A review of recent substance flow analyses of phosphorus to identify priority management areas at different geographical scales

The dwindling global reserves of extractable phosphorus (P) and its growing demand to produce the required food for a burgeoning global population (the global P crisis) necessitate the sustainable use of this crucial resource. To advert the crisis requires informed policy decisions which can only be obtained by a better understanding of the nature and magnitude of P flow through different systems at different geographical scales. Through a systematic and in-depth review of twenty one recent substance flow analyses of P, we have assessed the key P inflows, outflows, stocks, internal flows, and recycling flows at the city, regional, and country scales. The assessment has revealed, the main inflow and outflow of P at the city scale occurs through food and wastewater respectively, while the main stock of P occurs in landfill. At the regional scale, mineral ore is the main P inflow and chemical P fertilizer is the main outflow particularly in the regions that have P fertilizer production sector. In contrast, either chemical P fertilizer or animal feed is the key inflow and either food and agricultural products or soil losses (erosion, runoff, and/or leaching) is the major outflow especially in the regions without P fertilizer production sector. At the country scale, the key P inflow occurs either through mineral ore or chemical P fertilizer and the key outflow takes place either as food and agricultural products, waste (both solid and liquid), or soil losses (erosion, runoff, and/or leaching). The main stock of P both at the regional and country scales occurs in the soil of the agricultural production sector. As identified in this assessment, the key unproductive outflows and stocks at different geographical scales indicate that there is a potential scope to improve P management through the increased P recovery and recycling, and by the utilization of available soil P stocks. In many of the studies at all the geographical scales, P recycling flow has been found to be less than 20% of the total inflow, and even in some studies at the country scale, P recycling has been found to be entirely absent, which is a clear indication of poor P management. This study has also identified, there is a clear knowledge gap in relation to understanding the P flow over multiple years at the regional scale. The information about the key flows and stocks at different geographical scales as we identified can be utilized to make better P policy and management decisions for a city, region, or country. The information can also be used to guide future research that aims to analyze P flow at the city, regional, and country scales.     

Cost-efficiency in packaging waste management: The case of Belgium

In order to exploit economies of scale Belgian municipalities regularly cooperate in the provision of waste related services. In particular for the collection and separation of household packaging waste, municipalities appear to seek technical and cost efficiency gains by cooperating via municipal waste joint ventures. Although most Belgian municipal waste joint ventures can present excellent recycling and recovery rates for household packaging waste, their performance in terms of cost-efficiency has never been assessed. Using a unique dataset comprising of the costs for all 35 Belgian municipal waste joint ventures in 2010, this paper present the first assessment of the cost efficiency of household packaging waste collection in Belgium. As we are not sure on the relative importance of the separate cost efficiency scores for the three selectively collected household packaging waste fractions when determining the overall cost efficiency, this paper draws on the Benefit-of-the-Doubt approach. Our results indicate that, despite the substantial cooperation between municipalities, still considerable differences in cost efficiency for household packaging waste collection exist.     

高校生活垃圾分类回收及资源化探讨

本文通过对高校生活垃圾组成的调查,探讨了教学区、宿舍区、食堂等区域生活垃圾的分类回收模式,并对废纸、废塑料、废金属、废电池、餐厨垃圾等资源化利用的可行性进行了分析,建议通过加强宣传工作,健全管理机制,完善资源化市场体系等途径对高校生活垃圾进行分类回收及资源化。     

Challenges facing the sustainable consumption and waste management agendas: perspectives on UK households

The management of municipal waste is one of the most emotive local environmental issues in the UK at present and represents a key sustainability “battleground” as local authorities seek to reduce waste arisings and encourage the reuse and recycling of materials among households. Within the literature on household waste management, a broad range of disciplinary perspectives and practical recommendations exist and it is the aim of this paper to step back and take stock of the role of households and communities in resource consumption and waste generation patterns across the UK within recent decades. By exploring the household in this context, trends in consumption and waste generation are outlined in addition to key influencing factors such as lifestyles and well-being, demographics and environment. Finally, key lessons learnt, challenges faced going forward and approaches for developing more sustainable practices at the household, community and national levels are discussed.     

