Spatial distribution and source apportionment of PCBs in sediments around İzmit industrial complexes, Turkey

The spatial distribution, degree of pollution and major sources of PCBs were evaluated in surficial sediments within the heavily urbanized and industrialized ?zmit Bay and its main freshwater inputs. ΣPCB concentrations range from 2.90 to 85.4ngg(-1) in marine sediments and from ND to 47.7ngg(-1) in freshwater sediments. Results suggest that high concentrations of ΣPCBs were localized around a chlor-alkali plant and an industry that handles bulk liquid, dry and drummed chemicals, and petroleum products in the Bay. Using a chemical mass balance receptor model (CMB), major sources of PCBs in the region were investigated. The CMB model identified Aroclor 1254 and 1260 to be the major PCB sources in marine sediments and the less chlorinated Aroclor 1248 and 1242 as the major PCB sources in freshwater sediments. The potential sources for the PCBs were briefly discussed in terms of their use in various industrial applications.     

Atmospheric PCB congeners across Chicago

We have measured PCBs in 184 air samples collected at 37 sites in the city of Chicago using an innovative system of high-volume air samplers mounted on two health clinic vans. Here we describe results of sampling conducted from November 2006 to November 2007. The samples were analyzed for all 209 PCB congeners using a gas chromatograph with tandem mass spectrometry (GC-MS/MS). The ΣPCBs (sum of 169 peaks) in Chicago ranged from 75 pg m(-3) to 5500 pg m(-3) and primarily varied as a function of temperature. The congener patterns are surprisingly similar throughout the city even though the temperature-corrected concentrations vary by more than an order of magnitude. The average profile resembles a mixture of Aroclor 1242 and Aroclor 1254, and includes many congeners that have been identified as being aryl hydrocarbon receptor (AhR) agonists (dioxin-like) and/or neurotoxins. The toxic equivalence (TEQ) and neurotoxic equivalence (NEQ) in air were calculated and investigated for their spatial distribution throughout the urban-industrial complex of Chicago. The NEQ concentrations are linearly correlated with ΣPCBs while the TEQ concentrations are not predictable. The findings of this study suggest that airborne PCBs in Chicago are widely present and elevated in residential communities; there are multiple sources rather than one or a few locations of very high emissions; the emission includes congeners associated with dioxin-like and neurotoxic effects and congeners associated with unidentified sources.     

PCB accumulation in osprey exposed to local sources in lake sediment

We examined the accumulation of PCBs in ospreys (Pandion haleaetus) that were exposed to local sediment sources. Eggs, chick plasma, and sediment samples were collected over a range of 14 km (0.2-14.2 km) from a PCB source in Sturgeon Lake, ON. Sum PCB concentrations declined in chick plasma (range 422.5-58.3 ng/g) as distance from the PCB source increased, but there was a poor relationship with sum PCBs in eggs. Both tissues indicated an Aroclor 1248/1254 source. Aroclor 1254 comprised an average of 66.9% of sum PCBs in chick plasma from Sturgeon Lake, but comprised only from 27.0 to 44.4% in plasma from other Great Lake colonies. Dietary differences among osprey colonies were not sufficient to explain the PCB patterns observed. There was weak evidence that the ability to metabolize PCBs may differ between juveniles and adults, based upon the PCB profile in eggs and chick plasma.     

Iron-mediated reactions of polychlorinated biphenyls in electrochemical peroxidation process (ECP)

A study was conducted to explore some of the basic processes of polychlorinated biphenyl (PCB) destruction by a new technology termed electrochemical peroxidation process (ECP). ECP represents an enhancement of the classic Fenton reaction (H2O2 + Fe2+) in which iron is electrochemically generated by steel electrodes. Focus was on the extent of adsorption of a mixture of Aroclor 1248 on steel electrodes in comparison to iron filings. Commercially available zero-valent iron filings rapidly adsorbed PCBs from an aqueous solution of Aroclor 1248. Within 4 h, all the PCBs were adsorbed at 1%, 5%, and 10% Fe0 (w/v) concentrations. Little difference in adsorption was found between acidic (2.3) and unamended solutions (pH 5.5), even though significant differences in iron oxidation state and Fe2+ concentrations were measured in solution. PCB adsorption also occurs on steel electrodes regardless of the pH or electric current applied (AC or DC), suggesting the combination of oxidizing (free radical-mediated reactions) and reducing (dechlorination reactions) iron-mediated degradation pathways may be possible. Extraction of the iron powder after 48 h of contact time yielded the progressive recovery of biphenyl with increasing Fe mass(from 0.4% to 3.5%) and changes of the PCB congener-specific pattern as a consequence of dechlorination. A variety of daughter congeners similar to those accumulated during anaerobic microbial dechlorination of Aroclor 1248 in contaminated sediments indicate preferential removal of meta- and para-chlorines.     

