Multiple system modelling of waste management

Due to increased environmental awareness, planning and performance of waste management has become more and more complex. Therefore waste management has early been subject to different types of modelling. Another field with long experience of modelling and systems perspective is energy systems. The two modelling traditions have developed side by side, but so far there are very few attempts to combine them. Waste management systems can be linked together with energy systems through incineration plants. The models for waste management can be modelled on a quite detailed level whereas surrounding systems are modelled in a more simplistic way. This is a problem, as previous studies have shown that assumptions on the surrounding system often tend to be important for the conclusions. In this paper it is shown how two models, one for the district heating system (MARTES) and another one for the waste management system (ORWARE), can be linked together. The strengths and weaknesses with model linking are discussed when compared to simplistic assumptions on effects in the energy and waste management systems. It is concluded that the linking of models will provide a more complete, correct and credible picture of the consequences of different simultaneous changes in the systems. The linking procedure is easy to perform and also leads to activation of project partners. However, the simulation procedure is a bit more complicated and calls for the ability to run both models.     

Electronic waste management approaches: An overview

Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.     

Life cycle assessment of ship-generated waste management of Luka Koper

Sea ports and the related maritime activities (e.g. shipping, shipbuilding, etc.) are one of the main driver of Europe’s growth, jobs, competitiveness and prosperity. The continuously growth of shipping sectors has however introduced some environmental concerns, particularly with respect to ship-generated waste management. The port of Koper, one of the major ports on the northern Adriatic Coast, is the focus of this study. In this paper, a life cycle assessment was performed to identify and quantify the environmental impacts caused by the ship-generated waste management of port of Koper. Carcinogens substance (e.g. dioxins) and inorganic emissions, especially heavy metals, resulted to be the most critical environmental issues, while the fossil fuels consumption is reduced by recovery of ship-generated oils. Moreover, the final treatment of ship waste was found to be critical phase of the management, and the landfill have a significant contribute to the overall environmental load. These results can be useful in the identification of the best practices and in the implementation of waste management plans in ports.     

Preliminary study for the management of construction and demolition waste

This paper refers to the management of the construction and demolition (C&D) waste since, according to the EU Waste Strategy, C&D waste is considered to be one of the priority waste streams and appropriate actions need to be taken with respect to its effective management. Initially, the paper presents the state-of-the-art of the problem of C&D waste, including the amount and composition of C&D waste in EU countries, differences in the characteristics of this waste stream depending on its origin, as well as collection and management practices that are applied. A methodology is described for the estimation of the quantities of the waste stream under examination, since in most cases quantitative primary data is not available. Next, the fundamentals for the development of an integrated scheme for the management of C&D waste are presented and discussed, such as appropriate demolition procedures and location of waste management (off-site waste management, on-site waste management, direct on-site recovery, centralized on-site recovery). Finally, taking into consideration all relevant parameters, alternative systems that could be applied for the management of the C&D waste are suggested.     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Municipal solid waste management in Indian cities - A review

Municipal solid waste management (MSWM) is one of the major environmental problems of Indian cities. Improper management of municipal solid waste (MSW) causes hazards to inhabitants. Various studies reveal that about 90% of MSW is disposed of unscientifically in open dumps and landfills, creating problems to public health and the environment. In the present study, an attempt has been made to provide a comprehensive review of the characteristics, generation, collection and transportation, disposal and treatment technologies of MSW practiced in India. The study pertaining to MSWM for Indian cities has been carried out to evaluate the current status and identify the major problems. Various adopted treatment technologies for MSW are critically reviewed, along with their advantages and limitations. The study is concluded with a few fruitful suggestions, which may be beneficial to encourage the competent authorities/researchers to work towards further improvement of the present system.     