Overview of household solid waste recycling policy status and challenges in Malaysia

With the annual increase in waste generation and heavy reliance on landfilling as disposal, method in Malaysia, it is just a matter of time before significant problems of space limitations, health, and environmental issues hit the nation severely. This paper attempts to develop an overview on solid, waste recycling in Malaysia at the most basic level of a community or nation which is the household, unit. Households are the main primary source of municipal solid waste in Malaysia, consisting of, recyclable materials at most 70% to 80% of the total waste composition as found placed in the, landfills. Overview on the existing household solid waste recycling policy and program status in, Malaysia is relevant in enhancing solid waste management measure from recycling perspective. Despite the high potential and opportunities for solid waste recycling, wastes are still simply being, dumped in an open area of ground without any attempt for recovery and recycling. Comparing to, recycling rates of neighboring countries, Malaysia is falling back at merely 5% which proves how, uncommon recycling practice is. The government is committed to significantly improve the national's, solid waste management services especially in waste minimization. Fortunately the emphasis on, recycling as a sustainable waste management strategy has taken a shift in paradigm as wastes, separation and recycling are part of the major changes in the current policy implementation. With, issues and challenges in recycling practice that were highlighted in this context especially from the, aspects of information availability and other loopholes within solid waste management policies and, related recycling program within the community, the question on whether the goals in 2020 can be, met remains unsure of but there is a possibility for a successful implementation of sustainable solid, waste management particularly in recycling.     

The influence of collection facility attributes on household collection rates of electronic waste: The case of televisions and computer monitors

In the US, household electronic waste collected for recycling is primarily by voluntary drop-off at designated collection facilities. This study examines the influence of specific collection facility attributes (recycling fees charged, number of days open, and driving distance) on the household collection rate of e-waste in the US state of Maine. Data were collected for household computer monitor and television collection for 92 municipal waste transfer facilities representing 30% of the state's population for one year. Results suggest that recycling fees are negatively correlated with the number of televisions and computer monitors collected; furthermore, the more frequently facilities were open, the more televisions and computer monitors were collected per capita. The distance from the facility had no correlation, which prompted an analysis of whether the existence of a curbside collection system in the municipality was influential. Results show a negative correlation between computer monitor and television collection and a municipality having recycling (but not e-waste) curbside collection. Based on the results of this study, policymakers may be able to increase the collection rate of household e-waste by eliminating or lowering recycling fees, expanding collection days and hours to increase convenience, and/or considering curbside collection of e-waste.     

The impact of the European landfill directive on waste management in the United Kingdom

The European Union Landfill Directive calls on member states to reduce the amount of biodegradable municipal solid waste disposed of to landfill. In addition, national waste strategies will require the constituent parts of the United Kingdom to achieve increased household waste recycling and recovery rates. Both these measures will require the development of the infrastructure to support national high-intensity recycling and composting schemes and the construction of at least 35 new municipal waste to energy incinerators. Before plans can be developed for meeting the targets several areas relating to municipal solid waste need to be clarified. Depending on the definition of municipal solid waste, its composition and likely future growth rates the number of incinerators required could be up to 170.     

Municipal solid waste generation in Kathmandu, Nepal

Waste stream characteristics must be understood to tackle waste management problems in Kathmandu Metropolitan City (KMC), Nepal. Three-stage stratified cluster sampling was used to evaluate solid waste data collected from 336 households in KMC. This information was combined with data collected regarding waste from restaurants, hotels, schools and streets. The study found that 497.3 g capita(-1) day(-1) of solid waste was generated from households and 48.5, 113.3 and 26.1 kg facility(-1) day(-1) of waste was generated from restaurants, hotels and schools, respectively. Street litter measured 69.3 metric tons day(-1). The average municipal solid waste generation rate was 523.8 metric tons day(-1) or 0.66 kg capita(-1) day(-1) as compared to the 320 metric tons day(-1) reported by the city. The coefficient of correlation between the number of people and the amount of waste produced was 0.94. Key household waste constituents included 71% organic wastes, 12% plastics, 7.5% paper and paper products, 5% dirt and construction debris and 1% hazardous wastes. Although the waste composition varied depending on the source, the composition analysis of waste from restaurants, hotels, schools and streets showed a high percentage of organic wastes. These numbers suggest a greater potential for recovery of organic wastes via composting and there is an opportunity for recycling. Because there is no previous inquiry of this scale in reporting comprehensive municipal solid waste generation in Nepal, this study can be treated as a baseline for other Nepalese municipalities.     

A comprehensive waste collection cost model applied to post-consumer plastic packaging waste

Post-consumer plastic packaging waste (PPW) can be collected for recycling via source separation or post-separation. In source separation, households separate plastics from other waste before collection, whereas in post-separation waste is separated at a treatment centre after collection. There are also two collection schemes, either curb side or via drop-off locations. These different schemes have impact on total costs of collection at the municipal level. It can also influence the facility choices and network design. Therefore, a method which can compare costs of various collection schemes is needed.A comprehensive cost model was developed to compare costs of municipal collection schemes of PPW. The ‘municipal waste collection cost model’ is based on variables including fixed and variable costs per vehicle, personnel cost, container or bag costs as well as on emission costs (using imaginary carbon taxes). The model can be used for decision support when strategic changes to the collection scheme of municipalities are considered. The model takes into account the characteristics of municipalities, including urbanization degree and taxation schemes for household waste management.The model was applied to the Dutch case of post-consumer plastic packaging waste. Results showed that that in general post-separation collection has the lowest costs and curb side collection in urban municipalities without residual waste collection taxing schemes the highest. These results were supported by the conducted sensitivity analysis, which showed that higher source separation responses are negatively related to curb side collection costs. Greenhouse gas emission costs are a significant part of the total costs when collecting post-consumer plastic packaging waste due to the low density to weight ratio of the materials collect. These costs can amount to 15% of the total collection costs.     

