Efficiency of Modified Composite Biosorbent for Bioremoval of Phosphate Ions in Aqueous Area: Process Modeling Studies

This paper was focused on the biosorption of phosphate ions from aqueous solution onto the cetyltrimethylammonium bromide (CTAB) modified multi-component biosorbent composed of pine, oak, hornbeam and fir sawdust biomasses. A series of batch tests were conducted and the effects of solution pH, ion concentration, quantity of biosorbent and contact time on the bioremoval of phosphate ions were investigated. The biosorption data of kinetic and equilibrium were modeled using various mathematical equations. The phosphate removal increased with increased ion concentration and decreased with increased pH and biosorbent quantity values. The equilibrium state was reached within 120 min of exposure time. The process kinetics was best described by Elovich model while the isotherm data of biosorption best obeyed Freundlich equation. The obtained results revealed that the use of CTAB modified mix sawdust biosorbent presented interesting options for bioremediation of contaminated environments and waste recycling (as nutrient fertilizer and compost material).     

Synthesis of Gum Acacia Capped Polyaniline-Based Nanocomposite Hydrogel for the Removal of Methylene Blue Dye

In this research work, a novel gum acacia capped polyaniline-based nanocomposite hydrogel (GPA NCHs) was developed and evaluated for the adsorptive removal of cationic methylene blue dye (MB) from aqueous solutions. Firstly, Gum acacia (GA) capped Polyaniline (PANI) dispersion was synthesized by using dispersion polymerization. Then, a water-swellable hydrogel network consisting of GA-PANI and acrylamide (AM) was obtained by using N,N′ -methylene-bisacrylamide (MBA) as a cross-linker, and ammonium persulphate/N,N,N′,N′-tetramethylethylenediamine (APS/TMEDA) as an initiating system. The developed materials were characterized by UV–visible, FTIR, XRD, SEM–EDX and TEM techniques. The microscopy studies revealed that GA-PANI nanoparticles have a granular morphological surface with an average size of?~?40–100 nm. Removal of MB dye from aqueous system was performed by adsorption studies in batch equilibrium mode with different dosage of GA-PANI, MB concentration, pH and temperatures. The adsorption data revealed that the absorption capacity of GPA NCHs highly depends on the dosage of GA-PANI, pH and concentration of the MB dye. The maximum percentage of MB removal onto GPA 1.0 NCHs was found to be 89% at pH 10 with a dye concentration of 10 mg L^?1. The equilibrium adsorption data were also analyzed by different models to understand the adsorption process. The results revealed that the adsorption process followed the pseudo-second-order kinetics and it fit well in Langmuir and Freundlich adsorption isotherms with a maximum adsorption capacity of 35.41 mg g^?1. These studies demonstrate that the GPA NCHs could be a promising adsorbent material for the removal of MB dye from contaminated aqueous systems.

     

Poly(Acrylic Acid) Grafted Sodium Alginate Di-Block Hydrogels as Efficient Biosorbents; Structure-Property Relevance

Naturally-based poly(acrylic acid) grafted sodium alginate di-block hydrogels were investigated as high efficiency biosorbents for copper(II) ion. The grafted di-block hydrogel was characterized using FTIR, TGA and SEM techniques. Blank and immobilized algal biosorbent beads formed via 2.0% (w/w) calcium ions were also investigated. Batch adsorption experiments revealed optimal pH dependence of copper(II) ion biosorption at pH 5.5 with high efficient copper(II) ion uptake of 98.5 mg/g. The dynamics studies showed that the high efficiency copper(II) ion biosorption followed pseudo-second order kinetics with significant contribution of intraparticle diffusion mechanism. The equilibrium data fitted to Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) adsorption isotherm models. Thermodynamics parameters for copper(II) biosorption on blank and immobilized algal beads depicted the spontaneous nature of the biosorption process. Such high efficiency, feasibility, simplicity, and low cost properties adapt the di-block biosorbent to be the next generation promising biosorbents for water decontamination and to help in the recovery of the missing ecologic harmony.     

