Source origin of trace elements in PM from regional background,urban and industrial sites of Spain

Despite their significant role in source apportionment analysis, studies dedicated to the identification of tracer elements of emission sources of atmospheric particulate matter based on air quality data are relatively scarce. The studies describing tracer elements of specific sources currently available in the literature mostly focus on emissions from traffic or large-scale combustion processes (e.g. power plants), but not on specific industrial processes. Furthermore, marker elements are not usually determined at receptor sites, but during emission. In our study, trace element concentrations in PM₁₀ and PM_2.5 were determined at 33 monitoring stations in Spain throughout the period 1995–2006. Industrial emissions from different forms of metallurgy (steel, stainless steel, copper, zinc), ceramic and petrochemical industries were evaluated. Results obtained at sites with no significant industrial development allowed us to define usual concentration ranges for a number of trace elements in rural and urban background environments. At industrial and traffic hotspots, average trace metal concentrations were highest, exceeding rural background levels by even one order of magnitude in the cases of Cr, Mn, Cu, Zn, As, Sn, W, V, Ni, Cs and Pb. Steel production emissions were linked to high levels of Cr, Mn, Ni, Zn, Mo, Cd, Se and Sn (and probably Pb). Copper metallurgy areas showed high levels of As, Bi, Ga and Cu. Zinc metallurgy was characterised by high levels of Zn and Cd. Glazed ceramic production areas were linked to high levels of Zn, As, Se, Zr, Cs, Tl, Li, Co and Pb. High levels of Ni and V (in association) were tracers of petrochemical plants and/or fuel-oil combustion. At one site under the influence of heavy vessel traffic these elements could be considered tracers (although not exclusively) of shipping emissions. Levels of Zn–Ba and Cu–Sb were relatively high in urban areas when compared with industrialised regions due to tyre and brake abrasion, respectively.     

A comparative study on metal sorption by brown seaweed

This study compared the sorption of Ag, Cd, Co, Cd, Mn, Ni, Pb and Zn by a Ca-treated Sargassum biomass at pH 5.0, under low and high ionic strength (IS) conditions. The sorption isotherms of As [As(V)] and Cr [Cr(III) and Cr(VI)] were also determined at low IS. The isotherm data for the eight cationic metals and Cr(III) were well fitted by Langmuir equations. Generally, the maximum metal uptake (Umax) followed: Cr(III) > Pb approximately Cu > Ag approximately Zn approximately Cd > Ni approximately Mn approximately Co > Cr(VI) > As(V) at low IS and Pb > Cu > Co > Mn approximately Cd > Zn approximately Ag > Ni at high IS. As(V) did not bind to the seaweed at pH 5.0. The results indicated that sorption of Pb was not affected by the increasing IS, though the percentage of free Pb ions in the water was greatly reduced as predicted by the speciation model. High IS lowered Umax by 10-36% (except Co and Pb), and lowered the affinity constant of the metal by 33-91% for all cationic metals, as compared to low IS. Moreover, the removal efficiency of the cationic metals and Cr decreased exponentially with initial metal concentrations and was lower at high IS. Ion-exchange was the mechanism responsible for the cationic metal sorption onto the seaweed, and Na ion interfered with the cationic metal binding through electrostatic interaction. In conclusion, this study showed the differential binding capacity of the Sargassm biomass for different metals and oxidation states and the differential effects of IS. According to the present results, Sargassum may be considered a good biosorbent for cationic metals (especially Pb) in both low and high-salt containing wastewater.     

Metal concentrations and mobility in marine sediment and groundwater in coastal reclamation areas: a case study in Shenzhen, China

The concentrations of metals in the buried marine sediment and groundwater were differently affected by land reclamation. Nine metals (V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb) in sediment and coastal groundwater from reclamation areas in Shenzhen were examined. The gradually decreased concentrations (V, Cr, Mn, Ni, Cu, Zn) in sediment and relatively higher concentrations (V, Cr, Mn, Co, Ni, Cu and Cd) in groundwater within reclamation areas were observed. The increase of V, Cr, Mn, Ni, Cu and Cd concentrations in groundwater within reclamation areas subsequently after land reclamation should be resulted from the mobilization of these metals accumulated in the sediment. These metals appear to be easily mobilized from solid phase to solution phase after reclamation. The physico-chemical changes such as reduction in pH and salinity in water environment induced by land reclamation appear to be responsible for metal mobility in the sediment-groundwater system.     

