A review of biofouling and its control in membrane separation bioreactors.

Membrane separation technology is increasingly becoming an important innovation in biological wastewater treatment. Biofouling of the membrane is a major factor affecting the efficient and economic operation of membrane separation bioreactors (MBRs). This review summarizes the state-of-the-art progress in understanding the mechanisms and factors affecting membrane biofouling and the strategies for biofouling control. Biofouling mechanisms include the adsorption of soluble and suspended extracellular polymers on membrane surfaces and in membrane pores, the clogging of membrane pore structure by fine colloidal particles and cell debris, and the adhesion and deposition of sludge cake on membrane surfaces. Design and operating conditions of membrane modules and materials, hydrodynamic conditions in MBRs, process and environmental conditions of activated sludge systems, and the physicochemical properties of the wastewater are the dominant factors determining membrane biofouling. Current strategies to control biofouling include periodic relaxation, backwashing, chemical cleaning, and possible manipulation of hydrodynamic conditions and sludge properties. Achieving full integration of MBRs in wastewater treatment technology requires further research and development. Fundamental information on the bacteria, colloid, and membrane interaction, developed through multimethod and multiscale approaches, is particularly needed.     

A comparison of the physical, chemical, and biological properties of sludges from a complete-mix activated sludge reactor and a submerged membrane bioreactor.

The properties of sludges from a pilot-scale submerged membrane bioreactor (SMBR) and two bench-scale complete-mix, activated sludge (CMAS) reactors treating municipal primary effluent were determined. Compared with the CMAS sludges, the SMBR sludge contained a higher amount of soluble microbial products (SMP) and colloidal material attributed to the use of a membrane for solid-liquid separation; a higher amount nocardioform bacteria, resulting from efficient foam trapping; and a lower amount of extracellular polymeric substances (EPS), possibly because there was no selective pressure for the sludge to settle. High aeration rates in both the CMAS and SMBR reactors produced sludges with higher numbers of smaller particles. Normalized capillary suction time values for the SMBR sludge were lower than for the CMAS sludges, possibly because of its lower EPS content.     

Prediction of membrane fouling using artificial neural networks for wastewater treated by membrane bioreactor technologies: bottlenecks and possibilities

Membrane fouling is a major concern for the optimization of membrane bioreactor (MBR) technologies. Numerous studies have been led in the field of membrane fouling control in order to assess with precision the fouling mechanisms which affect membrane resistance to filtration, such as the wastewater characteristics, the mixed liquor constituents, or the operational conditions, for example. Worldwide applications of MBRs in wastewater treatment plants treating all kinds of influents require new methods to predict membrane fouling and thus optimize operating MBRs. That is why new models capable of simulating membrane fouling phenomenon were progressively developed, using mainly a mathematical or numerical approach. Faced with the limits of such models, artificial neural networks (ANNs) were progressively considered to predict membrane fouling in MBRs and showed great potential. This review summarizes fouling control methods used in MBRs and models built in order to predict membrane fouling. A critical study of the application of ANNs in the prediction of membrane fouling in MBRs was carried out with the aim of presenting the bottlenecks associated with this method and the possibilities for further investigation on the subject.     

Removal of tetrabromobisphenol A by conventional activated sludge, submerged membrane and membrane aerated biofilm reactors

The goal of this study was to compare removal efficiencies of tetrabromobisphenol A (TBBPA) using typical wastewater treatment technologies, and to identify the most significant mechanisms of removal. Two types of municipal wastewater reactors were studied: a full-scale conventional activated sludge (CAS) reactor with tertiary treatment; and three pilot-scale membrane bioreactors (MBRs) having different sludge retention times (SRTs). All four reactors were fed the same influent. A third reactor type, a membrane aerated biofilm reactor (MABR) was fed tap water, ammonia, and TBBPA. TBBPA in municipal influent ranged from 1 to 41 ng L⁻¹ (n = 10). The CAS effluent had an average TBBPA concentration of 0.7 ± 1.3 ng L⁻¹ (n = 3). Effluent concentrations from the MBRs were an average of 6 ± 6 ng L⁻¹ TBBPA (n = 26). Significant TBBPA removal was observed in the MABR throughout the 5 week of study (p ? 0.05). Removal of TBBPA from wastewater treatment was found to be due to a combination of adsorption and biological degradation. Based on experimental results, nitrification is likely a key process therein. No significant relationship between removal of TBBPA and SRT was identified (p ? 0.05).     

