Occupational electrical injuries in the United States, 1992-1998, and recommendations for safety research

PROBLEM: CFOI and SOII data show that 2,287 U.S. workers died and 32,807 workers sustained days away from work due to electrical shock or electrical burn injuries between 1992 and 1998. METHOD: The narrative, work activity, job title, source of injury, location, and industry for each fatal electrical accident were examined. A primary causal factor was identified for each fatality. RESULTS: Electrical fatalities were categorized into five major groups. Overall, 44% of electrical fatalities occurred in the construction industry. Contact with overhead power lines caused 41% of all electrical fatalities. DISCUSSION: Electrical shock caused 99% of fatal and 62% of nonfatal electrical accidents. Comprising about 7% of the U.S. workforce, construction workers sustain 44% of electrical fatalities. Power line contact by mobile equipment occurs in many industries and should be the subject of focused research. Other problem areas are identified and opportunities for research are proposed. IMPACT ON INDUSTRY: Improvements in electrical safety in one industry often have application in other industries.     

Worker-fatigue contributing to workplace incidents in New Zealand Forestry

ProblemReports of incidents in dangerous work environments can be analysed to identify common hazards, in turn aiding in the prevention of future accidents. Whilst studies exist that do this, most focus on causes that involve physical risks. In this paper we propose an alternative approach, and illustrate causes of forestry incidents from the perspective of worker-failure and fatigue. Method This paper outlines the analysis of eight years’ worth of New Zealand forestry incident data, with a focus on the cause of, and time that, incidents occur. Results This has resulted in two main findings. First, 70% of incidents can be attributed, at least in part, to worker-failures. Second, 78% of worker-failure based causes show indications of fatigue. This indicates that a significant number of forestry incidents are caused by worker-fatigue. Finally, this dataset showed inconsistencies in data quality, similar to those that exist in other datasets. This did not affect our analysis. However, these types of errors have the potential to affect the data quality in the national reporting system. Impact on industry The results from this study will be used in a larger project on detecting fatigue in forestry workers for injury and incident prevention. It is also our hope that other researchers may find these results of interest for further fatigue prevention research in hazardous industries.     

Field data: a study on trend and prediction of fatal traffic injuries prevalence in Shanghai

OBJECTIVE: The main objectives of the study are to analyze fatal traffic-injury trends in 1987-2003 in Shanghai and predict its prevalence in near future and provide scientific data for the local governmental decision on developing practical working methods on traffic-injury prevention and control. METHODS: In this study, epidemiological method and Grey dynamic model GM (1,1) were introduced to analyze and forecast traffic-injury mortality rates respectively. RESULTS: There was an apparent increasing trend of traffic-related injuries in Shanghai from 1987 to 2003 with the rate of growth in motorization. The average rates of annual increase are 3.59% in fatalities (from 7.78 per 100,000 population to 14.18 per 100,000 population) during the period. Pedestrians were the most common type of victims (29.6%), followed by bicyclists (25.1%), and motorcyclists (24.1%). Males accounted for the majority of all victims, over 69%. The population of high-school and lower high-school education level represented 66.4% victims of total road-traffic injuries. And if no special factors effect its development, the traffic fatalities would be up to 17.84 per 100,000 population in 2010, when calculating from equations we found and validated Y(t) = 359.90 x e0.027(t-1)-352.13, (t = 1, 2, ..., N) for Shanghai. CONCLUSION: Our data indicate the risk of fatal traffic injuries has increased in recent years and will go on growing in the near future in Shanghai. The findings showed that Grey dynamic model GM (1,1) is eligible on the prediction and can be a tool for injuries forecasting, implementing effective policies, programs, and interventions for reducing traffic injuries in the big cities.     

