Metal characterization of airborne particulate matters in a coastal region

The concentrations of suspended particulate matter in the air of the Orissa Sand Complex had an average value of 128 ± 10 µg m^?3 in residential areas and 170 ± 8 µg m^?3 in mining areas. PM₁₀ levels in residential areas were found to have an average of 35 ± 10 µg m^?3, in mining areas 45 ± 10 µg m^?3. The distribution of some elements is also discussed here. Inhalation doses were observed to be higher in summer than in winter and the rainy season. The highest dose rate was for the age group of 1 year, and health risks were found to be highest for the same. For adults, inhalation dose and health risk are 1.3 times higher in mining than in residential areas.     

PM<Subscript>2.5</Subscript> particulates and metallic elements (Ni,Cu, Zn,Cd and Pb) study in a mixed area of summer season in Shalu,Taiwan

PM_2.5 has become an important environmental issue in Taiwan during the past few years. Moreover, electricity increased significantly during the summertime and TTPP generated by coal burning base is the main electricity provider in central Taiwan. Therefore, summer season has become the main research target in this study. The ambient air concentrations of particulate matter PM_2.5 and PM₁₀ collected by using VAPS at a mixed characteristic sampling site were studied in central Taiwan. The results indicated that the average daytime PM_2.5 and PM₁₀ particulate concentrations were occurred in May and they were 44.75 and 57.77 µg/m³ in this study. The results also indicated that the average nighttime PM_2.5 and PM₁₀ particulate concentrations were occurred in June and they were 38.19 and 45.79 µg/m³ in this study. The average PM_2.5/PM₁₀ ratios were 0.7 for daytime, nighttime and 24-h sampling periods in the summer for this study. This value was ranked as the lowest ratios when compared to the other seasons in previous study. Noteworthy, the results further indicated that the metallic element Pb has the mean highest concentrations for 24-h, daytime and nighttime sampling periods when compared to those of the other metallic elements (Ni, Cu, Zn and Cd). The average mean highest metallic Pb concentrations in PM10 were 110.7, 203.0 and 207.2 ng/m³ for 24-h, daytime and nighttime sampling periods in this study. And there were 59.53, 105.2 and 106.6 ng/m³ for Pb in PM2.5 for 24-h, daytime and nighttime sampling periods, respectively. Moreover, the results further indicated that mean metallic element Pb concentrations on PM_2.5 and PM₁₀ were all higher than those of the other elements for 24 h, day and nighttime.     

Modelling concentrations of airborne primary and secondary PM10 and PM2.5 with the BelEUROS-model in Belgium

The Eulerian Chemistry-Transport Model BelEUROS was used to calculate the concentrations of airborne PM₁₀ and PM_2.5 over Europe. Both primary as well as secondary particulate matter in the respirable size-range was taken into account. Especially PM_2.5 aerosols are often formed in the atmosphere from gaseous precursor compounds. Comprehensive computer codes for the calculation of gas phase chemical reactions and thermodynamic equilibria between compounds in the gas-phase and the particulate phase had been implemented into the BelEUROS-model. Calculated concentrations of PM₁₀ and PM_2.5 are compared to observations, including both the spatial and daily, temporal distribution of particulate matter in Belgium for certain monitoring locations and periods. The concentrations of the secondary compounds ammonium, nitrate and sulfate have also been compared to observed values. BelEUROS was found to reproduce the observed concentrations rather well. The model was applied to assess the contribution of emissions derived from the sector agriculture in Flanders, the northern part of Belgium, to PM₁₀- and PM_2.5-concentrations. The results demonstrate the importance of ammonia emissions in the formation of secondary particulate matter. Hence, future European emission abatement policy should consider more the role of ammonia in the formation of secondary particles.     