The use of chemical composition data in waste management planning--a case study

As the waste industry continues to move from a disposal-based system to one based on a combination of recovery options, the need for information on the composition of waste increases and this is reflected by the amount of information on the physical composition of municipal solid wastes that is now available. However, there is far less information on the chemical composition of municipal solid waste. The results from a number of chemical surveys from Europe are compared and show a reasonable degree of agreement, but several problems were identified with the data. Chemical and physical compositional data are combined in a case study example to investigate the flow of key potential pollutants in an integrated solid waste management system that uses materials recycling, composting, incineration and landfilling. This case study has shown that an integrated waste management strategy diverts lead and cadmium away from composting and recycling to incineration, which effectively isolates these elements from the environment through efficient capture of the pollutants followed by secure landfilling or recycling of the residues. However, further work is needed to determine the distribution of mercury in incineration residues and its fate when the residues are landfilled.     

The practice and challenges of solid waste management in Singapore

This paper presents an overview of the current solid waste management situation in Singapore and provides a brief discussion of the future challenges. Singapore is a small island city-state with a large population, warm climate and high humidity. Over the past two to three decades, rapid industrialization and economic development have caused a tremendous increase in solid waste generation. The yearly disposed solid waste increased from 0.74 million tonnes in 1972 to 2.80 million tonnes in 2000. Solid waste management in Singapore has traditionally been undertaken by the Ministry of Environment (ENV), with the participation of some private sectors in recent years. The hierarchy of solid waste management in Singapore is waste minimization (reduce, reuse and recycle or so-called 3 Rs), followed by incineration and landfill. As land is extremely scarce and only one newly constructed offshore landfill site is available, solid waste incineration has been identified as the most preferred disposal method. Waste minimization, the utilization of incineration ashes, industrial waste management are regarded to be the major challenges in the future.     

Simultaneous personnel and vehicle shift scheduling in the waste management sector

Urban waste management is becoming an increasingly complex task, absorbing a huge amount of resources, and having a major environmental impact. The design of a waste management system consists in various activities, and one of these is related to the definition of shift schedules for both personnel and vehicles. This activity has a great incidence on the tactical and operational cost for companies. In this paper, we propose an integer programming model to find an optimal solution to the integrated problem. The aim is to determine optimal schedules at minimum cost. Moreover, we design a fast and effective heuristic to face large-size problems. Both approaches are tested on data from a real-world case in Southern Italy and compared to the current practice utilized by the company managing the service, showing that simultaneously solving these problems can lead to significant monetary savings.     

Investigation of health care waste management in Binzhou District,China

In China, national regulations and standards for health care waste management were implemented in 2003. To investigate the current status of health care waste management at different levels of health care facilities (HCF) after the implementation of these regulations, one tertiary hospital, one secondary hospital, and four primary health care centers from Binzhou District were visited and 145 medical staff members and 24 cleaning personnel were interviewed.Generated medical waste totaled 1.22, 0.77, and 1.17 kg/bed/day in tertiary, secondary, and primary HCF, respectively. The amount of medical waste generated in primary health care centers was much higher than that in secondary hospitals, which may be attributed to general waste being mixed with medical waste. This study found that the level of the HCF, responsibility for medical waste management in departments and wards, educational background and training experience can be factors that determine medical staff members’ knowledge of health care waste management policy. Regular training programs and sufficient provision of protective measures are urgently needed to improve occupational safety for cleaning personnel. Financing and administrative monitoring by local authorities is needed to improve handling practices and the implementation of off-site centralized disposal in primary health care centers.     

Waste management models and their application to sustainable waste management

The purpose of this paper is to review the types of models that are currently being used in the area of municipal waste management and to highlight some major shortcomings of these models. Most of the municipal waste models identified in the literature are decision support models and for the purposes of this research, are divided into three categories-those based on cost benefit analysis, those based on life cycle assessment and those based on multicriteria decision making. Shortcomings of current waste management models include that they are concerned with refinements of the evaluation steps (e.g. stage four of AHP or the improvement of weight allocations in ELECTRE) rather than addressing the decision making process itself. In addition, while many models recognise that for a waste management model to be sustainable, it must consider environmental, economic and social aspects, no model examined considered all three aspects together in the application of the model.     