Isotope dilution analysis of polychlorinated biphenyls (PCBs) in transformer oil and global commercial PCB formulations by high resolution gas chromatography-high resolution mass spectrometry

Special polychlorinated biphenyls (PCBs) standards (native and isotope labeled) were analyzed by isotope dilution method using HRGC-HRMS. Multiple analysis of special PCBs standards by three different laboratories produced the relative response factors (RRFs) and relative standard deviations (RSDs %) was in the average of 0.979 and 3.86, respectively. Additionally, inter-laboratory analysis of various forms of transformer oil revealed the PCBs concentrations were in the following order; PCBs fortified transformer oil (940-1300 ng/g)>PCB polluted transformer oil (490-680 ng/g)>chemically degraded-transformer oil (480-490 ng/g) and PCBs free oil (ND-17 ng/g). Chemical degradation resulted in an order of magnitude decrease in the PCB concentrations. Specifically, higher chlorinated PCBs degraded into lower chlorinated PCBs. Also, composition of PCBs have been determined in PCB formulations from Japan (Kanechlor), Germany (Clophen), USA (Aroclor), Russia (Sovol) and Poland (Chlorofen). Major PCBs (24-PCB congeners) contributed 54-67%, 55-68%, 16-69%, 71% and 72% in Kanechlor, Clophen, Aroclor, Sovol and Chlorofen, respectively to total PCBs. The homologue pattern of Kanechlor, Aroclor and Clophen in technical fromulation was similar (e.g., Kanechlor-300 resembled to those of Clophen A-30 and Aroclor-1242). Furthermore, congener-specific distributions of major PCBs/dioxin-like PCBs and toxic equivalency quantities (TEQ) were calculated. Based on our tentative assumption calculations, cumulative production of five different technical PCB formulations, WHO-TEQ emission was estimated to be approximately 16.05 tons.     

Concentrations of dioxin-like PCB congeners in unweathered Aroclors by HRGC/HRMS using EPA Method 1668A

We have determined the congener compositions of nine commercial Aroclor products of polychlorinated biphenyls (PCBs) to the sub-part-per-million level using high-resolution gas chromatography combined with high-resolution mass spectrometry according to US Environmental Protection Agency (EPA) Method 1668A. These Aroclor composition data should allow improved characterization and risk assessment of PCB contamination at hazardous waste sites, particularly for dioxin-like PCB congeners. By combining the data on the concentrations of each dioxin-like congener with its World Health Organization toxicity equivalency factor, we have established dioxin toxic equivalent concentrations for each pure Aroclor product.     

Aroclor misidentification in environmental samples: how do we communicate more effectively between the laboratory and the data user?

Disposal of carbonless copy paper (CCP) paper sludge during the 1960s contaminated a site in the USA with PCBs. Despite historic records of CCP sludge disposal and absence of evidence of any other disposal, a dispute arose among the parties over the source of the PCBs. Aroclor 1242 is well documented as the PCB mixture used in CCP, yet Aroclors 1242, 1248, 1254, and 1260 were reported by the analytical laboratory. How could the PCBs at a single, small site be reported as four different Aroclors? Some claimed that there had to be at least four Aroclors source inputs to the site. Disposal of four different Aroclors at this site would simply defy logic and the historic record. Weathering of the mixtures is part of the story. A larger issue is the conflict between the intent of the USEPA 8082 method to determine the total PCB content in environmental samples to facilitate environmental cleanup and disposal decisions within a regulatory context versus the data users’ intent to identify the PCB sources. This inappropriate extension of the data leads to erroneous conclusions. To mitigate problems like this, laboratory analysis requests need to be matched to the intended data usage; conversely, the data must not be over-interpreted beyond the limits of the method. The PCB analysis community needs to develop a better articulation of the limits of Aroclor identification for the broader community that may naïvely assume that if the laboratory reports “Aroclor 1248,” then someone must have placed Aroclor 1248 at the site. After all, when a laboratory reports “lead” or “chloroform,” those identifications are never in question.     

