生物表面活性剂及其在环境修复中的研究进展

生物表面活性剂是由微生物分泌的天然产物,由于其物理性质和化学结构与许多人工合成的表面活性剂相似,并且对土壤、淡水、海洋等生态系统毒性较低,因而在环境污染治理方面,特别是在重金属和石油等有机溶剂污染的原位和异位生物修复方面具有极大的应用潜力.主要综述了近年国内外生物表面活性剂在廉价制备、作用机理、环境修复中的研究进展.     

Means to improve the effect of in situ bioremediation of contaminated soil: an overview of novel approaches

Different aspects of bacterial degradation of organic contaminants in soil, and how to improve the efficiency and reproducibility is discussed in this review. Although bioremediation in principle includes the use of any type of organism in improving the condition of a contaminated site, most commonly bacteria are the degraders and other organisms, such as soil animals or plant roots, play a role in dissemination of bacteria and, indirectly, plasmids between bacteria, and in providing nutrients and co-substrates for the bacteria active in the degradation process. There are a number of different procedures that have been tested more-or-less successfully in attempts to improve reliability, cost efficiency and speed of bioremediation. The methods range from minimal intervention, such as mere monitoring of intrinsic bioremediation, through in situ introduction of nutrients and/or bacterial inocula or improvement of physico-chemical conditions, all the way to excavation followed by on site or ex situ composting in its different varieties. In the past the rule has been that more intervention (leading to higher costs) has been more reliable, but novel ideas are continuously tried out, both as a means to come up with new truly functional applications and also as a line of studies in basic soil microbial ecology. Both approaches generate valuable information needed when predicting outcome of remediation activities, evaluating environmental risks, deciding on cleaning-up approaches, etc. The emphasis of this review is to discuss some of the novel methods for which the value has not been clearly shown, but that in our view merit continued studies and efforts to make them work, separately or in combination.     

原位热处理技术修复重质非水相液体污染场地研究进展

重质非水相液体(DNAPLs)是土壤及地下水中广泛存在的有机污染物,原位热处理技术是目前修复受DNAPLs污染土壤及地下水的最具潜力的技术之一。综述了国内外常用原位热处理技术的基本原理及其影响因素,介绍了相关现场应用实例,并展望了该技术未来的应用前景和发展趋势,以期为中国污染土壤及地下水的原位修复提供有益借鉴。     

Evaluation of biosurfactants for crude oil contaminated soil washing

An evaluation of the ability of aqueous biosurfactant solutions (aescin, lecithin, rhamnolipid, saponin and tannin) for possible applications in washing crude oil contaminated soil was carried out. The biosurfactants behaviour in soil-water, water-oil and oil-soil systems (such as foaming, solubilization, sorption to soil, emulsification, surface and interfacial tension) was measured and compared with a well-known chemical surfactant (sodium dodecyl sulphate, SDS) at varying concentrations. Results showed that the biosurfactants were able to remove significant amount of crude oil from the contaminated soil at different solution concentrations for instance rhamnolipid and SDS removed up to 80% oil and lecithin about 42%. The performance of water alone in crude oil removal was equally as good as those of the other biosurfactants. Oil removal was due to mobilization, caused by the reduction of surface and interfacial tensions. Solubilization and emulsification effects in oil removal were negligible due to the low crude oil solubilization of 0.11%. Therefore, these studies suggest that knowledge of surfactants' behaviour across different systems is paramount before their use in the practical application of oil removal.     

Ecotoxicological evaluation of in situ bioremediation of soils contaminated by the explosive 2,4,6-trinitrotoluene (TNT)

To evaluate the environmental relevance of in situ bioremediation of contaminated soils, effective and reliable monitoring approaches are of special importance. The presented study was conducted as part of a research project investigating in situ bioremediation of topsoils contaminated by the explosive 2,4,6-trinitrotoluene (TNT). Changes in soil toxicity within different experimental fields at a former ordnance factory were evaluated using a battery of five bioassays (plant growth, Collembola reproduction, soil respiration, luminescent bacteria acute toxicity and mutagenicity test) in combination to chemical contaminant analysis. Resulting data reveal clear differences in sensitivities between methods with the luminescent bacteria assay performed with soil leachates as most sensitive toxicity indicator. Complete test battery results are presented in so-called soil toxicity profiles to visualise and facilitate the interpretation of data. Both biological and chemical monitoring results indicate a reduction of soil toxicity within 17 months of remediation.     

