Betulinol and wood sterols in sediments contaminated by pulp and paper mill effluents: dissolution and spatial distribution

The goal was to determine dissolution potency of betulinol and wood sterols (WSs) from pulp and paper mill-contaminated sediments and the current stratification for assessment the load due to potential erosion in the river-like watercourse. Both compounds are wood extractives, which may be toxic to benthos and fish. This research continues a study in which other wood extractives, resin acids and their derivative, retene, were analysed. Sediments were collected from 1, 3.5, 12, 15, and 33 km downstream from the pulp and paper mills, and from 2 upstream reference sites. The dissolution potency into sediment–water elutriates (1?+?4?v/v) was studied by two agitation times and temperatures. The vertical amounts of extractives were determined from the uppermost 20 cm of sediment. The amounts of extractives potentially released were estimated from the sediment layers 0–2 and 2–5 cm by using spatial interpolation. According to the interpolation, the total amount of betulinol and β-sitosterol was calculated as kg/ha in the whole sediment area. Significant concentrations of betulinol (1,666 μg/g, dw) and WSs (2,886 μg/g, dw) were measured from the sediments. According spatial interpolation, the highest calculated amount of betulinol (4,726 kg/ha) and that of the most abundant WS, β-sitosterol (3,571 kg/ha), were in the lake where the effluents were discharged. In the dissolution experiment, the highest concentration of betulinol in sediment (0–10 cm) and elutriate was 412 μg/g (dw) and 165 μg/l, respectively. For WSs, concentrations were 768 μg/g (dw) in sediment and 273 μg/l in elutriate. In a worst-case scenario, betulinol may be desorbed to water in concentrations which are hazardous to aquatic animals. Instead WSs are not a risk in this study area. The amount of desorption varied depending on the concentration of contaminants in sediment, the nature of disturbance, and the sediment organic carbon content.     

Environmental fate and bioavailability of wood preservatives in freshwater sediments near an old sawmill site.

Impacts of an old contaminated sawmill site located in Eastern Finland were studied, with emphasis on transportation and bioaccumulation of wood preservatives in the surrounding water system. To assess the transportation of chlorophenols and chromated copper arsenate (CCA) from the sawmill to the nearby lake, the concentrations of these compounds in selected sediment samples were analyzed. To assess the contribution of a pulp mill further upstream, the concentration of extractable organic halogens (EOX) was analyzed. Bioaccumulation of wood preservatives from sediments was examined using Lumbriculus variegatus as test organism. In sediments collected from the sawmill area, concentrations of chlorophenols, arsenic, chromium and copper were high. In the surrounding area the concentrations of these compounds were slightly elevated at some sampling points but were mostly within the natural range of variation. Thus, it can be concluded that transportation of wood preservatives from the sawmill area to its surroundings is fairly low. However, 60 microg/l of arsenic and 50 microg/l of copper were found in water taken from a brook that runs through a landfill area of the sawmill to the nearby river, and the concentration of arsenic in the surface sediment at one sampling point in the lake was slightly elevated. The total amount of organohalogens in sediment was higher in the river and the lake than in the sawmill area. Of all the wood preservatives studied, only arsenic was found to bioaccumulate in present conditions, reaching a tissue concentration of 362 microg/g dw in organisms exposed for 28 days to sediment from the brook. High concentration of arsenic in oligochaeta tissue was related to high concentration of arsenic in the pore water.     

Do aquatic effects or human health end points govern the development of sediment-quality criteria for nonionic organic chemicals ?

The equilibrium partitioning theory may be used to describe the partitioning of nonionic organic chemicals between water, sediment, and aquatic biota. This paradigm was employed to compare the relative magnitudes of organic carbon-normalized sediment-quality criteria that are intended to protect either benthic organisms from the direct toxic effects of sediment-associated chemicals or humans from the indirect health effects posed by the ingestion of contaminated aquatic animals. Comparison of calculated sediment-quality criteria for a variety of hydrophobic chemicals suggests that human health-based end points often result in more restrictive criteria than aquatic effects-based values. Review of published field data indicates that the equilibrium partitioning paradigm may, depending on contaminant class, either over- or underestimate the extent to which sediment-associated contaminations are bioaccumulated. Despite the limitations of adopting this simple theory for criteria development, calculations reveal that regulatory decisions involving sediments contaminated with such chemicals may be dictated by human health concerns if current risk assessment methodologies are applied.     

