The Role Played by Acetyl Group Distribution Patterns in Substituted Starch Toward Enzymatic De-acetylation and Chain Fragmentation

The nature and distribution of the acetylated groups were evaluated by ¹³C-NMR and ¹H-NMR. The starch substrate with a DS of 1.5 comprises only two patterns: -(14)-d-glucopyranose and 2,3,6-tri-O-acetyl--(14)-d-glucopyranose. The starch with a DS of 3.0 also comprises two patterns: 2,3,4,6-tetra-O-acetyl--(14)-d-glucopyranose and 2,3,6-tri-O-acetyl--(14)-d-glucopyranose; whereas starch (DS = 1.9) contains 4 patterns: 2,3,6-tri-O-acetyl--(14)-d-glucopyranose, 2,3,4,6-tetra-O-acetyl--(14)-d-glucopyranose terminal, 2,6-di-O-acetyl--(14)-d-glucopyranose, and 3,6-di-O-acetyl--(14)-d-glucopyranose. Using esterase from Viscozyme, it has been possible to hydrolyze up to 7% of the DS 3.0 starch. An -amylase (Fungamyl 800) was then added to these acetylesterases. With a 2.4 FAU/mL fraction of -amylase and 2.4 U/mL from the Viscozyme's acetylesterase, 28% of the acetylated end groups were hydrolyzed for the starch substrates with DS 3.0. Moreover, a synergic action between -amylase and acetylesterase was noticed, allowing fragmentation of 32% for DS 1.5, 30% for DS 1.9, and 11% for DS 3.0.     

A carbon-13 method for evaluating degradation of starch-based polymers

A new method for evaluating biodegradability of starch-based and certain other polymer blends uses the pre- and postexposure stable carbon isotope composition of material coupled with weight loss data to determine which components have degraded. The naturally occurring stable isotope of carbon.¹³C, is enriched in corn starch (¹³C, approx. –11) compared to petroleum-derived synthetic polymers (¹³C, approx. –32). Results on starch-synthetic polymer blends indicate that the ¹³C signatures of these blends are near-linear mixtures of their component ¹³C. Values of a ¹³C for starch-synthetic polymer blends exposed to biologically active laboratory soil and artificial seawater conditions are depleted in¹³C compared to unexposed samples, suggesting loss of the starch component. Combined with weight loss data for the exposed samples, the ¹³C values are statistically consistent with models requiring loss of the soluble component glycerin, followed by loss of starch, then petrochemical polymer, or simultaneous loss of starch and petrochemical polymer. Replicate ¹³C analyses of starch-synthetic polymer blends increase the statistical power of this relatively inexpensive, accessible technique to discriminate between degrading components.     

Species Composition of Freshwater Invertebrates in Relation to Chemical and Physical Factors in High Mountains in Soutwestern Norway

The composition of benthic invertebrates was investigated in three Norwegian alpine watersheds during the period 1991–1997. The watersheds represented an environmental gradient in chemical factors. The Kvenna watershed was relatively well buffered, Lake Øvre Neådalsvatn was poorly buffered, but receives low inputs of atmospheric pollution while Lake Stavsvatn has low buffering capacity and receives larger inputs of acidifying components. Qualitative samples were taken in the inlet rivers, lake littoral zone, lake outlet and in the outlet rivers of the lakes for analyses of species composition. In Ø. Neådalsvatn the water chemical data showed strong seasonal variations with waters of low ionic content during snowmelt and summer, while increased ion concentrations build up during winter. The time of ice break and/or water temperature rise during the growing season affected the life cycle of Siphlonurus lacustris and Parameletus chelifer. Even small changes in pH or ANC seemed to have a strong effect on Baetis rhodani. In the Kvenna watershed eight very sensitive species were found at sites with pH 6.5, Ca 1.2 mg L^-1 and LAl < 10 eq L^-1. Only two highly sensitive species, B. rhodani and Capnia sp. were recorded when pH was 6, concentration of calcium 0.8 mg L^-1 and low labile aluminium < 10 eq L^-1. None of the highly sensitive species occurred in Stavsvatn, a formerly acidified area, where LAl concentrations ranged between 25–40 eq L^-1. Low ionic content and elevated concentrations of labile aluminium are suggested to exclude sensitive invertebrates in alpine lakes. Synergistic effects of dilute water and harsh climate are assumed to increase sensitivity of invertebrates to acid water. Global warming will result in higher precipitation and more snow in the west Norwegian alpine area. This will shorten the growing season, increase the amount of dilute water and consequently threaten invertebrate species living close to their tolerance limits.     