Soil microbial parameters and luminescent bacteria assays as indicators for in situ bioremediation of TNT-contaminated soils

In situ bioremediation is increasingly being discussed as a useful strategy for cleaning up contaminated soils. Compared to established ex situ procedures, meaningful and reliable approaches for monitoring the remediation processes and their efficiency are of special importance. The subject of this study was the significance of two bioassays for monitoring purposes. The work was performed within the scope of a research project on the in situ bioremediation of topsoil contaminated with 2,4,6-trinitrotoluene (TNT). To evaluate changes within different experimental fields during a 17-month remediation period, the results of soil microbial assays and luminescent bacteria assays were compared with chemical monitoring data. The luminescent bacteria assays showed a significant reduction of the water-soluble soil toxicants in the treated fields. This bioassay proved to be a sensitive screening indicator of toxicity and may effectively aid the ecotoxicological interpretation of chemical monitoring data. Microbial biomass (C(mic)), the metabolic quotient (qCO2), and the ratio of microbial to organic carbon (C(mic)/C(org)) showed a highly significant correlation with total concentrations of TNT in the soil. But, in contrast to luminescent bacteria assays, this approach did not reveal any recovery of the soil at the end of the remediation period. There is clear evidence for persistent adverse effects of chronic TNT contamination on the site-specific microbial community and the local carbon cycle in the soil. The study clearly exhibits the differences between, as well as the complementary value of both bioassay approaches for monitoring short-term and long-term effects of soil contamination and the efficiency of remediation.     

Bioremediation of soil contaminated with polynuclear aromatic hydrocarbons (PAHs): a review

Polynuclear aromatic hydrocarbons (PAHs) constitute a group of priority pollutants which are present at high concentrations in the soils of many industrially contaminated sites. Criteria established for the removal or treatment or both of soils contaminated with PAHs vary widely within and between nations. The bioremediation of contaminated soils with in-situ, on-site, and bioreactor techniques is reviewed, together with the factors affecting PAH degradation. Current in-situ remediation techniques are considered ineffective for the removal of most PAHs from contaminated soil. On-site 'landforming' methods have been used successfully (and within a reasonable period of time) to degrade only those PAHs with three or fewer aromatic rings. Bioreactors have proved most effective for soil remediation, since conditions for enhanced degradation can be achieved most readily. However, bioreactors are still at the development stage, and further research is required to optimise their efficiency and economy for routine use. Degradation of the more recalcitrant high-molecular-weight PAHs is contaminated soil has not been particularly successful to date. Further research needs are identified to help develop bioremediation into a most cost-effective technology. The importance of full site assessments and treatability studies for successful application in the field is emphasised.     

The use of bacterial bioremediation of metals in aquatic environments in the twenty-first century: a systematic review

Metal pollution is a current environmental issue as a consequence of unregulated anthropic activiy. A wide range of bioremediation strategies have been successfully implemented to recover contaminated areas. Among them, bacterial bioremediation stands out as a promising tool to confront these types of concerns. This study aimed to compare and discuss worldwide scientific evolution of bacterial potential for metal bioremediation in aquatic ecosystems. The study consisted of a systematic review, elaborated through a conceptual hypothesis model, during the period from 2000 to 2016, using PubMed, MEDLINE, and SciELO databases as data resources. The countries with the largest number of reports included in this work were India and the USA. Industrial wastewater discharge was the main subject associated to metal contamination/pollution and where bacterial bioremediations have mostly been applied. Biosorption is the main bioremediation mechanism described. Bacterial adaptation to metal presence was discussed in all the selected studies, and chromium was the most researched bioremedied substrate. Gram-negative Pseudomonas aeruginosas and the Gram-positive Bacillus subtilis bacteria were microorganisms with the greatest applicability for metal bioremediation. Most reports involved the study of genes and/or proteins related to metal metabolism and/or resistence, and Chromobacterium violaceum was the most studied. The present work shows the relevance of metal bacterial bioremediation through the high number of studies aimed at understanding the microbiological mechanisms involved. Moreover, the developed processes applied in removal and/or reducing the resulting environmental metal contaminant/pollutant load have become a current and increasingly biotechnological issue for recovering impacted areas.     

