Spectroscopic Analysis of NIR-Dye Sensitization in Bulk Heterojunction Polymer Solar Cells

The photovoltaic conversion efficiency for near-infrared (NIR) sunlight is improved successfully by dye sensitization of bulk heterojunction polymer solar cells, in which the active layer was prepared by a ternary blend of poly(3-hexylthiophene), a fullerene derivative (1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene), and an NIR dye, silicon phthalocyanine bis(trihexylsilyl oxide). The mechanism of the NIR-dye sensitization is studied by femtosecond transient absorption spectroscopy.     

An investigation of anthraquinone dye biodegradation by immobilized Aspergillus flavus in fluidized bed bioreactor

Purpose

Biodegradation and biodecolorization of Drimarene blue K₂RL (anthraquinone) dye by a fungal isolate Aspergillus flavus SA2 was studied in lab-scale immobilized fluidized bed bioreactor (FBR) system.

Method

Fungus was immobilized on 0.2-mm sand particles. The reactor operation was carried out at room temperature and pH?5.0 in continuous flow mode with increasing concentrations (50, 100, 150, 200, 300, 500?mg?l^?1) of dye in simulated textile effluent on the 1st, 2nd, 5th, 8th, 11th, and 14th days. The reactors were run on fill, react, settle, and draw mode, with hydraulic retention time (HRT) of 24?C72?h. Total run time for reactor operation was 17?days.

Results

The average overall biological oxygen demand (BOD), chemical oxygen demand (COD), and color removal in the FBR system were up to 85.57%, 84.70%, and 71.3%, respectively, with 50-mg?l^?1 initial dye concentration and HRT of 24?h. Reductions in BOD and COD levels along with color removal proved that the mechanism of biodecolorization and biodegradation occurred simultaneously. HPLC and LC?CMS analysis identified phthalic acid, benzoic acid, 1, 4-dihydroxyanthraquinone, 2,3-dihydro-9,10-dihydroxy-1,4-anthracenedione, and catechol as degradation products of Drimarene blue K₂RL dye. Phytotoxicity analysis of bioreactor treatments provided evidence for the production of less toxic metabolites in comparison to the parent dye.

Conclusion

The present fluidized bed bioreactor setup with indigenously isolated fungal strain in its immobilized form is efficiently able to convert the parent toxic dye into less toxic by-products.     

Photocatalytic degradation of azo dyes by nitrogen-doped TiO2 nanocatalysts

This study examined the photocatalytic degradation of three azo dyes, acid orange 7 (AO7), procion red MX-5B (MX-5B) and reactive black 5 (RB5) using a new type of nitrogen-doped TiO2 nanocrystals. These newly developed doped titania nanocatalysts demonstrated high reactivity under visible light (lambda>390 nm), allowing more efficient usage of solar light. The doped titania were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Experiments were conducted to compare the photocatalytic activities of nitrogen-doped TiO2 nanocatalysts and commercially available Degussa P25 powder using both UV illumination and solar light. It is shown that nitrogen-doped TiO2 after calcination had the highest photocatalytic activity among all three catalysts tested, with 95% of AO7 decolorized in 1 h under UV illumination. The doped TiO2 also exhibited substantial photocatalytic activity under direct sunlight irradiation, with 70% of the dye color removed in 1h and complete decolorization within 3 h. Degussa P25 did not cause detectable dye decolorization under identical experimental conditions using solar light. The decrease of total organic carbon (TOC) and evolution of inorganic sulfate (SO4(2-)) ions in dye solutions were measured to monitor the dye mineralization process.     

Influence of redox mediators and metal ions on synthetic acid dye decolourization by crude laccase from Trametes hirsuta

In this paper, the effect of redox mediators on synthetic acid dye decolourization (Sella Solid Red and Luganil Green) by laccase from Trametes hirsuta cultures has been investigated. All the redox mediators tested, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), 1-hydroxybenzotriazole (HBT) and Remazol Brilliant Blue R (RBBR), led to higher activities than those obtained without mediators addition showing the suitability of the laccase/mediator system (LMS) in the decolourization of acid dyes. HBT was by far the most effective mediator, showing a decolourization percentage of 88% in 10 min for Sella Solid Red and of 49% in 20 min for Luganil Green. On the other hand, the stability of laccase against several metal ions, normally found in textile wastewater, was assessed. Laccase was stable at a concentration of 1mM for 7d against all the metal ions tested except for Zn+2, CrO4(-2), Cd+2, Cr2O7(-2), Fe+2, Cu+2 and especially Hg+2. When the concentration was increased to 10mM laccase stability decreased against all the metals assayed, in particular against Fe+2. In addition, the effect of metal ions on the decolourization process was also studied. It was found that Hg+2 inhibited the dye decolourization process, being the presence of HBT absolutely required for dye decolourization.     

