二氧化硅对膨胀型阻燃聚乙烯的性能影响研究

利用锥形量热仪(CONE)、裂解气相色谱仪(PyGC)、示差扫描量热仪(DSC)等先进的分析测试手段,研究了二氧化硅对膨胀型阻燃聚乙烯阻燃性能的影响、各阻燃剂之间的协同性以及阻燃机理。实验结果显示,阻燃剂的加入可延缓PE的降解过程,降低材料的热释放速率,降低基材在升温过程中的放热量,使基材具有良好的阻燃性;SiO2的适量加入可改善膨胀碳层的耐热性,当SiO2的添加量为6％时,协同阻燃效果最佳。     

基于CONE和MCC的典型电缆燃烧性能研究

采用锥形量热仪和微燃烧量热仪对四类不同护套材料的八种电缆样品进行燃烧性能分析,研究结果表明：电缆燃烧热释放过程不仅与护套、绝缘的材料密切相关,也与电缆结构密不可分;对于护套材料相同而大小或结构不同的电缆点燃时间和到达第一个峰值的时间以及第一个峰值最大热释放速率基本一致;聚烯烃无机阻燃材料电缆能够有效降低热释放速率峰值,CO2、CO释放量也明显低于橡胶电缆、普通PVC电缆和阻燃PVC电缆;微燃烧量热仪和锥形量热仪实验数据存在一定的相关性,微燃烧量热仪实验数据可以对电缆锥形量热仪实验的第一燃烧阶段燃烧行为进行预测。     

镁铝双氢氧化物对无卤阻燃EVA的协效阻燃效果研究

利用共沉淀法合成了镁铝双氢氧化物（MgAl-LDH）,采用熔融共混的方法,制备了含Mgal—LDH片层的无卤阻燃EVA纳米复合材料,通过多种表征手段分析研究了MgAl-LDH对无卤阻燃EVA（乙烯-醋酸乙烯酯共聚物）的协效阻燃效果。扫描电镜（SEM）和透射电镜（TEM）的结果表明LDH的片层能够促进阻燃剂在EVA基体中的分散;锥形量热仪（Conecalorimetry）燃烧测试表明协效阻燃EVA的热释放速率相对于纯阻燃EVA显著降低,其他主要燃烧参数也有同样的变化趋势,说明MgAl-LDH具有良好的协效阻燃作用。材料的燃烧残余物的形貌分析表明,LDH协效阻燃EVA在燃烧过程中能形成致密而连续的保护层,有效阻隔材料在燃烧过程中气体挥发物的扩散和与燃烧环境间能量的交换,提高燃烧残留量,降低材料的火灾危险性。     

GP/APP膨胀阻燃体系对硅橡胶复合材料阻燃及抑烟性能的影响

为了探究石墨粉 (GP) 与聚磷酸铵 (APP) 膨胀阻燃体系对硅橡胶复合材料的阻燃及抑烟特性的影响，采用锥形量热仪 (CCT)、热重分析仪 (TG) 及极限氧指数测试仪 (LOI) 对阻燃硅橡胶复合材料进行表征。研究结果表明:与单独添加膨胀阻燃剂APP的阻燃硅橡胶相比，添加GP/APP膨胀阻燃体系可有效提升燃烧过程中形成的膨胀碳层的致密度，降低阻燃硅橡胶复合材料的热释放速率及总烟释放量，提高阻燃硅橡胶复合材料高温阶段的热稳定性，提升阻燃硅橡胶复合材料的燃烧成炭率和质量保持率； 使阻燃硅橡胶复合材料的氧指数值增大。     

负载镍有机蒙脱土体系对HIPS阻燃性能影响的研究

研究主要采用离子交换、溶液浸渍、球磨等方法制备负载镍有机蒙脱土体系,并采用熔融插层法制备PLS纳米复合材料,用锥形量热仪等试验仪器对材料的燃烧性能进行测试与评价。研究结果表明:采用离子交换法制备的负载镍有机蒙脱土体系能较好的降低复合材料的热释放速率,其阻燃作用比有机蒙脱土略好。通过对HIPS/负载镍有机蒙脱土复合材料燃烧后炭层的形貌及质量损失的分析与研究,推断其阻燃机理为镍催化HIPS在燃烧过程生成的炭与有机蒙脱土的插层结构共同起到了物理屏蔽阻燃作用。     