Natural attenuation is enhanced in previously contaminated and coniferous forest soils

Purpose  

Prevalence of organic pollutants or their natural analogs in soil is often assumed to lead to adaptation in the bacterial community, which results in enhanced bioremediation if the soil is later contaminated. In this study, the effects of soil type and contamination history on diesel oil degradation and bacterial adaptation were studied.     

Volatile hydrocarbon emissions from a diesel fuel-contaminated soil bioremediation facility

Concerns have been expressed that emissions of volatile hydrocarbons (HCs) from bioremediation facilities containing soils contaminated with petroleum HCs may negatively impact regional air quality or human health. Little information is available regarding the emission of HCs from bioremediation sites, and few field studies have been performed during which the flux of HCs has been directly measured during bioremediation. To aid in answering questions about the impact of bioremediation facilities on the atmospheric environment, a two-part field study was conducted over summer 1996 at a remote landfarm in northern Ontario where diesel fuel-contaminated soil was undergoing bioremediation. Volatile total hydrocarbon (THC) atmospheric flux measurements were successfully taken over 18 days using a flux gradient micrometeorological technique incorporating a THC detector constructed in-house. Peak THC emissions reached 131 microg C/m2/sec shortly after implementation and tilling of the landfarm soil. The influence of soil temperature and tillage on THC emissions was examined. Off-site inhalation exposure was considered with the aid of an areal source model and results from speciated air samples collected on sorbent tubes and analyzed via gas chromatography/mass spectrometry (GCMS) techniques.     

农药污染土壤的生物修复技术

本文综述了土壤农药有机污染的生物修复技术 ,重点分析了植物、微生物对土壤农药污染的修复机制以及影响因子 ,介绍了几种生物修复技术     

Biostimulation and bioaugmentation enhances aerobic biodegradation of dichloroethenes

The accumulation of dichloroethenes (DCEs) as dominant products of microbial reductive dechlorination activity in soil and water represent a significant obstacle to the application of bioremediation as a remedial option for chloroethenes in many contaminated systems. In this study, the effects of biostimulation and/or bioaugmentation on the biodegradation of cis- and trans-DCE in soil and water samples collected from contaminated sites in South Africa were evaluated in order to determine the possible bioremediation option for these compounds in the contaminated sites. Results from this study indicate that cis- and trans-DCE were readily degraded to varying degrees by natural microbial populations in all the soil and water samples tested, with up to 44% of cis-DCE and 41% of trans-DCE degraded in the untreated soil and water samples in two weeks. The degradation rate constants ranged significantly (P<0.05) between 0.0938 and 0.560 wk(-1) and 0.182 and 0.401 wk(-1), for cis- and trans-DCE, respectively, for the various treatments employed. A combination of biostimulation and bioaugmentation significantly increased the biodegradation of both compounds within two weeks; 14% for cis-DCE and 18% for trans-DCE degradation, above those observed in untreated soil and water samples. These findings support the use of a combination of biostimulation and bioaugmentation for the efficient biodegradation of these compounds in contaminated soil and water. In addition, the results clearly demonstrate that while naturally occurring microorganisms are capable of aerobic biodegradation of cis- and trans-DCE, biotransformation may be affected by several factors, including isomer structure, soil type, and the amount of nutrients available in the water and soil.     