In situ photoelectrochemical/photocatalytic study of a dye discoloration in a microreactor system using TiO2 thin films

Introduction

In this work, we report in situ studies of UV photoelectrocatalytic discoloration of a dye (indigo carmine) by a TiO₂ thin film in a microreactor to demonstrate the driving force of the applied electrode potential and the dye flow rate toward dye discoloration kinetics.

Methods

TiO₂ 65-nm-thick thin films were deposited by PVD magnetron sputtering technique on a conducting glass substrate of fluorinated tin oxide. A microreactor to measure the discoloration rate, the electrode potential, and the photocurrent in situ, was developed. The dye solutions, before and after measurements in the microreactor, were analyzed by Raman spectroscopy.

Results

The annealed TiO₂ thin films had anatase structure with preferential orientation (101). The discoloration rate of the dye increased with the applied potential to TiO₂ electrode. Further, acceleration of the photocatalytic reaction was achieved by utilizing dye flow recirculation to the microreactor. In both cases the photoelectrochemical/photocatalytic discoloration kinetics of the dye follows the Langmuir?CHinshelwood model, with first-order kinetics.

Conclusions

The feasibility of dye discoloration on TiO₂ thin film electrodes, prepared by magnetron sputtering using a flow microreactor system, has been clearly demonstrated. The discoloration rate is enhanced by applying a positive potential (E _AP) and/or increasing the flow rate. The fastest discoloration and shortest irradiation time (50?min) produced 80% discoloration with an external anodic potential of 0.931?V and a flow rate of 12.2?mL?min^?1.     

Degradation of acid orange 7 in an aerobic biofilm.

A stable microbial biofilm community capable of completely mineralizing the azo dye acid orange 7 (AO7) was established in a laboratory scale rotating drum bioreactor (RDBR) using waste liquor from a sewage treatment plant. A broad range of environmental conditions including pH (5.8-8.2), nitrification (0.0-4.0 mM nitrite), and aeration (0.2-6.2 mg O2 l(-1)) were evaluated for their effects on the biodegradation of AO7. Furthermore the biofilm maintained its biodegradative ability for over a year while the effects of these environmental conditions were evaluated. Reduction of the azo bond followed by degradation of the resulting aromatic amine appears to be the mechanism by which this dye is biodegraded. Complete loss of color, sulfanilic acid, and chemical oxygen demand (COD) indicate that AO7 is mineralized. To our knowledge this is the first reported occurrence of a sulfonated phenylazonaphthol dye being completely mineralized under aerobic conditions. Two bacterial strains (ICX and SAD4i) originally isolated from the RDBR were able to mineralize, in co-culture, up to 90% of added AO7. During mineralization of AO7, strain ICX reduces the azo bond under aerobic conditions and consumes the resulting cleavage product 1-amino-2-naphthol. Strain SAD4i consumes the other cleavage product, sulfanilic acid. The ability of the RDBR biofilm to aerobically mineralize an azo dye without exogenous carbon and nitrogen sources suggests that this approach could be used to remediate industrial wastewater contaminated with spent dye.     

On the performance of Fe and Fe,F doped Ti-Pt/PbO2 electrodes in the electrooxidation of the Blue Reactive 19 dye in simulated textile wastewater

