Efficient regional ozone control strategies for the eastern United States

When environmental regulatory bodies formulate control plans, it is incumbent upon them to try to achieve the stated goals in an economically efficient manner. The US Environmental Protection Agency (EPA) is presently developing regulations to limit the influence of transported ozone on areas that are having difficulty meeting the ambient air quality standard. EPA has proposed stringent control measures for emissions of nitrogen oxides (NOx) in 22 states of the eastern US. The strategy would necessitate the use of selective catalytic reduction or similar high-performance technology on almost all major power plants in the region, as well as extensive controls on industrial sources. This paper suggests several alternative approaches that would achieve equal or better environmental improvement at lower cost. These include focusing control efforts on sources closer to the North-east Corridor, pushing controls on close-in sources to a higher level of technology performance, and relaxing the stringency of requirements for states remote from ozone problem areas. All the approaches examined are two to three times more cost-effective than EPA's proposed approach in the North-east Corridor.     

Reducing anthropogenic environmental stresses: A review on cleaner production and industrial ecology

Cleaner production (CP) provides source control measures of minimizing the waste and emissions occurred by the production and processes. CP, which is also known by the term pollution prevention (P2), has been practiced for several years among various countries across the world. Practicing of CP in industries supports in optimization of materials utilization, lowering the energy consumption, and the reduction of emissions to air, water, and soil. CP provides a continuous and preventive environmental improvement for the organizations by focusing on the prevention rather than providing solutions, once the pollution has been occurred. Implementing CP in a business requires support from the employees from top to bottom levels in the hierarchy, to obtain a successful and long‐term outcome. Thus, CP is no longer considered as a standalone process and should be integrated in the entire business development activities, in order to improve the quality of life. CP can also be identified as a subset of industrial ecology, which focuses on designing the industrial processes, products, and services, in order to minimize the environmental concerns of the industrial activities. This article will provide an overview of the background of CP, the CP assessment methodology, and the concepts of industrial ecology.     

Control strategies for vehicular NOx emissions in Guangzhou, China

Guangzhou is a city in southern China that has experienced very rapid economic development in recent years. The city's air has very high concentrations of various pollutants, including sulphur dioxide (SO₂), oxides of nitrogen (NOx), ozone (O₃) and particulate. This paper reviews the changes in air quality in the city over the past 15 years, and notes that a serious vehicular-related emissions problem has been superimposed on the traditional coal-burning problem evident in most Chinese cities. As NOx concentrations have increased, oxidants and photochemical smog now interact with the traditional SO₂ and particulate pollutants, leading to increased health risks and other environmental concerns.
Any responsible NOx control strategy for the city must include vehicle emission control measures. This paper reviews control strategies designed to abate vehicle emissions to fulfill the city's air quality improvement target in 2010. A cost-effectiveness analysis suggests that, while NOx emission control is expensive, vehicular emission standards could achieve a relatively sizable emissions reduction at reasonable cost. To achieve the 2010 air quality target of NOx, advanced implementation of EURO3 standards is recommended, substituting for the EURO2 currently envisioned in the national regulations. Related technical options, including fuel quality improvements and inspection/maintenance (I/M) upgrades (ASM or IM240), are assessed as well.     

Regulation for environmental protection: The Nanticoke industrial complex,Ontario, Canada

This assessment of the environmental protection regulatory system for the $2.2 billion iron and steel plant, oil refinery, and thermal generating station composing the core of the greenfield Nanticoke industrial complex is based upon: the use of governmental and industrial research in project management; technology and institutional arrangements for environmental protection; evidence of environmental changes to date; analysis of government and industrial approval files; and interviews with government, industry, and interest group representatives. Planning, regulation, and management have been reasonably efficient and effective to the beginning of the operational stage for all three major industries as of spring 1980. Of major future concern, however, is management of the cumulative and synergistic impacts of the industries and associated development on air quality as well as the lands, waters, and sensitive ecosystems of the nearby Lake Erie coast. Continuous monitoring, more comprehensive research, and better overall coordination of government, industrial, and public interests are required if Nanticoke benefits are to be achieved without undue cost to pre-project resource users within and outside the Haldimand-Norfolk region.     