Plant aided bioremediation in the vadose zone: model development and applications

Phytoremediation has the potential to enhance clean up of land contaminated by various pollutants. A mathematical model that includes a two-fluid phase flow model of water flow as well as a two-region soil model of contaminant reactions was developed and applied to various bioremediation scenarios in the unsaturated zone, especially to plant-aided bioremediation. To investigate model behavior and determine the main parameters and mechanisms that affect bioremediation in unplanted and planted soils, numerical simulations of theoretical scenarios were conducted before applying the model to field data. It is observed from the results that parameters affecting the contaminant concentration in the water phase, such as aqueous solubility, the octanol-water partition coefficient, and organic carbon content of the soil controlled the contaminant fate in the vadose zone. Simulation using the developed model also characterized the fate and transport of the contaminants both in planted and unplanted soils satisfactorily for field applications. Although phytoremediation has the potential for remediation of contaminated soils, results from both modeling and field studies suggested that plants may not always enhance the remediation efficiency when the soil already has a high microbial concentration, when the contaminant bioavailability is low, or when the overall reaction is mass transfer-limited. Therefore, other steps to increase contaminant bioavailability are needed in phytoremediation applications; natural purification mechanisms such as aging, volatilization, and natural bioremediation should be considered to maximize the plant effect and minimize the cost.     

Enhanced bioremediation of soil from Tianjin,China, contaminated with polybrominated diethyl ethers

This work aimed to evaluate the effectiveness of nutrients, H₂O₂, and tourmaline on the bioremediation of fields where the soil was contaminated with polybrominated diethyl ethers (PBDEs). The results showed that 39.2, 38.3, and 48.1 % of total PBDE removal was observed in microcosms with the addition of nutrients, such as NaNO₃, NH₄Cl, and NH₄NO₃, respectively, compared to only 15.2 and 5.8 % of PBDE removal from soil with added Aspergillus niger and control soil, respectively, after 50 days of incubation. In addition, 50.8 and 56.5 % of total PBDE removal were observed in microcosms with 0.5 and 1 μL H₂O₂. The addition of tourmaline increased total PBDE removal to 32.4 %. Significant increases in soil enzymatic activity with PBDE degraders and bacterial communities were observed using polymerase chain reaction (PCR)—denaturing gradient gel electrophoresis (DGGE). These observations suggested that the combination of inorganic nutrients with chemical, mineral, and biological treatment could improve the PBDE removal efficiency. However, the combination of H₂O₂ and biological treatment processes is the most efficient technology. This combination of technologies would not cause adverse effects on the subsequent bioremediation process. Therefore, this work offers a potential alternative for the remediation of soil contaminated with PBDE pollutants.     

The application of bioassays as indicators of petroleum-contaminated soil remediation

Bioremediation has proven successful in numerous applications to petroleum contaminated soils. However, questions remain as to the efficiency of bioremediation in lowering long-term soil toxicity. In the present study, the bioassays Spirotox, Microtox, Ostracodtoxkit F, umu-test with S-9 activation, and plant assays were applied, and compared to evaluate bioremediation processes in heavily petroleum contaminated soils. Six higher plant species (Secale cereale L., Lactuca sativa L., Zea mays L., Lepidium sativum L., Triticum vulgare L., Brassica oleracea L.) were used for bioassay tests based on seed germination and root elongation. The ecotoxicological analyses were made in DMSO/H2O and DCM/DMSO soil extracts. Soils were tested from two biopiles at the Czechowice oil refinery, Poland, that have been subjected to different bioremediation applications. In biopile 1 the active or engineered bioremediation process lasted four years, while biopile 2 was treated passively or non-engineered for eight months. The test species demonstrated varying sensitivity to soils from both biopiles. The effects on test organisms exposed to biopile 2 soils were several times higher compared to those in biopile 1 soils, which correlated with the soil contaminants concentration. Soil hydrocarbon concentrations indeed decreased an average of 81% in biopile 1, whereas in biopile 2 TPH/TPOC concentrations only decreased by 30% after eight months of bioremediation. The bioassays were presented to be sensitive indicators of soil quality and can be used to evaluate the quality of bioremediated soil. The study encourages the need to combine the bioassays with chemical monitoring for evaluation of the bioremediation effectiveness and assessing of the contaminated/remediated soils.     