相变调温防护服用织物的阻燃性能研究*

为提高相变调温防护服的阻燃性能,以保障工作人员的生命安全,系统开展阻燃型相变微胶囊涂层织物的制备与阻燃性能研究。选取2种相变温度的相变微胶囊、2种阻燃基布,利用干法涂层工艺制备相变微胶囊涂层织物;选取2种阻燃剂,以45%和75%的比例涂覆在相变微胶囊涂层的表面,制成16种阻燃型相变微胶囊涂层织物。基于锥形量热仪进行涂层织物阻燃性能测试,分析阻燃剂对涂层织物阻燃性能的影响。结果表明:与未进行阻燃整理的涂层织物相比,有机硅阻燃剂涂层织物的总热释放量平均下降42.22%,磷氮型阻燃剂涂层织物的总热释放量平均下降25.07%,并且随着阻燃剂含量的增加,总热释放量呈下降趋势。另外,有机硅型阻燃剂明显降低了热释放速率与总热释放量,而磷氮型阻燃剂有效地延长了织物开始释放热量的时间和热释放速率达到峰值的时间。因此,2种阻燃剂从不同角度优化了相变微胶囊涂层织物的阻燃性能,提高了相变调温防护服的使用安全性。     

硼酸锌对膨胀阻燃聚甲醛的协效阻燃研究

为进一步提高膨胀型阻燃剂(IFR)对聚甲醛(POM)的阻燃效果,首先将硼酸锌(ZB)与常用IFR(聚磷酸铵-三聚氰胺-季戊四醇)共混制得ZB-IFR复配膨胀阻燃体系的样品,采用熔融共混法制备ZB-IFR/POM复合阻燃材料;然后利用极限氧指数(LOI)测定仪、垂直燃烧(UL-94)测试法、热重分析(TGA)法、扫描电镜(SEM)、锥形量热仪(CONE)及热重-红外(TG-IR)仪等研究ZBIFR对POM的协效阻燃作用。结果表明:当ZB含量为1%时,所得1.0ZB-IFR/POM的LOI可达55%,UL-94等级为V-0级;其受热膨胀后所得残炭量高,炭层结构致密稳定,且在燃烧过程中的热释放速率(HRR)、质量损失及烟气释放量均最小,火灾性能指数(FPI)相对最高;除此,不含ZB的IFR/POM在受热分解过程中比1.0ZB-IFR/POM放出更多的CO2,说明ZB的加入能有效地抑制复合阻燃材料的充分燃烧,显示出良好的协效阻燃作用。     

阻燃剂对棉布和地毯热解燃烧性能的影响研究

研究了氢氧化铝和三聚氰胺氰尿酸盐对棉布和地毯热解和燃烧行为,考察了阻燃剂添加量对棉布和地毯点燃时间、热解速度和火焰持续时间的影响,并利用锥形量热仪测定了添加阻燃剂前后材料在点燃时间、热释放速率、质量损失速率和CO释放速率的变化,结果表明海水中添加10%的Al(OH)3和MCA可显著降低棉布和地毯的热解速度及热释放速率.     

新型膨胀型阻燃剂的合成及其在聚丙烯(PP)中的应用

以氨基三甲叉磷酸（ATMP）、尿素为原料采用热缩合法合成新型膨胀型阻燃剂一ATU。用傅里叶红外光谱及元素分析表征ATU的结构及组成。将ATU与常见碳源季戊四醇进行复配,应用于PP材料的阻燃。研究发现ATU集气源酸源于一身,对于PP阻燃效果明显,甚至好于同比例的APP。极限氧指数仪和垂直燃烧仪测试材料燃烧等级;微型燃烧量热仪（MCC）研究了材料燃烧过程中热释放情况;热重分析（TGA）和扫描电镜（SEM）分别从材料的热降解及成炭原理方面上对ATU的阻燃机理进行了研究。     

双(对羧苯基)苯基氧化膦阻燃改性聚酯的热解和燃烧特性实验研究

本文以双(对羧苯基)苯基氧化膦为阻燃单体,合成了阻燃共聚酯(COPET)。通过热失重分析和锥形量热分析,研究了阻燃共聚酯的热降解行为和燃烧特性,并对阻燃剂的阻燃机理进行了简单的讨论。实验结果表明,阻燃剂双(对羧苯基)苯基氧化膦是适于聚酯的较好阻燃剂,但其发烟量有待抑制。     

Comparing the flammability of fabrics in accordance with EN 531 and ENV 50354.