Traumatic work-related fatalities in forestry and sawmill workers in Australia

Work-related traumatic forestry and sawmill fatalities were studied as part of a larger study of all work-related traumatic fatalities in Australia from 1982 to 1984. Data on 79 cases were obtained from inspection of coroners' files. The fatality incidence per 100,000 person-years was extremely high for loggers (396), and high for forest service workers (52) and workers employed in sawmills (30), compared to the entire Australian workforce (8.1). Felling/trimming trees, traffic-related activities and operating heavy machinery (forestry workers) and loading/unloading logs and operating bench saws (sawmill workers) were the most common tasks being performed at the time of the fatal injury. Being struck by a falling tree, often one that had been disturbed by the tree being felled, was the most common mechanism of fatal injury. Isolation, poor work practice, errors of judgement, and equipment problems were the most common contributing factors to the fatal incidents. Emphasis on correct work practice and training (especially in felling), equipment maintenance, and availability of communication and medical retrieval in isolated areas are recommended.     

Occupational fatalities due to electrocutions in the construction industry

Introduction

Occupational fatalities due to contact with electricity account for approximately 9% of all deaths in the construction industry and is the fourth leading cause of death in this industry.

Method

Differences in the proportions of electrocutions in the construction industry are significantly different from other industries based upon the age of the worker and the source of the electricity.

Results

This study found that, in the construction industry, the proportion of occupational fatalities due to contact with electric current is significantly higher for workers in the 16 to 19 years old age group. Contact with overhead power lines occurred more frequently with younger workers, while contact with electric wiring, transformers, and related equipment was found to occur more frequently with older workers. The proportion of fatalities due to this event was also found to account for a significantly greater proportion of fatalities in the construction industry overall.

Impact on industry

The proportions of electrocution fatalities in the construction industry were found to be significantly higher for younger workers when compared to all other industries. Focusing prevention measures toward younger workers who work near overhead power lines could have a significant impact upon death rates. For older workers, the focus should be on those who work on or near transformers, electrical wiring, and components. Across the construction industry, implementation of effective lockout-tagout programs, and verification of energy isolation, can prevent approximately 125 fatalities per year in the construction industry.     

Field data: distributions and costs of road-traffic fatalities in South Africa

BACKGROUND: Road-traffic crashes and fatalities constitute major social and economic issues in South Africa. They are a major cause of morbidity and mortality comparable to HIV/AIDS, homicides, and some chronic diseases. METHODS: Road-traffic accident data for the year 2003 obtained from the Department of Transport, Pretoria, South Africa were used for this study. The valuation of the costs of road-traffic crashes and fatalities in South Africa is based on the gross output or human capital approach. RESULTS: 10,197 fatal road crashes and 12,353 fatalities were reported during the study period. More than 50% of the fatal road crashes and fatalities occurred in only three out of 11 provinces. The Northern Cape, which is the least populated province, had the highest fatal road crashes per 100,000 population and fatalities per 100,000 population. The number of road-traffic fatalities in the rural areas was 2.7 times that in the urban areas. The total costs of the road-traffic fatalities which was about R 8 billion (>US$ 1 billion) is about 0.6% of the country's nominal GDP for 2003. 60% of the cases and costs of road-traffic fatalities involved persons aged 20-39 years, although this age group is only 27% of the country's population. The rural areas accounted for 73% and the urban areas 27% of the total costs of fatal road-traffic crashes. CONCLUSION: Those living in the rural areas of the South African society and those aged 20-49 years constitute high-risk groups of road-traffic crashes and fatalities. They are also responsible for most of the attendant costs of fatal crashes and fatalities in the country.     

Assessing disabling and non-disabling injuries and illnesses using accepted workers compensation claims data to prioritize industries of high risk for Oregon young workers