Effects of nutrient and temperature on degradation of petroleum hydrocarbons in contaminated sub-Antarctic soil

Mesocosm studies using sub-Antarctic soil artificially contaminated with diesel or crude oil were conducted in Kerguelen Archipelago (49 degrees 21' S, 70 degrees 13' E) in an attempt to evaluate the potential of a bioremediation approach in high latitude environments. All mesocosms were sampled on a regular basis over six months period. Soils responded positively to temperature increase from 4 degrees C to 20 degrees C, and to the addition of a commercial oleophilic fertilizer containing N and P. Both factors increased the hydrocarbon-degrading microbial abundance and total petroleum hydrocarbons (TPH) degradation. In general, alkanes were faster degraded than polyaromatic hydrocarbons (PAHs). After 180 days, total alkane losses of both oils reached 77-95% whereas total PAHs never exceeded 80% with optimal conditions at 10 degrees C and fertilizer added. Detailed analysis of naphthalenes, dibenzothiophenes, phenanthrenes, and pyrenes showed a clear decrease of their degradation rate as a function of the size of the PAH molecules. During the experiment there was only a slight decrease in the toxicity, whereas the concentration of TPH decreased significantly during the same time. The most significant reduction in toxicity occurred at 4 degrees C. Therefore, bioremediation of hydrocarbon-contaminated sub-Antarctic soil appears to be feasible, and various engineering strategies, such as heating or amending the soil can accelerate hydrocarbon degradation. However, the residual toxicity of contaminated soil remained drastically high before the desired cleanup is complete and it can represent a limiting factor in the bioremediation of sub-Antarctic soil.     

Biomarkers for monitoring efficacy of bioremediation by microbial inoculants

Bioaugmentation of contaminated sites with microbes that are adapted or genetically engineered for degradation of specific toxic compounds is an area that is currently being explored as a clean-up option. Biomarkers have been developed to track the survival and efficacy of specific bacteria that are used as inocula for bioremediation of contaminated soil. Examples of biomarkers include the luc gene, encoding firefly luciferase and the gfp gene, encoding the green fluorescent protein (GFP). The luc gene was used to tag different bacteria used for bioremediation of gasoline or chlorophenols. The bacteria were monitored on the basis of luciferase activity in cell extracts from soil. The gfp gene was also used to monitor bacteria during degradation of chlorophenol in soil, based on fluorescence of the GFP protein. Other biomarkers can also be used for monitoring of microbial inocula used for bioaugmentation of contaminated sites. The choice of biomarker and monitoring system depends on the particular site, bacterial strain and sensitivity and specificity of detection required.     

Biological remediation of explosives and related nitroaromatic compounds

Nitroaromatics form an important group of recalcitrant xenobiotics. Only few aromatic compounds, bearing one nitro group as a substituent of the aromatic ring, are produced as secondary metabolites by microorganisms. The majority of nitroaromatic compounds in the biosphere are industrial chemicals such as explosives, dyes, polyurethane foams, herbicides, insecticides and solvents. These compounds are generally recalcitrant to biological treatment and remain in the biosphere, where they constitute a source of pollution due to both toxic and mutagenic effects on humans, fish, algae and microorganisms. However, relatively few microorganisms have been described as being able to use nitroaromatic compounds as nitrogen and/or carbon and energy source. The best-known nitroaromatic compound is the explosive TNT (2,4,6-trinitrotoluene). This article reviews the bioremediation strategies for TNT-contaminated soil and water. It comes to the following conclusion: The optimal remediation strategy for nitroaromatic compounds depends on many site-specific factors. Composting and the use of reactor systems lend themselves to treating soils contaminated with high levels of explosives (e.g. at former ammunition production facilities, where areas with a high contamination level are common). Compared to composting systems, bioreactors have the major advantage of a short treatment time, but the disadvantage of being more labour intensive and more expensive. Studies indicate that biological treatment systems, which are based on the activity of the fungus Phanerochaete chrysosporium or on Pseudomonas sp. ST53, might be used as effective methods for the remediation of highly contaminated soil and water. Phytoremediation, although not widely used now, has the potential to become an important strategy for the remediation of soil and water contaminated with explosives. It is best suited where contaminant levels are low (e.g. at military sites where pollution is rather diffuse) and where larger contaminated surfaces or volumes have to be treated. In addition, phytoremediation can be used as a polishing method after other remediation treatments, such as composting or bioslurry, have taken place. This in-situ treatment method has the advantage of lower treatment costs, but has the disadvantage of a considerable longer treatment time. In order to improve the cost-efficiency, phytoremediation of nitroaromatics (and other organic xenobiotics) could be combined with bio-energy production. This requires, however, detailed knowledge on the fate of the contaminants in the plants as well as the development of efficient treatment methods for the contaminated biomass that minimise the spreading of the contaminants into the environment during post harvest treatment.     

