Influencing factors of carbon emissions and their trends in China and India: a machine learning method

China and India are the largest coal consumers and the most populated countries in the world. With industrial and population growth, the need for energy has increased, which has inevitably led to an increase in carbon dioxide (CO₂) emissions because both countries depend on fossil fuel consumption. This paper investigates the impact of energy consumption, financial development (FD), gross domestic product (GDP), population, and renewable energy on CO₂ emissions. The study applies the long short-term memory (LSTM) method, a novel machine learning (ML) approach, to examine which influencing driver has the greatest and smallest impact on CO₂ emissions; correspondingly, this study builds a model for CO₂ emission reduction. Data collected between 1990 and 2014 were analyzed, and the results indicated that energy consumption had the greatest effect and renewable energy had the smallest impact on CO₂ emissions in both countries. Subsequently, we increased the renewable energy coefficient by one and decreased the energy consumption coefficient by one while keeping all other factors constant, and the results predicted with the LSTM model confirmed the significant reduction in CO₂ emissions. Finally, this study forecasted a CO₂ emission trend, with a slowdown predicted in China by 2022; however, CO₂ emission’s reduction is not possible in India until 2023. These results suggest that shifting from nonrenewable to renewable sources and lowering coal consumption can reduce CO₂ emissions without harming economic development.

     

Use of Energy Scenarios in Addressing the CO2 Question

A reference scenario for CO₂ emissions was developed using a model of world energy supply and demand. In the reference scenario, world GNP and world energy demand increase at average rates of 2.1 percent per year and 1.5 percent per year, respectively during the period 1975-2100. The corresponding annual CO₂ emissions rise to a maximum of 16 gigatons of carbon around 2050 and then decline as a result of a transition to nonfossil fuel energy systems. A modified scenario for high CO₂ emissions was obtained by assuming an abundant supply of low cost coal, thus eliminating the transition. A low case was developed in which the low cost of alternative energy (i.e., solar, nuclear) induces an earlier shift away from fossil fuels.

Annual emissions of the three scenarios were used as input to a global carbon cycle model and the CO₂ buildup in the atmosphere during the period 1980-2100 was determined by the model. All three scenarios showed continuous rises in atmospheric CO₂ concentration. The reference scenario reached 775 ppm by 2100. The high CO₂ case resulted in concentrations of over 1040 ppm, and for the low case the 2100 concentration was just under 700 ppm. If the climate theory is correct, even 700 ppm is sufficient to give significant climate warming, but by experiencing the change gradually over a century, adaptation may not be painful. An early transition to nonfossil fuel supplies makes the problem less severe but does not eliminate it.     

European Community Can Reduce CO2 Emissions by Sixty Percent: A Feasibility Study

Carbon dioxide (CO₂,) emissions in the European Community (EC) can be reduced by roughly 60 percent. A great many measures need to be taken to reach this reduction, with a total annual cost of ECU 55 milliard. Fossil fuel use is the main cause of CO2 emissions into the atmosphere; CO₂ emissions are to a large extent responsible for the greenhouse effect. Energy saving (conservation) and nuclear energy appear to be the least expensive methods of CO₂, abatement, directly followed by renewables. More expensive alternatives include the separation of CO₂, at the source (e.g., power plants), followed by storage in depleted gas fields, aquifers, or in the ocean. Biological options, such as reforestation and energy farming, are the most expensive abatement methods; however, they do have secondary advantages, such as avoided fallow premiums and avoided export premiums on cereals. Application of all measures together can lead to the 60 percent reduction goal.     