The electrochemical performance of pure Ti–Pt/β-PbO₂ electrodes, or doped with Fe and F (together or separately), in the oxidation of simulated wastewaters containing the Blue Reactive 19 dye (BR-19), using a filter-press reactor, was investigated and then compared with that of a boron-doped diamond electrode supported on a niobium substrate (Nb/BDD). The electrooxidation of the dye simulated wastewater (volume of 0.1 l, with a BR-19 initial concentration of 25 mg l⁻¹) was carried out under the following conditions: current density of 50 mA cm⁻², volume flow rate of 2.4 l h⁻¹, temperature of 25 °C and electrode area of 5 cm². The performances of the electrodes in the dye decolorization were quite similar, achieving 100% decolorization, and in some cases 90% decolorization was achieved by applying only ca. 0.3 A h l⁻¹ (8 min of electrolysis). The reduction of the simulated wastewater organic load, monitored by its total organic carbon content (TOC), was greater for the Ti–Pt/β-PbO₂–Fe,F electrode obtained from an electrodeposition bath containing 1 mM Fe³⁺ and 30 mM F⁻. In this case, after 2 h of electrolysis the obtained TOC reduction was 95%, while for the pure β-PbO₂ and the Nb/BDD electrodes the reductions were 84% and 82%, respectively.     

Competitive adsorption of dye metanil yellow and RB15 in acid solutions on chemically cross-linked chitosan beads

One kind of adsorbent with a high adsorption capacity for anionic dyes was prepared using ionically and chemically cross-linked chitosan beads. A batch system was applied to study the adsorption behavior of one acid dye (MY, metanil yellow) and one reactive dye (RB15, reactive blue 15) in aqueous solutions by the cross-linked chitosan beads. The adsorption capacities was 3.56 mmol g(-1) (1334 mg g(-1)) for dye MY and 0.56 mmol g(-1) (722 mg g(-1)) for dye RB15 at pH4, 30 degrees C. The Langmuir model agreed very well with the experimental data (R(2)>0.996). The kinetics of adsorption for a single dye and the kinetics of removal of ADMI color value in mixture solutions at different initial dye concentrations were evaluated by the nonlinear first-order and second-order models. The first-order kinetic model fits well with the dynamical adsorption behavior of a single dye for lower initial dye concentrations, while the second-order kinetic model fits well for higher initial dye concentrations. The competitive adsorption favored the dye RB15 in the mixture solution (initial conc. (mM): MY=1.34; RB15=1.36); while it favored the dye MY in the mixture solution (initial conc. (mM): MY=3.00; RB15=1.34) and the adsorption kinetics for dye RB15 has the tendency to shift to a slower first order model.     

Characterization of a simple bacterial consortium for effective treatment of wastewaters with reactive dyes and Cr(VI)

A microbial consortia consisting of three bacteria isolated from tanning and textile wastewaters revealed high capacity to simultaneously bioaccumulate dye and Cr(VI). The identity of the bacteria were determined by 16S rRNA gene analysis to be closely related to Ochrobactrium sp., Salmonella enterica and Pseudomonas aeruginosa. Dependence of initial pH values and range of concentrations of the dye Reactive Black B (33.2-103.1 mg l(-1)) and Cr(VI) (19.9-127.6 mg l(-1)) were examined to find the effect of pH on the dye and Cr(VI) bioaccumulation. Optimal pH for growth of the consortia in media containing 35 mg l(-1) dye and 50 mg l(-1) Cr(VI) was determined to be around 8. The Cr(VI) bioaccumulation by the consortia was rapid in media containing molasses with or without reactive dye with a maximum Cr(VI) bioaccumulation yield ranging from 90% to 99% within a 2-4d period. A slightly lower yield for the dye bioaccumulation was measured with a maximum dye bioaccumulation of 80% at 59.3 mg l(-1) dye and 69.8 mg l(-1) Cr(VI). The highest specific Cr uptake value was obtained as 76.7 mg g(-1) at 117.1 mg l(-1) Cr(VI) and 50.8 mg l(-1) dye concentration. This ability to bioaccumulate dye and Cr(VI) was more efficient than the enriched sludge from which they were isolated.     

Solar light induced and TiO2 assisted degradation of textile dye reactive blue 4

Aqueous solutions of reactive blue 4 textile dye are totally mineralised when irradiated with TiO2 photocatalyst. A solution containing 4 x 10(-4) M dye was completely degraded in 24 h irradiation time. The intensity of the solar light was measured using Lux meter. The results showed that the dye molecules were completely degraded to CO2, SO4(2-), NO3-, NH4+ and H2O under solar irradiation. The addition of hydrogen peroxide and potassium persulphate influenced the photodegradation efficiency. The rapidity of photodegradation of dye intermediates were observed in the presence of hydrogen peroxide than in its absence. The auxiliary chemicals such as sodium carbonate and sodium chloride substantially affected the photodegradation efficiency. High performance liquid chromatography and chemical oxygen demand were used to study the mineralisation and degradation of the dye respectively. It is concluded that solar light induced degradation of textile dye in wastewater is a viable technique for wastewater treatment.     

