Biodegradation of chemicals in a standardized test and in environmental conditions

The estimation of biodegradation rates is an important source of uncertainty in chemical risk assessment. The existing OECD tests for ready biodegradability have been developed to devise screening methods to determine whether a chemical is potentially easily biodegradable, rather than to predict the actual rate, of biodegradation in the environment. However, risk assessment needs degradation rates. In practice these rates are often estimated (default values) from ready biodegradability tests. These tests have many compromising arbitrary features compared to the situation in the real environment. One important difference is the concentration of the chemical. In wastewater treatment or in the environment many chemicals are present at ng l(-1) to microg l(-1) levels whereas in the tests the concentrations exceed 10-400 mg carbon per litre. These different concentrations of the chemical will lead to different growth kinetics and hence different biodegradation rates. At high concentrations the chemical, if it is degradable, can serve as a primary substrate and competent microorganisms will grow exponentially, resulting in a sigmoid biodegradation curve. At low environmental concentrations the chemical does not serve as a primary substrate, and therefore does not support significant growth of the degraders, and the substrate has a linear biodegradation rate. In this study the biodegradation rates of two reference chemicals, aniline and 4-chloroaniline, were compared in a standard method and in more realistic conditions at low concentrations, using 14C-labelled substances and different sources of inocula. Biomass evolution during the tests was monitored by adenosine triphosphate measurement and also on the basis of the residual 14C-activity in the particulate matter. The results partly support the thesis that low concentrations lead to different biodegradation kinetics compared to the concentrations used in the standard tests. Furthermore the biodegradation rates of the chemicals studied, particularly of 4-chloroaniline, in Finnish natural waters appeared to be lower than those reported in some other countries.     

The use of inert carriers in regulatory biodegradation tests of low density poorly water-soluble substances

Many poorly water-soluble compounds fail regulatory ready biodegradation tests as the method of test material preparation limits the bioavailability of the chemical. The recognised method for delivery of poorly soluble materials into biodegradability tests consists of coating test material inside the test vessel or onto inert substrates (i.e., glass cover slide, boiling beads, filter paper, or Teflon stir bar) that are placed inside the vessels. Volatile solvents are often used to augment this process. Although these substrates work fairly well for delivering many poorly soluble materials into biodegradability tests, they have not been effective in keeping low density, poorly water-soluble substances in the test medium. Soon after medium is added to the test vessels, these chemicals break loose from the substrates and float on the surface where they have limited contact with micro-organisms in the test medium. Hence, there is a reduced potential for measuring substantial biodegradability in the test. This paper describes the work undertaken to establish a standard method of adding low density, poorly water-soluble substances into test vessels of biodegradability studies to ensure these materials remain in contact with micro-organisms in the test medium. The substances are prepared for testing by adsorption onto silica gel followed by dispersion into the culture medium. This method of delivery may provide greater intra- and inter-laboratory consistency in biodegradability test results for low density, poorly water-soluble substances and it may more closely mimic the probable transport and fate of these substances in the environment.     

A new bioseed for determination of wastewater biodegradability: analysis of the experimental procedure

A new bioassay proposed in the patent P201300029 was applied to a pre-treated wastewater containing a mixture of commercial pesticides to simulate a recalcitrant industrial wastewater in order to determine its biodegradability. The test uses a mixture of standardized inoculum of the lyophilized bacteria Pseudomonas putida with the proper proportion of salts and minerals. The results highlight that biodegradation efficiency can be calculated using a gross parameter (chemical oxygen demand (COD)) which facilitates the biodegradability determination for routine water biodegradability analysis. The same trend was observed throughout the assay with the dehydrated and fresh inoculums, and only a difference of 5 % in biodegradation efficiency (E _f) was observed. The obtained results showed that the P. putida biodegradability assay can be used as a commercial test with a lyophilized inoculum in order to monitor the ready biodegradability of an organic pollutant or a WWTP influent. Moreover, a combination of the BOD₅/COD ratio and the P. putida biodegradability test is an attractive alternative in order to evaluate the biodegradability enhancement in water pre-treated with advanced oxidation processes (AOPs).     