Integrating industrial ecology principles into a set of environmental sustainability indicators for technology assessment

This paper focuses on the environmental component of sustainability of technology, taking into account the role of industrial ecology. Assessment of environmental sustainability of technology traditionally focuses on immediate impact of technology on the environment through quantifying resource extraction and generated emissions. However, technology does not only exchange materials with the environment but also with the industrial society as a whole, the so-called industrial metabolism. A higher compatibility of a specific technology with the industrial system, as studied in industrial ecology, can result in lower resource extraction and reduced waste emission, indirectly contributing to a better environmental sustainability.Starting from the considerations above and based on the second law of thermodynamics, the paper presents a set of five environmental sustainability indicators for the assessment of products and production pathways, integrating industrial ecology principles. The indicators, all scaled between 0 and 1, take into account: (1) renewability of resources; (2) toxicity of emissions; (3) input of used materials; (4) recoverability of products at the end of their use; (5) process efficiency.The applicability of the elaborated set of indicators is illustrated for different production pathways of alcohols (petrochemical and oleochemical based), polyethylene end-of-life options and electricity production from non-renewable (natural gas and fossil oil) and renewable resources (hydropower, photovoltaic conversion of solar irradiation).     

Energy sub-modules applied in life-cycle inventory of processes

The heating and cooling of unit processes (utilities) are often the most significant energy fraction of a gate-to-gate life-cycle inventory (LCI) for individual chemicals. Electricity usage is typically a smaller factor. An LCI of a manufacturing process for a specific chemical has been used to identify the heating and cooling requirements. This paper demonstrates the sub-modules used to convert these utilities into actual energy-related emissions for use in the LCI of a specific chemical. Assumptions and results of the unit operation inventory data and of the potential life-cycle burdens are clearly stated, to foster the objective of transparency. A user may substitute another energy grid, fuel sources, or efficiencies based on some site-specific data. The sub-modules utilize a design basis for calculating the utility emissions. Results may be used in LCI studies in the chemical, biochemical, and pharmaceutical industries.     

基于LMDI模型的乌鲁木齐工业废气排放影响因素研究

本文运用对数平均的LMDI 分解模型,选取工业SO₂、工业烟(粉)尘排放量作为污染物指标,将2006—2013 年,乌鲁木齐工业废气排放量影响因素分解为规模效应、结构效应、技术效应,考虑到技术效应机制的复杂性,进一步将技术效应细化为污染治理效应和清洁技术效应。研究结果表明:规模效应和结构效应增加乌鲁木齐工业废气排放,其中规模效应对工业废气排放量贡献率由2007 年的119.10%增加到2013 年的263.03%,结构效应对工业废气排放量的增加也起到一定的促进作用,但影响效果远低于规模效应,年贡献率均低于10%,技术效应阻碍工业废气排放的增加,贡献率由2007 年的-19.86%增加到2013 年的-172.50%。制造业和电力、燃气及水的生产和供应业废气排放量占工业废气排放总量的70% 左右,是乌鲁木齐工业废气污染的主要行业。清洁技术效应对SO₂ 的减排起促进作用,是阻碍工业SO₂ 排放量增加的主要因素。污染治理效应是工业烟(粉)尘的减排主要因素,说明目前乌鲁木齐工业烟(粉)尘的减排依赖于排放后的治理。     

Climate change policies and capital vintage effects: the cases of US pulp and paper, iron and steel, and ethylene

