) directive as well as some alternative materials for use in the electronics industry instead of gold and gold alloys.     

Below-ground carbon allocation in mature beech and spruce trees following long-term, experimentally enhanced O3 exposure in Southern Germany

Canopies of adult European beech (Fagus sylvatica) and Norway spruce (Picea abies) were labeled with CO₂ depleted in ¹³C to evaluate carbon allocation belowground. One-half the trees were exposed to elevated O₃ for 6 yrs prior to and during the experiment. Soil-gas sampling wells were placed at 8 and 15 cm and soil CO₂ was sampled during labeling in mid-late August, 2006. In beech, δ¹³CO₂ at both depths decreased approximately 50 h after labeling, reflecting rapid translocation of fixed C to roots and release through respiration. In spruce, label was detected in fine-root tissue, but there was no evidence of label in δ¹³CO₂. The results show that C fixed in the canopy rapidly reaches respiratory pools in beech roots, and suggest that spruce may allocate very little of recently-fixed carbon into root respiration during late summer. A change in carbon allocation belowground due to long-term O₃ exposure was not observed.     

Climate change policy in the peripheral countries of Europe: Ireland as a case study

Owing to their relative underdevelopment, the 'cohesion' countries of the European Union have been allowed to increase emissions above the 1990 base within the EU 'envelope'. However, they face daunting challenges in meeting the agreed targets, because it requires breaking the link between rising gross domestic product and rising energy consumption at a relatively early stage in the economic development cycle. This paper examines the extreme case of Ireland, which is experiencing the most rapid growth in the EU. It shows that Ireland has already reached its emissions ceiling. The best opportunities for reducing emissions lie in energy supply, industry, and the household sector. A mix of policy instruments is required. Emissions trading seems to be the most effective policy instrument for reducing greenhouse gas emissions from energy supply and large industry. Such a policy would provide a stimulus for continuous improvement, without which Ireland's limit will be breached.