Improving ready biodegradability testing of fatty amine derivatives

This study assesses the biodegradation potential of a number of fatty amine derivatives in tests following the OECD guidelines for ready biodegradability. A number of methods are used to reduce toxicity and improve the bioavailability of the fatty amine derivatives in these tests. Alkyl-1,3-diaminopropanes and octadecyltrimethylammonium chloride are toxic to microorganisms at concentrations used in OECD ready biodegradability tests. The concentration of these fatty amine derivatives in the aqueous phase can be reduced by reacting humic, or lignosulphonic acids with the derivatives or through the addition of silica gel to the test bottles. Using these non-biodegradable substances, ready biodegradability test results were obtained with tallow-1,3-diaminopropane and octadecyltrimethylammonium chloride. Demonstration of the ready biodegradability of the water-insoluble dioctadecylamine under the prescribed standard conditions is almost impossible due to the limited bioavailability of this compound. However, ready biodegradability results were achieved by using very low initial test substance concentrations and by introducing an organic phase. The contents of the bottles used to assess the biodegradability of dioctadecylamine were always mixed. False negative biodegradability results obtained with the fatty amine derivatives studied are the result of toxic effects and/or limited bioavailability. The aids investigated therefore improve ready biodegradability testing.     

Testing biodegradability with standardized methods

Laboratory test methods are used by industry laboratories to determine biodegradability, an important parameter for the evaluation of the ecological behaviour of substances. Biodegradability has a key role due to the simple fact that a degradable substance will cause no long term risk in the environment. The great variety of biodegradation processes in the natural environment and in technical plants for treating waste water and solid wastes gave rise to a rather large number of test methods based on different test principles. To guarantee the acceptance of the test results by authorities and customers internationally standardized methods (ISO, OECD) and established quality criteria (GLP, EN 45000, ISO 9000) are used.     

Standard inocula preparations reduce the bacterial diversity and reliability of regulatory biodegradation tests

OECD ready biodegradability tests have been central to understanding the biodegradation of chemicals from a regulatory perspective for many decades. They are not fit for contemporary prioritisation of chemicals based on persistence, however, due to the low concentration of inocula used, short duration and high variability between tests. Two OECD standard inoculum pretreatment methods (settlement and filtration) were investigated to observe their effect on the probability of biodegradation and associated changes in bacterial community structure and diversity of inocula sourced from the activated sludge process of wastewater treatment plants. Both settlement and filtration were shown to dramatically and significantly reduce the probability and increase the variability of biodegradation of 4-nitrophenol compared to the use of unprocessed inocula. These differences were associated with a significant hundred-fold reduction in cell numbers and solids content and a significant shift in bacterial community structure that was sometimes accompanied by significant reductions in detectable operational taxonomic unit richness and evenness. The natural variation (between different environments) and variation due to differential selection of bacterial communities (by different pretreatment methods) is offered as an explanation for the historical high variability in standard OECD ready biodegradability tests.     

Biodegradability testing of synthetic ester lubricants--effects of additives and usage

The optimised biodegradability test system "O2/CO2 Headspace Test with GC-TCD" is used for the assessment of synthetic ester lubricants. The effects of both additives and usage on biodegradability are examined and discussed. Ester based cutting fluids and hydraulic fluids with and without additives are used under defined conditions at machine tools and hydraulic and plain bearing test benches. The lubricants are characterised additionally with respect to kinematic viscosity, acidity and elemental composition. Furthermore, a formulated mineral oil is characterised before and after usage at an hydraulic test bench. The results clearly show that the mineral oil is far less biodegradable than the ester oils and that their biodegradability is not affected by usage. Biodegradability of the ester oils is mainly depending on the characteristics of the base fluids and not affected by the additives. Antioxidants are influencing stability respectively biodegradability indirectly, since they prevent oxopolymerisation effects. Other effects of usage on biodegradation are not detected. In this context, the antioxidants ensure ready biodegradability and have a positive effect on the environmental fate of synthetic ester lubricants.     

Evaluation of the toxicity of substances to be assessed for biodegradability

The ability to distinguish between true non-biodegradability, and inhibition of biodegradability due to the toxic effects of the compound tested present problems. It results in possible false identification of substances as non-biodegradable.Six chemicals were evaluated in a variety of tests to assess their toxicity to aerobic sludge organisms. The tests employed were: BOD₅ and Closed Bottle inhibition tests, inhibition of respiration of activated sludge, growth inhibition of activated sludge, light emission from (MICROTOX test) and the repetitive die-away test (RDA). Results from these tests were compared with results obtained from a number of ready biodegradability tests using the compounds listed above at anticipated non-toxic and toxic concentrations.No test method evaluated consistently forecast toxicity due to the chemicals tested. The MICROTOX and nitrification inhibition tests were too sensitive. A combination of sludge respiration rate and/or growth tests seem most appropriate. To avoid toxicity to the sludge, biodegradability testing should be made at 10% of the EC₅₀ value. Compounds with an EC₅₀ value greater than 300 mg/l are unlikely to be toxic in ready biodegradability tests. Compounds with an EC₅₀ value of less than 20 mg/l may pose problems necessitating the use of the stringent closed bottle test, or the use of C¹⁴ labelled test materials. Compounds with an intermediate EC₅₀ that is between 20–300 mg/l, need to be evaluated at a range of concentrations in biodegradability tests, or may need to be evaluated carefully to define the precise no-effect level. Procedure recommendations to distinguish between the inhibition of biodegradability and inertness of the test substance are made.     