Fe/SiO_2复合材料的制备及其对Cd~(2+)的吸附

以Na_2SiO_3为原料、聚乙二醇-2000为结构导向剂,采用溶胶-凝胶和高温煅烧两步法制备SiO_2微球,再以其为载体,采用液相还原法负载零价纳米铁,制得Fe/SiO_2复合材料。采用SEM,FTIR,XRD技术对Fe/SiO_2复合材料的形貌结构进行表征,研究了Fe/SiO_2复合材料对Cd~(2+)的吸附性能。表征结果显示,纳米铁以毛绒状负载在SiO_2微球上。实验结果表明,在溶液pH为5、n(SiO_2):n(Fe)=2、老化温度为70℃的最佳工艺条件下制备的Fe/SiO_2复合材料在25℃时处理Cd~(2+)初始质量浓度为35 mg/L的模拟含Cd~(2+)废水,Cd~(2+)吸附容量为28.10 mg/g。Fe/SiO_2复合材料对Cd~(2+)的吸附作用较符合准二级吸附动力学方程,对Cd~(2+)的等温吸附过程更符合Langmuir模型。     

Synthesis,Characterization and Application of α, β, and γ Cyclodextrin-Conjugated Graphene Oxide for Removing Cadmium Ions from Aqueous Media

In this study, a novel and facile route for the synthesis of cyclodextrin-conjugated graphene oxide (CDs–GO) nanocomposites by esterification reaction in the presence of EDC/DMAP as catalyst, was developed. The formation of CDs–GO was successfully approved by FT-IR, SEM, TEM, TGA and BET analyses. Then competitive adsorption capacity of cadmium ion by CDs–GO composites and the impact of different empirical parameters like contact time, initial metal ion concentration, and initial pH on the adsorption process were studied. The results showed that β-CD–GO at pH 7 is suitable for removing Cd(II) with 90?% removal efficiency. Also, the adsorption capacity experiment at constant concentration of 50 ppm of Cd(II) showed that more than 50?% of Cd(II) ions could be adsorbed by γ-CD–GO reaching an equilibrium within 2 h. Therefore, the γ-CD–GO and α-CD–GO showed high adsorption capacity toward Cd²⁺ (222.22 mg/g) which were pointedly more than that of β-CD–GO (208.33 mg/g). Furthermore, adsorption kinetics, isotherm studies, and thermodynamic analyses were evaluated. The adsorption data exhibited excellent fit to the pseudo-second-order (R²?>?0.99) and Freundlich isotherm models.

     

Removal of Oil from Water by Calcium Alginate Hydrogel Modified with Maleic Anhydride

Calcium alginate hydrogel was prepared and used as a biosorbent for the removal of oil from aqueous solutions. Calcium alginate hydrogel was further chemically modified by esterification with maleic anhydride. The changes in the physicochemical properties of maleic anhydride modified calcium alginate were investigated via multiple techniques (FTIR, SEM, BET and DSC/TGA). Adsorption batch experiments were carried out to compare the oil adsorption capacities of native and modified calcium alginates. Adsorption experiments were carried out as a function of solution pH, temperature and ionic strength to determine the optimal conditions for the adsorption of oil. Equilibrium and kinetic studies were conducted for the modified alginate. Results revealed that the maleic anhydride modification of calcium alginate improved its adsorption capacity towards oil. Higher adsorption capacities of modified alginate were attained at lower temperatures (20 °C), higher ionic strengths (1.0 M NaCl) and within the pH range of 5–9. The oil adsorption data obtained for modified alginate could be better described by the first order kinetic model (R²?=?0.981) and the BET equilibrium isotherm (R²?=?0.984). The maximum monolayer adsorption capacity predicted by the BET model for the modified calcium alginate was found to be 143.0 mg/g.     