Introduction: Young workers are especially vulnerable to occupational injuries and illnesses. There is a continued need to investigate injury burden among young workers across demographics and industry to inform targeted interventions. Workers compensation (WC) claims are important for quantifying work-related injuries and illnesses, however published studies have focused on disabling claims. This study extended previous research on Oregon young workers by including the most recent WC claims data to identify patterns of injury and high risk industries. Methods: We obtained all accepted disabling claims (N = 13,360) and a significant portion of non-disabling claims (N = 24,660) on workers aged 24 years and under from 2013 to 2018. Claim count, rate and cost were calculated by year, age, gender, industry, and injury type. A prevention index (PI) method was used to rank industries in order to inform prevention efforts. Results: Average annual disabling and non-disabling claim rates were 111.6 and 401.3 per 10,000 young workers. Workers aged 19–21 (disabling: 119.0 per 10,000 and non-disabling: 429.3) and 22–24 years (115.7 and 396.4) and male workers (145.3 and 509.0) had higher claim rates than workers aged 14–18 (80.6 and 297.0) and female workers (79.8 and 282.9). The most frequent injury types were “struck by/against” (35.6%) and “work-related musculoskeletal disorders (WMSDs)” (19.5%). High risk industries included agriculture, construction, and manufacturing for both genders combined. For female young workers, the highest risk industry was healthcare. Conclusions: This study demonstrated the added value of non-disabling WC claims data. Using both disabling and non-disabling data and PI method, agriculture, construction, manufacturing and healthcare industries were identified as priority workplaces to prevent common and costly injuries among Oregon young workers. Practical Applications: While the industries identified are considered hazardous for all workers, findings in this study can guide targeted research and prevention efforts specific to young workers.     

Injuries in special transportation services for elderly and disabled--a multi-methodology approach to estimate incidence and societal costs

OBJECTIVE: Previous research has shown that elderly and disabled travelers using Special Transportation Services (STS) are injured without being involved in a vehicle crash. In order to estimate the true costs for these vehicle-related injuries, the focus needs to be adjusted towards an incident/traveler-oriented perspective. The aim of the project was thus to utilize such a perspective, in order to make a best estimation of the true costs for injury incidents, related to STS in Sweden. METHODS: In order to address the chosen perspective, a mixed-method approach was used, involving quantitative as well as qualitative research methods applied on four different sets of data, the hospital-based material (n=32), two sets of STS material (n=127), and interview-based material (n=1,000). RESULTS: The results showed that the injury incidence rate in STS is considerable, i.e., 3.2 per 100,000 trips (ranging from 1.5-1.9 in STS taxis and 3.6-5.6 in STS special vehicles). However, this high incidence rate is not due to road traffic crashes, but to non-collision injury incidents involving elderly and frail passengers, easily sustaining injuries from minor to moderate external violence. Typically, this violence is affecting an older female STS user, while entering and exiting the vehicle. The true costs were estimated to be $35 million per annum or $2.6 per trip. CONCLUSION: Future injury prevention measures should thus focus on safety in entering and exiting procedures.     

Communicating costs and benefits of the chemical industry and chemical technology to society

Risk Communication is increasingly important to the chemical and manufacturing industries in the wake of a wave of major incidents in recent years. However, risk communication strategies as they are currently implemented tend to place the chemical industry on the defensive. Renewed attempts should be made to place the life-saving benefits of the chemical industry back in the public eye and counter-balance the popular political view that the chemical industry is often responsible for loss of life. In truth, while the chemical industry suffers on the job fatalities like many industries, the frequency is much less than many common industries and the chemical industry provides benefits to society that ultimately save far more lives.     

Analysis of fatalities and injuries involving mining equipment

INTRODUCTION: Despite significant reductions, the number of injuries and fatalities in mining remains high. A persistent area of concern continues to be equipment-related incidents. METHOD: Mine Safety and Health Administration (MSHA) and Current Population Survey (CPS) data were used to examine equipment-related injuries over the period 1995-2004. Incidents were reviewed to determine which types of mining equipment were most often involved and to identify and characterize trends. RESULTS: Non-powered hand tools was the equipment category most often involved with non-fatal injuries while off-road ore haulage was the most common source of fatalities. SUMMARY: Younger employees had an elevated risk of injury while workers >55 years had an elevated risk for fatality. A large majority of incidents involve workers with <5 years experience. IMPACT ON INDUSTRY: Results should increase hazard awareness and enable mine management to select and prioritize problem areas and safety system weaknesses in both underground and surface mining.     

