The fate of heavy metals in green waste composting

It has long been known that heavy metals, when in high enough concentration, have the potential to be both phytotoxic and zootoxic. Heavy metals are frequently found as contaminants in green waste. Any such waste that is subsequently segregated for composting theoretically has the potential to retain that possible contamination. To date, there have been a limited number of publications addressing this issue. Most reports have concentrated on the types of heavy metals found in compost and their acceptable levels, rather than the fate of heavy metal contaminants throughout the composting process. This investigation was aimed to identify the fate of cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb) and zinc (Zn) concentrations throughout a fourteen week composting cycle. The results of this study showed a general increase in the removal of Pb, Cu, Cr, and to a much smaller extent Zn, manifested by a decrease in their overall concentrations within the solid fraction of the final product, by 93, 49, 43, and 20 percent respectively. By contrast, there was no decrease in the overall concentration of Cd.     

The maturity tests during the composting of municipal solid wastes

This study investigated at first the evolution of co-composting process of municipal solid waste and sewage sludge under Tunisian pedo-climatic conditions.Results showed that the temperature profiles established in the system revealed three classical steps, the mesophilic phase during the first 25 days, the thermophilic phase between 30 and 130 days and the cooling phase began after the 14th week in the two windrows W1 (100% of municipal solid wastes) and W2 (60% of municipal solid wastes and 40% of dried sewage sludge). Potential toxic heavy metal content appeared generally more important in W2 than W1, and both finished products of compost obtained in this study satisfied most parts of the recommended norms of agronomical use. The presence or absence of nitrifying activity allowed determining that the compost W1 was more mature than the compost W2.Composting cannot only transform waste by reducing its harmful effect but also corrects when added to soil, the deficit in organic matter. The nature of the raw material used in composting may affect the quality of the final product. There is a significant need for the amendment of soils by compost. The quality of the amendment may have a significant impact on environment.     

Chemical characterization of synthetic soil from composting coal combustion and pharmaceutical by-products

Land application of coal combustion by-products (CCBs) mixed with solid organic wastes (SOWs), such as municipal sewage sludge, has become increasingly popular as a means of productively using what were once considered waste products. Although bulk chemical and physical properties of several of these CCB-SOW materials have been reported, detailed information about their synthesis and mineralogy of the CCB-SOW materials has not been reported. In this paper, chemical and mineralogical properties of a soil-like material obtained from composting a mixture of CCBs with a pharmaceutical fermentation by-product (FB) were investigated at the laboratory and field scale. All starting materials and products were characterized by X-ray diffraction (XRD), fourier transform infrared (FFIR) spectroscopy, and elemental analyses. The results showed that the FB was strongly bound to the CCBs and could not be removed by washing. Within 2 wk of the start of a composting study, there was a rapid drop in pH from 12 to 8, an increase in temperature to 70 degrees C, and a reduction in the dissolved oxygen content, attributed to the rapid establishment of a highly active microbial population. Composting produced a soil-like material with high levels of plant nutrients, a high nutrient retention capacity, and metal contents similar to median levels of those metals reported for soils. The levels of boron and soluble salts are such that sensitive plants may initially show toxicity symptoms. However, with adequate rainfall, leaching should rapidly remove most of the B and soluble salts. With care, the material produced is safe for use as a synthetic topsoil.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

Composting and compost application in China

The current situation of municipal solid waste (MSW) and sewage sludge production (in terms of volume as well as composition) in China is introduced. Composting and compost application in China are reviewed. In China, the production of municipal solid waste and sewage sludge is changing rapidly along with economic development. Composting is mainly applied for treating MSW, about 20% of the total amount of MSW being disposed. MSW composting is mainly co-composted with night soil or sewage sludge. Compost is used in agriculture, forestry and horticulture. Compost application is the key factor influencing the composting development in China. To promote composting and compost application in China, a state-wide survey on the production, composition and physical and chemical properties of MSW and sewage sludge should be carried out. More effort should be made to develop low cost and high efficient composting technologies according to China's conditions. The environmental impact of compost application should also be given more attention.     