Polychlorinated biphenyls in surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in East China Sea

The spatial distribution and source of polychlorinated biphenyls (PCBs) in 30 surface sediments of Yueqing Bay, Xiangshan Bay, and Sanmen Bay in Eastern China were analysed. Total concentrations of PCBs ranged from 9.33 to 19.60 ng g⁻¹ dry weight for all the sampling stations. The observed PCB levels were lower than those in areas of high urbanisation or contamination in the bay. Low-chlorinated PCBs, dominated by tri-PCB, were identified as the prevalent contaminate of surface sediments, and the top three PCB congeners were lighter chlorinated congeners (PCB 8, PCB 18 and PCB 28). These results were in agreement with the fact that tri-PCB compounds are the dominant contaminants in China. The result of the principal component analysis revealed that all samples were similar in composition to Aroclor 1242, suggesting they might originate from electrical capacitors and transformers. The levels of PCBs were significantly correlated with the total organic carbon in the sediments.     

Development of a new polyclonal antibody for the determination of polychlorinated biphenyls in indoor air by ic-ELISA

A new polyclonal antibody (pAb) was prepared and used for the determination of polychlorinated biphenyls (PCBs) in air samples to promote the application of immunoassay technology in the determination of PCBs. Three PCB congeners immunogen mixture was used to stimulate immune responses in rabbits. The specific pAb to PCBs was obtained and used to develop an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA). A standard curve for Aroclor 1248 was prepared using concentrations ranging from 0.1 to 100 μg L^?1. The average IC₅₀ value was 16.21 μg L^?1 and the limit of detection at 10 % inhibition (IC₉₀) was 0.069 μg L^?1. The entire procedure was then evaluated using spiked air samples. The recoveries of Aroclor 1248 at various spiking levels in the air samples ranged from 84 to 113 %, with relative standard deviations of 3 to 6 %. Under optimum conditions, the cross-reactivity profiles of the assays were obtained using three selected congeners, four Aroclor products, and other structurally related compounds of PCBs. The assays were found to be highly specific for PCB congeners and Aroclors 1248 and 1242. The air samples were then analyzed using gas chromatography coupled with high-resolution mass spectrometry to confirm the ic-ELISA results. The attained results demonstrated that the proposed method was an effective and inexpensive technique for the PCBs determination in air samples.     

Distribution patterns of nitrobenzenes and polychlorinated biphenyls in water, suspended particulate matter and sediment from mid- and down-stream of the Yellow River (China)

Samples of water, suspended particulate matter (SPM) and sediment were collected from mid- and down-stream of the Yellow River. The distribution and concentration of 10 nitroaromatic compounds and polychlorinated biphenyls (PCBs) were extensively studied. The total concentration of 10 nitrobenzenes (SigmaNBs) varied from 0.269 to 9.052 microg l(-1) in water, from 2.916 to 164.4 microg kg(-1) dry weight in SPM, and from 0.954 to 14.72 microg kg(-1) dry weight in sediment. PCBs associated with the sediments, measured as the summed responses of Aroclor 1242, 1248, 1254, 1260 (in comparison to those of a standard 1:1:1:1 mixture), were found to be in the range of non-detectable to 5.98 microg kg(-1). In the samples collected, various PCB congeners showed similar distribution characteristics with congeners containing 3-5 chlorine atoms accounting for more than 96.4% of total PCB. In most of the samples, PCB concentrations occurred in the order: TetraCB > TriCB > PentaCB. Levels of SigmaNBs in the Yellow River were relatively low in comparison with values reported from other river and marine systems, and PCB levels were comparatively low. Relative to the PCBs, SigmaNBs showed significantly more difference among the various stations, presumably due to the influence of different pollution sources. No obvious correlation was observed between the pollutant concentrations and either the TOC or the grain size of the sediments.     