Fatal occupational injuries in Jordan during the period 1980 through 1993

All fatal occupational injuries compensated by the Social Security Corporation (SSC) in Jordan during the period 1980–1993 were studied. Variables considered in the analysis included gender, age, nationality, occupation, salary, cause of injury, body part injured and cause of death. The overall fatality rate, of the 705 cases reviewed, was 25.5/100,000/year. The majority (98%) of fatalities were males. The risk of fatal injuries increased with age. Workers over 55 years, had the highest annual fatality rate (37.8). Immigrant workers had a higher fatality rate (32.26) than Jordanians (23.95). Unskilled workers constituted 58.3% of decedents and professionals had the highest fatality rate (52.9). Transportation sector had the highest fatality rate (122.4) followed by construction (50.6). Over the study period, fatality rates tended to decrease significantly in manufacturing, construction and trade economic sectors while no such trend was established by transportation, agriculture and services sectors. The leading causes of fatal injuries were motor-vehicle related accidents (63.0%) and fall of persons (11.1%). Head was the body part most injured and was involved in 46.6% of all deaths. Haemorrhage was the main reported cause of death (24.5%). It is concluded that intervention measures targeting specific occupations (transportation and construction) and causes of fatalities such as motor-vehicle incidents are needed.     

Workers’ compensation claim counts and rates by injury event/exposure among state-insured private employers in Ohio, 2007–2017

Introduction: This study analyzed workers’ compensation (WC) claims among private employers insured by the Ohio state-based WC carrier to identify high-risk industries by detailed cause of injury. Methods: A machine learning algorithm was used to code each claim by U.S. Bureau of Labor Statistics (BLS) event/exposure. The codes assigned to lost-time (LT) claims with lower algorithm probabilities of accurate classification or those LT claims with high costs were manually reviewed. WC data were linked with the state’s unemployment insurance (UI) data to identify the employer’s industry and number of employees. BLS data on hours worked per employee were used to estimate full-time equivalents (FTE) and calculate rates of WC claims per 100 FTE. Results: 140,780 LT claims and 633,373 medical-only claims were analyzed. Although counts and rates of LT WC claims declined from 2007 to 2017, the shares of leading LT injury event/exposures remained largely unchanged. LT claims due to Overexertion and Bodily Reaction (33.0%) were most common, followed by Falls, Slips, and Trips (31.4%), Contact with Objects and Equipment (22.5%), Transportation Incidents (7.0%), Exposure to Harmful Substances or Environments (2.8%), Violence and Other Injuries by Persons or Animals (2.5%), and Fires and Explosions (0.4%). These findings are consistent with other reported data. The proportions of injury event/exposures varied by industry, and high-risk industries were identified. Conclusions: Injuries have been reduced, but prevention challenges remain in certain industries. Available evidence on intervention effectiveness was summarized and mapped to the analysis results to demonstrate how the results can guide prevention efforts. Practical Applications: Employers, safety/health practitioners, researchers, WC insurers, and bureaus can use these data and machine learning methods to understand industry differences in the level and mix of risks, as well as industry trends, and to tailor safety, health, and disability prevention services and research.     

Global process safety incidents in the pharmaceutical industry

The objective of this research is to analyse global process safety incidents within the pharmaceutical industry in terms of their consequences and factors contributing to the incidents. There were 73 process safety incidents leading to 108 fatalities found between 1985 and 2019. Trends between the number of incidents, number of fatalities, location, and contributing factors were identified and summarized. The most reported fatalities occurred in 2018 & 2019. 83% of fatalities occurred in China and India. Explosions were associated with 71% of incidents, which resulted in 89% of fatalities. For most of the international incidents, incident investigations were not available and thus insufficient details were available to determine the causes. Contributing factors were available or estimated from available data for about half of the incidents, with the following most common: hazard awareness & identification; operating procedures; design; safeguards, controls & layers of protection; safety culture; and preventive maintenance. These findings can be used as a basis to improve process safety performance in the pharmaceutical industry.     