Levels of metals, PCBs, PCNs and PAHs in soils of a highly industrialized chemical/petrochemical area: temporal trend

In 2005, the concentrations of various metals and organic pollutants were analyzed in soils collected in different areas of Tarragona (Catalonia, Spain), where an important chemical/petrochemical complex is located. The levels of seven elements (As, Cd, Cr, Hg, Mn, Pb and V), as well as those of polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs) were determined in soils, and compared with those obtained in a background study carried out in 2002. Only Cd and Pb showed significant higher concentrations in the petrochemical zone, while no significant differences were found for the remaining elements. In turn, vanadium was the only element showing a significant increase in the concentration between 2002 and 2005. With regard to the organic pollutants, no significant differences were found according to the area of sampling. However, an increase in naphthalene levels was observed during the period 2002-2005 in soils of the chemical and petrochemical areas. According to the present results, it is suggested that the levels of vanadium must be periodically monitored to assure that the important industrialization of Tarragona does not mean health risks for the population living near the complex.     

Heavy metal surveys in Nordic lakes; concentrations, geographic patterns and relation to critical limits

In the autumn of 1995, coordinated national lake surveys were conducted in the Nordic countries, including Russian Kola. The 11 metals (Pb, Cd, As, Zn, Cu, Ni, Co, Fe, Mn, Cr, V) investigated in nearly 3000 lakes have generally low concentrations and distinct geographical patterns. Direct and indirect influence of long-range transported air pollution is the major important factor for distribution of Pb, Cd, Zn and to a certain degree Co. Total organic carbon (TOC) concentrations in lakes are important for Fe and Mn but also to a certain degree for As, Cr and V. Bedrock geology is the major controlling factor for Cu and Ni, with the exception of areas around the smelters in the Kola peninsula, where the Cu and Ni concentrations in lakes are very high due to local airborne pollution. Bedrock and surficial geology is also an important factor for controlling the concentrations of As, Co, Cr and V. The results indicate that heavy metal pollution in lakes is a minor ecological problem on a regional scale in the Nordic countries.     

Trace metal and metalloid levels in surface water of Marcal River before and after the Ajka red mud spill, Hungary

The aim of this study was to compare and assess the dissolved concentrations of trace elements (As, Zn, Hg, Cd, Cr, Ni, Pb and Cu) in surface water of Marcal River before and after the red mud spill that occurred in Ajka, western Hungary, in October 2010. The caustic sludge flooded the surrounding settlements and polluted the nearby Torna Creek, which flows through the Marcal and Raba rivers into the Danube. A total of 92 surface water samples were collected from the Marcal River in the period of 2007–2012 and analysed for dissolved trace metal(loid)s by atomic absorption spectroscopy method. After the spill, the water management authority initially focused on acid dosing of surface waters to lower pH and was effective in lowering both pH and metal(loid) concentrations. Among the dissolved trace metal(loid)s, arsenic and nickel levels were moderately higher in the Marcal River 2 years since the spill compared to that observed in the pre-disaster period. The concentrations of dissolved trace metal(loid)s did not exceed the European water quality standards and the US Environmental Protection Agency aquatic life criteria values (excluding one sample for cadmium).     