Changes in material use, energy use and emissions profiles of industry are the result of complex interrelationships among a multitude of technological and economic drivers. To better understand and guide such changes requires that attention is paid to the time-varying consequences that technology and economic influences have on an industry's choice of inputs and its associated (desired and undesired) outputs. This paper lays out an approach to improving our understanding of the dynamics of large industrial systems. The approach combines engineering and econometric analysis with a detailed representation of an industry's capital stock structure. A transparent dynamic computer modeling approach is chosen to integrate information from these analyses in ways that foster participation of stakeholders from industry and government agencies in all stages of the modeling process-from problem definition and determination of system boundaries to generation of scenarios and interpretation of results. Three case studies of industrial energy use in the USA are presented-one each for the iron and steel, pulp and paper, and ethylene industry. Dynamic models of these industries are described and then used to investigate alternative carbon emissions and investment-led policies. A comparison of results clearly points towards two key issues: the need for industry specific policy approaches in order to effectively influence industrial energy use, fuel mix and carbon emissions, and the need for longer time horizons than have typically been chosen for the analysis of industrial responses to climate change policies.     

Exergoeconomic and exergoenvironmental analyses of a combined cycle power plant with chemical looping technology

CO₂ capture and storage from energy conversion systems is one option for reducing power plant CO₂ emissions to the atmosphere and for limiting the impact of fossil-fuel use on climate change. Among existing technologies, chemical looping combustion (CLC), an oxy-fuel approach, appears to be one of the most promising techniques, providing straightforward CO₂ capture with low energy requirements.This paper provides an evaluation of CLC technology from an economic and environmental perspective by comparing it with to a reference plant, a combined cycle power plant that includes no CO₂ capture. Two exergy-based methods, the exergoeconomic and the exergoenvironmental analyses, are used to determine the economic and environmental impacts, respectively. The applied methods facilitate the iterative optimization of energy conversion systems and lead towards the improvement of the effectiveness of the overall plant while decreasing the cost and the environmental impact of the generated product. For the plant with CLC, a high increase in the cost of electricity is observed, while at the same time the environmental impact decreases.     

浙江省环境污染与经济发展关系的实证研究

本文在环境库兹涅茨曲线假设基础上,采用1991—2014年浙江省环境和经济数据,运用回归模型对其环境污染与经济发展的关系进行实证检验。结果表明:浙江工业废水、工业废气、工业SO2排放量和工业固体废弃物产生量均符合EKC假设,其中工业SO2和工业废水人均排放量与人均GDP呈倒U形关系,拐点分别出现在2005年与2010年;工业废气排放量和工业固体废弃物产生量尚处于倒U形左侧上升阶段,其中工业固体废弃物人均产生量已接近拐点。而生活污水排放量与EKC假设并不相符,人均生活污水排放量与人均GDP呈单调递增的线形关系。对EKC驱动因子的分析表明,加强政府环境治理,以不断完善的环境法规推动产业结构升级调整,以持续的技术进步与创新促进关键行业节能减排,有利于克服规模效应,推动浙江环境污染与经济发展的关系早日实现解耦。     

The drivers of greenhouse gas emissions: What do we learn from local case studies?

Abstract

What can local case studies contribute to our understanding of the processes underlying the growth in greenhouse gas emissions? Since much abatement and mitigation are local in character, it is important that policy makers identify the mix of local, national and international processes that contribute to changes in greenhouse gas emissions. Drawing upon the results of case studies in Kansas, North Carolina and Ohio, how patterns of emissions in local areas can be connected analytically to the driving forces of environmental change is demonstrated. Emissions at the local level are empirically associated with the same set of trends found at national and international scale, namely, changes in population, affluence‐consumption and technology.     