An examination of the physical properties,fate, ecotoxicity and potential environmental risks for a series of propylene glycol ethers

Propylene glycol ethers (PGEs) are comprised of mono-, di- and tri-PGEs and several of their acetate esters. The nature of the range of applications that use PGEs suggests that there is a potential for both intentional and unintentional entry of the materials into the environment. Selected physical/chemical properties, fate characteristics, aquatic toxicity data and calculated environmental concentrations were used to assess potential risks from the manufacture, handling, use, and disposal of PGEs. In general, the PGEs are low to moderately volatile, have high aqueous solubilities, low octanol-water partition coefficients (Kow), and bioconcentration factor values of <10, which indicate they are unlikely to accumulate in aquatic food chains. Both abiotic and biological degradation processes reduce environmental concentrations of PGEs. In air, vapor-phase PGEs react with photo-chemically produced hydroxyl radicals and have half-lives ranging from 5.5 to 34.4 h. A variety of ready and inherent biodegradation test methods, as well as tests that simulate biodegradation in wastewater treatment plants, surface water and soil have been conducted on PGEs. Significant aerobic biodegradation was generally observed, with a range of biodegradation half-lives on the order of 5-25 d. Acute aquatic toxicity studies with PGEs resulted in LC50 values ranging from approximately >100 to >20,000 mg/l for freshwater fish, the pelagic invertebrate Daphnia magna, green algae Selenastrum capricornutum (now called Pseudokirchneriella capricornutum) and bacteria. Level 3 multi-media modeling (EQC model of Mackay) was used to simulate regional-scale concentrations of PGEs in air, soil, water, and sediment. Toxicity thresholds were then compared with regional-scale water, soil and sediment concentrations to determine hazard quotients. Based upon this analysis, concentrations of PGEs are unlikely to pose adverse risks to the environment.     

Biodegradation of US premanufacture notice chemicals in OECD tests

Biodegradation testing of commercial chemicals other than pesticides is generally performed using test guidelines of the Organization for Economic Cooperation and Development (OECD). We used test data submitted with US Premanufacture Notifications (PMNs) received from 1995 through 2005 to study performance of OECD biodegradation tests, as well as the overall testing strategy and guidance. Among the findings are that (1) ready biodegradation (RB) tests gave fairly consistent results relative to the pass/fail outcome, but not necessarily percent degradation; (2) the Zahn-Wellens test worked well in providing a quick measure of sorption potential, but aside from this, provided little useful information for the investigated chemicals beyond what was already available from RB tests; (3) the SCAS test sometimes gives lower % removal than continuous-feed simulation tests like OECD 303A; and (4) OECD 306 (marine biodegradation test) appeared less conservative than ordinary RB tests. Overall, the PMN data lend support to new OECD guidance that endorses the primary role of RB tests, but emphasizes simulation rather than inherent biodegradation tests as the next step.     

生物降解实验中的接种物标准化研究

针对降解实验中接种物采集困难、活性差异大、实验可重复性及结果可比性差的问题展开接种物标准化研究。对多来源的接种物在实验室可控条件下进行驯养,驯养后生长状态良好的活性污泥分别固定于灭菌麸皮和藻酸钙凝胶等2种微生物载体上,形成2种固定化接种物(分别简称为Bran及Ball)。对上述固定化接种物进行微生物活性、适应性、降解能力以及稳定性研究:通过2种固定化接种物与商品化接种物Polyseed对葡萄糖-谷氨酸(GGA)五日生化需氧量(BOD5)的结果与活菌细胞数的关系,确认3种接种物在降解实验中的用量可控制在相同数量级;比较不同批次及保存时间的2种固定化接种物、相同批次不同保存时间的Polyseed以及污水处理厂曝气池污泥为接种物对苯胺及二甘醇的快速生物降解实验(OECD301F)结果,发现Ball及Bran较Polyseed及新鲜采集活性污泥的微生物适应性及降解能力更佳。此外,在较长保存期内2种固定化接种物活性相对稳定。2种固定化接种物初具成为标准化接种物的必要条件。     