Roadmap for climate alliance economies to vision 2030: retrospect and lessons

The United Nations Climate Conference 25, held in December 2019, reached a significant agreement against implementing the Paris agreement come 2020. Bound by the contract, 189 countries who are party to the deal agreed to constrain worldwide temperature to ascend to 1.5° Celsius. To this end, the present study attempts to investigate the readiness of selected countries in the European Union to implement the agreement, which will better the quality of the global environment. In line with this, this study appraises the connection between economic growth, renewable and non-renewable energy consumption, on emissions in 11 countries in the European Union from 1990 to 2016. The study utilises the Pooled Mean Group-Auto Regressive Distributed Lag (PMG-ARDL) model estimator and Dumitrescu and Hurlin Panel Causality analysis to analyse the long-run and short-run impact and direction of causality among these factors, respectively. The long-run study's empirical results show a U-shaped Environmental Kuznets Curve (EKC) and a negative connection between renewable energy use and emissions in the EU-11 countries. In the short-run, non-renewable energy use worsens CO₂ emissions while renewable energy use leads to a fall in emissions. Similarly, causality tests show a feedback mechanism between emissions and renewable energy use and between non-renewable energy and renewable use. Also, there is unidirectional causality from income to CO₂ emissions, non-renewable energy use to CO₂ emissions. The investigation recommends an expanded proportion of renewable energy sources in the EU countries’ energy mix to cut down on emissions.

     

Feasibility of Landfill Gas as a Liquefied Natural Gas Fuel Source for Refuse Trucks

Abstract

The purpose of this paper is to develop a methodology to evaluate the feasibility of using landfill gas (LFG) as a liquefied natural gas (LNG) fuel source for heavy-duty refuse trucks operating on landfills. Using LFG as a vehicle fuel can make the landfills more self-sustaining, reduce their dependence on fossil fuels, and reduce emissions and greenhouse gases. Acrion Technologies Inc. in association with Mack Trucks Inc. developed a technology to generate LNG from LFG using the CO₂ WASH process. A successful application of this process was performed at the Eco Complex in Burlington County, PA. During this application two LNG refuse trucks were operated for 600 hr each using LNG produced from gases from the landfill. The methodology developed in this paper can evaluate the feasibility of three LFG options: doing nothing, electricity generation, and producing LNG to fuel refuse trucks. The methodology involved the modeling of several components: LFG generation, energy recovery processes, fleet operations, economic feasibility, and decision-making. The economic feasibility considers factors such as capital, maintenance, operational, and fuel costs, emissions and tax benefits, and the sale of products such as surplus LNG and food-grade carbon dioxide (CO₂).

Texas was used as a case study. The 96 landfills in Texas were prioritized and 17 landfills were identified that showed potential for converting LFG to LNG for use as a refuse truck fuel. The methodology was applied to a pilot landfill in El Paso, TX. The analysis showed that converting LFG to LNG to fuel refuse trucks proved to be the most feasible option and that the methodology can be applied for any landfill that considers this option.     

Cost–benefit analysis of using sewage sludge as alternative fuel in a cement plant: a case study