Impact of metal stress on the production of secondary metabolites in <Emphasis Type="Italic">Pteris vittata</Emphasis> L. and associated rhizosphere bacterial communities

Plants adapt to metal stress by modifying their metabolism including the production of secondary metabolites in plant tissues. Such changes may impact the diversity and functions of plant associated microbial communities. Our study aimed to evaluate the influence of metals on the secondary metabolism of plants and the indirect impact on rhizosphere bacterial communities. We then compared the secondary metabolites of the hyperaccumulator Pteris vittata L. collected from a contaminated mining site to a non-contaminated site in Vietnam and identified the discriminant metabolites. Our data showed a significant increase in chlorogenic acid derivatives and A-type procyanidin in plant roots at the contaminated site. We hypothesized that the intensive production of these compounds could be part of the antioxidant defense mechanism in response to metals. In parallel, the structure and diversity of bulk soil and rhizosphere communities was studied using high-throughput sequencing. The results showed strong differences in bacterial composition, characterized by the dominance of Proteobacteria and Nitrospira in the contaminated bulk soil, and the enrichment of some potential human pathogens, i.e., Acinetobacter, Mycobacterium, and Cupriavidus in P. vittata’s rhizosphere at the mining site. Overall, metal pollution modified the production of P. vittata secondary metabolites and altered the diversity and structure of bacterial communities. Further investigations are needed to understand whether the plant recruits specific bacteria to adapt to metal stress.     

In situ bioelectrokinetic remediation of phenol-contaminated soil by use of an electrode matrix and a rotational operation mode

In situ bioremediation is a safe and cost-effective technology for the cleanup of contaminated sites, but its remediation rate is usually very slow. This study attempted to accelerate the process of bioremediation by employing non-uniform electrokinetic transport processes to mix organic pollutants and degrading bacteria in soils under in situ conditions (namely, in situ bioelectrokinetic remediation) by use of an electrode matrix and a rotational operation mode. A bench-scale non-uniform electrokinetic system with periodic polarity-reversal was developed for this purpose, and tested by using a sandy loam spiked with phenol as a model organic pollutant. The results demonstrated that non-uniform electrokinetic processes could enhance the in situ biodegradation of phenol in the soil, the efficiency of which depended upon the operational mode of the electric field. Compared with the unidirectional operation and the bidirectional operation, the rotational operation could effectively stimulate the biodegradation of phenol in the soil if adopting appropriate time intervals of polarity-reversal and electrode matrixes. A reversal interval of 3.0 h and a square-shaped electrode matrix with four electrode couples appeared appropriate for the in situ biodegradation of phenol, at which a maximum phenol removal of 58% was achieved in 10d and the bioremediation rate was increased about five times as compared to that with no electric field applied. The results also showed that adopting a small polarity-reversal interval and an appropriate electrode array could produce a high and uniform removal of phenol from the soil. It is believed that in situ bioelectrokinetic remediation holds the potential for field application.