The purpose of protective clothing and other personal protective equipment (PPE) is to provide escape time, to reduce the burn injury level, and to prevent aggravation of the consequences to workers during exposure to an electric arc. In this study the flammability properties of 12 different types of flame-retardant fabrics were compared with the normally used flame spread test method (EN 532:1994) and electric arc test method (ENV 50354:2001). In the arc test at the lower testing current level of 4 kA, the requirement was passed by materials which did not pass the flame spread test. These materials contained a large amount of melting fibres, and therefore tended to shrink or melt. In order to meet the current level of 7 kA, a rather thick and heavy flame-retardant fabric is needed to pass the requirement. Lighter fabrics tended to break open in the tests. The flame retardancy of the under layer fabric is therefore important to ensure the needed protection.     

Effects of N2 and CO2 on the flammability of 2,3,3,3-tetrafluoropropene at elevated temperatures

The flammability characteristics of refrigerants are affected by environmental factors, making them prone to flammability and explosion accidents in cooling systems. In this paper, the flammability characteristics of R1234yf–air mixtures with N₂ and CO₂ were investigated comparatively at temperatures between 20 and 50 °C at 80% relative humidity. The lower and upper flammability limits of R1234yf were measured. The limiting oxygen concentration (LOC), critical flammable ratio (CFR), and critical flammable concentration (CFC) of the R1234yf–air mixtures with inert gases were investigated. The paper developed a linear formula between the flammability limit of R1234yf and the temperature. The changes in CFC with different temperatures were negligible for R1234yf. Furthermore, the mixed refrigerant had both non-flammability and the lowest vapor pressure when the CFR of the R1234yf/CO₂ mixture was 2.9. The experimental results were used to propose a new prediction model to estimate the flammability limits of R1234yf. Finally, molecular simulation explained the effect of inert gases on the flammability of R1234yf from a microscopic point of view. The research aimed to provide valid evidence and data for preventing flammable and explosive refrigerant incidents.     

Prediction of flammability limits of fuel-air and fuel-air-inert mixtures from explosivity parameters in closed vessels

Flammability limits of fuel-air and fuel-air-inert gaseous mixtures, especially at non-atmospheric conditions, are essential properties required for establishing safety operating conditions for handling and processing flammable gases. For pure fuels, an important data pool exists, formed by the flammability limits of fuel-air and fuel-air-inert gaseous mixtures at ambient initial conditions measured by standard methods. Such methods can be used for experimental determination of flammability limits for multi-fuels mixed with air, with or without additives, under non-atmospheric conditions. Their use is however a time- and material-consuming process; in addition, the flammability limits obtained by various standard methods may be scattered as a result of different choices in the operating parameters, for each standard method. It appears that a preliminary estimation of the flammability limits for fuel-air and fuel-air-inert gaseous mixtures can minimize the effort of measuring them in specific initial conditions.The present paper describes a new method for estimating the flammability range of fuel-oxidizer gaseous mixtures based on measurements of explosivity properties e.g. the peak explosion pressure and maximum rate of pressure rise recorded during closed vessel laminar explosions of fuel-oxidizer mixtures far from limits. Data obtained for several hydrocarbon-air gaseous mixtures with or without inert gas addition are used to examine the accuracy of estimated flammability limits (LFL – the lower and UFL – the upper flammability limit) as well as of the Limiting Oxygen Concentration (LOC) and the Minimum Inert Concentration (MIC). The predictive ability of the proposed method is examined against the predictive ability of other recently described methods.     

基于桶式环形加热的阻燃电缆细观竖直燃烧特性研究实验平台的设计

针对阻燃电缆等难燃材料,为研究其在外界热源条件下的火灾性能与蔓延燃烧特性,研制了基于环形加热的阻燃电缆细观燃烧特性诊断实验平台。该平台主要包括三个部分,即:半封闭环形桶式加热与燃烧腔室、样品竖直固定模块和数据采集系统。实验参数的标定及典型阻燃电缆受热与燃烧实验结果表明,常规条件下无法点燃的阻燃电缆,当置于实验平台的加热炉内被加热一段时间后,底部小火源可将其点燃并呈现猛烈的燃烧与蔓延过程。该加热模块能够详细、准确地研究各种阻燃电缆在环形加热条件下的膨胀、引燃及蔓延燃烧的细观特性,而不同的加热模式有助于深入研究阻燃材料在各种热环境下的火灾特性,为阻燃材料的引燃机理及火蔓延模型研究提供了必要的研究平台。     