Outdoor air particle-bound trace metals in four selected communities in Ibadan,Nigeria

Trace metal concentrations were determined in particulate matter (PM₁₀) in ambient air of four purposively selected residential areas in Ibadan, Nigeria namely Bodija market (BM), Ojo Park (OP), Oluyole Estate (OE) and University of Ibadan (UI). PM₁₀ was determined in the morning (7–10 a.m.) and afternoon (2–5 p.m.) for 12 weeks in the dry season months of January–March using a volumetric sampler following standard procedures and levels compared with WHO guideline limits. Glass-fibre filter papers exposed to the particulate matter were digested using appropriate acid mixtures, and the digest analysed for trace metals including Ni, Cr, Mn, Zn, and Pb using ICPMS method and levels compared with WHO limits. Data was analysed using ANOVA and Pearson correlation test at 5 % level of significance. The highest mean PM₁₀ concentrations 502.3 ± 39.9 μg/m³ were recorded in the afternoon period at BM, while the lowest concentration 220.6 ± 69.9 μg/m³ was observed in the morning hours at UI. There was a significant difference between the PM₁₀ levels across the various locations (p < 0.05), and all the levels were higher than WHO limit of 50 μg/m³. The highest levels of Ni, Zn and Pb were recorded at BM, which also had the highest PM₁₀ burden. The trend in Pb levels across the locations was BM > UI > OP > OE with the highest level 5.70 μg/m³ in BM nearly fourfolds WHO limits of 1.5 μg/m³. There was a significant correlation between PM₁₀ and Ni (p < 0.05).Urban communities with increased human activities especially motor traffic recorded both higher levels of PM₁₀ and toxic trace metals. There is need to carry out source apportionment to establish the origin of these trace metals in future studies.     

Oxidative potential (OP) and mineralogy of iron ore particulate matter at the Gol-E-Gohar Mining and Industrial Facility (Iran)

Concentrations of total suspended particulate matter, particulate matter with aerodynamic diameter <2.5 μm (PM_2.5), particulate matter <10 μm (PM₁₀), and fallout dust were measured at the Iranian Gol-E-Gohar Mining and Industrial Facility. Samples were characterized in terms of mineralogy, morphology, and oxidative potential. Results show that indoor samples exceeded the 24-h PM_2.5 and PM₁₀ mass concentration limits (35 and 150 µg m^?3, respectively) set by the US National Ambient Air Quality Standards. Calcite, magnetite, tremolite, pyrite, talc, and clay minerals such as kaolinite, vermiculite, and illite are the major phases of the iron ore PM. Accessory minerals are quartz, dolomite, hematite, actinolite, biotite, albite, nimite, laumontite, diopside, and muscovite. The scanning electron microscope structure of fibrous-elongated minerals revealed individual fibers in the range of 1.5 nm to 71.65 µm in length and 0.2 nm to 3.7 µm in diameter. The presence of minerals related to respiratory diseases, such as talc, crystalline silica, and needle-shaped minerals like amphibole asbestos (tremolite and actinolite), strongly suggests the need for detailed health-based studies in the region. The particulate samples show low to medium oxidative potential per unit of mass, in relation to an urban road side control, being more reactive with ascorbate than with glutathione or urate. However, the PM oxidative potential per volume of air is exceptionally high, confirming that the workers are exposed to a considerable oxidative environment. PM released by iron ore mining and processing activities should be considered a potential health risk to the mine workers and nearby employees, and strategies to combat the issue are suggested.     

Characterization of chemical species in universal sampler (PM2.5 and PM2.5–10) aerosols in suburban area of central Taiwan

Aerosol samples of particulate and chemical species for PM₁₀ (particulate matter with aerodynamic diameters less than 10 μm) collected by Universal sampler were studied from June to August 1998 in the suburban area of central Taiwan. The ratios of PM_2.5/PM_2.5–10 displayed that the fine particles (particle size < 2.5 μm) are prevailing in the suburban site. Ion Chromatography was used to analyze for the water‐soluble ions: sulphate and nitrate in the Universal samples. Also, the collected samples were analyzed by atomic absorption spectrophotometry for the elemental analysis of Ca, Fe, Pb, Cu and Cr. The results indicated that the crustal elements (Ca and Fe) and resuspended matters were dominated in the coarse particulate mode while the anthropogenic elements (Cr, Pb, Cu) and sulphate components are mainly in the fine particle fraction. The results also showed that the sulphate and nitrate make the largest portion of the chemical species collected by Universal sampler (PMio). The concentrations of heavy metals in THU are generally high, owing to the higher motor vehicle and industrial density nearby. The degree of pollution from this source differs from day to day, depending on the motor vehicle density.     