Vertical fluxes and accumulation of PCBs in coastal sediments of the Río de la Plata estuary, Argentina

Settling particles and underlying sediments collected at 1, 2.5 and 4 km along offshore transects in the urbanized sector of the Río de la Plata were analyzed to evaluate the sources and accumulation of PCBs. Total PCB concentrations range from <0.1 to 100 ng g(-1) and include variability associated to North-South and offshore gradients reflecting the impact of coastal discharges. Highest concentrations were recorded in the industrialized Central area close to Buenos Aires (61+/-37 ng g(-1) at 1 km) relative to cleaner northern stations (3.6+/-2.2 ng g(-1)) and southward sites (37+/-2.8 ng g(-1)), affected by transport of particulate PCBs by coastal currents. Sediment traps deployed in the Central area revealed large depositional fluxes of total matter (361+/-124 gm(-2)day(-1)) and PCBs (26+/-19 microg m(-2)day(-1)) and high sedimentation rates (5.0+/-1.7 cm yr(-1)). Uniform PCB concentrations (66-89 ng g(-1)) down to 20 cm in sediment cores suggest continued PCB discharges during the last 4 years. PCB composition was dominated by hexa (43+/-6.4%), hepta (23+/-5.1%) and pentachlorobiphenyls (21+/-5.5%) with lower proportions tri-tetra (7.4+/-5.4%) and higher chlorinated congeners (5.1+/-3.3%). A consistent weathering pattern with loss of 3-5 chlorobiphenyls and enrichment in higher chlorinated PCBs corresponding to a shift from a 1:1 to a 1:3 1254:1260 Aroclor mixture, was observed offshore. A principal component analysis performed with the relative contribution of PCB congener classes confirmed the offshore weathering pattern indicating that transformer oils containing Aroclor 1254-1260 are the most probable sources. Sediment inventories, sediment trap fluxes and Fugacity II calculations indicate an accumulation approximately 500-800 kg PCB in superficial sediments of this coastal environment.     

Occurrence of polychlorinated biphenyls (PCBs) together with sediment properties in the surface sediments of the Bering Sea, Chukchi Sea and Canada Basin

The spatial distribution and potential source of polychlorinated biphenyls (PCBs) in surface sediments from Bering Sea, Chukchi Sea, and Canada Basin and the relationship between PCBs and sedimentary properties including grain size, water content, loss on ignition, total organic carbon, and black carbon were explored. ΣPCBs (the sum of the detected PCB congeners) concentrations fluctuated in the study area, ranging from 22-150, 60-640 and 24-600 pg g(-1) dry weight for the Bering Sea, Chukchi Sea, and Canada Basin. A similar homologue pattern was observed at different locations, with tri-chlorinated PCBs being the dominant homologue, implying that the PCBs came mainly from the atmospheric transportation and deposition and ocean current transportation. No apparent co-relationships between PCB concentrations and sediment properties were obtained, indicating that the distribution of PCBs was not only controlled by their source, but also by the multi-factors such as atmospheric transport and depositing, mixing, partitioning and sorption in the water column and sediments.     

Congener-specific egg contribution of polychlorinated biphenyls to nestlings in two passerine species

Quantifying polychlorinated biphenyl (PCB) residues in nestlings of avian species is a common method for assessing trophic transfer and risk at PCB-contaminated sites. The proportion of nestling PCB mass due to maternal transfer is often accounted for by subtracting total PCB mass in eggs from nestlings. However, variation in physicochemical properties and metabolism among congeners may lead to differences between egg contribution based on total PCBs and dioxin-like congeners. We examined congener-specific variation in contribution of PCBs from eggs to nestlings in tree swallows and European starlings. Egg contribution of total PCB mass was 14.3 and 16.2%, respectively, whereas contribution based on dioxin-like congeners was 14.8 and 13.6%, respectively. These data suggest that using total PCB mass in eggs to adjust estimates of PCB accumulation in nestlings may not reflect patterns for dioxin-like congeners, potentially over or under-estimating the risk of toxicity of PCBs.     