Effective Removing of Remazol Black B by the Polyacrylamide Cryogels Modified with Polyethyleneimine

In this study, modified polyacrylamide (PAAm) cryogels with high dye holding capacity were synthesized with an easily and cheaply process and adsorption of Remazol Black B (RBB) with the synthesized materials was investigated. Firstly, PAAm cryogels were synthesized with free radical cryo-copolymerization method and they were modified with Hofmann reaction to form amine groups in the structure of the cyrogels. Then, to increase the removal efficiency of cryogels, polyethylenimine (PEI) molecules were crosslinked onto the cryogels via NH₂ groups present in the PAAm gels modified by the Hofmann reaction. The original and modified cryogels were characterized with fourier transformed infrared spectroscopy, ¹³C nuclear magnetic resonance spectroscopy, scanning electron microscopy and thermogravimetric analysis. The point of zero charge (pH_pzc) of the modified cryogels was found to be 7.13 and RBB removing capabilities of PEI-modified PAAm cryogels were investigated at pH between 2 and 7. In addition, the adsorption treatments were performed at different process time, incubation temperature, initial dye concentration and adsorbent amount to find maximum removal capacity of the adsorbent. The modified cryogels adsorbed maximum amount of RBB at pH 2 and the sorption process reached equilibrium in 6 h. It was observed that the adsorption efficiency did not change much with the increase in temperature. The maximum RBB removal capacity of the modified cyrogels was determined to be 201 mg/g when the initial RBB concentration was 200 mg/L, treatment time was 6 h at pH 2. Moreover, the adsorption of RBB dye with the modified cryogels takes place with a second order kinetic and RBB dye adsorption data showed compliance with the Langmuir isotherm. The findings of the study expose that the obtained PEI-modified PAAm cryogels are a hopeful material for RBB removal in aqueous environment.

     

Removal of fluoride from water using aluminum-modified activated carbon prepared from khat (Catha edulis) stems

This study investigated the fluoride removal efficiency and adsorption of a low-cost adsorbent prepared using aluminum-modified activated carbon from khat (Catha edulis) in a batch-mode reactor. The operating factors, including pH, adsorbent dose, and fluoride initial concentration, were optimized using the Box Behnken design of response surface methodology. The correlation coefficient (R²) for the removal of fluoride was found to be 0.93, showing the validity of the developed quadratic model. The results showed that, under optimized conditions of an adsorbent dose of 2.47 g/L, an initial fluoride concentration of 2.1 mg/L, an initial pH 6.08, and 60 min, 90% fluoride reduction was achieved. Meanwhile, the adsorption isotherm and kinetics followed the Langmuir adsorption model and the Pseudo second model, respectively, with a monolayer adsorption capacity of 0.3065 mg/g. On the other hand, Fourier transform infrared spectroscopy and scanning electron microscopy analyses revealed the formation of major peaks of components such as hydroxyl and carboxylic acids. The same optimum treatment conditions (adsorbent dose of 2.47 g/L, initial pH 6.08, and treatment time of 60 min) managed to remove low initial fluoride concentrations of 3.67 and 4.33 mg/L from real groundwater by 72.84% and 70.37%, respectively. The modified adsorbent prepared in this study successfully treat the low fluoride concentration to a level recommended by WHO for drinking water.     

Adsorption Efficiency of Polyaspartate-Montmorillonite Composite Towards the Removal of Pb(II) and Cd(II) from Aqueous Solution

The selective modification of sodium montmorillonite (Na⁺-Mt) surface with polyionene followed by poly (succinimde-co-aspartate) has been considered. Na⁺-Mt was allowed to react with well characterized polyionene in two fold excess. The resulting polyionene/Mt (IC) was further modified with poly (succinimide-co-aspartate) through an ion exchange process. The obtained polyaspartate/Mt (IPS) composite was characterized by elemental analysis, X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and BET surface analyzer. The adsorption efficiency of IPS composite was investigated for the removal of Pb(II) and Cd(II) from aqueous solution under different experimental conditions including initial metal ions concentration, temperature and single and binary mixture systems of metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich models. Langmuir model reveals that the monolayer adsorption capacity of IPS was 92.59 and 67.57 mg/g for Pb(II) and Cd(II), respectively. The modification of parent Na⁺-Mt enhanced their adsorption capacity by about 87.91 and 29.84% for Pb(II) and Cd(II), respectively, due to inclusion of extra active sites of polyaspartate. The mean sorption energy, E calculated from Dubinin–Radushkevich isotherm were 2.75 and 1.98 kJ/mol for the adsorption of Pb(II) and Cd(II), respectively, indicating physical adsorption process. Also, The thermodynamic parameters were calculated and indicated that the adsorption was spontaneous and exothermic process. The mechanism of cation exchange and complexation of metal ions was suggested. IPS composite has a considerable potential for the removal of heavy metal ions from aqueous solution and wastewater stream.     