膜生物反应器次临界通量运行的膜污染特性研究

膜生物反应器（MBR）是将膜分离与生物反应相结合的污水处理新工艺,近年来已引起广泛的关注,但不可避免的膜污染限制其更广泛的应用。临界通量在膜污染控制中是个非常重要的概念。本试验研究平板膜生物反应器在次临界通量运行下的膜污染状况,并结合膜污染模型进一步表征膜表面的污染特性。试验结果表明。该平板膜生物反应器在次临界通量运行的情况下,膜污染可分为膜污染缓慢发展阶段（第Ⅰ阶段）和膜污染迅速发展阶段（第Ⅱ阶段）,可分别用膜孔堵塞模型和泥饼阻力模型表征膜阻力与时间的变化关系。同时,对运行后的膜阻力分布进行分析,表明泥饼阻力和孔道吸附堵塞阻力是膜污染的主要组成部分,分别占到总阻力的73％和24％,而膜本身阻力仅占3％。     

Evaluation of membrane bioreactor process capabilities to meet stringent effluent nutrient discharge requirements.

A six-stage membrane bioreactor (MBR) pilot plant was operated to determine and demonstrate the capability of this process to produce a low-nutrient effluent, consistent with the nutrient reduction goals for the Chesapeake Bay. Biological nitrogen removal was accomplished using a multistage configuration with an initial anoxic zone (using the carbon in the influent wastewater), an aerobic zone (where nitrification occurred), a downstream anoxic zone (where methanol was added as a carbon source), and the aerated submerged membrane zone. The capability to reliably reduce effluent total nitrogen to less than 3 mg/L as nitrogen (N) was demonstrated. A combination of biological (using an initial anaerobic zone) and chemical (using alum) phosphorus removal was used to achieve effluent total phosphate concentrations reliably less than 0.1 mg/L as phosphorus (P) and as low as 0.03 mg/L as P. Alum addition also appeared to enhance the filtration characteristics of the MBR sludge and to reduce membrane fouling. Aeration of the submerged membranes results in thickened sludge with a high dissolved oxygen concentration (approaching saturation), which can be recycled to the main aeration zone rather than to an anoxic or anaerobic zone to optimize biological nutrient removal. Biological nutrient removal was characterized using the International Water Association Activated Sludge Model No. 2d. The stoichiometry of chemical phosphorus removal was also consistent with conventional theory and experience. The characteristics of the solids produced in the MBR were compared with those of a parallel full-scale conventional biological nitrogen removal process and were generally found to be similar. These results provide valuable insight to the design and operating characteristics of MBRs intended to produce effluents with very low nutrient concentrations.     

Use of chemical coagulants to control fouling potential for wastewater membrane bioreactor processes.

Chemical coagulation with ferric chloride, alum, and an organic polymer were used to control the fouling potential of mixed liquors for submerged membrane bioreactor (MBR) processes in treating municipal wastewater. Their filterability was evaluated using a submerged hollow fiber ultrafiltration apparatus operated in constant permeate flux mode. The collected transmembrane pressures over filtration time were used to calculate the membrane fouling rates. The results showed that coagulation pretreatment can reduce fouling rates when MBRs were operated above the critical flux. Even though coagulation with the organic polymer formed larger mixed liquor suspended solids particles and had shorter time-to-filtration than those with ferric chloride and alum, the filterability for membrane filtration were similar, indicating that the membrane fouling in MBR systems was mainly controlled by the concentration of smaller colloidal particles.     