Environmental and economic analysis of management systems for biodegradable waste

The management system for solid and liquid organic waste affects the environment and surrounding technical systems in several ways. In order to decrease the environmental impact and resource use, biological waste treatment and alternative solutions for sewage treatment are often advocated. These alternatives include increased agricultural use of waste residuals. To analyse whether such proposed systems indicate improvements for the environment and its sustainability, systems analysis is a useful method. The changes in environmental impact and resource use is not only a result of changes in waste treatment methods, but also largely a result of changes in surrounding systems (energy and agriculture) caused by changes in waste management practices. In order to perform a systems analysis, a substance-flow simulation model, the organic waste research model (ORWARE), has been used. The results are evaluated by using methodology from life cycle assessment (LCA). An economic analysis was also performed on three of the studied scenarios. The management system for solid organic waste and sewage in the municipality of Uppsala, Sweden, was studied. Three scenarios for different treatments of solid waste were analysed: incineration with heat recovery, composting, and anaerobic digestion. These three scenarios included conventional sewage treatment. A fourth scenario reviewed was anaerobic digestion of solid waste, using urine-separating toilets and separate handling of the urine fraction. The results are only valid for the case study and under the assumptions made. In this case study anaerobic digestion result in the lowest environmental impact of all the solid waste management systems, but is costly. Economically, incineration with heat recovery is the cheapest way to treat solid waste. Composting gives environmental advantages compared to incineration methods, without significantly increased costs. Urine separation, which may be implemented together with any solid waste treatment, has great advantages, particularly in its low impact on the environment. However, there is a large increase in acidification.     

Production of vermifertilizer from guar gum industrial wastes by using composting earthworm <Emphasis Type="Italic">Perionyx sansibaricus</Emphasis> (Perrier)

Efforts have been made to convert the guar gum industrial waste into a value-added product, by employing a new earthworm species for vermicomposting e.g. Perionyx sansibaricus (Perrier) (Megascolecidae), under laboratory conditions. Industrial lignocellulosic waste was amended with other organic supplements (saw dust and cow dung); and three types of vermibeds were prepared: guar gum industrial waste + cow dung + saw dust in 40: 30: 30 ratio (T₁), guar gum industrial waste + cow dung + saw dust in 60: 20: 20 ratio (T_2,), and guar gum industrial waste + cow dung + saw dust in 75: 15: 10 ratio (T₃). As compared to initial concentrations, vermicomposts exhibited a decrease in organic C content (5.0–11.3%) and C:N ratio (11.1–24.4%) and an increase in total N (18.4–22.8%), available P (39.7–92.4%), and exchangeable K (9.4–19.7%) contents, after 150 days of vermicomposting. A vermicomposting coefficient (VC) was used to compare of vermicomposting with the experimental control (composting). P. sansibaricus exhibited maximum value of mean individual live weight (742.8 ± 21.1 mg), biomass gain (442.94 ± 21.8 mg), growth rate (2.95 ± 0.15 mg day⁻¹), cocoon numbers (96.0 ± 5.1) and reproduction rate (cocoons worm⁻¹ day⁻¹) (0.034 ± 0.001) in T₂ treatment. In T₃ maximum mortality (30.0 ± 4.01 %) in earthworm population was observed. Overall, T₂ vermibed appeared as an ideal substrate to manage guar gum industrial waste effectively. Vermicomposting can be proposed as a low-input basis technology to convert industrial waste into value-added biofertilizer.     

Refuse treatment options: a case study

Records in public archives were evaluated for the period 1981-1991. Simple surveys of peoples and of technology and physical premises provided insight to gauge the attitudes of a local community in the Melbourne municipality and the Melbourne City Council towards composting of organic waste materials. There is a lag in perception and attitudes between the local community and the local government towards composting of organic refuse as a solid waste treatment option. The simple methodology of the study still made it possible to verify past and present perceptions and attitudes.     

Quality assessment of composts in the Greek market: the need for standards and quality assurance

An extensive data survey and study of the Greek market for composts or products marketed as such was carried out in order to acquire a comprehensive image of the local situation, in view of the proposed operation of large municipal solid waste (MSW) composting facilities and EU legislation changes. Physical and chemical parameters (moisture, organic matter, electrical conductivity, pH and heavy metals), stability indicators (self-heating potential, germination index) and biological indicators (microbial population, pathogen indicators and selected pathogens) were analyzed for the assessment of product quality. Results revealed wide variations even within the same group of products, which is particularly significant for parameters directly related to environmental protection and public health. The heavy metal content ranged from levels exceeding the fairly lenient Greek standards to below the stringent limits for A+ class compost in Austria. About 25% of the composts examined met the heavy metal limits for the EU eco-label award. Salmonella spp. was not detected in any of the composts but Staphylococcus aureus and Clostridium perfringens were found in 17 and 96% of the composts respectively. Pathogen indicator microorganisms were present at levels above suggested limits in all the composts. The high variability of such important parameters in composts available on the Greek market suggests an urgent need for establishing quality assurance procedures and mechanisms in the country. Moreover, the wide range of limit values within EU member states suggests the need for developing EU compost quality standards, in order to harmonize the compost markets.     