Effect of overlying water pH, dissolved oxygen, salinity and sediment disturbances on metal release and sequestration from metal contaminated marine sediments

Experiments were undertaken to examine the key variables affecting metal release and sequestration processes in marine sediments with metal concentrations in sediments reaching up to 86, 240, 700, and 3000 mg kg(-1) (dry weight) for Cd, Cu, Pb and Zn, respectively. The metal release and sequestration rates were affected to a much greater extent by changes in overlying water pH (5.5-8.0) and sediment disturbance (by physical mixing) than by changes in dissolved oxygen concentration (3-8 mg l(-1)) or salinity (15-45 practical salinity units). The physical disturbance of sediments was also found to release metals more rapidly than biological disturbance (bioturbation). The rate of oxidative precipitation of released iron and manganese increased as pH decreased and appeared to greatly influence the sequestration rate of released lead and zinc. Released metals were sequestered less rapidly in waters with lower dissolved oxygen concentrations. Sediments bioturbated by the benthic bivalve Tellina deltoidalis caused metal release from the pore waters and higher concentrations of iron and manganese in overlying waters than non-bioturbated sediments. During 21-day sediment exposures, T. deltoidalis accumulated significantly higher tissue concentrations of cadmium, lead and zinc from the metal contaminated sediments compared to controls. This study suggests that despite the fact that lead and zinc were most likely bound as sulfide phases in deeper sediments, the metals maintain their bioavailability because of the continued cycling between pore waters and surface sediments due to physical mixing and bioturbation.     

Arsenic mobility in contaminated lake sediments

An arsenic contaminated lake sediment near a landfill in Maine was used to characterize the geochemistry of arsenic and assess the influence of environmental conditions on its mobility. A kinetic model was developed to simulate the leaching ability of arsenic in lake sediments under different environmental conditions. The HM1D chemical transport model was used to model the column experiments and determine the rates of arsenic mobility from the sediment. Laboratory studies provided the information to construct a conceptual model to demonstrate the mobility of arsenic in the lake sediment. The leaching ability of arsenic in lake sediments greatly depends on the flow conditions of ground water and the geochemistry of the sediments. Large amounts of arsenic were tightly bound to the sediments. The amount of arsenic leaching out of the sediment to the water column was substantially decreased due to iron/arsenic co-precipitation at the water-sediment interface. Overall, it was found that arsenic greatly accumulated at the ground water/lake interface and it formed insoluble precipitates.     

The effect of resuspending sediment contaminated with antifouling paint particles containing Irgarol 1051 on the marine macrophyte Ulva intestinalis

The effect of resuspending sediment contaminated with Irgarol 1051 based antifouling paint particles on the green macroalga Ulva intestinalis was examined. U. intestinalis was also exposed to sediment spiked with Irgarol 1051. The macroalga were exposed over 21 days to the resuspension of sediments containing 61.2 mg kg(-1) of antifouling paint particles containing Irgarol 1051 that provided aqueous Irgarol 1051 concentrations of approximately 0.3 microg l(-1), Irgarol 1051 and appropriate controls. The growth response was compared with that for 'clean' sediment. Resuspension of sediment was associated with reduced growth when compared to seawater alone. Resuspension of sediment spiked with Irgarol 1051 was associated with a greater reduction in growth, with growth being significantly reduced when sediment containing antifouling paint particles was resuspended. The data suggest that the prolonged disturbance of sediments containing antifouling paint particles in marinas represents a potential and as yet unquantified hazard to photosynthetic organisms.     