聚乙烯亚胺改性UiO-66-NH2对水中U(Ⅵ)的吸附

采用聚乙烯亚胺(PEI)改性氨基化锆基金属有机骨架材料(UiO-66-NH₂)制备了UiO-66-NH₂/PEI,利用XRD、SEM和FTIR对产物进行了表征,并将其用于吸附水中的U(Ⅵ)。考察了UiO-66-NH₂/PEI吸附U(Ⅵ)的影响因素,并研究了吸附动力学和等温线。实验结果表明:UiO-66-NH₂/PEI对U(Ⅵ)具有良好的吸附效果,PEI与UiO-66-NH₂质量比为30%、溶液pH为6、吸附剂投加量为80 mg/L、吸附时间为120 min、初始U(Ⅵ)质量浓度为10 mg/L时,UiO-66-NH₂/PEI对U(Ⅵ)的去除率达98.2%(303 K下);UiO-66-NH₂/30%PEI对U(Ⅵ)的吸附在60 min内达到平衡,吸附过程符合准二级动力学模型和Langmuir模型,最大吸附量达452.49 mg/g。     

Biosorption potential and kinetic studies of vegetable waste mixture for the removal of Nickel(II)

Biosorption potential of new low cost biosorbent prepared from vegetable waste, composed of 1:1 mixture of potato and carrot peels for the removal of Ni(II) from aqueous solution was determined. The residual metallic ion concentrations were determined using an atomic absorption spectrophotometric technique (AAS). Batch experiments were conducted to optimize parameters such as initial pH, temperature, contact time, initial metal ion concentration and biosorbent dose and the results showed that maximum adsorption of Nickel (79.32 %) occurs when the contents were stirred for 75 min with 3.0 g of biosorbent at 35 °C and pH 4. Kinetic studies of the reaction revealed that it follows a pseudo-second order reaction. The experimental results were analyzed in terms of Langmuir and Freundlich isotherms. The Langmuir isotherm model fits well to data of Ni(II) biosorption by the prepared biomass as compared to the model of Freundlich. Both neat and Ni loaded biosorbent samples were analyzed by AAS using a dry ashing process in a furnace and also by use of a FT-IR spectrophotometer and an X-Ray florescence spectrometer in order to confirm the biosorption of Ni(II) and the results have revealed that a significant amount of Ni is present in the spent biosorbent.     

多孔黏土异构材料对气态萘的吸附

以膨润土为基质,添加表面活性剂和助表面活性剂,制备了多孔黏土异构材料(PCHs),采用SEM和BET技术进行了表征,并将其用于气态萘的吸附。考察了吸附效果的影响因素,并探讨了吸附机理。表征结果显示,PCHs具有较大的比表面积,孔径分布均匀,兼具微孔和中孔结构。实验结果表明:当吸附温度为30℃、初始萘质量浓度为560 mg/m3、相对湿度为0时,PCHs对萘的平衡吸附量达370 mg/g,远高于膨润土和有机膨润土;吸附为放热过程,温度越高平衡吸附量越低;平衡吸附量随初始萘质量浓度的增加呈非线性增长;水蒸气的存在导致萘的平衡吸附量减小;萘在PCHs上的吸附机理主要为表面物理吸附和有机质的分配作用。     

Application of ameliorated wood pulp to recover Cd(II), Pb(II), and Ni(II) from e-waste

In this study, dl-malic acid and hydrogen peroxide were used as leaching agents to remove metals from e-waste (printed-circuit boards) and itaconic acid-grafted poly(vinyl alcohol)-encapsulated wood pulp (IA-g-PVA-en-WP) to uptake metals from leachate with high proficiency [11.63 mg g^?1; 93.03 % for Cd(II), 11.90 mg g^?1; 95.18 % for Pb(II), and 12.14 mg g^?1; 97.08 % for Ni(II)]. Metals were recovered from the loaded biosorbent by desorption studies. The standard analytical techniques, such as elemental analysis, Fourier-transform-infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and thermogravimetric analysis, were used to characterize the recovering agent (biosorbent). At equilibrium, the metal uptake data were fitted to Langmuir and D–R isotherms (R ² > 0.99) significantly, revealing, the homogeneous distribution of active sites on biosorbent’s backbone. The possible mechanism appeared to be ion exchanges of metal ions with H⁺ together with binding over functionalities (COO^?). Dimensionless equilibrium parameter (R _L) showed the favourability of metal uptake at lower concentration, while mean adsorption energy (E) certified the physical binding of metal on functionalities which was further confirmed by sticking probability and activation energy parameters. Reusability studies were also conducted to state the performance of biosorbent.     

