Evolution of solid waste management in Malaysia: impacts and implications of the solid waste bill, 2007

Solid waste generation and its implications for people and the environment are global issues. The complexity of the waste composition and the ever-increasing percapita waste generation is a challenge for waste managers, particularly in developing countries. Thus, the need to have a clear policy on waste management and legislation to realize that policy is imperative. Malaysia is developing rapidly and problems such as the waste generation associated with development and industrialization are evident. The Solid Waste and Public Cleansing Management Bill, which was approved in August 2007 after a 10-year delay, is envisaged to have serious consequences in waste management practices and implementation in Malaysia. This article explores the main features of this all-encompassing bill and its impacts on the waste management scenario in Malaysia. In addition, a comparative evaluation is also discussed to explore the policies/legislation of selected countries vis-àvis the Malaysian bill.     

Report: policy drivers and the planning and implementation of integrated waste management in Ireland using the regional approach.

Waste management in Ireland has been dramatically transformed over the past 10 years from over 90% reliance on landfill towards a fully integrated approach. According to the latest EPA National Database Report in 2007 our municipal (household and commercial but excluding construction and demolition) recycling rate was 35% in 2005. This has been achieved through the implementation of 10 regional waste management plans all prepared within a new national planning framework in accordance with the Waste Management Act 1996 and Government policy document 'Changing Our Ways', published in 1998 by the Irish Department of the Environment, Heritage and Local Government. The principal drivers of the waste management plans and strategies are the EU Waste Framework Directive (recently revised), the EU Packaging Directive and the EU Landfill Directive. In addition, there were substantial political and environmental drivers due to the relatively poor standard of landfills in Ireland. Strict landfill regulation by the Environment Protection Agency commenced in 1997and led to many closures of poor facilities and new standards of siting design and operation. This has led to very high landfill charges that are only now beginning to stabilize. The key to improving public attitudes to the greatly improving waste management system has been the degree and content of stakeholder involvement programmes. These programmes are now consolidated into a national 'Race against Waste' programme (www.raceagainstwaste.ie). The purpose of the programme is to create awareness and deal with many of the misconceptions in the public mind attached to waste treatment methods especially incineration. Waste management is after all about people.     

Integration of the informal sector into municipal solid waste management in the Philippines – What does it need?

The integration of the informal sector into municipal solid waste management is a challenge many developing countries face. In Iloilo City, Philippines around 220 tons of municipal solid waste are collected every day and disposed at a 10 ha large dumpsite. In order to improve the local waste management system the Local Government decided to develop a new Waste Management Center with integrated landfill. However, the proposed area is adjacent to the presently used dumpsite where more than 300 waste pickers dwell and depend on waste picking as their source of livelihood. The Local Government recognized the hidden threat imposed by the waste picker’s presence for this development project and proposed various measures to integrate the informal sector into the municipal solid waste management (MSWM) program. As a key intervention a Waste Workers Association, called USWAG Calahunan Livelihood Association Inc. (UCLA) was initiated and registered as a formal business enterprise in May 2009. Up to date, UCLA counts 240 members who commit to follow certain rules and to work within a team that jointly recovers wasted materials. As a cooperative they are empowered to explore new livelihood options such as the recovery of Alternative Fuels for commercial (cement industry) and household use, production of compost and making of handicrafts out of used packages. These activities do not only provide alternative livelihood for them but also lessen the generation of leachate and Greenhouse Gases (GHG) emissions from waste disposal, whereby the life time of the proposed new sanitary landfill can be extended likewise.     

What attributes of mandatory waste management policy can enhance the separation intention of residents in China? A behaviour choice experiment

Journal of Material Cycles and Waste Management - China is facing a severe waste siege. Notwithstanding the several years of mandatory policy implementation, the residents’ waste separation...     

Towards zero waste in emerging countries - a South African experience

The aim of this paper is to describe the optimisation of Waste Minimisation/Zero Waste strategies into an already established integrated waste management system and to present a Zero Waste model for post-consumer waste for urban communities in South Africa. The research was undertaken towards the fulfilment of the goals of the Polokwane Declaration on Waste Management [DEAT, 2001. Department of Environmental Affairs and Tourism, Government of South Africa. Polokwane Declaration. Drafted by Government, Civil Society and the Business Community. National Waste Summit, Polokwane, 26-28 September 2001], which has set as its target the reduction of waste generation and disposal by 50% and 25%, respectively, by 2012 and the development of a plan for Zero Waste by 2022. Two communities, adjacent to the Mariannhill Landfill site in Durban, were selected as a case study for a comparative analysis of formal and informal settlements. Since the waste generated from these two communities is disposed of at the Mariannhill landfill, the impact of Zero Waste on landfill volumes could be readily assessed. A Zero Waste scheme, based on costs and landfill airspace savings, was proposed for the area. The case study demonstrates that waste minimisation schemes can be introduced into urban areas, in emerging countries, with differing levels of service and that Zero Waste models are appropriate to urban areas in South Africa.     

Assessment of an appropriate integrated waste management plan targeting the Circular Economy based on the LCA method

Journal of Material Cycles and Waste Management - Rapid population growth and urbanization increase the Municipal Solid Waste (MSW) generation rate and the demand for natural resources. In order to...     

The development of landfill operation and management in Indonesia

Journal of Material Cycles and Waste Management - The enactment of the Waste Act in 2008 represents a milestone in Indonesian waste management legislation, particularly in relation to landfill...     

Changing scenario of municipal solid waste management in Kanpur city,India

Journal of Material Cycles and Waste Management - Generation of municipal solid waste (MSW) depends upon lifestyle, urbanization and income level of population. Solid waste management is one of the...     