Background, aim, and scope  To enforce the implementation of the Kyoto Protocol targets, a number of governmental/international institutions have launched emission trade schemes as an approach to specify CO₂ caps and to regulate the emission trade in recent years. These schemes have been basically applied for large industrial sectors, including energy producers and energy-intensive users. Among them, cement plants are included among the big greenhouse gas (GHG) emitters. The use of waste as secondary fuel in clinker kilns is currently an intensive practice worldwide. However, people living in the vicinity of cement plants, where alternative fuels are being used, are frequently concerned about the potential increase in health risks. In the present study, a cost–benefit analysis was applied after substituting classical fuel for sewage sludge as an alternative fuel in a clinker kiln in Catalonia, Spain. Materials and methods  The economical benefits resulting in the reduction of CO₂ emissions were compared with the changes in human health risks due to exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and carcinogenic metals (As, Cd, Co, and Cr) before and after using sewage sludge to generate 20% of the thermal energy needed for pyro-processing. The exposure to PCDD/Fs and metals through air inhalation, soil ingestion and dermal absorption was calculated according to the environmental levels in soil. The carcinogenic risks were assessed, and the associated cost for the population was estimated by considering the DG Environment’s recommended value for preventing a statistical fatality (VPF). In turn, the amount of CO₂ emitted was calculated, and the economical saving, according to the market prices, was evaluated. Results  The use of sewage sludge as a substitute of conventional energy meant a probability cancer decrease of 4.60 for metals and a cancer risk increase of 0.04 for PCDD/Fs. Overall, a net reduction of 4.56 cancers for one million people can be estimated. The associated economical evaluation due to the decreasing cancer for 60,000 people, the current population living near the cement plant, would be of 0.56 million euros (US$ 0.83 million). In turn, a reduction of 144,000 tons of CO₂ emitted between 2003 and 2006 was estimated. Considering a cost of 20 euros per ton of CO₂, the global saving would be 2.88 million euros (US$ 4.26 million). Discussion  After the partial substitution of the fuel, the current environmental exposure to metals and PCDD/Fs would even mean a potential decrease of health risks for the individuals living in the vicinity of the cement plant. The total benefit of using sewage sludge as an alternative fuel was calculated in 3.44 million euros (US$ 5.09 million). Environmental economics is becoming an interesting research field to convert environmental benefits (i.e., reduction of health risks, emission of pollutants, etc.) into economical value. Conclusions  The results show, that while the use of sewage sludge as secondary fuel is beneficial for the reduction in GHG emissions, no additional health risks for the population derived from PCDD/F and metal emissions are estimated. Recommendations and perspectives  Cost–benefit analysis seems to be a suitable tool to estimate the environmental damage and benefit associated to industrial processes. Therefore, this should become a generalized practice, mainly for those more impacting sectors such as power industries. On the other hand, the extension of the study could vastly be enlarged by taking into account other potentially emitted GHGs, such as CH₄ and N₂O, as well as other carcinogenic and non-carcinogenic micropollutants.     

The impact of CO2 capture in the power and heat sector on the emission of SO2, NOx,particulate matter,volatile organic compounds and NH3 in the European Union

This study quantifies the trade-offs and synergies between climate and air quality policy objectives for the European power and heat (P&H) sector. An overview is presented of the expected performance data of CO₂ capture systems implemented at P&H plants, and the expected emission of key air pollutants, being: SO₂, NO_X, NH₃, volatile organic compounds (VOCs) and particulate matter (PM). The CO₂ capture systems investigated include: post-combustion, oxyfuel combustion and pre-combustion capture.For all capture systems it was found that SO₂, NO_x and PM emissions are expected to be reduced or remain equal per unit of primary energy input compared to power plants without CO₂ capture. Increase in primary energy input as a result of the energy penalty for CO₂ capture may for some technologies and substances result in a net increase of emissions per kWh output. The emission of ammonia may increase by a factor of up to 45 per unit of primary energy input for post-combustion technologies. No data are available about the emission of VOCs from CO₂ capture technologies.A simple model was developed and applied to analyse the impact of CO₂ capture in the European P&H sector on the emission level of key air pollutants in 2030. Four scenarios were developed: one without CO₂ capture and three with one dominantly implemented CO₂ capture system, varying between: post-combustion, oxyfuel combustion and pre-combustion.The results showed a reduction in GHG emissions for the scenarios with CO₂ capture compared to the baseline scenario between 12% and 20% in the EU 27 region in 2030. NO_x emissions were 15% higher in the P&H sector in a scenario with predominantly post-combustion and lower when oxyfuel combustion (?16%) or pre-combustion (?20%) were implemented on a large scale. Large scale implementation of the post-combustion technology in 2030 may also result in significantly higher, i.e. increase by a factor of 28, NH₃ emissions compared to scenarios with other CO₂ capture options or without capture. SO₂ emissions were very low for all scenarios that include large scale implementation of CO₂ capture in 2030, i.e. a reduction varying between 27% and 41%. Particulate Matter emissions were found to be lower in the scenarios with CO₂ capture. The scenario with implementation of the oxyfuel technology showed the lowest PM emissions followed by the scenario with a significant share allocated to pre-combustion, respectively ?59% and ?31%. The scenario with post-combustion capture resulted in PM emissions varying between 35% reduction and 26% increase.     