磁性纳米γ-Fe2O3/SiO2去除水中亚甲基蓝

以纳米γ-Fe₂O₃为磁性介质制备了磁性纳米γ-Fe₂O₃/SiO₂，并将其用于水中亚甲基蓝的吸附。表征结果显示：制备的γ-Fe₂O₃/SiO₂呈不规则核壳结构，平均粒径为38 nm，比表面积为74.35 m²/g，比饱和磁化强度为55 A·m²/kg。实验结果表明：γ-Fe₂O₃/SiO₂对亚甲基蓝的吸附适宜在中碱性条件下进行，4 h即可达吸附平衡;在初始亚甲基蓝质量浓度为180 mg/L、γ-Fe₂O₃/SiO₂加入量为2 g/L、初始溶液pH为7.0、吸附温度为298 K的条件下，吸附量最高为25.4 mg/g;共存金属离子会降低吸附效率，而少量的腐殖酸则会促进吸附;吸附过程符合准二级动力学方程，颗粒内扩散不是唯一的控速步骤;等温吸附满足Langmuir模型，该吸附是一个物理吸附过程;用乙醇洗涤的γ-Fe₂O₃/SiO₂重复使用4次时仍能保持约80%的原吸附量。     

Adsorptive Separation of Lysozyme from Aqueous Solutions Using Sulphonyl and Carboxyl Functionalized Stearyl Alcohol Grafted Epichlorohydrin

In the present work ability of the two novel adsorbents, sulphonyl and carboxyl functionalized stearyl alcohol-grafted epichlorohydrin, SA-g-E-SO₃H, SA-g-E-COOH; to remove lysozyme (LYZ) from aqueous solution was assessed. The adsorbent characterization was done using FTIR, XRD, SEM and TGA analyses. The adsorption efficiency was influenced by solution pH and the optimum operating pH was found to be 4.0 for SA-g-E-SO₃H and 5.0 for SA-g-E-COOH and their adsorption efficiency was evaluated using the various isotherm and kinetics models. The Sips isotherm model and pseudo-second-order kinetic model were found to be the best for describing the equilibrium and kinetic behaviors of the adsorption process. Batch adsorption/desorption studies in acidic medium, for over six cycles showed excellent regeneration capability of the adsorbents and could lead to the development of viable and promising technology for the adsorptive recovery of LYZ from aqueous solutions. The efficiency of the adsorbents for the LYZ adsorption was verified using egg white. The result obtained from this study revealed that adsorption ability of 25 mg of SA-g-E-COOH is 98.4 % which is more than that of SA-g-E-SO₃H (96.2 %). The efficiency of SA-g-E-SO₃H to remove LYZ from aqueous solution was found to be higher compared to SA-g-E-COOH.     

Biosorptive removal of Pb(II) and Cu(II) from wastewater using activated carbon from cassava peels

The ability of activated carbon from cassava peels to remove heavy metals like Cu(II) and Pb(II) from hospital wastewater was investigated. The study showed that a pH of 8 was the best for the sorption of both metal ions onto the biosorbent. The time-dependent experiments for the metal ions showed that the binding of the metal ions to the biomass was rapid and occurred within 20–120 min. Sorption efficiency increased with a rise in adsorbent dosage. It increased from 12 to 73 % for Pb(II) and 26 to 79 % for Cu(II) when the adsorbent dose increased from 2 to 12 g. An increase in temperature led to an increase in sorption for both metal ions. The Langmuir model showed that the biomass has a higher sorption capacity for Cu(II) than Pb(II), with q _m = 5.80 mg g^?1 for Pb(II) and 8.00 mg g^?1 for Cu(II). The Freundlich isotherm K _f was 1.4 for Pb(II) and 1.8 for Cu(II), indicating a preferential sorption of Cu(II) onto the biosorbent. Adsorption capacity was found to decrease with an increase in particle sizes. Sorption occurred by physical mechanisms and was mainly controlled by intraparticle diffusion.     