A method for measuring the anoxic biodegradability under denitrifying conditions

A test for assessing the anoxic biodegradability of organic compounds under denitrifying conditions is proposed. The method is based on the recovery and quantification of the CO2 produced, which is evidence of complete biodegradation of the test compound (added as the sole carbon source). The tests were carried out in a mineral medium, with nitrate as electron acceptor. Whole lake sediments, sediment extracts and a commercial inoculum were assayed as a possible inoculum source by means of glucose biodegradability tests. It was found that the sediment extracts constitute a suitable and environmentally-relevant inoculum source, since they add non-significant amounts of carbon to the tests. Two xenobiotic compounds, namely, aniline and phenol, were tested in the aforementioned conditions as well as in a standard aerobic biodegradability test. Both aniline and phenol attained a biodegradation level higher than 60% in a short time period (<28 days) and thus can be considered as readily biodegradable in denitrifying environments. Nevertheless, the kinetics obtained in the anoxic test were slower than in aerobic conditions, and even suggested the accumulation of intermediate metabolites in the case of phenol. The results of this study indicate that the fate of xenobiotic compounds under anoxic conditions differs from that observed in an oxic environment, and therefore it should be considered by standard biodegradability testing procedures.     

Biodegradation of polylactide in aerobic and anaerobic thermophilic conditions

Biodegradable polymers are designed to resist a number of environmental factors during use, but to be biodegradable under disposal conditions. The biodegradation of polylactide (PLLA) was studied at different elevated temperatures in both aerobic and anaerobic, aquatic and solid state conditions. In the aerobic aquatic headspace test the mineralisation of PLLA was very slow at room temperature, but faster under thermophilic conditions. The clear effect of temperature on the biodegradability of PLLA in the aquatic tests indicates that its polymer structure has to be hydrolysed before microorganisms can utilise it as a nutrient source. At similar elevated temperatures, the biodegradation of PLLA was much faster in anaerobic solid state conditions than in aerobic aquatic conditions. The behaviour of PLLA in the natural composting process was similar to that in the aquatic biodegradation tests, biodegradation starting only after the beginning of the thermophilic phase. These results indicate that PLLA can be considered as a compostable material, being stable during use at mesophilic temperatures, but degrading rapidly during waste disposal in compost or anaerobic treatment facilities.     

Ecotoxicity of biocomposites based on renewable feedstock - preliminary studies

The aim of the work was to study the biodegradation process of biocomposites prepared from renewable resources and the ecotoxicological assessment of their biodegradation products. Biocomposites from modified starch reinforced with various cellulose fibers were prepared by the extrusion process. Biodegradation studies were carried out according to the ISO respirometic method. Ecotoxicity of biodegradation products was assessed by the luminescent bacteria test. It was found that biodegradation of biocomposites was above 60% within 24 days according to the results of respirometric test. Increase in the amount of natural fiber reinforcement, as well as smaller fiber size increased the biodegradability of biocomposites. On the basis of the preliminary results of the ecotoxicological test using luminescent bacteria it seems that the biodegradation products of the biocomposites studied are ecologically safe.     

High throughput and miniaturised systems for biodegradability assessments

The society demands safer products with a better ecological profile. Regulatory criteria have been developed to prevent risks for human health and the environment, for example, within the framework of the European regulation REACH (Regulation (EC) No 1907, 2006). This has driven industry to consider the development of high throughput screening methodologies for assessing chemical biodegradability. These new screening methodologies must be scalable for miniaturisation, reproducible and as reliable as existing procedures for enhanced biodegradability assessment. Here, we evaluate two alternative systems that can be scaled for high throughput screening and conveniently miniaturised to limit costs in comparison with traditional testing. These systems are based on two dyes as follows: an invasive fluorescent dyes that serves as a cellular activity marker (a resazurin-like dye reagent) and a noninvasive fluorescent oxygen optosensor dye (an optical sensor). The advantages and limitations of these platforms for biodegradability assessment are presented. Our results confirm the feasibility of these systems for evaluating and screening chemicals for ready biodegradability. The optosensor is a miniaturised version of a component already used in traditional ready biodegradability testing, whereas the resazurin dye offers an interesting new screening mechanism for chemical concentrations greater than 10 mg/l that are not amenable to traditional closed bottle tests. The use of these approaches allows generalisation of high throughput screening methodologies to meet the need of developing new compounds with a favourable ecological profile and also assessment for regulatory purpose.     