Use of a vehicle-modelling tool for predicting CO2 emissions in the framework of European regulations for light goods vehicles

The reduction of CO₂ emissions and fuel consumption from road transportation constitutes an important pillar of the EU commitment for implementing the Kyoto Protocol. Efforts to monitor and limit CO₂ emissions from vehicles can effectively be supported by the use of vehicle modelling tools. This paper presents the application of such a tool for predicting CO₂ emissions of vehicles under different operating conditions and shows how the results from simulations can be used for supporting policy analysis and design aiming at further reductions of the CO₂ emissions. For this purpose, the case of light duty goods (N1 category) vehicle CO₂ emissions control measures adopted by the EU is analysed. In order to understand how certain design and operating aspects affect fuel consumption, a number of N1 vehicles were simulated with ADVISOR for various operating conditions and the numerical results were validated against chassis dynamometer tests. The model was then employed for analysing and evaluating the new EU legislative framework that addresses CO₂ emissions from this vehicle class. The results of this analysis have shown the weaknesses of the current regulations and revealed new potential in CO₂ emissions control. Finally the TREMOVE model was used for simulating a possible scenario for reducing CO₂ emissions at fleet level.     

Ship emissions and their externalities for Greece

The existing and emerging international and European policy framework for the reduction of ship exhaust emissions dictates the need to produce reliable national, regional and global inventories in order to monitor emission trends and consequently provide the necessary support for future policy making. Furthermore, the inventories of ship exhaust emissions constitute the basis upon which their external costs are estimated in an attempt to highlight the economic burden they impose upon the society and facilitate the cost–benefit analysis of the proposed emission abatement technologies, operational measures and market-based instruments prior to their implementation.The case of Greece is of particular interest mainly because the dense ship traffic within the Greek seas directly imposes the impact of its exhaust emission pollutants (NO_x, SO₂ and PM) upon the highly populated, physically sensitive and culturally precious Greek coastline, as well as upon the land and seas of Greece in general, whereas the contribution of Greece in the global CO₂ inventory at a time of climatic change awareness cannot be ignored. In this context, this paper presents the contribution of Greece in ship exhaust emissions of CO₂, NO_x, SO₂ and PM from domestic and international shipping over the last 25 years (1984–2008), utilizing the fuel-based (fuel sales) emission methodology. Furthermore, the ship exhaust emissions generated within the Greek seas and their externalities are estimated for the year 2008, through utilizing the fuel-based (fuel sales) approach for domestic shipping and the activity-based (ship traffic) approach for international shipping.On this basis, it was found that during the 1984 to 2008 period the fuel-based (fuel sales) ship emission inventory for Greece increased at an average annual rate of 2.85%. In 2008, the CO₂, NO_x, SO₂ and PM emissions reached 12.9 million tons (of which 12.4 million tons of CO₂) and their externalities were found to be around 3.1 billion euro. With regard to shipping within the Greek seas, the utilization of the fuel-based (fuel sales) analysis for domestic shipping and the activity-based (ship traffic) analysis for international shipping shows that the ship-generated emissions reached 7.4 million tons (of which 7 million tons of CO₂) and their externalities were estimated at 2.95 billion euro. Finally, the internalization of external costs for domestic shipping was found to produce an increase of 12.96 and 2.71 euro per passenger and transported ton, respectively.     

Emissions Tradeoffs among Alternative Marine Fuels: Total Fuel Cycle Analysis of Residual Oil,Marine Gas Oil,and Marine Diesel Oil