海藻酸钠-聚乙烯醇-聚乙二醇复合膜的制备及其对Cu2+的吸附

采用聚乙烯醇（PVA）、聚乙二醇（PEG）对海藻酸钠（SA）进行改性，制备了一种新型高效SA-PVA-PEG复合膜。研究了该复合膜对Cu²⁺的吸附效果。用IR和SEM等手段对复合膜进行了表征。表征结果显示，复合膜内部存在孔状结构，有利于吸附Cu²⁺。实验结果表明：在初始Cu²⁺质量浓度50 mg/L、复合膜加入量1 g/L、废水pH=5、吸附温度30 ℃、吸附时间60 min的最佳条件下，吸附率最高可达90.1%，吸附量达25.3 mg/g；复合膜吸附Cu²⁺的动力学过程可用二级动力学方程和Elovice方程进行拟合，吸附过程符合Langmuir单层吸附理论。采用浓度为1 mol/L的HCl溶液对吸附后的复合膜进行解吸，当解吸时间为2 min时，解吸率可达80.0%。     

Experimental and Modeling Studies for the Removal of Crystal Violet Dye from Aqueous Solutions using Eco-friendly <Emphasis Type="Italic">Gracilaria corticata</Emphasis> Seaweed Activated Carbon/Zn/Alginate Polymeric Composite Beads

This research article describes, an eco-friendly activated carbon prepared from the Gracilaria corticata seaweeds which was employed for the preparation of biodegradable polymeric beads for the efficient removal of crystal violet dye in an aqueous solution. The presence of chemical functional groups in the adsorbent material was detected using FTIR spectroscopy. The morphology and physical phases of the adsorbent materials were analyzed using SEM and XRD studies respectively. Batch mode dye adsorption behavior of the activated carbon/Zn/alginate polymeric beads was investigated as a function of dosage, solution pH, contact time, initial dye concentration and temperature. Maximum dye removal was observed at a pH of 5.0, 1 g of adsorbent dosage with 60 mg/L dye concentration, 50 min of contact time and at 30 °C. The equilibrium modeling studies were analyzed with Freundlich and Langmuir adsorption isotherms and the adsorption dynamics was predicted with Lagergren’s pseudo-first order, pseudo-second order equations and intra particle diffusion models. The process of dye removal followed a pseudo second-order kinetics rather than pseudo first order. The thermodynamic parameters like standard Gibbs free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined and the results imply that the adsorption process was spontaneous, endothermic and increases the randomness between the adsorbent and adsorbate. The results from the experimental and correlation data reveal that the Gracilaria corticata activated carbon/Zn/alginate polymeric beads have proved to be an excellent adsorbent material for the removal of CV dye.     

氧化石墨烯负载纳米零价铁的制备及其对亚甲基蓝的吸附

采用液相还原法制备氧化石墨烯负载纳米零价铁吸附剂(Fe0/GO),并用于吸附去除溶液中的亚甲基蓝(MB)。考察了溶液p H、吸附温度、吸附时间、初始MB质量浓度对Fe0/GO吸附MB的影响。SEM等表征结果显示:Fe0以球形或短链形负载在GO上,增加了材料的反应活性位点;Fe0/GO的比表面积为158.32 m2/g,等电点为3。实验结果表明:在溶液p H为6、吸附时间5 h、吸附温度25℃的最佳条件下,加入400 mg/L的Fe0/GO,处理初始MB质量浓度为160 mg/L的MB溶液,MB去除率为89.26%,吸附量为125.5 mg/g;Langmuir等温吸附方程和Frenudlich等温吸附方程均能较好地描述Fe0/GO对MB的吸附过程;Fe0/GO对MB的吸附行为遵循准二级动力学方程;计算得出吸附温度为25℃、初始MB质量浓度为160 mg/L时的饱和吸附量为201.2 mg/g,平衡吸附量为124.3 mg/g。