微磁场条件下pH冲击对微氧活性污泥表面性质的影响

研究了微磁场条件下pH冲击对处理低负荷葡萄糖废水的微氧活性污泥表面性质的影响。在pH=6.0和9.0的条件下对添加磁粉和无磁粉反应器微氧活性污泥进行15 d的冲击,而后调整pH=7.5进行5 d的恢复实验。对pH冲击下污泥絮凝能力FA、疏水性RH和表面电荷SC的变化情况进行考察,结果表明,有磁粉反应器的各项指标均优于无磁粉反应器。经过5 d的恢复实验,添加磁粉反应器污泥的各指标均能恢复到接近初始值,而无磁粉反应器污泥难以恢复到接近初始值。     

污水处理中几种去除药物及个人护理用品方法的机理及效果比较

目前广泛分布在环境中的药物及个人护理品（pharmaceuticals and personal care products, PPCPs）在环境中的迁移、转化和处理已成为环境科学与工程研究的一个新的领域。污水处理厂排水是PPCPs进入环境中的主要途径。介绍了污水处理过程中传统活性污泥法、膜处理技术以及氧化处理等主要工艺对PPCPs的去除机理，并对去除效果进行了比较。以传统活性污泥法及在其改进后的膜处理技术为基础的大部分现有污水处理厂只能够去除一部分PPCPs，并且主要通过吸附（如对于吐纳麝香、佳乐麝香、萨利麝香等脂溶性较高的有机物）和生物降解作用（如对于布洛芬，17β-雌二醇，雌酮等易反应的有机物）。然而，吸附了PPCPs的污泥通过土壤施肥又将PPCPs带入土壤中，进而会渗滤到地下水，或随径流水进入地表水中。因此，PPCPs并没有从根本上得以去除。相比之下氧化处理工艺（如氯化、臭氧氧化、紫外辐射）或这些工艺的组合能够将大部分的PPCPs进行氧化，去除效果明显优于以上2种技术。然而，氧化后产物的种类和毒理性需要更深入的研究。     

Inocula from activated sludge for ready biodegradability testing: homogenization by preconditioning

The use of activated sludge as inoculum source in ready biodegradability tests (RBT) suffers from several drawbacks related to the heterogeneity of these communities. In this work, the ability of a 7-day aeration period in a mineral medium to homogenize the characteristics of various activated sludges, as suggested by some RBT, was studied. The biodegradation potential of three activated sludge supernatants obtained from different wastewater treatment plants was assessed in terms of cultivable cell density, dehydrogenasic activity and a profile of hydrolytic enzymes. After the preconditioning, the homogenization of these characteristics in the supernatants was observed, as well as a decrease. When preconditioned inocula were used in acetate RBT, the biodegradation kinetics were homogenized. However, some preconditioned supernatants lost their ability to degrade an easily-assimilable xenobiotic compound (aniline) during the observation period, showing the effect of inoculum preconditioning on the behavior of complex bacterial communities, specialist populations (e.g. aniline degraders) being more sensitive than generalist populations (e.g. acetate degraders). These results show that preconditioning cannot be an optional inoculum pretreatment in RBT, and emphasize the importance of further studies focusing on inoculum homogenization.     

好氧颗粒污泥用于膜污染的控制

膜生物反应器在运行过程中容易引起严重的膜污染,从而限制了膜生物反应器在实际废水处理工程中的应用.从污泥特性角度分析了好氧颗粒污泥的特点和减缓膜污染的原因,并且与活性污泥比较,提出好氧颗粒污泥减缓膜污染的优势,为膜污染的控制提出了新的思路和方法.     

Use of acid preconditioning for enhanced dewatering of wastewater treatment sludges from the pulp and paper industry.

In municipal and industrial practices, wastewater treatment sludges are generally conditioned with organic polymers before dewatering. The dewatering polymers are expensive and contribute significantly to the overall sludge management cost. This paper discusses a preconditioning strategy that holds great promise for enhancing dewatering properties of wastewater treatment sludges, while reducing the cost. In this approach, the waste activated sludge (WAS) is briefly preconditioned with an acid before flocculating with an organic polymer. Experimental results showed that acid preconditioning significantly enhanced dewatering. Separately acidifying WAS and subsequently combining it with primary sludge produced higher presscake solids than acidifying the combined sludge to the same final pH. Acidification exhibited the added benefit of reducing Escherichia coli counts in sludge, thus improving its biological character. This may provide flexibility in choosing a beneficial use application.     