Atmospheric particulate matter in Nigerian megacities

The paucity of data on air pollution indices in Nigeria prompted us to commence a national screening exercise regarding particulate matter loads. Six potential megacities (Aba, Abuja, Lagos, Kano, Maiduguri, and Port-Harcourt) representing the six geographical zones in Nigeria were chosen for the study. Sampling was achieved using a ‘Gent’ stacked filter unit sampler capable of collecting fractions of particulate matter with sizes of <10-μm and <2.5-μm simultaneously. The mean values for PM₁₀ are 550, 35, 87, 340, 246 and 130 μg m^?3 while for PM_2.5 the mean values are 100, 14, 25, 67, 20 and 30 μg m^?3 respectively for Aba, Abuja, Lagos, Kano, Maiduguri, and Port-Harcourt. Except for Abuja, the daily PM₁₀ mass loads exceeded the World Health Organization (WHO) guidelines daily limit where as the PM_2.5 values were within the WHO guideline limit. Their correlation matrix result indicates that some PM_2.5 fractions mass fractions were strongly correlated than the PM₁₀ fractions probably due to their long range transport potentials. Further work is in progress to determine the elemental profiles of both particulate fractions collected.     

Cluster analysis of inorganic elements in particulate matter in the air environment of an equatorial urban coastal location

Concentrations of nine inorganic elements (Na, Zn, Ca, Fe, Ni, Mn, Cu, Cd and Al) in particulate matter (PM₁₀) in the air of an equatorial urban coastal location during 2009 were studied during summer and winter monsoon seasons using high-volume sampling techniques. Atomic absorption spectrophotometry was used to analyse the samples. The concentrations of most inorganic elements were higher during summer than winter, except for Cu and Zn. The main inorganic elements in PM₁₀ are Na, Zn and Ca. High concentrations of Na and Ca are due to marine aerosols. Analysis of enrichment factors showed that inorganic elements are from non-crustal sources. Cluster analysis identified five clusters in the summer and six in the winter: (1) PM₁₀–Ni, (2) Zn–Na, (3) Fe–Cu–Ca–Cd, (4) Mn and (5) Al for summer; and (1) PM₁₀, (2) Zn, (3) Fe–Ni, (4) Cu–Ca–Na–Cd, (5) Mn and (6) Al for winter. Combining both correlation and cluster analysis, it was found that Fe–Cu–Cd was from industry/vehicle emissions, Zn was from resuspended soil, Mn was from metallurgical processes, Ni was from a nearby power plant and Al was from crustal sources. Inorganic element concentrations could be a good indicator of local sources of PM₁₀.     

Air pollutant levels are 12 times higher than guidelines in Varanasi,India. Sources and transfer

Air quality in an urban atmosphere is regulated by both local and distant emission sources. For air quality management in urban areas, identification of sources and their relationships with local meteorology and air pollutants are essential. The critical condition of air quality in Indo-Gangetic plain is well known, but lack of data on both local and distant emission sources limits the scope of improving air quality in this region. Concentrations of particulate matter of size lower than 10 μm (PM₁₀) were assessed in the highly urbanized Varanasi city situated in middle Indo-Gangetic plain of India from 2014 to 2017, to identify the distant air pollution sources based on trajectory statistical models and local sources by conditional bivariate probability function. Modifying effects of meteorology and air pollutants on PM₁₀ were also explored. Mean PM₁₀ concentration for the study period was 244.8 ± 135.8 μg m^?3, which was 12 times higher than the WHO annual guideline. Several distinct sources of traffic as the major source of PM₁₀ were identified in the city. Trajectory statistical models like cluster analysis, potential source contribution function and concentration-weighted trajectory showed significant contributions from north-west and eastern directions in the transport of polluted air masses to the city. Dew point, wind speed, temperature and ventilation coefficient are the major factors in PM₁₀ formation and dispersion.     

Elemental composition of particulate matters around Urmia Lake,Iran

Atmospheric particulate matters and their elements were concurrently measured at two sites located in the north and southeast parts of Urmia Lake from January to September 2013. At both sampling sites, average concentrations of total suspended particulate, particles with the aerodynamic diameter of smaller than 10 µm, smaller than 2.5 µm, and smaller than 1 µm were 260 ± 106, 180 ± 73, 30 ± 8, and 25 ± 7 µg m^?3, respectively. The analyzed water soluble ions accounted for approximately 11%–13% mass concentrations of total suspended particulate and 8%–9% of particles smaller than 10 µm, and the sum of the concentrations of the analyzed elements associated with both ranged from 9 to 41 µg m^?3 (6.5%–9.6% in mass) and 7 to 26 µg m^?3 (5.5%–11.3% in mass), respectively. Thus, particulate matter was composed of a complex mixture of minerals such as halite, quartz, gypsum, hexahydrite, and Bassanite.     