Economic-environmental modeling of point source pollution in Jefferson County,Alabama, USA

This paper uses an integrated economic-environmental model to assess the point source pollution from major industries in Jefferson County, Northern Alabama. Industrial expansion generates employment, income, and tax revenue for the public sector; however, it is also often associated with the discharge of chemical pollutants. Jefferson County is one of the largest industrial counties in Alabama that experienced smog warnings and ambient ozone concentration, 1996-1999. Past studies of chemical discharge from industries have used models to assess the pollution impact of individual plants. This study, however, uses an extended Input-Output (I-O) economic model with pollution emission coefficients to assess direct and indirect pollutant emission for several major industries in Jefferson County. The major findings of the study are: (a) the principal emission by the selected industries are volatile organic compounds (VOC) and these contribute to the ambient ozone concentration; (b) the direct and indirect emissions are significantly higher than the direct emission by some industries, indicating that an isolated analysis will underestimate the emission by an industry; (c) while low emission coefficient industries may suggest industry choice they may also emit the most hazardous chemicals. This study is limited by the assumptions made, and the data availability, however it provides a useful analytical tool for direct and cumulative emission estimation and generates insights on the complexity in choice of industries.     

基于混合生命周期评价模型的我国食物系统水资源消耗及二氧化碳排放核算

食物生产不仅依赖水资源,同时产生大量二氧化碳排放,这种资源环境影响存在于食物系统整个产业链。为促进食物系统节水降碳,本文构建了包含5大类共23种具体食物部门的混合生命周期评价模型,对各类食物系统的完全水资源消耗和二氧化碳排放进行了核算与比较。结果表明：①不同食物的水资源消耗和二氧化碳排放差异明显,动物性食物的平均水资源消耗和二氧化碳排放强度分别为植物性食物的1.9 ～ 15.0倍和1.9 ～ 2.7倍;②食物系统直接和间接水资源消耗占比较为接近,但二氧化碳排放主要源自上游产业链的间接排放,占比高达80.9%;③食物系统间接水资源消耗主要来自农业部门,而间接碳排放主要来自电力生产和供应业、基础化工原料制造业、非金属矿产品行业和交通运输业;④从营养元素供给看,动物性食物提供蛋白质和脂肪的资源环境影响高于植物性食物,蔬菜和主食分别在提供维生素C和碳水化合物上具有最小的环境成本。基于本文结果,食物系统节水应主要提高生产环节用水效率,而降碳则主要依靠上游产业减排,特别是发电和化肥生产等行业的协同节水减碳潜力。同时,本文结果也可为未来基于环境影响制定膳食指南提供数据支撑。     

Reuse of wastewater for industrial needs: the Pontedera case

This paper presents result from an economic and technical point of view evaluation study, which has sought to establish the potential for replacing well-water that is currently used at the Piaggio industrial plant in Pontedera with recycled wastewater. The study is based upon a pilot wastewater treatment plant, which has been used to test wastewater treatment processes and to compare with achieved quality of recycled waters with that of water drawn on-site from physical/chemical pre-treatment and end with a reverse osmosis and air stripping stage. However, after the physical/chemical pre-treatment, the first option uses oxidation with ozone followed by activated carbon filtration, whereas the second method uses ultrafiltration. The first method is more effective at reducing chemical oxygen demand (COD) whereas the second method is more effective in removing bacteria. Nonetheless, both methods deliver water for re-use of a quality comparable with or better than that of well-water. In principle, the reverse osmosis permeate from either process could be re-used in all production phases at the industrial plant. However, the method base upon oxidation with ozone followed by activated carbon filtration is preferred, because, the process is simpler and continuous. The economic analysis of this process gives an estimated cost of Euro 0.55 per m³ for treated water. This compares favorably with other treatment processes and with the cost of other forms of water supply, which are projected to increase in any case.     

Metrics,decisions, and strategies: Environmental performance measurement in the electric utility industry

The twin challenges of increased competition and environmental consciousness are causing companies in the utility industry to re-examine their methods for measuring environmental performance. A new paradigm is emerging which has already appeared in other industries—treating environmental quality as a potential source of profitability and competitive advantage. This article discusses how utilities and industrial companies can develop an environmental performance measurement framework, integrate it into their strategic and operating business practices, and use it for evaluation of alternative environmental strategies.     