Effects of particle size on structural,physical, mechanical and tribology behaviour of agricultural waste (corncob micro/nano-filler) based epoxy biocomposites

Journal of Material Cycles and Waste Management - Solid waste management is one of the major problems in the twenty-first century. Utilizations of the food/Agro waste materials are crucial to...     

Application of mechanical processing operations for the recycling of nickel metal hydride batteries

Journal of Material Cycles and Waste Management - Rapid technological development in recent decades has led to very high generation of waste electrical and electronic equipment, including exhausted...     

Integrated assessment of a new Waste-to-Energy facility in Central Greece in the context of regional perspectives

The main aim of this study is the integrated assessment of a proposed Waste-to-Energy facility that could contribute in the Municipal Solid Waste Management system of the Region of Central Greece. In the context of this paper alternative transfer schemes for supplying the candidate facility were assessed considering local conditions and economical criteria. A mixed-integer linear programming model was applied for the determination of optimum locations of Transfer Stations for an efficient supplying chain between the waste producers and the Waste-to-Energy facility. Moreover different Regional Waste Management Scenarios were assessed against multiple criteria, via the Multi Criteria Decision Making method ELECTRE III. The chosen criteria were total cost, Biodegradable Municipal Waste diversion from landfill, energy recovery and Greenhouse Gas emissions and the analysis demonstrated that a Waste Management Scenario based on a Waste-to-Energy plant with an adjacent landfill for disposal of the residues would be the best performing option for the Region, depending however on the priorities of the decision makers. In addition the study demonstrated that efficient planning is necessary and the case of three sanitary landfills operating in parallel with the WtE plant in the study area should be avoided. Moreover alternative cases of energy recovery of the candidate Waste-to-Energy facility were evaluated against the requirements of the new European Commission Directive on waste in order for the facility to be recognized as recovery operation. The latter issue is of high significance and the decision makers in European Union countries should take it into account from now on, in order to plan and implement facilities that recover energy efficiently. Finally a sensitivity check was performed in order to evaluate the effects of increased recycling rate, on the calorific value of treated Municipal Solid Waste and the gate fee of the candidate plant and found that increased recycling efforts would not diminish the potential for incineration with energy recovery from waste and neither would have adverse impacts on the gate fee of the Waste-to-Energy plant. In general, the study highlighted the need for efficient planning in solid waste management, by taking into account multiple criteria and parameters and utilizing relevant tools and methodologies into this context.     

Understanding the RCRA corrective action process

The Resource Conservation and Recovery Act (RCRA) was enacted in 1976. The Hazardous and Solid Waste Amendments (HSWA) of 1984 specify “corrective action” requirements for protecting human health and the environment from environmental contamination at active hazardous waste treatment, storage, and disposal facilities. RCRA and its corrective action requirements are designed to prevent the creation of new Superfund sites by regulating and remediating active facilities. The RCRA corrective action process has four basic components: the facility assessment, facility investigation, corrective measures study, and corrective measures implementation. This article presents an overview of the RCRA corrective action process and presents four case studies from three U.S. EPA regions.     

Valorization of EVA waste from footwear industry as natural aggregates substitutes in mortar: the effect of granulometry

Journal of Material Cycles and Waste Management - The increased consumption of polymers and the consequent generation of waste requires the development of efficient recycling strategies. In this...     

Recovery of metals and polymers from coaxial cables using different configurations of electrostatic separators

Journal of Material Cycles and Waste Management - Technological development has led to a growing generation of waste electrical and electronic equipment, including cables. This work concerns the...     

Municipal solid waste composition determination supporting the integrated solid waste management system in the island of Crete

A one-year survey was conducted in the greater region of Crete (located at the lower region of the Aegean Sea) for the purpose of identifying waste composition (including chemical and physical characterization), as well as any seasonal variation. The investigation was carried out repeatedly at seven landfills and one transfer station in Crete, in four phases. Each sampling phase corresponded to a season (autumn, winter, spring, summer). ASTM D5231-92(2003) standard method and RCRA Waste Sampling Draft Technical Guidance were used. Hand sorting was used for classifying the collected wastes into the following categories: plastics, paper, metals, aluminium, leather-wood-textiles-rubbers, organic wastes, non-combustibles and miscellaneous. Further analysis included proximate and ultimate analysis of combustible materials. Metals such as lead, cadmium and mercury were also investigated. The results show that there has been a significant decrease of organic wastes during the last decade due to the increase of packaging materials, as a result of a change in consumption patterns. Three main waste categories were determined: organic wastes, paper and plastics, which combined represent 76% of the total waste in Crete. Furthermore, a high fraction of glass and a seasonal variation of aluminium indicate a strong correlation of waste composition with certain human activities, such as tourism. There is also a variation between the municipal solid waste (MSW) composition in the region of Crete (2003-2004) and MSW composition suggested in the National Solid Waste Planning (2000) [National Solid Waste Planning, 2000. Completion and particularization of Common Ministerial Act 113944//1944/1997: National Solid Waste Planning, June 2000]. The results of this survey are to be utilized by the regional solid waste authorities in order to establish an integrated waste treatment site, capable of fulfilling the regional waste management demands.     

Policy-making coordination of municipal solid waste policies in China: a content analysis

Journal of Material Cycles and Waste Management - Massive urbanization and rapid development of urban economy have increased the generation of municipal solid waste in China. Like all developing...     

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong

Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C&D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C&D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006–2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C&D waste.     

Decomposition analyses of the municipal waste generation and management in Croatian and Slovenian regions

Journal of Material Cycles and Waste Management - The purpose of this study is to analyse how much waste generation activity influenced the amounts of waste which were sent for recovery or...