Fatal and serious injuries related to vulnerable road users in Canada

IntroductionThe goals of this study were to analyze possible trends of fatal and serious injuries related to vulnerable road users in Canada (pedestrians, cyclists and motorcyclists) from 1990 to 2012 and the role of alcohol and drugs in these cases. Drugs have rarely been documented with respect to vulnerable road users.MethodThe Traffic Injury Research Foundation's National Fatality and Serious Injury Databases and the Public Health Agency of Canada's Canadian Hospitals Injury Reporting and Prevention Program databases were used. Numbers and rates of fatalities and serious injuries among vulnerable road users were analyzed and regression models were used to assess changes over time.ResultsThe analyses show that while the absolute number of fatalities and the rate per 100,000 population among vulnerable road users may be decreasing, no such trends are apparent when looking at the proportions of these road user fatalities out of all motor-vehicle fatalities. The trend for the proportion of motorcyclist fatalities is significantly increasing (coef. = 0.16, p < 0.001). The elderly (76 years or older) are overrepresented among pedestrian fatalities, and serious injuries (they represent 18.5% of all pedestrian fatalities but only 5.8% of the population), while those 15 years or younger are overrepresented among cyclists (they represent 23.3% of cyclist fatalities but 19.5% of the population), and those 16 to 25 years old are overrepresented among motorcyclists (27.2% of motorcyclists fatalities and 13.6% of population). Alcohol and drug use among fatally injured vulnerable road users were significant problems, especially among pedestrians. Among fatally injured pedestrians tested for alcohol and drugs, 39.7% and 43.4% tested positive, respectively.ConclusionsWith the promotion of walking and cycling as forms of exercise and the popularity of motorcycling, the safety of vulnerable road users is an important issue. The results corroborate previous research and extend our understanding about the influence of alcohol and drugs in vulnerable road user injuries.Practical applicationsThese findings can help better inform prevention and mitigation initiatives for vulnerable road users.     

Comparison of two fatal occupational injury surveillance systems in the United States

INTRODUCTION: Using different methods, two national systems compile fatal occupational injury data in the United States: the National Institute for Occupational Safety and Health (NIOSH) National Traumatic Occupational Fatalities (NTOF) surveillance system, and the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries (CFOI). The NTOF uses only death certificates, while CFOI uses multiple sources for case ascertainment. METHODS: Through overall and case-by-case comparisons, this study compares these systems and evaluates counts for the nation and by state for worker and case characteristics. RESULTS: From 1992 through 1994, NTOF reported an average of 84% of the number of traumatic occupational fatalities reported in CFOI. This percentage changed somewhat when a case-by-case comparison was conducted--88% of the NTOF cases were matched directly to the CFOI cases. Although CFOI captured a larger number of fatalities annually, the additional fatalities did not follow a discernable pattern. IMPACT ON INDUSTRY: By understanding the distribution of fatalities, targeted efforts to reduce them will benefit all industries.     

Nighttime pedestrian fatalities: A comprehensive examination of infrastructure,user, vehicle,and situational factors

Introduction: Pedestrian fatalities in the United States increased 45.5% between 2009 and 2017. More than 85% of those additional pedestrian fatalities occurred at night. Method: We examine Fatality Analysis Reporting System (FARS) data for fatal pedestrian crashes that occurred in the dark between 2002 and 2017. Within-variable and before/after examinations of crashes in terms of infrastructure, user, vehicle, and situational characteristics are performed with one-way analysis of variance (ANOVA) and two-sample t-tests. We model changes in crash characteristic proportions between 2002–2009 and 2010–2017 using linear regressions and test for autocorrelation with Breusch-Godfrey tests. Results: The increase in fatal nighttime pedestrian crashes is most strongly correlated with infrastructure factors: non-intersection unmarked locations (saw 80.8% of additional fatalities); 40–45 mph roads (54.6%); five-lane roads (40.7%); urban (99.7%); and arterials (81.1%). In addition, SUVs were involved in 39.7% of additional fatalities, overrepresenting their share of the fleet. Increased pedestrian alcohol and drug involvement warrant further investigation. The age of pedestrians killed increased more (18.1%) than the national average (3.2%). Conclusions: By identifying factors related to the increase in nighttime pedestrian fatalities, this work constitutes a vital first step in making our streets safer for pedestrians. Practical Applications: More research is needed to understand the efficacy of different solutions, but this paper provides guidance for such future research. Engineering solutions such as road diets or traffic calming may be used to improve identified infrastructure issues by reducing vehicle speeds and road widths. Rethinking vehicle design, especially high front profiles, may improve vehicle issues. However, the problems giving rise to these pedestrian fatalities are likely a result of not only engineering issues but also interrelated social and political factors. Solutions may be correspondingly comprehensive, employing non-linear, systems-based approaches such as Safe Systems.     