A laboratory study of sediment and contaminant release during gas ebullition

Significant quantities of gas are generated from labile organic matter in contaminated sediments. The implications for the gas generation and subsequent release of contaminants from sediments are unknown but may include enhanced direct transport such as pore water advection and diffusion. The behavior of gas in sediments and the resulting migration of a polyaromatic hydrocarbon, viz phenanthrene, were investigated in an experimental system with methane injection at the base of a sediment column. Hexane above the overlying water layer was used to trap any phenanthrene migrating out of the sediment layer. The rate of suspension of solid particulate matter from the sediment bed into the overlying water layer was also monitored. The experiments indicated that significant amounts of both solid particulate matter and contaminant can be released from a sediment bed by gas movement with the amount of release related to the volume of gas released. The effective mass transfer coefficient of gas bubble-facilitated contaminant release was estimated under field conditions, being around three orders of magnitude smaller than that of bioturbation. A thin sand-capping layer (2 cm) was found to dramatically reduce the amount of contaminant or particles released with the gas because it could prevent or at least reduce sediment suspension. Based on the experimental observations, gas bubble-facilitated contaminant transport pathways for both uncapped and capped systems were proposed. Sediment cores were sliced to obtain phenanthrene concentration. X-ray computed tomography (CT) was used to investigate the void space distribution in the sediment penetrated by gas bubbles. The results showed that gas bubble migration could redistribute the sediment void spaces and may facilitate pore water circulation in the sediment.     

Resuspension of contaminated field and formulated reference sediments Part I: Evaluation of metal release under controlled laboratory conditions

In aquatic systems where metal contaminated sediments are present, the potential exists for metals to be released to the water column when sediment resuspension occurs. The release and partitioning behavior of sediment-bound heavy metals is not well understood during resuspension events. In this study, the release of Cd, Cu, Hg, Ni, Pb and Zn from sediments during resuspension was evaluated using reference sediments with known physical and chemical properties. Sediment treatments with varying quantities of acid volatile sulfide (AVS), total organic carbon (TOC), and different grain size distributions were resuspended under controlled conditions to evaluate their respective effects on dissolved metal concentrations. AVS had the greatest effect on limiting release of dissolved metals, followed by grain size and TOC. Predictions of dissolved concentrations of Cd, Ni, Pb and Zn were developed based on the formulated sediment Σ_metal/AVS ratios with Σ_metal being the total sediment metal concentration. Predicted values were compared to measured dissolved metal concentrations in contaminated field sediments resuspended under identical operating conditions. Metal concentrations released from the field sediments were low overall, in most cases lower than predicted values, reflecting the importance of other binding phases. Overall, results indicate that for sulfidic sediments, low levels of the study metals are released to the dissolved phase during short-term resuspension.     

Desorption of chlorinated hydrocarbons from spiked and anthropogenically contaminated sediments

The desorption of 20 chlorinated organics from sediments has been studied using a nitrogen purge/Tenax trap system for separating the “dissolved” and “sorbed” fractions in sediment/water slurries. The desorption partition coefficient, K_D, was found to decrease with increasing temperature and suspended sediment concentration. While some differences in K_D and desorption rates were observed for the study chemicals, considering their wide range of physical/chemical properties such as K_OW, these changes were small. Desorption half-lives averaged about 60d at 4°C, 40d at 20°C and 10d at 40°C under continuous gaseous purging. Estimates of the loadings of chemicals via desorption from bottom sediments in Lake Ontario are compared to loadings of these chemicals to the lake from the Niagara River.     

Sorption kinetics of chlorinated hydrophobic organic chemicals

This is the second of a two-part series describing the sorption kinetics of hydrophobic organic chemicals. Part I “The Use of First-Order Kinetic Multi-Compartment Models” is published in issue 1 of this journal, pp. 21–28. Sorption kinetics of chlorinated benzenes from a natural lake sediment have been investigated in gas-purge desorption experiments. Biphasic desorption curves, with an initial “fast” part and a subsequent “slow” part, were found for all tested chlorobenzenes. From these results first-order sorption uptake and desorption rate constants were calculated with a two-sediment compartment model, which is presented in the first paper. In three sets of experiments the sorption uptake period and sediment/water ratio were varied. Rate constants are not influenced by these experimental conditions, which supports the partitioning concept for the sorption of hydrophobic organic chemicals in sediments.     