Transport and attenuation of metal(loid)s in mine tailings amended with organic carbon: Column experiments

A laboratory-scale column experiment was conducted to evaluate the effect of organic carbon amendments on the mobility of As, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Tl and Zn in mine tailings. Three columns were packed with sulfide- and carbonate-rich tailings, which were amended with a 1:1 (vol.) mixture of peat and spent brewing grain at proportions of 0, 2 and 5vol.%. A simulated input solution characterized by circumneutral pH and elevated concentrations of SO(4) and S(2)O(3) was passed through the columns for 540 days. The input solution contained low concentrations of metal(loid)s during the initial 300 days and elevated concentrations thereafter. Decreases in mass transport of S(2)O(3) were observed in all columns; with increased attenuation observed at 5 vol. % organic carbon content. Removal of Mn, Ni, Cu, Sb and Mo was observed in all columns during the initial 300 days. However, during this time, mobilization of Fe, As, Zn and Pb was observed, with the greatest increases in concentration observed at the higher organic carbon content. During the final 240 days, S(2)O(3) removal was enhanced in columns containing organic carbon, and Fe, Mn, Ni, Tl, As and Sb removal also was observed. This study demonstrates the influence of organic carbon amendments on metal(loid) mobility in mine tailings. Decreases in mass discharge of metal(loid)s may be achieved using this technique; however, site-specific geochemical conditions must be considered before field-scale implementation.     

Mobility of heavy metals from polluted sediments of a semi-enclosed basin: in situ benthic chamber experiments in Taranto’s Mar Piccolo (Ionian Sea,Southern Italy)

In situ benthic flux experiments were conducted at two stations in the Mar Piccolo of Taranto (Italy), one of the most industrialised and contaminated coastal areas of the Mediterranean. Sediments of the two stations are notably different in their trace metal content, with a station closer to a Navy harbour showing higher mean concentrations of almost all investigated metals (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn). Conversely, both stations are characterised by significant Hg contamination, compared to the local baseline. Results of a sequential extraction scheme on surface sediments suggest a relatively scarce mobility of the examined metals (Zn > Ni > Cr > As > Cu > Pb). A Hg-specific extraction procedure showed that most of the element (93.1 %) occurs in a fraction comprising Hg bound to Fe/Mn oxi-hydroxides. Reduction of these oxides may affect Hg remobilisation and redistribution. Porewater profiles of dissolved trace metals were quite similar in the two sites, although significant differences could be observed for Al, Cu, Fe and Hg. The highest diffusive fluxes were observed for As, Fe and Mn. Mobility rates of several trace elements (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn) were directly measured at the sediment–water interface. Results from benthic in situ incubation experiments showed increasing dissolved metal concentrations with time, resulting in higher fluxes for Cu, Fe, Hg, V and Zn in the most contaminated site. Conversely, fluxes of Mn, Ni and Pb were comparable between the two stations. The estimated flux of Hg (97 μg m^?2 day^?1) was the highest observed among similar experiments conducted in other highly contaminated Mediterranean coastal environments. Benthic fluxes could be partially explained by considering rates of organic matter remineralisation, dissolution of Fe/Mn oxy-hydroxides and metal speciation in sediments. Seasonal and spatial variation of biogeochemical parameters can influence metal remobilisation in the Mar Piccolo area. In particular, metals could be promptly remobilised as a consequence of oxygen depletion, posing a serious concern for the widespread fishing and mussel farming activities in the area.     

An evaluation of the PM2.5 trace elemental composition in the Venice Lagoon area and an analysis of the possible sources

Global emissions reported by many authors have shown as natural and anthropic sources can contribute to the principal aerosol classes, but values change according the local scenario. The Venice Lagoon is exposed to different anthropic source emissions like vehicular traffic, industrial thermoelectric power plant, petrochemical plant, incinerator plant, domestic heating, ship traffic, glass factories and airport. Samplings of PM_2.5 were daily performed between March and November 2007 in Sacca San Biagio island (Venice), and values of PM_2.5 concentration and element concentration were obtained. Monthly average concentrations (μg m^?3) during this period show higher values during the spring and the autumn. A good relationship between data obtained and concentration values from environmental local agencies is evidenced, both for PM_2.5 from urban area (Venezia Mestre), and for PM₁₀ sampled in the same area, as well as the influence of some meteorological parameters on PM_2.5 concentration sampled. Trace elements samples were measured by an Inductively Coupled Plasma-Quadrupole Mass Spectrometry (ICP-QMS), and values (ng m^?3 and μg g^?1) for elements regulated by European directives (As, Cd, Ni, Pb), as well as, other elements (Na, Al, K, Ti, V, Mn, Fe, Co, Zn, Se, Ag) are also reported. Data analysis by mean of Principal Component Analysis (PCA) and Positive Matrix Factorization (PMF) pointed out four principal groups of elements like Mn–Fe–K, As–Se–Cd, V–Co, and Pb that could be assigned to specific sources of the Venetian wetland basin.     