Degradation and decolorization of a biodegradable-resistant polymeric dye by chelator-mediated Fenton reactions

Chelator-mediated Fenton reactions (CMFRs) were used to decolorize a biodegradable-resistant polymeric dye (Poly R-478). Screening of different iron chelators was performed on Fe(3+)-reduction activity. All chelators showed Fe(3+)-reduction activity over a wide range of pH (2-7) and each mol of catecholate chelators (3,4-dihydroxiphenilacetic acid--DOPAC and 2,3-dihydroxibenzoic acid--DHBA) reduced about 5-6 moles of Fe(3+) whereas hydroxamate chelators (acetohydroxamic acid-AHA and desferrioxamine B-DFB) reduced Fe(3+) stoichiometrically. The most effective decolorization of Poly R-478 was achieved by CMFR using catecholate chelators. In addition, a 2(4) factorial design was performed with the aim of evaluating the effects of the variables considered in this study (pH, [DOPAC], [Fe(3+)] and [H(2)O(2)]) and optimizing the dye decolorization, using response surface methodology. Statistical analysis of results showed that, in the range studied, except for Fe(3+), all variables have a significant effect on dye decolorization. A second-order model is proposed to represent the Poly R-478 decolorization. At optimum conditions, complete decolorization of the dye (degradation of the chromophoric group) and also complete chemical degradation of the dye was observed.     

Enhanced degradation of acid red 1 dye using a coupled system of zero valent iron nanoparticles and sonolysis

Environmental Science and Pollution Research - The heterogeneous catalytic degradation of a model azo dye, acid red 1 (AR1), initiated by zero valent iron nanoparticles (ZVINP), and its synergic...     

Degradation of carbofuran in water by solar photocatalysis in presence of photosensitizers

The effect of the presence of photosensitizers, methylene blue (MB) and rose Bengal (RB), on the degradation of carbofuran (2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate) in water in a solar photocatalytic system was investigated. It was found that as compared to MB, RB generally showed a stronger effect on the decomposition of carbofuran under comparable conditions. Among the conditions studied, adding 2 x 10(-6) M of RB, that corresponding to 2% of the initial concentration of carbofuran solution in the system, rendered the most effective degradation of carbofuran. As a result, a carbofuran removal percentage of 69.9%, a mineralization efficiency of 28.0%, and a microtoxicity reduction of 65.0% could be achieved. The degradation and mineralization of carbofuran was found to follow the pseudo-first order reaction kinetics. The decomposition mechanism of carbofuran was further investigated through identification of the intermediates to elaborate the influence of dye photosensitizer on the solar photocatalysis of carbofuran in water. On the basis of the intermediates identified, including carbofuran phenol, 3-hydroxy carbofuran phenol, and substituted alcohols (3-phenoxy 1-propanol, 2-ethyl 1-hexanol, 2-butoxyl ethanol), it appears that hydrolysis and hydroxylation were the two key mechanisms for decomposing carbofuran during the process of solar photocatalysis with the aid of dye photosensitizer.     

Enhanced ozonation of simulated dyestuff wastewater by microbubbles

The ozonation of synthetic wastewater containing azo dye, CI Reactive Black 5, was investigated using a microbubble generator and a conventional bubble contactor. The microbubble generator produced a milky and high intensity microbubble solution in which the bubbles had a mean diameter of less than 58 microm and a numerical density of more than 2.9 x 10(4) counts ml(-1) at a gas flow rate of less than 0.5 l min(-1). Compared with the bubble contactor, the total mass transfer coefficient was 1.8 times higher and the pseudo-first order rate constant was 3.2-3.6 times higher at the same initial dye concentration of 100 mg l(-1), 230 mg l(-1) and 530 mg l(-1) in the proposed microbubble system. The amount of total organic carbon removed per g of ozone consumed was about 1.3 times higher in the microbubble system than in the bubble contactor. The test using terephthalic acid as the chemical probe implied that more hydroxyl radicals were produced in the microbubble system, which contributed to the degradation of the dye molecules. The results suggested that in addition to the enhancement of mass transfer, microbubbles, which had higher inner pressure, could accelerate the formation of hydroxyl radicals and hence improve the oxidation of dye molecules.     