Biodegradability of organic nanoparticles in the aqueous environment

Synthetic nanoparticles have already been detected in the aquatic environment. Therefore, knowledge on their biodegradability is of utmost importance for risk assessment but such information is currently not available. Therefore, the biodegradability of fullerenes, single, double, multi-walled as well as COOH functionalized carbon nanotubes and cellulose and starch nanocrystals in aqueous environment has been investigated according to OECD standards. The biodegradability of starch and cellulose nanoparticles was also compared with the biodegradability of their macroscopic counterparts. Fullerenes and all carbon nanotubes did not biodegrade at all, while starch and cellulose nanoparticles biodegrade to similar levels as their macroscopic counterparts. However, neither comfortably met the criterion for ready biodegradability (60% after 28 days). The cellulose and starch nanoparticles were also found to degrade faster than their macroscopic counterparts due to their higher surface area. These findings are the first report of biodegradability of organic nanoparticles in the aquatic environment, an important accumulation environment for manmade compounds.     

Evaluation of laboratory-made sludge for an anaerobic biodegradability test and its use for assessment of 13 chemicals

Laboratory-made sludge for a biogas based anaerobic biodegradability test was prepared as an alternative for digested sludge from wastewater treatment plants (WWTPs). Biodegradation activities and background gas productions of digested sludge from various WWTPs were found to vary significantly depending on the source, which adversely affected test reliability. Subsequently, test conditions such as sludge concentration and sludge washing were examined with the laboratory-made sludge and a sludge concentration of 1.0 g-SS/L without washing was determined to be most suitable. Under these conditions, biodegradability tests were conducted for 13 select chemicals and their relative toxicities to methanogenic bacteria were evaluated. The results of biodegradability tests showed that chemicals with -OH and -CH2OH radicals were readily biodegraded and those with -Cl, -NO2, -NH2, -SO3H and -CH3 had inhibited degradation responses m-nitriphenol and 2,4,6-trichlorophenol were highly toxic to methanogenic bacteria, with m-nitrophenol completely inhibiting methane fermentation as low as 20 mg/L.     

Primary biodegradation of veterinary antibiotics in aerobic and anaerobic surface water simulation systems

The primary aerobic and anaerobic biodegradability at intermediate concentrations (50-5000 microg/l) of the antibiotics olaquindox (OLA), metronidazole (MET), tylosin (TYL) and oxytetracycline (OTC) was studied in a simple shake flask system simulating the conditions in surface waters. The purpose of the study was to provide rate data for primary biodegradation in the scenario where antibiotics pollute surface waters as a result of run-off from arable land. The source of antibiotics may be application of manure as fertilizer or excreta of grazing animals. Assuming first-order degradation kinetics, ranges of half-lives for aerobic degradation of the four antibiotics studied were 4-8 days (OLA), 9.5-40 days (TYL), 14-104 days (MET) and 42-46 days (OTC). OLA and OTC were degraded with no initial lag phase whereas lag phases from 2 to 34 days (MET) and 31 to 40 days (TYL) were observed for other substances. The biodegradation behaviour was influenced by neither the concentrations of antibiotics nor the time of the year and location for sampling of surface water. Addition of 1 g/l of sediment or 3 mg/l of activated sludge from wastewater treatment increased the biodegradation potential which is believed to be the result of increased bacterial concentration in the test solution. Biodegradation was significantly slower in tests conducted in absence of oxygen. Assessments of the toxic properties of antibiotics by studying the influence on the biodegradation rates of 14C-aniline at different concentrations of antibiotics showed that no tests were conducted at toxic concentrations.     

4种脂肪酸浮选捕收剂的生物降解性能研究

在好氧的条件下,以活性污泥为接种体,使用改良斯特姆法测试脂肪酸浮选捕收剂(油酸钠、9-羟基硬脂酸钠、硬脂酸钠、蓖麻油酸钠)的生物降解性能,并与利用BOD5/COD进行的可生化评价方法进行比较。结果表明:(1)油酸钠、蓖麻油酸钠的BOD5/COD分别为0.54、0.63,属易生物降解物质;9-羟基硬脂酸钠、硬脂酸钠的BOD5/COD分别为0.36、0.37,属可生物降解物质。(2)油酸钠、9-羟基硬脂酸钠、蓖麻油酸钠28d的生物降解率分别为88.6%、62.2%、100.0%,达到了经济合作与发展组织的OECD-301B生物降解性能实验标准,属于易生物降解物质;硬脂酸钠28d的生物降解率为49.8%,没有达到OECD-301B生物降解性能实验标准,属难生物降解物质。4种脂肪酸浮选捕收剂的生物降解性能依次为:蓖麻油酸钠油酸钠9-羟基硬脂酸钠硬脂酸钠。(3)当有机酸中存在碳碳双键和羟基时,有机酸的生物降解性能都会提高,并且碳碳双键的影响要大于羟基的影响;当二者同时存在时,生物降解性能会大幅度提高。