The influence of body size, condition index and tidal exposure on the variability in metal bioaccumulation in Mytilus edulis

Mussels are commonly used to monitor metal pollution despite high inter-individual variability in tissue concentrations. In this study, influences of body size, condition index and tidal height on concentrations of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn were investigated. Body weight was inversely related to metal concentrations and for Cd, Mn, Pb and Zn the regression was affected by tidal height. Except for As, Fe and Mn metal concentrations were inversely related to physiological status though no differences between essential and non-essential metals were obvious. After correcting for body size, tidal height was related positively to As, Cd and Zn, negatively related to Cu, Fe and Mn while Co, Cr, Ni and Pb were independent of tidal height. The study recommends stringent measures during sampling for biomonitoring or metal concentrations at each location must be normalized to a common body size, CI and tidal height.     

The use of a sequential leaching procedure for heavy metal fractionation in green liquor dregs from a causticizing process at a pulp mill

A five-stage sequential leaching procedure was used to fractionate heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Ni, Co, As, V, Ba and Ti) in green liquor dregs into the following fractions: (1) water-soluble fraction (H2O), (2) exchangeable fraction (CH3COOH), (3) easily reduced fraction (HONH3Cl), (4) oxidizable fraction (H2O2 + CH3COONH4), and (5) residual fraction (HF + HNO3 + HCl). The green liquor dregs were derived from a causticizing process at a pulp mill at Kemi, Northern Finland. According to the leaching studies, the leachability of heavy metals in the water-soluble fraction varied between 0.5 and 2 mg kg(-1) expressed on a dry weight (d.w.) basis, indicating relatively low bioavailability of the metals. However, the concentration of Mn (2065 mg kg(-1); d.w.) showed a strong and of Zn (17.6 mg kg(-1); d.w.), Ni (39.7 mg kg(-1); d.w.) and Ba (32.0 mg kg(-1); d.w.) slightly tendency to be extracted in the exchangeable fraction. In addition, Zn, Mn, Ni, Co, V and Ba showed clear leachability in the easily reduced fraction, as well as Cd, Cu, Cr, Zn, Mn, As and Ba in the oxidizable fraction. For Cd, Cu, Cr, Zn, Mn, Ni, Co, Ba and Ti, the sum of leachable heavy metal concentrations in fractions 1-5 agreed relatively well with the "total" heavy metal concentrations. Recoveries of the sum of fractions 1-5 were 84-56% of those obtained by the US EPA method 3052 (i.e. concentrations obtained after microwave oven digestion with a mixture of HF and HNO3).     

A comparison of Cu, Pb, As, Cd, Zn, Fe, Ni and Mn determined by acid extraction/ICP-OES and ex situ field portable X-ray fluorescence analyses

Total concentrations of Cu, Pb, As, Cd, Zn, Fe, Ni and Mn were determined for 81 soil samples using two types of field portable X-ray fluorescence (FPXRF) system; dual isotope and X-ray tube. FPXRF metal concentrations were statistically compared with analytical results from aqua regia extractions followed by Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) analysis. The ability of each FPXRF instrument to produce analytical results comparable to the reference method was assessed by linear regression. A high degree of linearity was found for Fe and Pb with the X-ray tube instrument and for Fe, Cu, Pb, Zn, Cd and Mn with the dual source instrument. FPXRF analyser performance improved with increased analysis time for Cu, Mn and Pb, whilst Fe, Zn, Cd, Ni and As showed no significant improvement. Particle size did not influence FPXRF analyser performance. Both the dual isotope and the X-ray tube FPXRF instruments are effective tools for rapid, quantitative assessment of soil metal contamination and for monitoring the efficacy of remediation strategies.     

Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant

Background, Aim and Scope

The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.

Materials and Methods

Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.

Results

The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).

Discussion

The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.

Conclusions

Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.

Recommendations

There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.

Perspectives

According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.

     

西湖沉积物中元素分布特征研究

分析测定了西湖沉积物（２０ｍ钻探样品）不同层次中Ｆｅ、Ａｌ、Ｃａ、Ｍｇ、Ｔｉ、Ｍｎ、Ｃｕ、Ｚｎ、Ｃｄ、Ｎｉ、Ｈｇ、Ｃｒ、Ａｓ、Ｃｏ、Ｖ等１５种元素的含量，并根据元素的分布特征探讨了西湖沉积物的形成发展及重金属污染状况。     

Specific accumulation of cadmium and other trace elements in Sarcodon imbricatus using ICP-MS with a chemometric approach

Fungi can effectively accumulate various metallic elements, metalloids and non-metals in fruiting bodies. This study provides information on the accumulation of Ag, As, Ba, Cd, Co, Cs, Cu, Cr, Li, Mn, Ni, Pb, Rb, Sr, V, Tl, U and Zn in the edible mushroom Sarcodon imbricatus (L.) P. Karst. using the technique of inductively coupled plasma – mass spectrometry with a dynamic reaction cell mode. Mushrooms were foraged from four regions in Poland. Baseline concentrations of minerals, expressed in mg kg^?1 dry biomass (db), were in the composite samples of caps in the range: for Ag (0.27–0.29), As (1.0–1.9), Ba (0.31–0.45), Cd (4.5–6.3), Co (0.23–1.9), Cu (28–35), Cr (0.19–0.29), Cs (20–38), Li (0.013–0.020), Mn (5.9–8.8), Ni (0.81–1.4), Pb (0.94–1.6), Rb (490–700), Sr (0.14–0.19), Tl (0.058–0.11), U (0.002–0.002), V (0.044–0.054) and Zn (140–160). Concentration levels of Ag, As, Cd, Cs, Pb and Zn were higher in caps than in stipes of S. imbricatus, whereas for other elements the distribution between caps and stipes was nearly equal or for some differed depending on the location. Certainly, the content of toxic Cd in S. imbricatus was elevated (0.45–0.63 mg kg^?1 in fresh caps) and therefore eating this mushroom could increase exposure to Cd. In addition, the content of toxic As in S. imbricatus was elevated.     

Metals in edible fish from Vistula River and Dead Vistula River channel, Baltic Sea

Metals including Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were determined in muscle tissue of 12 fish species by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and cold vapour-atomic absorption spectroscopy (CV-AAS). Fish were collected from Vistula River at lower course and Dead Vistula River channel in south of Baltic Sea in Poland. The fish species examined include Round Goby (Neogobius melanostomus), Crucian Carp (Carassius carassius), Bull-rout (Myoxocephalus scorpius), Tench (Tinca tinca), Bream (Abramis brama), Burbot (Lota lot), Perch (Perca perca), Roach (Rutilus rutilus), Silver Carp (Hypophthalmichthys molitrix), Pikeperch (Stizostediun lucioperca), Brown salmon (Salmo trutta m. Trutta) and Eel (Anguilla anguilla). The median values of metal concentrations in fresh muscle tissue of 11 fish species varied as follows: Al < 0.5-60; Ba < 0.05-0.31; Ca 120-1800; Cd < 0.05-0.096; Co < 0.10; Cr < 0.10-0.50; Cu < 0.15-0.77; Fe 1.5-21; Hg 0.0058-0.65; K 1800-4200; Mg 130-560; Mn 0.12-0.59; Na 350-840; Ni < 0.2-0.31; Pb < 0.75; Sr 0.079-2.9; Zn 3.3-23 μg/g fresh weight. The Target Hazard Quotient (THQ) values calculated in this study for Cd and Hg from muscles of fish species collected from Vistula River were low in the range of 0.4 for Hg and 0.8 for Cd.     