Polychlorinated biphenyls contamination in urban soil of Shanghai: level, compositional profiles and source identification

Surface soil samples taken from 55 sampling sites at the urban areas of Shanghai were collected and analyzed for the occurrence of 144 polychlorinated biphenyls (PCBs) by GC-μECD. The results showed that totally 74 PCB congeners were identified and the mean concentration of total PCBs was 3057 ng kg⁻¹ with a range of 232 to 11325 ng kg⁻¹. Compared with the related reports, the level of PCBs contamination in this study was approximately equal to the global background value in soils, but higher than Chinese background for rural and urban soils. According to the compositional profiles of PCBs homologues, a higher proportion of low chlorinated (from tri-CBs to hexa-CBs) was observed. The results indicated that PCB15 + 13, PCB18, PCB28, PCB104 + 47 and PCB153 were the most dominant congeners among the identified PCBs. Through homologues analysis, cluster analysis and principal component analysis (PCA), it was found that PCBs were stretched from mixed local sources, and appeared to be mostly originated by Aroclor 1260- and 1254-like mixtures as well as some samples influenced by Aroclor 1232 and 1242. The correlation analysis showed the relatively good correlation among the PCB homologues and soil total organic carbon (TOC), suggesting important influence of soil TOC on PCBs contamination in soil matrix in Shanghai region. The toxic equivalency (TEQ) concentrations of these six dioxin-like PCBs detected in urban soil samples range from 2.71 to 24.9 pg kg⁻¹-PCDDeq with a mean 8.18 pg kg⁻¹-PCDDeq.     

PCB dechlorination hotspots and reductive dehalogenase genes in sediments from a contaminated wastewater lagoon

Polychlorinated biphenyls (PCBs) are a class of persistent organic pollutants that are distributed worldwide. Although industrial PCB production has stopped, legacy contamination can be traced to several different commercial mixtures (e.g., Aroclors in the USA). Despite their persistence, PCBs are subject to naturally occurring biodegradation processes, although the microbes and enzymes involved are poorly understood. The biodegradation potential of PCB-contaminated sediments in a wastewater lagoon located in Virginia (USA) was studied. Total PCB concentrations in sediments ranged from 6.34 to 12,700 mg/kg. PCB congener profiles in sediment sample were similar to Aroclor 1248; however, PCB congener profiles at several locations showed evidence of dechlorination. The sediment microbial community structure varied among samples but was dominated by Proteobacteria and Firmicutes. The relative abundance of putative dechlorinating Chloroflexi (including Dehalococcoides sp.) was 0.01–0.19% among the sediment samples, with Dehalococcoides sp. representing 0.6–14.8% of this group. Other possible PCB dechlorinators present included the Clostridia and the Geobacteraceae. A PCR survey for potential PCB reductive dehalogenase genes (RDases) yielded 11 sequences related to RDase genes in PCB-respiring Dehalococcoides mccartyi strain CG5 and PCB-dechlorinating D. mccartyi strain CBDB1. This is the first study to retrieve potential PCB RDase genes from unenriched PCB-contaminated sediments.     

Records of polychlorinated biphenyls (PCBs) in sediments of four remote Chilean Andean Lakes

Sediment cores from four Chilean lakes along the Andes Chain (Chungará, Laja, Castor and Venus) were analysed in order to investigate PCB concentrations and distributions in sediment samples. Sediment cores were analysed for PCBs using gas chromatography (GC-ECD/MS) and radioisotopically dated using 210Pb. Organic carbon content (OC) and 210Pb fluxes were also measured. Results showed that sediment PCB concentrations (ngg(-1) d.w.) at Lake Chungará (1.2 +/- 1) in northern Chile, Laja (5 +/- 4) in central, and in Lake Castor (3.5 +/- 4) in southern Chile (the eastern side of the Andes Mountain) were lower than sediments collected from Lake Venus (64 +/- 30) located in southern Chile (the western side) which contained 15-fold higher concentrations of PCBs. The percentage (%) of organic carbon was variable and showed a high range of values in the sediment fluctuating from 2% (Lake Laja) to 22% (Lake Chungará). Analysis of 210Pb fluxes, presented a decrease trend following Lake Laja>Castor>Chungará with a positive correlation with rainfall at each site. Sedimentation rates in Lake Castor (1846 gm(-2)yr(-1)) were higher than at Chungará (748 gm(-2)yr(-1)) and Lake Laja (508 gm(-2)yr(-1)). Focusing factor (FF) is used as a tool to elucidate PCB input in the aquatic ecosystem. FF were lower (<1) for the shallower lakes (Lakes Chungará and Castor). This study provides background levels of PCBs at remote lakes in Chile. Differences in geographical characteristics (orographic effect) might play an important role in the arrival of PCBs, particularly into the southern lakes. PCB fluxes indicated deposition of PCBs in recent sediments is higher than in previous years with peaks of PCB between 1991 and 1998. The continuing increase of PCB inputs in remote Chilean lakes, could be associated with long range atmospheric transport (LRAT).     