Abstract

Worldwide concerns about sulfur oxide (SO_x) emissions from ships are motivating the replacement of marine residual oil (RO) with cleaner, lower-sulfur fuels, such as marine gas oil (MGO) and marine diesel oil (MDO). Vessel operators can use MGO and MDO directly or blended with RO to achieve environmental and economic objectives. Although expected to be much cleaner in terms of criteria pollutants, these fuels require additional energy in the upstream stages of the fuel cycle (i.e., fuel processing and refining), and thus raise questions about the net impacts on greenhouse gas emissions (primarily carbon dioxide [CO₂]) because of production and use. This paper applies the Total Energy and Environmental Analysis for Marine Systems (TEAMS) model to conduct a total fuel cycle analysis of RO, MGO, MDO, and associated blends for a typical container ship. MGO and MDO blends achieve significant (70–85%) SO_x emissions reductions compared with RO across a range of fuel quality and refining efficiency assumptions. We estimate CO₂ increases of less than 1% using best estimates of fuel quality and refinery efficiency parameters and demonstrate how these results vary based on parameter assumptions. Our analysis suggests that product refining efficiency influences the CO₂ tradeoff more than differences in the physical and energy parameters of the alternative fuels, suggesting that modest increases in CO₂ could be offset by efficiency improvements at some refineries. Our results help resolve conflicting estimates of greenhouse gas tradeoffs associated with fuel switching and other emissions control policies.     

The growth response of Alternanthera philoxeroides in a simulated post-combustion emission with ultrahigh [CO2] and acidic pollutants

Although post-combustion emissions from power plants are a major source of air pollution, they contain excess CO₂ that could be used to fertilize commercial greenhouses and stimulate plant growth. We addressed the combined effects of ultrahigh [CO₂] and acidic pollutants in flue gas on the growth of Alternanthera philoxeroides. When acidic pollutants were excluded, the biomass yield of A. philoxeroides saturated near 2000 μmol mol⁻¹ [CO₂] with doubled biomass accumulation relative to the ambient control. The growth enhancement was maintained at 5000 μmol mol⁻¹ [CO₂], but declined when [CO₂] rose above 1%, in association with a strong photosynthetic inhibition. Although acidic components (SO₂ and NO₂) significantly offset the CO₂ enhancement, the aboveground yield increased considerably when the concentration of pollutants was moderate (200 times dilution). Our results indicate that using excess CO₂ from the power plant emissions to optimize growth in commercial green house could be viable.     

Carbon emission from global hydroelectric reservoirs revisited

Substantial greenhouse gas (GHG) emissions from hydropower reservoirs have been of great concerns recently, yet the significant carbon emitters of drawdown area and reservoir downstream (including spillways and turbines as well as river reaches below dams) have not been included in global carbon budget. Here, we revisit GHG emission from hydropower reservoirs by considering reservoir surface area, drawdown zone and reservoir downstream. Our estimates demonstrate around 301.3 Tg carbon dioxide (CO₂)/year and 18.7 Tg methane (CH₄)/year from global hydroelectric reservoirs, which are much higher than recent observations. The sum of drawdown and downstream emission, which is generally overlooked, represents 42 % CO₂ and 67 % CH₄ of the total emissions from hydropower reservoirs. Accordingly, the global average emissions from hydropower are estimated to be 92 g CO₂/kWh and 5.7 g CH₄/kWh. Nonetheless, global hydroelectricity could currently reduce approximate 2,351 Tg CO₂eq/year with respect to fuel fossil plant alternative. The new findings show a substantial revision of carbon emission from the global hydropower reservoirs.     

Effects of urbanization and nonrenewable energy on carbon emission in Africa

This study investigates the impact of urbanization and nonrenewable energy consumption on carbon emissions. The context of the analysis is 54 African Union countries from 1996 to 2019. For estimation, we use panel quantile regression (PQR) and fully modified ordinary least squares (FMOLS). Our regression results demonstrate that there is a positive correlation between urbanization and CO₂ emission. Further, our empirical results confirmed that nonrenewable energy consumption increases environmental pollution in African Union countries. The outcomes demonstrate the EKC hypothesis because at the initial stage of development, when economic growth increases, environmental pollution increases; after a threshold point, environmental pollution decreases as economic growth increases. It can find an inverted U-shaped relationship between economic growth and CO₂ emission. The findings also show that urbanization should be planned; otherwise, it can lead to environmental degradation in the long run. Africa continent takes strict action and builds a blueprint for efficient and effective energy production and consumption. The only solution to achieve green growth in Africa is to shift from fossil fuel energy supply to renewable energy supply.