Accumulation and partition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) in the muscle and liver of fish

The present study monitored fish from sites contaminated for many years, and the data reflected the results of actual, long-term environmental exposure. The sum concentrations and TEQs of PCDD/F in the muscle of common carp (Cyprinus carpio (linnaeus)) and big head (Aristichthys nobilis) from the different site of a heavily polluted lake in China are decreased with decrease of PCDD/F concentration in sediment and water. Concentration in fish can be highly variable, but the concentration is comparable in muscle between different species of fish if the concentrations are normalized by lipid content. PCDD/F accumulate in certain tissues with the highest proportions found in the liver of fish. The concentrations and TEQs in livers were also decreased with concentrations of sediments and water. The concentrations of PCDD/F in muscle are significantly correlated with those in liver. BCFs of 2,3,7,8-substituted PCDD/F calculated directly from water were consistent with that calculated indirectly from sediment. PCDD/F concentrations in sediment are much higher than that in water, therefore the measurement is much easier and the results are more accurate. Estimated BCFs for superhydrophobic chemicals derived from sediment may also serve as acceptable surrogates for "true" bioaccumulation potential.     

Persistent organic pollutants in water and surface sediments of Taihu Lake,China and risk assessment

Organic pollutants, especially persistent organic pollutants were examined in the water and surface sediments of Taihu Lake, China. Both 12 water and 12 sediment samples were collected over the lake. C-18 solid-phase extraction technique was applied to extract organic pollutants in collected water samples. Soxhlet extraction procedure was used to extract organic pollutants in sediment samples. The analysis was performed by GC-MS controlled by a Hewlett Packard chemstation. Two hundred and seventy-three kinds of organic chemicals in water were examined, 200 more than that detected in 1985; 188 kinds of chemicals in sediments were detected as well. Among them 21 kinds of chemicals belong to priority pollutants as well as 17 kinds to be the endocrine disruptors. The concentrations of the pollutants were more than 2 times higher than that in 1985. The possible source and relation to anthropogenic activity were discussed.     

Mineralogical study and leaching behavior of a stabilized harbor sediment with hydraulic binder

The environmental assessment of potential effects of contaminated harbor sediments stabilized with hydraulic binders and the determination of remediation endpoints require the determination of pollutants leaching potentials. Moreover, little information about the speciation and mobility of inorganic contaminants in these specific solid matrices is available in the literature. The objective of this paper is to investigate the relationship between mineralogy and leachability of contaminants (copper, lead, and zinc) present in a French harbor sediment stabilized with quicklime and Portland cement. Batch equilibrium leaching tests at various pH, chemical analysis of leachates, and mineralogical studies (X-ray diffraction, scanning electron microscopy–energy dispersive spectroscopy, and diffuse reflectance infrared Fourier transform) have been combined in the present investigation. The acid neutralization capacity of the stabilized matrix studied is first controlled by the dissolution of portlandite (pH?~12), followed by the dissolution of C–S–H (pH?~11) and the dissolution of ettringite (pH?~10). Finally, a very high buffering capacity of this stabilized sediment is observed for pH values around 6. This equilibrium is mainly controlled by the dissolution of iron sulfides and carbonate minerals. Consequently, the mobilization of inorganic contaminants as a function of pH remains very low (<0.1 wt%) for pH values above 6 and significantly increases for pH below these values. This research confirms the importance of a combined methodology for the intrinsic characterization of potential mobilization of contaminants in a stabilized sediment and for a better understanding of geochemical processes that affect contaminant fate, transformation, and transport in the subsurface environment.     