Multi-criteria analysis for the determination of the best WEEE management scenario in Cyprus

Waste from electrical and electronic equipment (WEEE) constitutes one of the most complicated solid waste streams in terms of its composition, and, as a result, it is difficult to be effectively managed. In view of the environmental problems derived from WEEE management, many countries have established national legislation to improve the reuse, recycling and other forms of recovery of this waste stream so as to apply suitable management schemes. In this work, alternative systems are examined for the WEEE management in Cyprus. These systems are evaluated by developing and applying the Multi-Criteria Decision Making (MCDM) method PROMETHEE. In particular, through this MCDM method, 12 alternative management systems were compared and ranked according to their performance and efficiency. The obtained results show that the management schemes/systems based on partial disassembly are the most suitable for implementation in Cyprus. More specifically, the optimum scenario/system that can be implemented in Cyprus is that of partial disassembly and forwarding of recyclable materials to the native existing market and disposal of the residues at landfill sites.     

Cost estimation for solid waste management in industrialising regions--precedents, problems and prospects

The importance of cost planning for solid waste management (SWM) in industrialising regions (IR) is not well recognised. The approaches used to estimate costs of SWM can broadly be classified into three categories - the unit cost method, benchmarking techniques and developing cost models using sub-approaches such as cost and production function analysis. These methods have been developed into computer programmes with varying functionality and utility. IR mostly use the unit cost and benchmarking approach to estimate their SWM costs. The models for cost estimation, on the other hand, are used at times in industrialised countries, but not in IR. Taken together, these approaches could be viewed as precedents that can be modified appropriately to suit waste management systems in IR. The main challenges (or problems) one might face while attempting to do so are a lack of cost data, and a lack of quality for what data do exist. There are practical benefits to planners in IR where solid waste problems are critical and budgets are limited.     

The German packaging ordinance: the questionable effects of a fragmentary solid waste management approach

Germany seems to be one of the leading nations in solid waste management, especially in the case of packaging waste; success stories about the ongoing increase in recycling strengthen this impression. However, enormous costs and questionable ecological benefits are the result of Germany's packaging ordinance and the formation of the recycling organization Duales System Deutschland (DSD). This article shows that similar progress in the reduction and recycling of packaging could have been realized without the packaging ordinance and dual system, with lower costs. This regulatory impact analysis of the German packaging ordinance covers all the effects on the different life-cycle stages of packaging, from production to recycling or disposal. The conclusion is that a fragmentary solid waste management approach – one that is based, like the German packaging ordinance, more on ideology than on facts – leads to enormous costs and questionable ecological benefits. To improve this situation, there is a need for an integrated solid waste management approach, based on evaluation of the economic, environmental, and social effects of different waste management options for the materials involved. Received: February 4, 1999 / Accepted: April 30, 1999     

Mad cow and related diseases: Challenges for waste management

Mad cow disease and related transmissible spongiform encephalopathy diseases (TSEs) in both animals and humans have received worldwide attention. Interestingly, the issue of managing biohazardous wastes, for which TSE agents are an issue, has received little attention by environmental professionals. The burial of wastes associated with mad cow and related diseases may eventually lead to unusual challenges for remediation professionals. The core challenge is that medical researchers have confirmed the incredible difficulty in destroying TSE infectious agents or pathogens, generally called prions. Risk reduction is certainly possible with treatment technologies, but complete elimination of risk by reliable and verifiable destruction of all TSE agents is probably infeasible. Proving the efficacy of any waste treatment method for TSE-infected wastes is not practical because there is no commercially available test for TSE pathogens (although one is expected soon) and in only a few cases is there a reasonable surrogate approach. These circumstances have contributed to some biohazardous waste managers discounting the TSE issue. The goal of this article is to more thoroughly analyze available information and various risks to identify useful implications for alternative waste management technologies. A number of prudent actions can be taken in recognition of the TSE problem, including more careful assessment of treatment technologies, avoiding any reuse or recycling of waste treatment residues, using air pollution control systems to avoid releases of materials possibly containing infectious agents, and using wastewater pretreatment prior to sewer disposal.     