Characteristics,sources and health risk assessment of toxic heavy metals in PM<Subscript>2.5</Subscript> at a megacity of southwest China

Twenty trace elements in fine particulate matters (i.e., PM_2.5) at urban Chengdu, a southwest megacity of China, were determined to study the characteristics, sources and human health risk of particulate toxic heavy metals. This work mainly focused on eight toxic heavy metal elements (As, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The average concentration of PM_2.5 was 165.1 ± 84.7 µg m^?3 during the study period, significantly exceeding the National Ambient Air Quality Standard (35 µg m^?3 in annual average). The particulate heavy metal pollution was very serious in which Cd and As concentrations in PM_2.5 significantly surpassed the WHO standard. The enrichment factor values of heavy metals were typically higher than 10, suggesting that they were mainly influenced by anthropogenic sources. More specifically, the Cr, Mn and Ni were slightly enriched, Cu was highly enriched, while As, Cd, Pb and Zn were severely enriched. The results of correlation analysis showed that Cd may come from metallurgy and mechanical manufacturing emissions, and the other metals were predominately influenced by traffic emissions and coal combustion. The results of health risk assessment indicated that As, Mn and Cd would pose a significant non-carcinogenic health risk to both children and adults, while Cr would cause carcinogenic risk. Other toxic heavy metals were within a safe level.     

Airborne fine particulate matter (PM2.5) at industrial,high- and low-density residential sites in a Nigerian megacity

Abstract

Airborne particulate matter PM_2.5 was collected in an industrial, a low-density, and a high-density residential area of Lagos from December 2010 to November 2011, and elemental composition was determined by proton-induced X-ray emission. Across the months, mass concentrations ranged from 13 to 237?µg?m^?3, exceeding the World Health Organization guideline value of 10?µg?m^?3. Data on 24 elements were obtained, with maximum values during Harmattan season months; source identification and apportionment studies by positive matrix factorization suggested that petroleum oil combustion (70%) was the major source of PM_2.5 and could pose a great hazard to Lagos receptors.     

Dependency of polycyclic aromatic hydrocarbon concentrations on particle size distribution in Tehran atmosphere

In this work, the airborne particulate matter with an aerodynamic diameter less than 10 µm (PM₁₀) was fractionated in a six-stage high-volume cascade impactor to identify particulate size distribution in Tehran atmosphere. The study was conducted at 15 sites located in the north, south, east, west, and central parts of Tehran in 2005. Air samples were analyzed for 16 polycyclic aromatic hydrocarbons (PAHs) by HPLC. The daily PM₁₀ concentrations at the peak of traffic in roadside areas were found to be 106–560 µg m^?3. The cumulated concentration sum of PAHs, based on 16 species, was found to have an average concentration of 380 ng m^?3. Furthermore, it was found that more than 60% of PAHs belonged to the small particulate size range, having sizes of less than 0.49 µm, some containing benzo(ghi)perylene and indeno(123cd)pyrene (high molecular weight) with average concentrations of 8 and 6 ng m^?3 and fluorene, phenanthrene, and fluoranthene (low molecular weight) with average concentrations of 14, 13, and 19 ng m^?3, respectively. In addition, the results revealed that the lighter three- and four-ring PAH compounds were the most abundant pollutants in the air collected at all the sampling sites.     