     

Total life cycle emissions of post-Panamax containerships powered by conventional fuel or natural gas

This study proposes an easy-to-apply method, the Total Life Cycle Emission Model (TLCEM), to calculate the total emissions from shipping and help ship management groups assess the impact on emissions caused by their capital investment or operation decisions. Using TLCEM, we present the total emissions of air pollutants and greenhouse gases (GHGs) during the 25-yr life cycle of 10 post-Panamax containerships under slow steaming conditions. The life cycle consists of steel production, shipbuilding, crude oil extraction and transportation, fuel refining, bunkering, and ship operation. We calculate total emissions from containerships and compare the effect of emission reduction by using various fuels. The results can be used to differentiate the emissions from various processes and to assess the effectiveness of various reduction approaches. Critical pollutants and GHGs emitted from each process are calculated. If the containerships use heavy fuel oil (HFO), emissions of CO₂ total 2.79 million tonnes (Mt), accounting for 95.37% of total emissions, followed by NO_x and SO_x emissions,which account for 2.25% and 1.30%, respectively.The most significant emissions are from the operation of the ship and originate from the main engine (ME).When fuel is switched to 100% natural gas (NG), SO_x, PM₁₀, and CO₂ emissions show remarkable reductions of 98.60%, 99.06%, and 21.70%, respectively. Determining the emission factor of each process is critical for estimating the total emissions. The estimated emission factors were compared with the values adopted by the International Maritime Organization (IMO).The proposed TLCEM may contribute to more accurate estimates of total life cycle emissions from global shipping.

Implications: We propose a total life cycle emissions model for 10 post-Panamax container ships. Using heavy fuel oil, emissions of CO₂ total 2.79 Mt, accounting for approximately 95% of emissions, followed by NO_x and SO_x emissions. Using 100% natural gas, SO_x, PM₁₀, and CO₂ emissions reduce by 98.6%, 99.1%, and 21.7%, respectively. NO_x emissions increase by 1.14% when running a dual fuel engine at low load in natural gas mode.     

Differences in the Spatial Variability Among CO2, CH4, and N2O Gas Fluxes from an Urban Forest Soil in Japan

The spatial variability of carbon dioxide (CO₂), methane (CH₄), and nitrous oxide (N₂O) fluxes from forest soil with high nitrogen (N) deposition was investigated at a rolling hill region in Japan. Gas fluxes were measured on July 25th and December 5th, 2008 at 100 points within a 100 × 100 m grid. Slope direction and position influenced soil characteristics and site-specific emissions were found. The CO₂ flux showed no topological difference in July, but was significantly lower in December for north-slope with coniferous trees. Spatial dependency of CH₄ fluxes was stronger than that of CO₂ or N₂O and showed a significantly higher uptake in hill top, and emissions in the valley indicating strong influence of water status. N₂O fluxes showed no spatial dependency and exhibited high hot spots at different topology in July and December. The high N deposition led to high N₂O fluxes and emphasized the spatial variability.     