Tributyltin partitioning in sediments: effect of aging

The effect of aging on the solid/pore-water partitioning and desorption behaviour of tributyltin (TBT) in sediments was examined. Three sediment samples with contrasting physical and chemical properties were spiked with 10 mg/kg TBT and aged under sterile conditions for periods of time ranging from 1 to 84 days. Aging had a negligible effect on partitioning and desorption behaviour in a sandy sample with very low organic carbon content (0.2% w/w). In contrast, for samples with larger amounts of organic carbon (2.6% and 4.8% w/w), aging caused substantial increases in TBT sorption. For these samples, apparent distribution coefficients (KD,app) obtained from sequential 2 h desorption experiments also exhibited a twofold increase between spiked sediments subjected to aging for 1 day and 84 days. This study demonstrates that aging effects may be an important aspect of TBT fate in contaminated sediments.     

Levels and distribution of Dechloranes in sediments of Lake Taihu,China

The occurrence and spatial distribution of dechloranes including mirex, dechlorane plus (DP), dechlorane (Dec) 602, Dec 603, and Dec 604 in surficial sediments of Lake Taihu were investigated in this study. The concentrations of mirex and DP ranged from below detection limit (BDL) to 1.29 ng g^?1 dw and 0.051 to 2.10 ng g^?1 dw, respectively. Dec 602, Dec 603, and Dec 604 on the other hand, were BDL in any of the samples. The contamination levels of DP were higher than that of Mirex at 21 of all 22 sampling sites. Levels of mirex and DP in the lake sediments were correlated when an extremely high mirex value was removed. Both mirex and DP levels were correlated with the amount of organic matters in the sediment samples. Spatial distribution of mirex and DP suggested that these two chemicals in the lake had similar input sources except for one site. Comparison to previously reported flame retardants’ levels in the sediments shows that DP levels were similar with the levels of tetrabromobisphenol A, hexabromocyclododecane but lower than PBDEs and organophosphates levels in Lake Taihu. The higher levels in the north-east part of Lake Taihu adjacent to two major cities: Wuxi and Suzhou, indicated that city effluent might be a major source for DP contamination in the lake.     

Response of sediment calcium and magnesium species to the regional acid deposition in eutrophic Taihu Lake,China

Acid deposition causes carbonate dissolution in watersheds and leads to profound impacts on water chemistry of lakes. Here, we presented a detailed study on the seasonal, spatial, and vertical variations of calcium and magnesium species in the overlying water, interstitial water, and sediment profiles in eutrophic Taihu Lake under the circumstance of regional acid deposition. The result showed that both the acid deposition and biomineralization in Taihu Lake had effects on Ca and Mg species. In the lake water, calcium carbonate was saturated or over-saturated based on long-term statistical calculation of the saturation index (SI). On the sediment profiles, significant difference in Ca and Mg species existed between the surface sediment (0–10 cm) and deeper sediments (>10 cm). The interstitial water Ca²⁺ and Mg²⁺, ion-exchangeable Ca and Mg in the surface sediment were higher than those in the deeper sediment. In the spring, when the acid deposition is more intensive, the acid-extracted Ca and Mg in the surface sediment were lower than that in the deeper sediment in the northwest lake, due to carbonate dissolution caused by the regional acid deposition. Spatially, the higher concentration of acid-extracted Ca and Mg in the northwest surface sediment than that in the east lake was observed, indicating the pronounced carbonate biomineralization by algae bloom in the northwest lake. Statistical analysis showed that acid deposition exerted a stronger impact on the variation of acid-extracted Ca and Mg in the surface sediment than the biomineralization in Taihu Lake. For the total Ca and Mg concentration in the spring, however, no significant change between the surface and deeper sediment in the northwest lake was observed, indicating that the carbonate precipitation via biomineralization and the carbonate dissolution due to acidic deposition were in a dynamic balance. These features are of major importance for the understanding of combined effects of acid deposition and eutrophication on freshwater lakes.