Investigation of the Aerobic Biodegradability of Several Types of Cyclodextrins in a Laboratory-Controlled Composting Test

The biodegradation of several types of cyclodextrins (CDs) under laboratory-controlled composting conditions was investigated. CDs are used in a broad range of applications in food, pharmaceutical, medical, chemical, and textile industries because of their specific chemical characteristics related to their hydrophobic interior and hydrophilic exterior. The three naturally occurring cyclodextrins -CD, -CD, and -CD proved to be completely and readily biodegradable. Chemical modification of these basic compounds can have a major impact on the biodegradation rate and final biodegradation percentage. Fully acetylated -CD and -CD were found to be nonbiodegradable during 45 days of composting. Reducing the degree of acetylation had a positive effect on the biodegradation. Complete biodegradation was obtained for partially acetylated -CD with a degree of substitution (DS) of 7. The methylation (DS = 13) of -CD resulted in an undegradable compound during the 47 days composting, while (2-hydroxy)propyl--CD reached a plateau in biodegradation at a percentage of 20%. The incorporation of the antimicrobial agents imazalil and allyl-isothiocyanate into -CD had no negative impact on biodegradation, which makes these antimicrobial agents/CD complexes suitable for incorporation into biodegradable active packaging.     

Biodegradability of Thermally Aged PHB,PHB-V,and PCL in Soil Compostage

The biodegradability of poly--hydroxybutyrate (PHB), poly--hydroxybutyrate-co-valerate (PHB-V) and poly--caprolactone (PCL) were examined following thermal aging in an oven for 192, 425 and 600 h. Different temperatures, 100, 120 and 140°C for PHB and PHB-V and 30, 40 and 50^oC for PCL were used to assess the influence of this parameter on biodegradation. The biodegradability tests were done in soil compostage at pH 11.0 and involved measuring the residual mass of polymer. Thermal analysis of the polymers was done using a differential scanning calorimeter (DSC). The melting temperature and crystallinity were also determined. Thermal ageing increased the biodegradability only for PHB at 120 and 140^oC, and there was no correlation between crystallinity and the biodegradation of the polymers.     

Remediation of Persistent Organic Pollutants Using a Novel Two-Phase Soil Washing Biosorption Process

A two-phase soil washing biosorption process was developed for the remediation of p,p-DDT-contaminated soil. The process involved desorption of contaminants from soil using dilute primary alcohols (40% 1-propanol) followed by contaminant removal from cosolvent solutions using fungal biosorption. Bench scale remediation studies were preformed to simulate ex situ (recycling experiment) or in situ (soil column study) treatment strategies. Both systems were effective at cleaning the soil to below Australian regulatory p,p-DDT levels. After 50–80 hours of soil washing, over 93% of p,p-DDT was removed from the soil(990 mg kg^-1 to <65 mg kg^-1) using either of these methods.p,p-DDT was removed from the cosolvent phase by sorption onto the fungal biomass. This resulted in only low levels of p,p-DDT remaining in the cosolvent solution(<1.5 mg l^-1). The application of both treatment strategies resulted in the rapid clean up of p,p-DDT-contaminated soil and the potential to recycle cosolvent solutions. The ability to recycle cosolvent solutions provides a mechanism for cost reductions of the remediation strategy.     

The Application of Stable Isotopes for Assessing the Hydrological, Sulfur, and Iron Balances of Acidic Mining Lake ML 111 (Lusatia, Germany) as a Basis for Biotechnological Remediation

Stable isotope (¹⁸O–H₂O, ²H–H₂O ³⁴S–SO₄ ^2-) andhydrochemical data (SO₄ ^2-, Fe-concentrations) have beenused to estimate the annual groundwater inflow and outflow of mining lake ML 111 and to calculate the total amount of dissolvedsulfate and iron that is carried into the lake by groundwater. The hydrological balance suggests an annual groundwater inflow of 23 700 m³ and an annual groundwater outflow of 15 700 m³. The calculation of the sulfur and iron balances yielded an annual sulfate input of 37 800 kg and an annual iron input of 7000 kg with the groundwater inflow. Furthermore it was shown that significant fluxes of these elements go into the lake sediments which results in continuous release of acidity in the lake water.     