Management of biomass residues generated from palm oil mill: Vermicomposting a sustainable option

Solid waste management is one of the challenging problems worldwide and it is becoming more complex by the increase in population and subsequently the waste generated. In Malaysia, among industrial solid waste palm oil mill waste (POMW) contributes the highest share. Wastes from the oil palm mill includes palm oil mill effluent (POME), decanter cake, empty fruit bunches, seed shells and the fibre from mesocarp. Generally most of the waste generated is either disposed of via open dumping or used as fertilizers as such or as animal feed. Land application of POMW and POME is very common practice as it contains numbers of plant nutrients. Direct application of POMW into agricultural soil can result in a number of problems such as water pollution, leaching etc. To deal with these problems, vermicomposting of palm oil mill waste may be a sustainable waste management option.There are number of researches going on management of biomass residues from palm oil mill, but very few works are going on vermicomposting of these agro-industrial waste. Vermicomposting of POMW can be a good practice as it will also be helpful in recycling the useful plant nutrients and it is better than that of composting process. Present review deals with the various aspects of vermicomposting of POMW and its importance. Review also put forward the effect of potential application of vermicompost on plant growth. On the whole it looks for the possibility of vermicomposting of waste from palm oil mill as a sustainable waste management alternative.     

Management of Fly Ash Through Vermicomposting: A Rational Approach

Fly ash is a by‐product of coal combustion in thermal power plants. Its generation poses several environmental problems, the most important ones being its capacity for causing pollution and the need for large storage areas to keep it out of the environment. Fly ash management remains a major concern in the 21st century; however, despite these challenges, the material has great potential for beneficial use in agriculture due to its efficacy in modifying and improving soil health and improving crop performance. Vermicomposting is an excellent technique for reducing the toxic heavy metals in fly ash through the introduction of earthworms. The activities of several earthworm species minimize the solubility of heavy metals and increase the bioavailability of major nutrient elements such as phosphorous (P) and nitrogen (N). This article provides a comprehensive review of the scope and benefits of vermiremediating fly ash, demonstrating the abilities of different species of earthworms to accumulate heavy metals and increase the availability of plant nutrients. On the basis of a literature survey, the authors have concluded that adopting vermicomposting technology promises increased, effective fly ash utilization for agricultural benefits.     

Effect of collection system on mineral content of biowaste

The EU is committed to encourage biological treatments of organic waste as an alternative to landfill and also to enhance organic matter recycling. When these wastes are composted, the composition of the initial raw materials is very important in order to obtain a good quality product. In this article, the mineral composition of the organic fraction obtained from source-sorted collection (SC) and the organic fraction mechanically separated (MS) from mass-collected municipal solid waste was evaluated. Also, the compositions of these 2 raw materials that are used in the current Spanish municipal solid waste biological treatment facilities were compared. The mineral elements analyzed were the total content of the heavy metals Zn, Cu, Ni, Cr, Pb and Cd, and the plant nutrients P, K, Na, Ca, Mg, Fe and Mn. The results obtained were expressed on dry matter basis and on mineral matter basis. Important differences were detected between SC and MS samples, on both dry and mineral matter basis. In general, nutrient contents are higher in SC than in MS, and heavy metal contents are significantly lower in SC. Our results also support the idea that the heavy metal migration from the non-compostable materials to the decomposable matrix takes place from the beginning of the process while both types of materials are in contact.     

Landfill Bioreactor Cells as Ecofilters for Extraction of Bio-energy and Nutrients from Solid Wastes

This paper describes a modified, ecologically based waste treatment technique, where municipal solid waste is anaerobically treated in landfill reactorcells in a way that both bio-energy and nutrients can be recovered. The controlled landfill reactorcell ('bioreactor-cell') serves as an anaerobic filter, where energy is extracted as biogas while nutrients are recovered through the leachates. The leachates can be used as fertilizer in e.g. energy forests within the controlled landfill area, and thus nutrients can be brought back into an ecocycle. At the same time anaerobic conditions result in an effective immobilization of heavy metals and other pollutants, e.g. through complexation to organic matter or as insoluble metal sulphides, which are immobilized in the fermentation residue. The long-lived organic fraction, remaining after the fermentation process has declined, containing a high content of lignine, serves as a water-holding matrix. Thus it helps to enforce a sustainable high moisture level, resulting in sustainable anaerobic conditions with heavy metals retained on a long-term basis. Also non-degradable products, like plastics, help to shield off oxygen and maintain reliable anaerobic conditions. Landfilling of organic matter under anaerobic conditions is a measure to counteract increasing concentrations of CO₂ in the atmosphere, resulting from human activities. A small fraction of the organic matter is long-term accumulated in the landfill, and the processes can be compared to those of natural wetlands.     