     

太湖内源释放及营养盐输运研究

从对流-扩散方程出发,通过公式推导,建立了包含底泥污染的水流-水质模型,对模型进行了率定和验证后,应用于太湖.该模型将湖泊水相和内源悬移相污染作为一个整体,结合污染物在悬移泥沙上的各种迁移过程,研究了太湖总氮、总磷内源释放的分布和数量,过程中考虑了悬移泥沙的各种影响因素,得到了较理想的模拟结果,当风速≤3.5 m/s时,冲刷和悬移造成的内源污染物释放量较小,内源污染物释放主要通过泥-水界面的静态释放;当风速>3.5 m/s时,冲刷和悬移造成的内源污染物释放量随风速增加迅速增大.通过计算得出2001年太湖内源释放的总氮为3.0万t,总磷为0.8万t.     

Long-term copper partitioning of metal-spiked sediments used in outdoor mesocosms

Understanding the effects of sediment contaminants is pivotal to reducing their impact in aquatic environments. Outdoor mesocosms enable us to decipher the effects of these contaminants in environmentally realistic scenarios, providing a valuable link between laboratory and field experiments. However, because of their scale, mesocosm experiments are often complex to set up and manage. The creation of environmentally realistic conditions, particularly when using artificially contaminated sediment, is one issue. Here, we describe changes in geochemistry over 1.5 years of a sediment spiked with four different concentrations of copper, within a large freshwater mesocosm facility. The spiking procedure included proportional amendments with garden lime to counteract the decreases in pH caused by the copper additions. The majority of copper within the spiked mesocosm sediments partitioned to the particulate phase with low microgram per liter concentrations measured in the pore waters and overlying waters. The minimum partition coefficient following equilibration between pore waters and sediments was 1.5?×?10⁴ L/kg, which is well within the range observed for field-contaminated sediments (1?×?10⁴ to 1?×?10⁶ L/kg). Recommendations are made for the in situ spiking of sediments with metals in large outdoor mesocosms. These include selecting an appropriate sediment type, adjusting the pH, allowing sufficient equilibration time, and regular mixing and monitoring of metal partitioning throughout the experimental period.     

Distribution of sewage pollution around a maritime Antarctic research station indicated by faecal coliforms, Clostridium perfringens and faecal sterol markers

This study describes the distribution of sewage pollution markers (faecal coliforms, Clostridium perfringens and faecal sterols) in seawater and marine sediments around Rothera Research Station, Antarctic Peninsula. Untreated sewage waste has been released from this site since 1975, creating the potential for long-term contamination of the benthic environment. Faecal coliform concentrations in seawater reached background levels within 300 m of the outfall. In sediment cores, both C. perfringens and faecal coliform concentrations declined with distance from the outfall, though C. perfringens persisted at greater depths in the sediment. High concentrations of 5beta(H)-cholestan-3beta-ol (coprostanol) relative to the corresponding 5alpha-epimer (cholestanol), indicative of sewage pollution, were only found in sediments within 200 m of the sewage outfall. This study has shown that sewage contamination is limited to the immediate vicinity of the sewage outfall. Nevertheless, a sewage treatment plant was installed in February 2003 to reduce this contamination further.     

Limitations of reverse polyethylene samplers (RePES) for evaluating toxicity of field contaminated sediments

Passive samplers are used to measure dissolved nonionic organic contaminants (NOCs) in environmental media. More recently, reverse polyethylene samplers (RePES) have been used with spiked sediments to recreate interstitial water exposure concentrations and observed toxicity. In the present study, RePES were used with field contaminated sediments. The RePES was not capable of recreating the pattern of toxicity with the amphipod and mysid observed with intact field sediments. Decreased survival in the RePES exposures as compared to the whole sediment exposures was most likely caused by an overexposure to NOCs due to a lack of surrogate black carbon in the RePES system. As an alternative, aqueous phase studies were performed in which polyethylene was allowed to equilibrate with slurries of intact sediments for 3 weeks. Three weeks was found to be an insufficient amount of time for the polyethylene to equilibrate with the sediment. An additional study demonstrated 3 months was sufficient for lower contaminant concentrations, but might not be an adequate amount of time for more highly contaminated sediments. The aqueous phase transfer approach may be useful if equilibration is sufficiently long, although this length of time may be impractical for use in certain applications, such as toxicity identification evaluations (TIEs).