Environmental sustainability assessment of food waste valorization options

Food waste can be valorized through different technologies, such as anaerobic digestion, incineration, and animal feed production. In this study we analyzed the environmental performance of two food waste valorization scenarios from a company of the retail sector in Belgium, through exergy analysis, exergetic life cycle assessment (ELCA), and a traditional life cycle assessment (LCA). In scenario 1 all food waste was considered to be valorized in an anaerobic digestion (producing electricity, heat, digestate and sorting the packaging material to be used as fuel for cement industry), while in scenario 2 a bread fraction was valorized to produce animal feed and a non-bread fraction was valorized in an anaerobic digestion (producing the same products on scenario 1, but in lower amounts). Scenario 2 was 10% more efficient than scenario 1 in the exergy analysis. For the ELCA and the single score LCA, scenario 2 presented lower environmental impacts than scenario 1 (32% and 26% lower, respectively). These results were mainly due to the avoided products from traditional supply chain (animal feed produced from agricultural products) and lower exergy loss at the feed production plant. Nevertheless, the high dry matter content of the bread waste played an important role on these results, therefore it should be pointed out that valorizing food waste to animal feed seems to be a better option only for the fractions of food waste with low water content (as bread waste).     

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO₂ emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3 MtCO₂ annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7 MtCO₂/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO₂ emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.     

河西走廊绿色农业循环模式研究

以绿色农业理念为基础,针对河西走廊绿洲灌区环境资源特点、产业优势及生产中存在的问题,通过对当地玉米、小麦两大主栽作物秸秆饲料化利用、肉牛健康养殖、废弃物综合利用、农畜产品生产全程质量监控等技术的组装配套,研究总结形成种养结合、资源循环利用、清洁生产的绿色农业发展模式,即种养结合型模式＂玉米-牛-沼-肥＂、大田设施配套型模式＂小麦-菇-肥-果（葡萄）＂、小型养殖场型模式＂牛-沼/蚯蚓-肥/饲料＂,并对模式的原理、特点、技术集成要点及效益进行阐述分析。对该3种模式在武威市凉州区谢河镇示范验证,农田节水30%,秸秆养殖利用率达到60%,牛羊良种化率提高30%,奶牛母犊牛生产率达88%,减少化肥施用量20%,减少生活能源支出55%,减少农业废弃物排放75%,提高农业综合效益36%。     

Determining the socially optimal recycling rate

What municipal recycling rate is socially optimal? One credible answer would consider the recycling rate that minimizes the overall social costs of managing municipal waste. Such social costs are comprised of all budgetary costs and revenues associated with operating municipal waste and recycling programs, all costs to recycling households associated with preparing and storing recyclable materials for collection, all external disposal costs associated with waste disposed at landfills or incinerators, and all external benefits associated with the provision of recycled materials that foster environmentally efficient production processes. This paper discusses how to estimate these four components of social cost to then estimate the optimal recycling rate.     

Exploring the relationship between municipal promotion and education investments and recycling rate performance in Ontario,Canada

This study examines the effects of municipal promotion and education (P&E) investments on the recycling rates of recyclables found in Ontario's residential waste stream. Using panel data collected from 223 Ontario municipalities between 2003 and 2012, this study examines whether investments in recycling P&E lead to an increase in household recycling. Investments in recycling promotion and education have been characterized as a policy best practice and is promoted as one of the primary drivers of resource conservation and sustainability in Ontario. Focus is placed on analyzing: (a) the relationship between P&E expenditures and recycling rates in the province, (b) the relationship between municipal recycling rates and P&E investments at different funding levels and (c) the impact of locality on promotion and education efficacy. The results of the statistical regressions indicate that investments in recycling P&E do not increase municipal recycling rates, necessitating a re-evaluation of existing policy and management practices.     