投加氢氧化铁对SMBR中膜污染的防治

通过向浸没式膜生物反应器(简称SMBR)中投加氢氧化铁絮体,经过驯化后,进而形成生物铁污泥,来实现膜污染的防治。在对模拟印染废水的处理过程中,从操作压力变化、膜污染电镜照片、污泥显微镜照片、污泥粒径分布等测定和观察结果来看,投加氢氧化铁絮体后增加了膜水通量,减小了膜污染。在机理上对此进行了详细的分析.     

改性PES膜在MBR中膜阻力分析及膜污染机理研究

以聚醚砜(PES)、醋酸纤维素(CA)和纳米二氧化钛(TiO2)为膜材料,采用L-S相转化法制备共混改性PES膜。在24℃、0.2 MPa的操作条件下,制得的PES膜纯水通量为300 L/(m2.h)左右,CA改性PES膜为660 L/(m2.h)左右,TiO2改性PES膜为840 L/(m2.h)左右。通过膜生物反应器中膜阻力的测定,表明膜污染主要由浓差极化层及凝胶层引起的;通过活性污泥对膜污染机理的研究,判断出污泥的过滤过程基本符合沉积过滤定律。在MBR中运行时,改性PES膜稳定通量高于未改性膜,总阻力低于未改性膜;TiO2改性膜稳定通量高于CA改性膜,总阻力低于CA改性膜;通过扫描电镜分析,改性PES膜沉积层的厚度均比未改性膜薄,TiO2改性膜沉积层厚度小于CA改性膜,表明改性膜的抗污染性能提高了,TiO改性膜抗污染性能更优。     

Effect of membrane type and material on performance of a submerged membrane bioreactor

This study evaluated the impact of membrane type and material on filtration performance in a submerged membrane bioreactor (MBR) for municipal wastewater treatment. Three types of microfiltration membranes with similar pore size of 0.1 microm but different materials and types, phase-inversed polytetrafluoroethylene (PTFE), track-etched polycarbonate (PCTE) and track-etched polyester (PETE), were used. Changes in permeability with time for the PCTE and PTFE membranes appeared similarly, whereas the PETE membrane exhibited the most rapid flux decline. Lower TOC in the permeate compared to the supernatant was probably due to a combination of biodegradation by the biofilm (cake layer) developed on the membrane surface and further filtration by cake layer and narrowed pores. The faster permeability decline and higher TOC removal rate of the PETE membrane were attributed to an initial permeate flux higher than an average design flux, which led to a faster rate of fouling and thicker cake layer. Therefore, an MBR should not be operated at a flux higher than the average design flux for a specific type of membrane. A gradual increment of biomass concentration did not significantly affect membrane permeability of each membrane investigated. Dissolved organic carbon fractionation results showed that the composition of each fraction between the supernatant and permeates did not change significantly with time, suggesting that membrane hydrophobicity was not a dominant factor affecting MBR fouling in this study. The organic foulants desorbed from the PCTE membrane contained approximately 60% of hydrophobic fraction, which was probably attributable to the extracellular polymeric substances proteins released from the biomass attached to the membrane. While the total filtration resistance of the PTFE membrane was influenced by a higher surface roughness, those of the PETE and PCTE membranes, which had a similar and lower roughness, were affected by the initial operating flux.     

Effect of mean cell residence time on the performance and microbial diversity of pre-denitrification submerged membrane bioreactors

The effect of mean cell residence time (MCRT) (5, 8.3, 16.7, and 33.3d) on domestic wastewater treatment performance had been investigated using four bench-scale pre-denitrification submerged membrane bioreactors (MBR) operated in parallel. The 33.3-d MCRT MBR had the lowest microbial activities in terms of specific oxygen uptake rate, specific denitrification rate and observed sludge yield. Excellent COD removal efficiency (more than 95%) and nitrification (more than 97%) were observed in all the four MBRs investigated. Even though high nitrification can be achieved in all the MBRs, total nitrogen (TN) removal efficiency was found to be affected by MCRT with a maximum of 77% at 33.3-d MCRT. Better TN removal efficiency achieved in the 33.3-d MCRT MBR was due to the combined effect of high mixed liquor concentration and lower dissolved oxygen concentration in the recycled mixed liquor. A comparison of terminal-restriction fragment length polymorphisms (T-RFLP) fingerprints based on 16S rRNA and nirS gene revealed that the microbial communities of 5- and 8.3-d MCRT are grouped under the same branch while 16.7- and 33.3-d MCRT are grouped in another branch. T-RFLP based on amoA gene shows that members from the Nitrosomonas genus were more dominant under shorter MCRT operating environment. Clustering analysis did not show any correlation with the organic and nitrogen removal performance obtained in this study.     