Evaluation of municipal solid waste composting kinetics

Most modern municipal solid waste (MSW) composting operations have emphasized the enhancement of decomposition of the organic fraction of the waste to comply with strict environmental regulations. This can be achieved once the composting process kinetics are well understood. This study examined process kinetics through experimentation with bench-scale reactors under controlled composting conditions to show the interdependence between biological, chemical and physical factors during composting of MSW. The effects of temperature, moisture content, waste particle size and carbon to nitrogen (C/N) ratio on process kinetics were evaluated. The results obtained revealed that these factors should be carefully controlled in order to achieve optimum process performance. It has been found that the organic matter degradation during composting follows a first-order kinetic model.     

Anaerobic treatment with methane recovery of agricultural and village wastes

To provide more efficient utilization of village wastes and agricultural residues and eliminate pollution from current practices anaerobic treatment of such wastes with methane recovery is proposed. This paper describes studies to determine the performance of anaerobic composting for such wastes.Composting of three waste types was investigated: (a) agricultural residues, (b) Village solid waste and 1:1 mixture of (a) and (b). Three 150 gallon reactors with periodic leachate recycling were used for anaerobic composting while three 50 gallon reactors produced an aerobic compost from the same wastes. Reactors were maintained for six months simulating the time between growing seasons. Volatile solids destruction ranged from 10.3 to 38.7%. Biogas production was ranged from 1350 to 1420 1 per k of volatile solids destroyed with a methane content of 55 to 70%. Leachate was monitored throughout for: pH, alkalinity, total and ammonia nitrogen, COD, TOC, total solids, volatile solids and four metals. MPN data was collected for various bacterial groups (total plate count, anaerobic cellulose decomposers, and anaerobic acid producers) to monitor increases and declines in the leachate bacterial population. Physical and chemical testing provided comparisons between finished anaerobic compost and aerobic compost from the same three waste samples.     

Assessing environmental impacts of municipal solid waste of Johor by analytical hierarchy process

The views of the public on solid waste bound to be generated in Johor Bahru Malaysia are presented and appraised. This is because of the massive development currently going on to transform the city to an international standing by the year 2025. For this reason, attempts to raise stakeholder awareness on the need to embrace on how best to manage the current problem with reduced impacts to the environment currently and in the future was attempted. Data were collected through contacts and questionnaire survey. Analytical hierarchy process (AHP) technique was used to structure and assess the views and judgments of stakeholders on the environmental impacts of solid waste disposal. SuperDecision software was used to generate and compute results of stakeholder's judgments. The assessment revealed that fauna and flora, habitat depletion and land use among the criteria are most critical environmental impacts. Landfilling, recycling, incineration and composting were evaluated in terms of the environmental impacts. The choice of incineration is perceived to improve environmental visibility, preserves fauna and flora as well as stream ecology, improves environmental air quality and optimizes land use. Similarly, recycling of waste, is perceived to preserves fauna and flora, stream ecology, habitat depletion, improves air quality as well as land use. Composting is perceived to be the best option in terms of preservation of stream ecology, habitat depletion and land use practice. Landfill generates less noise and vibration but found to be responsible for more than 50% of the environmental impacts created by solid waste in this area. Composting and recycling are mostly preferred to landfilling and incineration and the reason why this is so was provided. The study also identified challenges ahead and highlights that benefits attached to some vital disposal options (such as incineration) are yet to be fully implemented.     

Exploring chemical analysis of vermicompost of various oil palm fibre wastes

The aim of this work was to study the physical and chemical properties of different oil palm wastes, viz. empty fruit bunch (EFB), oil palm frond (OPF) and oil palm trunk (OPT). A study (84 days duration) was conducted to evaluate the efficiency of an exotic earthworm species (epigeic-African Nightcrawler (Eudrilus euginae)) for the decomposition of different types of oil palm wastes (EFB, OPT and OPF) into valuable vermicompost. The decrease in earthworm’s biomass gain for EFB, OPT and OPF may be due to exhaustion of worm feed in vermicomposters. The percentage of nitrogen, phosphorous and potassium in vermicompost was found to increase while pH and total organic carbon declined as a function of the vermicomposting period. The vermicompost obtained showed an increase in heavy metal content for all the reactors, but levels were still in the range of nutrient in the vermicompost. The data reveal that vermicomposting (using African Nightcrawler) is a suitable technology for the decomposition of oil palm wastes, especially EFB into value-added material.     