Correlating the Spatial Distribution of Atmospheric Ammonia with δ15N Values at an Ammonia Release Site

A field ammonia (NH₃) release experiment and open top chambers containing moorland monoliths continuously fumigated with NH₃ or sprayed with NH₄Cl were used to assess the potential for using ¹⁵N values in determining the area of influence around a point NH₃ emission source. ¹⁵N values are being increasingly used as environmental tracers and we tested the hypothesis that the ¹⁵N signal from an NH₃ emission source is observable in nearby vegetation. Using modified monitoring devices, atmospheric NH₃ concentrations were found to decrease with distance from source, with ¹⁵N values also reflecting this trend, producing a signal shift with changing concentration. Open top chamber studies of ¹⁵N values of Calluna vulgaris (L.) Hull indicated a correlation with deposition treatments in current year shoots. Analysis of Calluna shoots from the NH₃ release showed a similar trend of ¹⁵N enrichment. Significant linear correlations between ¹⁵N and percent N in plant material were found, both in the controlled conditions of the open top chambers and at the NH₃ release site, illustrating the possible use of this technique in N deposition biomonitoring.     

Graft Copolymers, for Erodible Resins, from α-Hydroxyacids Oligomers Macromonomers and Acrylic Monomers

Environmental concerns result in a progressive withdrawal of antifouling paints containing organotin derivatives. The nature of the binders is critical with regard to the erosion of the protecting film through factors such as bond cleavage, dissolution, and diffusion of the degradation products. The versatility of acrylic polymers, due to the possibility of varying their chemical structure had conducted, in the first stage, to combine different types of repeating units in the macromolecular backbone. Formulation and evaluation, in natural sites, of these binders, with a well-defined hydrophobic/hydrophilic balance and with hydrolyzable pendant groups, have shown the possibility to prepare new organotin free resins which can be formulated and which are erodible in seawater over a long period (more than 2 years). A further step has been engaged with the development of graft copolymers containing biocompatible and hydrolyzable oligomers of -hydroxyacids. Their preparation requires the synthesis of -methacryloyloxyoligo--hydroxyacid macromonomers. Copolymers prepared from a mixture of the macromonomer and of an alkyl ester of acrylic acid were formulated with a biocide and deposited on a plate. Their ability to release cuprous oxide, as a model molecule, has been checked and quantified by the inductively coupled plasma analytical method. The uptake of water in the paint, which is enhanced by the hydrolysis of -hydroxyacid oligomers, as determined by the enzymatic measurement of liberated L-lactic acid, conducts to the polymer erosion and to a protecting bioactive surface.     

Effect of Crystalline and Amorphous Structures on Biodegradability of Poly(Tetramethylene Succinate)

The effect of orientation in the amorphous and crystalline regions on the biodegradability of PTMS [poly(tetramethylene succinate)] was studied using the amorphous orientation function, birefringence, and crystallinity. The crystalline and amorphous intrinsic lateral sonic moduli, E _t,c ⁰ and E _t,am ⁰ , were 2.61 × 10³ and 0.41 × 10³ MPa, respectively. Using the data on birefringence, crystalline and amorphous orientation function (f and f _am), crystallinity, and sonic modulus of the oriented PTMS fibers, the intrinsic birefringence of the crystalline ( _c ⁰ ) and amorphous ( _am ⁰ ) regions were evaluated to be 0.0561 and 0.0634, respectively. The biodegradabilities of oriented PTMS films were reduced as the elongation increased, i.e., the amorphous orientation increased. At low elongation (100 and 150%), however, biodegradabilities remained unchanged when the degradation test was performed in activated sludge, which was attributed to the amorphous orientation occurring even at 100% elongation, though the amorphous orientation direction was perpendicular to the fiber axis.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.     