Study of vehicle speeds on a major highway in Ghana: implication for monitoring and control

OBJECTIVE: Vehicular speeds have been identified to be at the core of road accident severity and frequency globally. Whereas speed control is a fundamental priority and the cornerstone of road safety in the developed world, the subject is at rudimentary stages in most developing countries thus making research into vehicle speeds in developing nations imperative. The main aim of the study was to establish two major speed parameters, namely the mean speed and dispersion, and their implications for more extensive and long-term speed monitoring in Ghana. METHODS: Research workers stationed themselves in a parked car and used a radar gun to unobtrusively measure the travelling speeds of 4,163 vehicles over two 24-hour periods at two separate sites on one of the main inter-urban roads (Accra-Kumasi). Both sites were settled areas with posted speed limits of 50 km/hr. RESULTS: Over 95% of vehicles travelled above the posted speed limit of 50 km/hr. Vehicles on an average travelled at 87 km/hr, (95% CI=87, 88). Variation in speeds was wide, with a standard deviation of 18 km/hr for all classes of vehicles, and with a range of 40 to 187 km/hr. The highest vehicular speed was associated with the private car (97.6+/-18.3 km/hr) followed by large buses (93.6+/-13.3 km/hr) and the least was with heavy trucks (73.8+/-12.9 km/hr). CONCLUSION: The excessive vehicular speeds coupled with the wide speed variations explain in part the high incidence of traffic crashes and fatalities on the Accra-Kumasi highway. An integrated speed monitoring and control program, and realigning the highway to by-pass small and medium settlements would be required as a long-term measure for the reduction of speed-related road traffic crashes, fatalities, and injuries in Ghana.     

An analysis of equipment-related fatal accidents in U.S. mining operations: 1995–2005

Despite significant reductions in mining fatalities, the number of these accidents remains high. Based on the number of fatalities per year, a persistent area of concern in mine safety continues to be equipment-related. The study was undertaken in order to more thoroughly characterize equipment-related mining fatalities and to perform an analysis of those that occurred over the last 11-years, from 1995 through 2005. Equipment-related fatalities obtained from the Mine Safety and Health Administration (MSHA) reports are used in this study. Results show that the proportion of total mine fatalities attributable to the equipment ranged from 37% to 88% per year. Among the MSHA equipment subcategories, the greatest proportion of fatalities is related to haul trucks (22.3%), belt conveyors (9.3%), front-end loaders (8.5%), and miscellaneous equipment (36.6%). The relationship between number of equipment-related fatalities and mining experience of the workforce was also examined. Study shows that workers with less than five years of appropriate mining experience constitute 44% of all fatalities that occurred during the period of 1995–2005.     

Aerial lift fall injuries: a surveillance and evaluation approach for targeting prevention activities

PROBLEM: Work on aerial lift platforms exposes workers to fall hazards. The objective of this study was to identify the most common injury scenarios and determine current research gaps for addressing fall incidents associated with aerial lifts. METHODS: Three databases were searched: Census of Fatal Occupational Injuries (CFOI), NIOSH Fatality Assessment and Control Evaluation (FACE) reports, and OSHA Incident Investigation Records. RESULTS: The majority of falls/collapses/tipovers were within the height-category of 10-29 feet. Tipovers comprised 44-46% of boom-lift falls and 56-59% of scissor-lift falls. Constructing and repairing activities were most commonly associated with fall/collapse/tipover incidents. DISCUSSION: CFOI and OSHA/FACE show convergent data, suggesting similar scenarios for aerial lift tipovers. IMPACT ON INDUSTRY: The analysis provides the aerial lift industry information to prioritize their efforts on aerial lift design.