World air particulate matter: sources,distribution and health effects

Particulate matter (PM) is both a major driver of climate change and a source of toxicity for health. In the upper atmosphere, particulate matter modifies the earth radiation budget, cloud formation and acts as a reaction center for air pollutants. In the lower atmosphere, particulate matter changes atmospheric visibility and alters biogeochemical cycles and meteorology. Most critical effects are observed in ambient air, where particulate matter degrades human health. Here we review the sources, spatial and temporal variability, and toxicity of PM₁₀, the particulate matter having particle sizes 10 micrometers or less in diameter, in world regions. For that we analyzed information from the world wide web and databases from government organizations after the year 2000. Findings show that PM₁₀ is a major risk in both developed and developing countries. This risk is more severe in Asian countries compared to Europe and USA, where decreasing trends are recorded during the last two decades. Meteorological factors modify particulate matter variations at local and regional levels. PM_2.5/PM₁₀ ratio provides information of particulate matter sources under different environment conditions. Crustal matter, road traffic and combustion of fuels are major sources of particulate matter pollution. Health studies indicate that long-term exposure to particulate matter has multiple health effects in people from all age groups. Identification of possible sources and their control with regular epidemiological monitoring could decrease the impact of particulate matter pollution.     

High seasonal variation of atmospheric C and particle concentrations in Delhi,India

The highly populated Indian regions are currently in a phase of rapid economic growth resulting in high emissions of carbonaceous aerosols. This leads to poor air quality and impact on climate. The chemical composition of carbonaceous aerosols has rarely been studied in industrial areas of India. Here, we investigated carbonaceous aerosols in particulate matter (PM) monthly in the industrial area of Delhi in 2011. The concentrations of organic C and elemental C in PM₁₀ fraction were analyzed. Results show a clear seasonal variability of organic and elemental C. PM₁₀ ranged 95.9–453.5 μg m^?3, organic C ranged 28.8–159.4 μg m^?3, and elemental C ranged 7.5–44.0 μg m^?3; those values were higher than reported values. Organic and elemental C were correlated with each other in pre-monsoon and winter seasons, implying the existence of similar emission sources such as coal combustion, biomass burning and vehicular exhaust. The annual average contribution of total carbonaceous aerosols in PM₁₀ was estimated as 62 %.     

Characterization and distribution of mineral content in fine and coarse airborne particle fractions by neutron activation analysis∗

Nowadays, much attention is devoted to the study of toxic elements at trace and sub-trace levels in the investigation of particulate matter composition, especially in PM₁₀ and PM_2.5. Furthermore, it should be considered that the behavior knowledge is an other important task for understanding such species. Finally, the determination of particular elements with a few data in literature can assume relevant importance in industrial processes (Pd, Rh, Ir, etc. for catalytic pot, Sm, Ce, Eu, etc. for optical fibers and electronic process). In this article, we apply a nuclear technique, i.e. Instrumental Neutron Activation Analysis, for the study of metal composition in fine and coarse fractions. This nuclear technique allows the determination of about 25 elements: for some of them, this is the first determination in the ambient air of Rome. The investigation was performed in a reserved area in downtown Rome during a 15-day intensive campaign. The sampled filters were irradiated at the nuclear reactor Triga Mark II (ENEA-Casaccia Laboratories) at neutron flux of 2.6?×?10¹²?n?cm^?2?s^?1 for 32.55?h. The measurements of the γ-ray allow the qualitative and quantitative analysis. The element levels in fine and coarse fractions will be shown with the correlations among some elements being more interesting in the toxicological field: basically, the concentrations are very low.     

Exposure assessment,chemical characterization and source identification of PM2.5 for school children and industrial downwind residents in Guangzhou,China

To assess the exposure doses of PM_2.5 and to investigate its chemical components for the subpopulation (i.e., school children and industrial downwind residents), simultaneous sampling of indoor and outdoor PM_2.5 was conducted at an elementary school close to traffic arteries and a residence located in the downwind area of a steel plant in metropolitan Guangzhou in 2010. Chemical components, i.e., organic carbon, elemental carbon and 6 water soluble ions were analyzed in PM_2.5. A survey was also conducted to investigate the time-activity patterns of the school children and the industrial downwind residents. Indoor and outdoor PM_2.5 were 63.2 ± 20.1 and (76.7 ± 35.8) μg/m³ at the school, and 118.8 ± 44.7 and 125.7 ± 57.1 μg/m³ in the community, respectively. Indoor PM_2.5 was found to be highly related to outdoor sources, and stationary sources were the significant contributors to PM_2.5 at both sites. The daily average doses of PM_2.5 for the school children at the school (D _children) and the industrial downwind residents in the community (D _residents) were (7.6 ± 1.9) and (36.1 ± 36.8) μg/kg-day, respectively. The daily average doses of particulate organic mass and SO₄ ^2? were the two most abundant chemical components in PM_2.5. PM_2.5 exposure for the school children was contributed by indoor and outdoor environments by 48.8 and 51.2 %, respectively; for the industrial downwind residents, the contributions were 66.0 and 34.0 %, respectively. Age and body weight were significantly and negatively correlated with D _children, while age, body weight and education level were significantly and negatively correlated with D _residents; gender was not a significant factor at both cases.     