A Comparison of Loch Chemistry from 1955 and 1999 in the Cairngorms,N.E. Scotland

The Cairngorms in north-east Scotland is remote from pollutant sources although it currently receives ca. 10 kg ha¹ yr¹ S and ca. 11 kg ha¹ yr¹ N deposition from the atmosphere.In 1955, 15 lochs (lakes) at a range of altitudes were sampled and analysed for major ion concentrations. A new survey of these and an additional 23 lochs and their catchment soils was conducted in 1999 to determine the impact of acid deposition, and the changes in loch chemistry since the 1955 survey. The bedrock geology of this region has a strong influence on the loch chemistry. Surface waters were generally more acidic in high altitude areas due to predominantly poorly buffered, thin alpine soils developed on granitic parent material (mean acid neutralising capacity (ANC) for 23 lochs = 30 eq L¹). At lower altitudes where the geology is dominated by Dalradian metamorphic rocks surface waters are comparatively base rich and have higher ANC (mean ANC for 15 lochs = 157 eq L¹). Surface water nitrate concentrations show a negative relationship with soil C:N status, in that higher nitrate only occurs at low soil C:N ratios. A comparison of data for 1955 and 1999 shows that sulphate concentrations are significantly lower (67.8 and 47.5 eq L¹, respectively), and pH has improved (pH 5.6 and 5.9) in response to decreased S deposition since the mid 1970s. However, mean nitrate concentrations were found to increase from 2.48 >eq L¹ in 1955 to 5.65 eq L¹ in 1999. Differences in the sampling and laboratory methods from 1955 and 1999 are acknowledged in the interpretation of data.     

14C-Photosynthesis of Phytoplankton in an Oligotrophic Alpine Lake (Traunsee,Austria) and its Response to Turbidity Caused by Industrial Tailings

The influence of industrial tailings on the biological integrity of the phytoplankton was assessed from annual measurements of photosynthetic rates in the alpine lake Traunsee. The mean annual integral production of 21 mmol C m^-2 d^-1 corresponded to the oligotrophic nature of the lake. Effects of effluents were tested by comparing photosynthesis at a station close to the industrial outlet (EB) and at a reference site with a maximum depth of 190 m (VI). Between-site optical properties (vertical attenuation coefficient, euphotic depth) were statistically significant different. The euphotic zone at the impacted station was on average 2 m shallower than at the reference site, owing to turbidity emanating from the industrial plant. The adaptation to low light intensities by the algal community at this station was evident from a high maximum light utilisation coefficient (^* at low light saturation (E _K). Algae at the deep reference site were photosynthetically less efficient but adapted to high light intensities. Photosynthetic adaptation to different light climates in the euphotic zone without significant quantitative biomass alterations at the impacted site gave a clear signature of biological integrity of the phytoplankton in the oligotrophic Traunsee.     

Tree Leaf Biomarkers for Atmospheric Nitrogen Deposition

The aim of this paper was to investigate the effects of nitrogen (N) deposition on tree N cycling and identify potential biomarkers forNdeposition. Between April and October 2002 extensive fieldwork was undertaken at Mardley Heath in Hertfordshire. This woodland, located adjacent to the A1(M) motorway, is exposed to high levels of atmospheric nitrogen oxides from the traffic. Measurements of ¹⁵N, in vivo nitrate reductase (NR) activity, tissue, xylem and surface nitrate concentrations as well as N concentration and growth were made along a 700-m transect at 90° to the motorway. The ¹⁵N data show that oxidised N from the road traffic is taken up by nearby trees and is incorporated into plant tissues. Our measurements of NR activities suggest elevated rates close to the motorway. However, xylem sap, leaf tissue and leaf surface nitrate concentrations showed no differences between the roadside location and the most distant sampling point from the motorway. Taken together the ¹⁵N and nitrate reductase data suggest uptake and assimilation of N through the foliage.We conclude that for this lowland deciduouswoodland, tissue, xylem and surface measurements of nitrate are unreliable biomarkers for N deposition whereas ¹⁵N, growth measurements and integrated seasonal NR might be useful. The results also point to the benefit of roadside tree planting to screen pollution from motor vehicles.     