Recycling for small island tourism developments: Food waste composting at Sandals Emerald Bay,Exuma, Bahamas

The ability for small islands to meet sustainability goals is exacerbated by the costs of transporting goods on, and then, wastes off the islands. At small scales, recycling can be prohibitive and complicated by labor costs; the need to profitably recycle and manage solid waste output from tourism is complicated by scale and available technologies. A multi-year study documents the amount of solid waste generated on Great Exuma (Exuma), The Commonwealth of The Bahamas since 2010 with one year of benchmarking, then limited recycling of food waste generation by an all-inclusive resort, Sandals Emerald Bay (SEB). For the island of Exuma, the rapid increase in the rate of accumulation of solid waste associated with a large destination resort has led to an increase in pests such as rats and flies, along with an increased occurrence of fires associated with unburied solid waste. Solid waste has accumulated faster than the island solid waste management can absorb. SEB kitchen and hotel operations contributes an estimated 36% of all solid waste generated on the island, about 1752 t¹ out of a total of 4841 t generated on the island in 2013 (exclusive of vegetation waste). Based on 4 weeks of benchmarking, 48.5% of all the waste coming out of the SEB resort is compostable, organic waste, but waste composition varies widely over time. Exuma Waste Management (EWM) and Recycle Exuma (RE), both privately-held Bahamian businesses, worked for one year (2012–2013) with SEB resort to implement a benchmarking and pilot recycling project to meet Earth Check green resort certification requirements. This paper outlines the costs and resources required for food waste recycling and some barriers to implementing more effective solid waste management for the tourism industry on small islands.     

Integrated Use of GLEAMS and GIS to Prevent Groundwater Pollution Caused by Agricultural Disposal of Animal Waste

/ In modern intensive animal farming the disposal of a large amount of waste is of great concern, as, if not properly performed, it can cause the pollution of water, mainly because of the high content of nitrate and phosphate. This paper presents the results of a study intended to assess the environmental sustainability of animal waste disposal on agricultural soils in the alluvial plain of the River Chiana (Tuscany, Italy), a particularly sensitive area because of the high vulnerability of the shallow aquifer and of the intensive agricultural and breeding activities. With this aim, a strategy has been employed, that consists of the integrated use of a management model and GISs. The consequences on groundwater of applying animal waste to different kind of soils and crop arrangements have been simulated by means of the management model GLEAMS (Groundwater Loading Effects of Agricultural Management Systems, ver 2.01). As the huge amount of data required by such a sophisticated model does not allow applications at a scale larger than the field size, IDRISI and GRASS GIS packages have been used to divide the study area into land units, with homogeneous environmental characteristics, and then to generalize on these units the outputs of the model. The main conclusions can be synthesized as follows: The amount of animal waste produced in some of the investigated areas (i.e., municipal territory) is greater than that disposable on their own agricultural soil with no risks to the groundwater; consequently a cooperative approach among municipalities is necessary in order to plan waste disposal in a comprehensive and centralized way.KEY WORDS: Land use; Animal waste disposal; Groundwater protection; GIS, Management models     

The Austrian P budget as a basis for resource optimization

Phosphorus (P) is a finite and non-substitutable resource that is essential to sustaining high levels of agricultural productivity but is also responsible for environmental problems, e.g., eutrophication. Based on the methodology of Material Flow Analysis, this study attempts to quantify all relevant flows and stocks of phosphorus (P) in Austria, with a special focus on waste and wastewater management. The system is modeled with the software STAN, which considers data uncertainty and applies data reconciliation and error propagation. The main novelty of this work lies in the high level of detail at which flows and stocks have been quantified to achieve a deeper understanding of the system and to provide a sound basis for the evaluation of various management options. The budget confirms on the one hand the dependence of mineral P fertilizer application (2 kg cap⁻¹ yr⁻¹), but it highlights on the other hand considerable unexploited potential for improvement. For example, municipal sewage sludge (0.75 kg cap⁻¹ yr⁻¹) and meat and bone meal (0.65 kg cap⁻¹ yr⁻¹) could potentially substitute 70% of the total applied mineral P fertilizers. However, recycling rates are low for several P flows (e.g., 27% of municipal sewage sludge; 3% of meat and bone meal). Therefore, Austria is building up a remarkable P stock (2.1 kg P cap⁻¹ yr⁻¹), mainly due to accumulation in landfills (1.1 kg P cap⁻¹ yr⁻¹) and agricultural soils (0.48 kg P cap⁻¹ yr⁻¹).     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

Productive utilization of pig farm wastes: a case study for developing countries

This paper presents a case study on pig farm waste management in which pig manure is stabilized in two-stage anaerobic reactors (to produce methane), while pig farm wastewater is treated in water hyacinth ponds from which the harvested water hyacinth plants are used in the production of silage (animal feed) or compost fertilizer. The results suggest the technical feasibility of applying these technologies to treat and recycle pig farm wastes. Cost/benefit analysis reveals the option to produce methane gas and silage to be financially viable after 15 years of operation. A management concept of waste recycling programs is presented, including relationships among objectives, constraints and implementation plan. Decision on a waste recycling program should not be based only on cost/benefit analysis, but also on the pollution control and public health improvement to be gained.