Biodegradation and biosorption of acid anthraquinone dye

The acid anthraquinone dye Tectilon Blue (TB4R) is a major coloured component from the aqueous effluent of a carpet printing plant in Northern Ireland. The aerobic biodegradation of TB4R has been investigated experimentally in batch systems, using three strains of bacteria, namely, Bacillus gordonae (NCIMB 12553), Bacillus benzeovorans (NCIMB 12555) and Pseudomonas putida (NCIMB 9776). All three strains successfully decolourised the dye, and results were correlated using Michaelis-Menten kinetic theory. A recalculation of the reaction rate constants, to account for biosorption, gave an accurate simulation of the colour removal over a 24-h period. Up to 19% of the decolorisation was found to be caused by biosorption of the dye onto the biomass, with the majority of the decolorisation caused by utilisation of the dye by the bacteria. The reaction rate was found to be intermediate between zero and first order at dye concentrations of 200-1000 mg/l.     

Ozonation of an azo dye C.I. Remazol Black 5 and toxicological assessment of its oxidation products

The effect of ozonation (20.5 mgl(-1)) on the degradation processes of an azo dye, Remazol Black 5 (RB5; CI) was studied. Conventional parameters such as chemical oxygen demand (COD), total organic carbon (TOC), pH, conductivity, colour removal, biodegradability (BOD(5/28)), and toxic potential of the dye and its degradation products were monitored during the process. The results obtained indicated that ozonation is a highly effective way to remove the colour of a corresponding dye solution. However, a considerable organic load still remained as indicated by high COD and TOC residues. The COD, TOC reductions were about 40% and 25% for 6 h ozonation of 2 gl(-1) RB5 aqueous solution. During the ozonation process the rapid decrease of pH and the sharp increase of conductivity indicated the formation of acidic by-products and small fragments and ions which were identified by high performance ion chromatography. The BOD28 data revealed that first by-products after partial ozonation (10-150 min) of RB5 were more biodegradable than the parent compound and ozonation can enhance the biodegradability of azo dyes. During the first 150 min of total 360 min of oxidation, the formation of first by-products with high toxic potential took place as it could be confirmed by two acute toxicity-screening tests, the bioluminescence test (Vibrio fischerii) and the neutral red cytotoxicity assay (rat hepatoma cells). The significant enhancement of microbial biodegradability after long-term ozonation could also be seen as a decrease of toxic intermediates in correlation with the ozonation time as indicated in BOD28 biological degradation test results.     

真菌和细菌对染料吸附脱色的高效共培养体系研究

在含有真菌G 1培养液中加入染料厂污水排放口的污泥样品 ,从发生快速脱色降解染料的混合培养液中分离出 2株染料脱色细菌L_1和L_2 ,经API鉴定系统鉴定 ,确定菌株L_1为Enterobactersp .,菌株L_2为Peudomonassp .。研究比较了单一和不同组合混合的真菌G_1菌株 (Penicilliumsp .)、细菌L_1菌株 (Enterobactersp .)和L_2菌株 (Pseu domonassp .)对偶氮染料红M - 3BE(C .I .ReactiveRed 2 41)和蒽醌染料艳蓝KN -R(C .1.ReactiveBlue 19)的去除情况 ,发现G - 1真菌和 2种细菌组合的共培养体系对 5 0mg/L红M - 3BE和艳蓝KN -R处理 5h去除率达 10 0 %和 97.9% ,并且是以脱色降解作用为主 ,建立了染料脱色降解菌的最佳组合 ;进一步测定了此最佳共培养体系对另外 13种不同结构染料的脱色降解 ,结果表明 ,除对蒽醌染料R - 478脱色降解较差外 ,对其他染料均可在lh— 3d被完全脱色降解 ,表现出脱色降解染料的广谱性 ;向培养 4d的共培养体系中依次加入 8种染料 ,菌体可对染料连续脱色 ,维持脱色能力达 8d左右     

Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses

Present investigation deals with the utilisation of bagasse fly ash (BFA) (generated as a waste material from bagasse fired boilers) and the use of activated carbons-commercial grade (ACC) and laboratory grade (ACL), as adsorbents for the removal of congo red (CR) from aqueous solutions. Batch studies were conducted to evaluate the adsorption capacity of BFA, ACC and ACL and the effects of initial pH (pH(0)), contact time and initial dye concentration on adsorption. The pH(0) of the dye solution strongly affected the chemistry of both the dye molecules and BFA in an aqueous solution. The effective pH(0) was 7.0 for adsorption on BFA. Kinetic studies showed that the adsorption of CR on all the adsorbents was a gradual process. Equilibrium reached in about 4h contact time. Optimum BFA, ACC and ACL dosages were found to be 1, 20 and 2 g l(-1), respectively. CR uptake by the adsorbents followed pseudo-second-order kinetics. Equilibrium isotherms for the adsorption of CR on BFA, ACC and ACL were analysed by the Freundlich, Langmuir, Redlich-Peterson, and Temkin isotherm equations. Error analysis showed that the R-P isotherm best-fits the CR adsorption isotherm data on all adsorbents. The Freundlich isotherm also shows comparable fit. Thermodynamics showed that the adsorption of CR on BFA was most favourable in comparison to activated carbons.     

Decolorization and biodegradation of dye wastewaters by a facultative-aerobic process

BACKGROUND: Dye wastewater is one of the main pollution sources of water bodies in China. Conventional biological processes are relatively ineffective for color removal, the development of alternative treatment methods will become important. Our subjective was that of introducing a new biotreatment technology which combined a facultative biofilm reactor (FBR) with an aerobic reactor (AR) to treat a dye wastewater. The efficiencies of color and chemical oxygen demand (COD) removal and the mechanism of dye degradation were investigated. METHODS: The anthraquinone acid dye (acid blue BRLL) concentration, organic loading rate (OLR) and hydraulic retention time (HRT) were varied in the experiments to evaluate the treatment efficiency and process stability. The biodegradation products were detected by infrared (IR) and high performance liquid chromatography and mass spectrometry (HPLC-MS). RESULTS AND DISCUSSION: The results demonstrated that the facultative biofilm process was more effective for decolorization than the anaerobic stage of an anaerobic-aerobic process. Most color removal occurred in the facultative reaction (maximum to 88.5%) and the BOD (biochemical oxygen demand): COD of the FBR effluent increased by 82.2%, thus improving the biodegradability of dyes for further aerobic treatment. The dye concentration, OLR and HRT will be the factors affecting decolorization. Color removal efficiency falls as the influent dye concentration increases, but rises with increased HRT. The infrared and HPLC-MS analyses of the effluents of FBR and AR reveal that the dye parent compound was degraded in each reactor during the process. CONCLUSION: The Facultative-aerobic (F-A) system can effectively remove both color and COD from the dye wastewater. The FBR played an essential role in the process. The average overall color and COD in the system were removed by more than 93.9% and 97.1%, respectively, at an OLR of 1.1 kg COD m(-3) d(-1) and at the HRT of 18-20 hours in the FBR and 4-5 hours in the AR. The color removal mechanism in each reactor was not only a sort of biosorption on the floc materials, but even more an effect of biodegradation, especially in the facultative process. Recommendation and Outlook. In applying the F-A system to treat a dye wastewater, the control of facultative processes and the set up of appropriate operation conditions appear to be critical factors. Also, it is suggested a moderate COD loading rate and about a 24-hour HRT will favor the F-A system.     

Evaluation of different electrochemical methods on the oxidation and degradation of Reactive Blue 4 in aqueous solution

The oxidation of a reactive dye, Reactive Blue 4, RB4, (C.I. 61205), widely used in the textile industries to color natural fibers, was studied by electrochemical techniques. The oxidation on glassy carbon electrode and reticulated vitreous carbon electrode occurs in only one step at 2.0 < pH < 12 involving a two-electron transfer to the amine group leading to the imide derivative. Dye solution was not decolorized effectively in this electrolysis process. Nevertheless, the oxidation of this dye on Ti/SnO2/SbO(x) (3% mol)/RuO2 (1% mol) electrode showed 100% of decolorization and 60% of total organic carbon removal in Na2SO4 0.2 M at pH 2.2 and potential of +2.4V. Experiments on degradation photoelectrocatalytic were also carried out for RB4 degradation in Na2SO4 0.1 M, pH 12, using a Ti/TiO2 photoanode biased at +1.0 V and UV light. After 1h of electrolysis the results indicated total color removal and 37% of mineralization.