好氧颗粒污泥动态膜生物反应器工艺参数及运行性能

以一体式尼龙筛网动态膜生物反应器(DMBR)为研究体系,与好氧颗粒污泥相结合,形成新的好氧颗粒污泥动态膜生物反应器(AGDMBR),探讨了在新工艺条件下对COD、氨氮的去除,以及出水浊度的变化,与活性污泥动态膜生物反应器(DMBR)做比较,研究了进水流量、曝气量等工艺运行参数与膜污染之间的关系,并对系统中污泥的EPS进行分析。结论表明,AGDMBR系统对COD和NH4+-N的平均去除率分别为91%和95%,出水浊度为6 NTU,处理效果均优于DMBR系统;AGDMBR系统在运行过程中膜污染速度随进水流量的增大而加快;曝气量为125～150 L/h时,膜通量持续时间最长;AGDMBR系统比DMBR系统在膜污染的延缓上具有明显的优势。     

A modeling study of fouling development in membrane bioreactors for wastewater treatment.

Membrane fouling is a primary concern in membrane bioreactors (MBRs) in wastewater treatment because it strongly affects both system stability and economic feasibility. A mathematical model was developed in this study for membrane fouling in submerged MBR systems for wastewater treatment, in which both reversible and irreversible fouling were quantified. While mixed liquor suspended solids are the major components of the reversible fouling layer, dissolved organic matter is thought to be the key foulant, in particular, responsible for the long-term irreversible fouling of the filtration unit. The model was calibrated (parameter identification) with a set of operational data from a pilot MBR and then verified with other independent operational data from the MBR. The good agreement between theoretical predictions and operational data demonstrates that the outlined modeling concept can be successfully applied to describe membrane fouling in submerged MBR systems.     

PVDF/PMMA与PVDF/TPU共混膜抗污染性能研究及应用

观察新型五孔PVDF共混改性纤维膜SEM形貌特征,采用逐级通量法测定PVDF/PMMA和PVDF/TPU共混改性膜的临界通量,研究在次临界和超临界通量下A(PVDF/PMMA)与B(PVDF/TPU)2种管式膜组件的过滤和抗污染性能,并在次临界通量下处理地表水。结果表明,PVDF共混改性膜具有优良的微观结构,且膜B性能较好;膜A、B的临界通量分别为12 L/(m2.h)和10 L/(m2.h);膜组件B比膜组件A抗污染性能好。次临界通量下膜组件的运行比超临界通量下的稳定。与采用单独超滤处理某市地表水相比,2种膜组件采用混凝+超滤工艺的运行处理效果更好,且膜组件B比膜组件A处理效果佳。     

Phenol degradation and microbial characteristics in upflow anaerobic sludge blanket reactors at ambient and mesophilic temperatures

A synthetic wastewater containing phenol as sole substrate was respectively treated at temperatures of 26±1°C and 37±1°C in 2.8 litre upflow anaerobic sludge blanket (UASB) reactors. At the two temperatures, pH 7.0–7.5, with a 1:1 effluent recycle ratio, phenol in wastewater was efficiently degraded in a UASB reactor. Microbial community analysis using denaturing gradient gel electrophoresis (DGGE) showed that less shift in the microbial community occurred with the temperature changing. Phenol degradation in wastewater was recommended to select ambient temperature in UASB reactors. The optimal HRT was 12 to 16 hours corresponding to 6.0–4.5 g COD/(l.d) loading rate at ambient temperature in UASB reactors. The distribution of archaeal and bacterial populations in the UASB granular consortium was revealed using fluorescence in situ hybridisation (FISH) technique.