Characteristics and impacts of trace elements in atmospheric deposition at a high-elevation site,southern China

To investigate the regional background trace element (TE) level in atmospheric deposition (dry and wet), TEs (Fe, Al, V, Cr, Mn, Ni, Cu, Zn, As, Se, Mo, Cd, Ba, and Pb) in 52 rainwater samples and 73 total suspended particles (TSP) samples collected in Mt. Lushan, Southern China, were analyzed using inductively coupled plasma-mass spectrometry (ICP-MS). The results showed that TEs in wet and dry deposition of the target area were significantly elevated compared within and outside China and the volume weight mean pH of rainwater was 4.43. The relative contributions of wet and dry depositions of TEs vary significantly among elements. The wet deposition fluxes of V, As, Cr, Se, Zn, and Cd exceeded considerably their dry deposition fluxes while dry deposition dominated the removal of pollution elements such as Mo, Cu, Ni, Mn, and Al. The summed dry deposition flux was four times higher than the summed wet deposition flux. Prediction results based on a simple accumulation model found that the content of seven toxic elements (Cr, Ni, Cu, Zn, As, Cd, and Pb) in soils could increase rapidly due to the impact of annual atmospheric deposition, and the increasing amounts of them reached 0.063, 0.012, 0.026, 0.459, 0.076, 0.004, and 0.145 mg kg^?1, respectively. In addition, the annual increasing rates ranged from 0.05% (Cr and Ni) to 2.08% (Cd). It was also predicted that atmospheric deposition induced the accumulation of Cr and Cd in surface soils. Cd was the critical element with the greatest potential ecological risk among all the elements in atmospheric deposition.     

Studies on metal content in the brown seaweed, Fucus vesiculosus, from the Archipelago of Stockholm

Concentrations of eleven metals (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) were determined in the brown seaweed Fucus vesiculosus collected from the Archipelago of Stockholm. Several factors which influence the metal content in the seaweed have been studied, including errors caused by epiphytes, sea exposure and differences depending on which part of the seaweed is analysed. It is concluded that, if all these factors are considered, Fucus vesiculosus plants are excellent bio-indicators of metal pollution. This is also demonstrated by a significant increase in metal content in transplanted Fucus vesiculosus near the city of Stockholm. The results from this investigation also indicate increasing metal concentrations, especially Cd, in samples from the northern parts of the Archipelago and the reason for this is discussed.     

Status of metal levels and their potential sources of contamination in Southeast Asian rivers

To assess the concentration and status of metal contaminants in four major Southeast Asian river systems, water were collected from the Tonle Sap–Bassac Rivers (Cambodia), Citarum River (Indonesia), lower Chao Phraya River (Thailand), and Saigon River (Vietnam) in both dry and wet seasons. The target elements were Be, Al, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Ba, Tl, and Pb and the concentrations exceeded the background metal concentrations by 1- to 88-fold. This distinctly indicates enrichment by human urban area activities. The results of a normalization technique used to distinguish natural from enriched metal concentrations confirmed contamination by Al, Cd, Co, Mn, Ni, Pb, and Zn. Cluster analysis revealed the probable source of metals contamination in most sampling sites on all rivers studied to be anthropogenic, including industrial, commercial, and residential activities. Stable lead isotopes analyses applied to track the sources and pathways of anthropogenic lead furthermore confirmed that anthropogenic sources of metal contaminated these rivers. Discharges of wastewater from both industrial and household activities were major contributors of Pb into the rivers. Non-point sources, especially road runoff and street dust, also contributed contamination from Pb and other metals.