异形阻燃木-混凝土组合梁耐火特性实验*

为提高纯木梁的耐火性能,提出异形阻燃木-混凝土组合梁提高耐火性能的方法。通过实验研究对比Π形、T形的异形阻燃木-混凝土组合梁与全混凝土梁受火特性和剩余承载力。研究结果表明:3面受火后,异形阻燃木-混凝土组合梁上部多数区域未达强度降低起始温度,全混凝土梁均超过强度降低起始温度,且受火温度远远高于木-混凝土组合梁;T形阻燃木-混凝土组合梁试件剩余承载力最大,耐火能力最强,Π形阻燃木-混凝土组合梁次之,全混凝土梁最差;异形阻燃木-混凝土组合梁受火后损坏情况轻于全混凝土梁,但产烟量大于全混凝土梁。     

近年我国家装材料变化对住宅火灾的影响研究

住宅火灾危险性和家装材料有着紧密联系。为研究近年我国家装材料变化对住宅火灾的影响,调研了近30年我国家装材料的变化趋势,分析了常见家装材料的火灾特性变化,并完成了对不同年代常见家装材料组合的火灾危险性综合评价,结果表明:随着近30年家装材料的变化,软体家具、木质家具、地板和壁纸的燃烧性能均有所改善,但软体家具产烟能力恶化;2000年~2010年合成材料的应用使得家装材料组合的综合火灾危险性有所提升,引起大型亡人火灾的可能性更大;2010年后阻燃材料的普及使得家装材料组合的综合火灾危险性有所降低,对消防安全的作用已经凸显,但同时我国住宅火灾中“小火亡人”事故可能更为频发,未来研究应该更加关注于降低阻燃材料的烟气危害性。     

建筑材料及制品燃烧性能试验规范概述

建筑材料和制品燃烧性试验规范对保证建筑物内人的生命安全和财产安全是极为重要的。笔者对美国、加拿大、欧盟、日本以及中国的建筑材料燃烧性能试验规范进行分析、比较和综述。通过研究认为美国和加拿大对建筑材料燃烧性能的要求和试验方法基本相似,他们主要针对材料的燃烧性、火焰传播进行检测;欧盟于2001年颁布了新的燃烧性分级体系,该分级体系包括专门针对铺地材料部分和针对其他所有建筑构件材料和产品部门;日本采用锥形量热计法(ISO5660)将内装饰材料分为不燃、准不燃和阻燃材料3个等级;我国对建筑材料的试验方法包括不燃性试验方法、墙和天花板内装饰材料的三级分级体系和铺地材料两级分级体系。     

Suppression effects of ammonium dihydrogen phosphate dry powder and melamine pyrophosphate powder on an aluminium dust cloud explosion

Selecting a suitable flame-retardant powder is essential for preventing or reducing the risk of aluminium dust cloud explosions. Two types of retardant materials were studied, namely ABC powder (a flame-retardant powder mainly composed of ammonium dihydrogen phosphate dry powder) and melamine pyrophosphate powder (MPP). A specially designed rectangular pipe was used to examine the influences and mass fractions of the aforementioned flame retardants and the effects of compounds on maximum explosion pressure and maximum explosion pressure rate of increase. The results showed that the explosion-suppression effects of MPP powder were superior to those of ABC powder. Furthermore, the suppression effects of combining ABC and MPP to form compounds in various ratios were explored. The explosion-suppression effects of the single flame-retardant powders and flame-retardant powder compound were compared, which revealed that the effects of the flame-retardant compound were intermediate to those of ABC and MPP used separately. No synergistic effect was observed in the compound retardant. However, component mass fractions influenced the retardant properties of the compound. The suppression mechanism was investigated through thermal analysis, which revealed that the decomposition of the two flame-retardant powders was an endothermic process that generated inert gas. The addition of flame-retardant powder delayed the time required by aluminium to break through its oxide film. However, the thermal analysis curve of the compound overlapped those of the two single powders, and no new chemical reaction occurred. Thus, no change was observed in the efficacy of the flame-retardant properties.     

复合无机防火涂料优配研究

以市售无机膨胀型AB牌防火涂料为研究基础,复合了膨胀阻燃剂(APP-MEL-PER阻燃体系)、抑烟剂和助剂,进行了新型防火涂料的制备,当膨胀阻燃体系(APP-MEL-PER阻燃体系)以17∶6∶6的配比混合于该涂料中,其所占质量百分比为19%的时,防火性能最好。测试表明,该新型防火涂料烟密度等级6.77,指数下降了10,接近于国家标准1级。在248℃~400℃期间失重仅为12%,在390℃,有强烈的吸收峰,也表现了优异的阻燃性能。实现了APP-MEL-PER膨胀阻燃剂和AB牌涂料优配的目的。