青岛市挥发性有机物排放清单及重点行业排放特征研究

根据收集的青岛市九大类排放源的活动水平数据,本研究采用排放因子法结合调研实测等工作建立了青岛市VOCs源排放清单,结果表明,工业企业VOCs排放占总排放的比例达到43.17%。其中,工艺过程源类中排放占比较高的行业依次为橡胶和塑料制品业、非金属矿物制品业、原油加工及石油制品制造业、化学原料和化学制品制造业、黑色金属冶炼和压延加工业等;溶剂使用源类中排放占比较高的行业为金属制品业、皮革皮毛羽毛制品和制鞋业、印刷业、铁路船舶航空等设备制造业、汽车制造业等。通过对重点行业重点企业进行入场调研采样分析,本研究发现不同行业中VOCs组成特征有差异,多数行业VOCs物种排放以卤代烃、芳香烃、烷烃等为主,纺织印染业、制鞋业等部分行业以含氧有机物排放为主。通过调研和实测对部分行业的VOCs排放因子水平做了本地化深入研究,调研统计青岛市约49%的企业安装了VOCs治理设施;在企业所安装的VOCs治理设施中吸附法占比最大,占比为26%。     

Engaging Economic Development Agencies in Environmental Protection: The case for embedded autonomy

This article examines the role of economic development agencies in strengthening the environmental performance of industry within rapidly industrialising East Asian economies. Three case-study examples are considered, namely, the role of the Industrial Development Board in reducing industrial pollution in Taiwan, pollution control in the palm oil industry in Malaysia, and the role of the Economic Development Board in influencing environmental performance of industry in Singapore. The concept of embedded autonomy is developed to consider the ways in which agencies of economic development can work with firms and industries while simultaneously remaining autonomous from these firms with respect to setting and enforcing performance standards. The three cases suggest that a form of policy integration that more directly integrates economic and environmental goals within agencies of economic development may be feasible, but only where there exists a strong autonomous government bureaucracy and where there is strong societal commitment to improving the environmental performance of industry.     

Local Dirt,Global Dreams: Mining investment and land use change in Arizona

A central problematic for researchers working at the interface of economic and environmental change is the development of research designs and methodologies that can satisfactorily link economic processes of global reach (such as direct investment) to environmental change at local and regional scales. This article reviews recent efforts to couple economic and environmental change and finds that relatively little effort has been made to use the direct investment process as a means of linking industrial restructuring to land use change. The article argues that direct investment, when conceptualised as a political-economic process involving the assemblage of a package of rights (to land, water, pollution permits etc), can be an effective vehicle for tracing through the impacts of industrial restructuring on local environments. To develop this analytical approach, an empirical case of mineral investment in the Gila Valley of eastern Arizona is presented. The case study identifies the acquisition of land and water rights as central strategic issues for mineral firms seeking to make investment, and traces through the impact of these acquisition strategies on existing patterns of land ownership and land use.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

An Analysis of Pollution and Community Advocacy in ‘Cancer Alley’: Setting an Example for the Environmental Justice Movement in St James Parish,Louisiana

Abstract

This study evaluates environmental justice issues in St James Parish, Louisiana. This parish is located along an 85-mile stretch of the Mississippi River which hosts over 100 chemical, petrochemical, refining and industrial plants and is often referred to as ‘Cancer Alley’. With the use of geographic information system (GIS) mapping, it was found that polluting industries are located in the sections of the parish that have the highest percentages of African Americans, the lowest average household income and the most residents without a high school diploma. It was also found that the areas of the parish that have the highest percentage of residents who are employed in the manufacturing industry tend to be the wealthiest in the parish, have the least number of African American residents and have the most residents with the highest levels of education. Second, the levels and types of community advocacy that have occurred in response to the pollution and disproportionate environmental impacts in the parish are evaluated to find the most effective course of action. This study concludes that the most successful way that threatened communities can respond to environmental injustices is to take the initiative to solve the problem, connect with larger groups that have expertise, educate the public, and obtain legal representation.