Air pollution below WHO levels decreases by 40 % the links of terrestrial microbial networks

Air pollution has a deleterious impact on public health and the environment. There is few knowledge on the effect of air pollution on terrestrial microbial communities, despite the major role of microbes in ecosystems. Here, we designed an in situ trial ecosystem to assess the impact of moderate atmospheric pollution, below World Health Organization (WHO) thresholds, on an indigenous microbial communities, including bacteria, fungi, ciliates, algae, cyanobacteria, testate amoebae, rotifers and nematodes, extracted from terrestrial bryophytes. These micro-ecosystems were placed at a rural, an urban and an industrial site in France and were thus exposed to various levels of nitrogen dioxide (NO₂), from 6.6–67.9 μg·m^?3, and particulate matter, from 0.7–7.9 μg·m^?3. Microbial analysis was performed by microscopy. We determined atmospheric temperature, relative humidity and particulate matter with diameter lower than 10 µm (PM₁₀), Cu, Cr, Fe, Ni, Pb, Zn in PM₁₀, and (NO₂). Results show a significant impact of chronic moderate exposure to NO₂ and copper Cu-associated particulate matter on the global microbial network complexity. This is evidenced by a loss of about 40 % of microbial co-occurrence links during incubation. Most lost microbial links are ecologically positive links. Moreover, most changes in community co-occurrence networks are related to testate amoebae, a major top predator of microbes. Overall, our findings demonstrate that air pollution can have strong deleterious effects on microbial interactions, even at levels below WHO thresholds.     

Platinum in PM2.5 of the metropolitan area of Mexico City

The increase in platinum (Pt) in the airborne particulate matter with size ≤2.5 µm (PM_2.5) in urban environments may be interpreted as result of the abrasion and deterioration of automobile catalyst. Nowadays, about four million vehicles in Mexico City use catalytic converters, which means that their impact should be considered. In order to evaluate the contribution of Pt to environmental pollution of the metropolitan area of Mexico City (MAMC), airborne PM_2.5 was collected at five different sites in the urban area (NW, NE, C, SW, SE) in 2011 during April (dry-warm season), August (rainy season) and December (dry-cold season). Analytical determinations were carried out using a ICP-MS with a collision cell and kinetic energy discrimination. The analytical and instrument performance was evaluated with standard road dust reference material (BCR-723). Median Pt concentration in the analyzed particulate was is 38.4 pg m^?3 (minimal value 1 pg m^?3 maximal value 79 pg m^?3). Obtained Pt concentrations are higher than those reported for other urban areas. Spatial variation shows that SW had Pt concentration significantly higher than NW and C only. Seasonal variation shows that Pt median was higher in rainy season than in both dry seasons. A comparison of these results with previously reported data of PM₁₀ from 1991 and 2003 in the same studied area shows a worrying increase in the concentration of Pt in the air environment of MAMC.     

Trace element concentration in fine particulate matter (PM<Subscript>2.5</Subscript>) and their bioavailability in different microenvironments in Agra,India: a case study

Exposure to airborne particulate matter results in the deposition of millions of particle in the lung; consequently, there is need for monitoring them particularly in indoor environments. Case study was conducted in three different microenvironments, i.e., urban, rural and roadside to examine the elemental bioavailability in fine particulate matter and its potential health risk. The samples were collected on polytetrafluoroethylene filter paper with the help of fine particulate sampler during August–September, 2012. The average mass concentration of PM_2.5 was 71.23 µg m^?3 (rural), 45.33 µg m^?3 (urban) and 36.71 µg m^?3 (roadside). Elements in PM_2.5 were analyzed by inductively coupled plasma atomic emission spectroscopy. Percentage bioavailability was determined to know the amount of soluble fraction that is actually taken across the cell membrane through inhalation pathway. Cadmium and lead were found to have cancer risk in a risk evaluation using an Integrated Risk Information system.