Fire in waste-fuel stores: risk management and estimation of real cost

The purpose of this study was to improve risk management and to investigate build-up of the costs of fire in waste-fuel stores, to make the authorities and the population in general aware of the substantial monetary and non-material benefits connected with preventive measures being taken. To summarize, the results from the case studies show that the fires occurred by self-ignition of organic materials, the storage facilities were badly and/or not properly designed, and the waste fuels were not handled properly. On the basis of two case studies the main finding was that there must be one person only in charge during the fire to lead the action, and the fire brigade must not leave the area too early. Nowadays, the real cost for the fire is not calculated properly, or at all, by the waste-management company. It is concluded that waste-management companies, society, and insurance companies could save money by implementation of precautionary measures. Such relevant measures are reviewed. It is recommended: not to store waste fuels too high, in volumes which are too large or too close to town districts; to promote better cooperation between waste companies and the fire brigades and the local EPA; and to make insurance companies demand implementation of more security measures before signing the insurance contracts.     

A new paradigm for waste management

The concept ‘waste' was assessed, and redefined as ‘an emerged quality of a substance'. A substance or object is qualified a waste when it is not used to its full potential'. Under this paradigm, any process can be used for the transformation of waste to remove this quality label, and the necessity of a systemic approach to the resource and waste management becomes obvious. Any substance, labelled waste or resource, is part of at least one material cycle. Material cycle modelling provides a convenient method of abstraction to present the system alternatives to decision-makers and emphasises the interdependence between the availability and fate of all atomic elements in primary production and waste management. The rearrangement and closing of material cycles, for example, opens the way to eliminate landfills of harmful residues and contributes to the conservation of resources. While the adoption of the new paradigm may lead to dramatic technological development, the consideration, appreciation and adoption of such integrated resource and waste systems by decision-makers must be adequately supported by the apt supply of accessible information on system structure, technology options and effects. To determine the scope of the decision support tool, four images of 2030's waste infrastructure were constructed. Public awareness and attitude were identified as the main parameters that determine the future context, apart from technological development, resource scarcity and final abatement of waste processing residues.     

Changing scenario of municipal solid waste management in Kanpur city,India

Journal of Material Cycles and Waste Management - Generation of municipal solid waste (MSW) depends upon lifestyle, urbanization and income level of population. Solid waste management is one of the...     

A novel sustainable decision making model for municipal solid waste management

This paper reviews several models developed to support decision making in municipal solid waste management (MSWM). The concepts underlying sustainable MSWM models can be divided into two categories: one incorporates social factors into decision making methods, and the other includes public participation in the decision-making process. The public is only apprised or takes part in discussion, and has little effect on decision making in most research efforts. Few studies have considered public participation in the decision-making process, and the methods have sought to strike a compromise between concerned criteria, not between stakeholders. However, the source of the conflict arises from the stakeholders' complex web of value. Such conflict affects the feasibility of implementing any decision. The purpose of this study is to develop a sustainable decision making model for MSWM to overcome these shortcomings. The proposed model combines multicriteria decision making (MCDM) and a consensus analysis model (CAM). The CAM is built up to aid in decision-making when MCDM methods are utilized and, subsequently, a novel sustainable decision making model for MSWM is developed. The main feature of CAM is the assessment of the degree of consensus between stakeholders for particular alternatives. A case study for food waste management in Taiwan is presented to demonstrate the practicality of this model.     

Re-thinking incentives and penalties: Economic aspects of waste management in Italy

This paper focuses on the dynamics the formation of operational costs of waste management in Italy and the effect of economic measures. Currently incentives and penalties have been internalized by the system no differently from other cost items and revenues. This has greatly influenced the system directing it towards solutions that are often distant from the real environmental objectives. Based on an analysis of disaggregated costs of collection treatment and recovery, we provide the basic elements to compose a picture of economic management in various technical–organizational scenarios.In the light of the considerations contained in the paper it is proposed, e.g. for controlled landfills, that the ecotax, currently based on weight, could be replaced by one based on the volume consumption. Likewise, for tax reduction on disposal system, instead a pre-treatment might ask an environmental balance of the overall system.The article presents a reflection on the last hidden costs associated with the consumption of goods and packaging, and how to reduce waste production is the necessary path to be followed in ecological and economic perspectives.