Correlations between dioxin-like and indicators PCBs: Potential consequences for environmental studies involving fish or sediment

Among the numerous PCB congeners, most of the dioxin-like PCBs (DL-PCBs) need to be characterized by hyphenated techniques. It has been shown in several instances that these congeners are well related to the total PCB content in fish. We examined datasets collected mainly in France, on freshwater and marine fish and sediments. A statistical model linking DL- and indicator PCBs was developed for a dataset composed of freshwater fishes, and proved to predict well DL-PCBs from indicator PCBs in all other fish sets, including marine ones. Type II error rates remained low in almost all fish sets. A similar correlation was observed in sediments. Non-dioxin-like PCBs elicit various adverse effects and represent 95% of the total PCBs. A European guideline for them is needed; the correlation between DL- and indicator PCBs could help develop this standard in the future.     

Polychlorinated biphenyls (PCBs) in marine fishes from China: Levels, distribution and risk assessment

Muscle tissues of large yellow croakers (Pseudosciaena crocea) and sliver pomfret (Pampus argenteus) from nine coastal cities of East China including Dalian, Tianjin, Qingdao, Shanghai, Zhoushan, Wenzhou, Fuzhou, Quanzhou and Xiamen were analyzed for polychlorinated biphenyl (PCB) concentrations. Thirty-six PCB congeners were quantified in the fishes, of which 11 congeners were dioxin-like PCBs. The total PCB concentrations of the present study were at the low end of the global range, which may be related to the smaller usage and shorter consumption history of PCBs in China. PCBs 18, 29, 52, 66, 101, 104, 138, 153, 180 and 194 were the major constituents found in the fish samples. Regression analysis showed a strong positive correlation (R² = 0.800; p < 0.001) between total dioxin-like PCBs and total PCB concentrations, and that total PCB concentrations explain 80% of the variability in total dioxin-like PCB concentrations. Among the species investigated, significantly higher concentrations of total PCBs were found in croakers than in pomfrets, which may be attributed to their different feeding and living habits. No significant difference in total PCB concentrations among the cities was observed; principal component analysis (PCA) of PCB profiles indicated that PCB pollution came from similar sources in the sampling areas and that there may be other PCB sources in Dalian and Wenzhou. The calculated carcinogenic risks (CRs) from the two species based on a low consumption group and high consumption group were all greater than 10⁻⁶, suggesting that daily exposure to dioxin-like PCBs via fish consumption results in a lifetime cancer risk of greater than one in one million. In contrast, the hazard quotients (HQs) of noncancer risks were all less than unity.     

PCBQ: Computerized quantification of total PCB and congeners in environmental samples

Computerized methodologies for the quantification of total PCBs, PCB in Aroclor mixtures and individual PCB congeners in environmental samples are presented. The method for total PCBs is based on a multiple-linear regression analysis using data from capillary gas chromatography of Arocolor standards. PCB congeners were identified and their weight percentages determined in Aroclor mixtures by GC/MS. PCB congeners and total PCBs were accurately quantified in predetermined test data and environmental samples.     

Reductive dechlorination of polychlorinated biphenyls as affected by sediment characteristics

The effect of sediment sources on the selection of polychlorinated biphenyl (PCB) dechlorinating competence was investigated using sediments from two different locations, the Grasse River and Owasco Lake. These two sediments had a similar organic carbon content but different particle size distribution. The two PCB-free sediments were spiked with Aroclor 1248 and inoculated with microorganisms from the Reynolds and General Motors sites in the St. Lawrence River, which exhibited different dechlorination patterns. When each inoculum was serially transferred into fresh sediments four times (every 8-10 weeks), they still maintained the initial dechlorination patterns regardless, the source of sediments and the number of transfers, and dechlorination patterns of the two inocula in the same sediments did not converge. In a parallel approach, when the acclimated microorganisms from the Reynolds site were inoculated into fresh sediments from both sources as well as sediments enriched with organic carbon (2%, w/v), the dechlorination pattern remained unchanged after a 40-week incubation. These results suggest that the sediment characteristics or organic carbon content did not play a role in the selection of dechlorinating populations.