The Effect of Nitrogen Enrichment on the Carbon Sink in Coniferous Forests: Uncertainty and Sensitivity Analyses of Three Ecosystem Models

Estimates of the global carbon sink induced by nitrogen enrichment range vary widely, from nearly zero to 2.3 Gt C year^-1. It is necessary to reduce this uncertainty if we are to make accurate predictions of the future magnitude of the terrestrial carbon sink. Here, we present a Monte Carlo approach to uncertainty and sensitivity analysis of three ecosystem models, Century,BGCand Hybrid. These models were applied to a coniferous forest ecosystem in Sweden. The best estimate of the change in total carbon content of the ecosystem with the cumulative change in nitrogen deposition over 100 years, C_total/N_deposition was 20.1 kg C (kg N)^-1 using the pooled mean, with a pooled standard deviation of 13.8 kg C (kg N)^-1. Variability in parameters accounted for 92% of the total uncertainty in C_total/N_deposition, and only 8% was attributable to differences between models. The most sensitive parameters were those which controlled the allocation of assimilate between leaves, roots and stem. In particular, an increase in allocation to fine roots led to a large reduction in C_total/N_deposition in all models, because the fine roots have a very high turnover rate, and extra carbon allocated there is soon lost through mortality and decomposition.     

Novel Biobased Polyurethanes Synthesized from Soybean Phosphate Ester Polyols: Thermomechanical Properties Evaluations

Biobased polyurethanes from soybean oil–derived polyols and polymeric diphenylmethane diisocyanate (pMDI) are prepared and their thermomechanical properties are studied and evaluated. The cross-linked biobased polyurethanes being prepared from soy phosphate ester polyols with hydroxyl contents ranging from 122 to 145 mg KOH/g and pMDI within 5 min of reaction time at 150°C in absence of any catalyst show cross-linking densities ranging from 1.8 × 10³ to 3.0 × 10³ M/m³, whereas glass transition temperatures vary from approximately 69 to 82°C. The loss factor (tan ) curves show single peaks for all these biobased polyurethanes, thus indicating a single-phase system. The storage moduli (G) at 30°C range from 4 × 10⁸ to 1.3 × 10⁹ Pa. Upon postcure at 150°C, the thermomechanical properties can be optimized. Cross-link densities are improved significantly for hydroxyl content of 139 and 145 mg KOH/g at curing time of 24 h. Similarly, glass transition temperature (T_g) and storage moduli around and after T_g are increased. Meanwhile, tan intensities decrease as result of restricted chain mobility. Longer exposure time (24 h) induces thermal degradation, as evidenced by thermogravimetric analysis (TGA). The dynamic mechanical (DMA) analysis shows that postcure at 100°C for times exceeding 24 h also leads to improved properties. However, cross-linking densities are lower compared to postcure carried out at 150°C.     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

Effects of Lime and Ash Treatments on DOC Fractions and Low Molecular Weight Organic Acids in Soil Solutions of Acidified Podzolic Soils

Dissolved organic carbon (DOC) fractions and different low molecular weight organic acids (LMWOAs) were determined in soil solutions from two lime or ash treated Norway spruce sites in the south of Sweden. At Hasslöv, 3.45 t ha^-1 or 8.75 t ha^-1 dolomite were applied 15 years before sampling. Horröd was treated with 4.28 t ha^-1 ash and 3.25 t ha^-1 dolomite and sampled four years later. Propionate (7–268 M) and malonate (2–34 M) were the LMWOAsfound in the highest concentrations at Hasslöv. Two other LMWOAs dominated at Horröd, namely citrate (18–64 M)and fumarate (5–31 M). The differences in concentration of most of the determined LMWOAs at Hasslöv were significantly increased due to treatment. The LMWOAs comprised between 1.1–6.3% of the DOC at Hasslöv and 4.5–17.6% at Horröd. At Hasslöv normally 3–10% of the total acidity (TA) was due to LMWOAs and the average specific buffer capacity was 74 ± 22 mmol mol^-1C.The total DOC concentration in the mor layer solution was 16 mM for the dolomite treated plots compared to 10 mM at the untreated plot. A major part of the increase in DOC at the treated plots apparently had a hydrophobic character and was of high molecular weight corresponding to 3–10 kDa. The concentration of DOC < 1 kDa in the control and treated plots was similar.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.