Economic assessment of flash co-pyrolysis of short rotation coppice and biopolymer waste streams

The disposal problem associated with phytoextraction of farmland polluted with heavy metals by means of willow requires a biomass conversion technique which meets both ecological and economical needs. Combustion and gasification of willow require special and costly flue gas treatment to avoid re-emission of the metals in the atmosphere, whereas flash pyrolysis mainly results in the production of (almost) metal free bio-oil with a relatively high water content. Flash co-pyrolysis of biomass and waste of biopolymers synergistically improves the characteristics of the pyrolysis process: e.g. reduction of the water content of the bio-oil, more bio-oil and less char production and an increase of the HHV of the oil. This research paper investigates the economic consequences of the synergistic effects of flash co-pyrolysis of 1:1 w/w ratio blends of willow and different biopolymer waste streams via cost-benefit analysis and Monte Carlo simulations taking into account uncertainties. In all cases economic opportunities of flash co-pyrolysis of biomass with biopolymer waste are improved compared to flash pyrolysis of pure willow. Of all the biopolymers under investigation, polyhydroxybutyrate (PHB) is the most promising, followed by Eastar, Biopearls, potato starch, polylactic acid (PLA), corn starch and Solanyl in order of decreasing profits. Taking into account uncertainties, flash co-pyrolysis is expected to be cheaper than composting biopolymer waste streams, except for corn starch. If uncertainty increases, composting also becomes more interesting than flash co-pyrolysis for waste of Solanyl. If the investment expenditure is 15% higher in practice than estimated, the preference for flash co-pyrolysis compared to composting biopolymer waste becomes less clear. Only when the system of green current certificates is dismissed, composting clearly is a much cheaper processing technique for disposing of biopolymer waste.     

施入城市生活垃圾堆肥对玉米植株重金属分布及土壤养分的影响

以玉米为供试作物,研究施入生活垃圾堆肥对土壤和玉米各器官重金属分布规律及对土壤养分的影响。结果表明：连续3年施肥,土壤速效养分的含量明显增加;土壤重金属呈现累积,但含量远远低于二级土壤标准（GB 15618—1995）;植株中重金属含量表现为根部〉茎秆〉叶片〉籽粒,Cd在植株根部富集,但未大量向其他部位转移,玉米植株地上部分重金属含量明显低于饲料卫生标准（GB 13078—2001）。由此推断,在短期内（3年）,年施入60 000 kg·hm^-2的垃圾堆肥能提高土壤肥力,且暂时不会引起土壤重金属污染,也不影响玉米植株的饲用;使用多年后应及时监测,以保证安全性。     

Vermicomposting: A sustainable tool for environmental equilibria

Improperly managed organic waste constitutes a serious environment threat across the globe. This has led to a worldwide struggle to strike a balance between the rapid generation of such wastes and protection of the environment. With the unique advantages of lower operational and maintenance costs compared with other waste management technologies, the use of vermicomposting to manage organic wastes has been increasing rapidly in recent years. Still, some factors (e.g., characteristics of substrate composition before and after treatment) are in need of additional, specific studies so that researchers can better understand the metabolism involved in the process. Vermicomposting provides employment opportunities as it protects the environment, augmenting crop productivity when it is used as a fertilizer supplement and helping to maintain ecological balance. Thus, vermicompost plays an important role in the circular economy. This article provides an overview of the research activities that have been conducted on the use of vermicomposts to remove pollutants from the soil, in wastewater treatment, and in organic waste recycling throughout the world. Circular economic assessment has revealed that vermicomposting technology is usually feasible except in certain cases. Most other methods of waste disposal lead to soil deterioration, toxic effects, and increased pollution affecting land, air, water, and living beings, in addition to the sometimes considerable expense of their implementation. Thus, an eco‐friendly method that removes waste in one step is needed. Determining the long‐term performance and sustainable operation of vermicomposting systems still poses a challenge, however, as treatment performance is affected by design parameters, operational conditions, and environmental factors. This article summarizes the factors influencing pollutant removal through the vermicomposting process. Finally, this article highlights additional research that should be conducted on these issues to improve the performance of vermicomposting.