Voluntary GHG reduction of industrial sectors in Taiwan

The present paper describes the voluntary greenhouse gas (GHG) reduction agreements of six different industrial sectors in Taiwan, as well as the fluorinated gases (F-gas) reduction agreement of the semiconductor and Liquid Crystal Display (LCD) industries. The operating mechanisms, GHG reduction methods, capital investment, and investment effectiveness are also discussed. A total of 182 plants participated in the voluntary energy saving and GHG reduction in six industrial sectors (iron and steel, petrochemical, cement, paper, synthetic fiber, and textile printing and dyeing), with 5.35 Mt reduction from 2004 to 2008, or 33% higher than the target goal (4.02 Mt). The reduction accounts for 1.6% annual emission or 7.8% during the 5-yr span. The petrochemical industry accounts for 49% of the reduction, followed by the cement sector (21%) and the iron and steel industry (13%). The total investment amounted to approximately USD 716 million, in which, the majority of the investment went to the modification of the manufacturing process (89%). The benefit was valued at around USD 472 million with an average payback period of 1.5 yr. Moreover, related energy saving was achieved through different approaches, e.g., via electricity (iron and steel), steam and oil consumption (petrochemical) and coal usage (cement). The cost for unit CO₂ reduction varies per industry, with the steel and iron industrial sector having the highest cost (USD 346 t⁻¹ CO₂) compared with the average cost of the six industrial sectors (USD 134 t⁻¹ CO₂). For the semiconductor and Thin-Film Transistor LCD industries, F-gas emissions were reduced from approximately 4.1 to about 1.7 Mt CO₂-eq, and from 2.2 to about 1.1 Mt CO₂-eq, respectively. Incentive mechanisms for participation in GHG reduction are also further discussed.     

Effects of biodiesel made from swine and chicken fat residues on carbon monoxide,carbon dioxide,and nitrogen oxide emissions

The effects of two alternative sources of animal fat-derived biodiesel feedstock on CO₂, CO, NO_x tailpipe emissions as well as fuel consumption were investigated. Biodiesel blends were produced from chicken and swine fat waste (FW-1) or floating fat (FW-2) collected from slaughterhouse wastewater treatment processes. Tests were conducted in an unmodified stationary diesel engine operating under idling conditions in attempt to simulate slow traffic in urban areas. Significant reductions in CO (up to 47% for B100; FW-2) and NO_x (up to 20% for B5; FW-2 or B100; FW-1) were attained when using biodiesel fuels at the expense of 5% increase in fuel consumption. Principal component analysis (PCA) was performed to elucidate possible associations among gas (CO₂, CO, and NO_x) emissions, cetane number and iodine index with different sources of feedstock typically employed in the biodiesel industry. NO_x, cetane number and iodine index were inversely proportional to CO₂ and biodiesel concentration. High NO_x emissions were reported from high iodine index biodiesel derived especially from forestry, fishery and some agriculture feedstocks, while the biodiesel derived from animal sources consistently presented lower iodine index mitigating NO_x emissions. The obtained results point out the applicability of biodiesel fuels derived from fat-rich residues originated from animal production on mitigation of greenhouse gas emissions. The information may encourage practitioners from biodiesel industry whilst contributing towards development of sustainable animal production.

Implications: Emissions from motor vehicles can contribute considerably to the levels of greenhouse gases in the atmosphere. The use of biodiesel to replace or augment diesel can not only decrease our dependency on fossil fuels but also help decrease air pollution. Thus, different sources of feedstocks are constantly being explored for affordable biodiesel production. However, the amount of carbon monoxide (CO), carbon dioxide (CO₂), and/or nitrogen oxide (NO_x) emissions can vary largely depending on type of feedstock used to produce biodiesel. In this work, the authors demonstrated animal fat feasibility in replacing petrodiesel with less impact regarding greenhouse gas emissions than other sources.     

Idle Emissions from Heavy-Duty Diesel Vehicles: Review and Recent Data

Abstract

Heavy-duty diesel vehicle idling consumes fuel and reduces atmospheric quality, but its restriction cannot simply be proscribed, because cab heat or air-conditioning provides essential driver comfort. A comprehensive tailpipe emissions database to describe idling impacts is not yet available. This paper presents a substantial data set that incorporates results from the West Virginia University transient engine test cell, the E-55/59 Study and the Gasoline/Diesel PM Split Study. It covered 75 heavy-duty diesel engines and trucks, which were divided into two groups: vehicles with mechanical fuel injection (MFI) and vehicles with electronic fuel injection (EFI). Idle emissions of CO, hydrocarbon (HC), oxides of nitrogen (NO_x), particulate matter (PM), and carbon dioxide (CO₂) have been reported. Idle CO₂ emissions allowed the projection of fuel consumption during idling. Test-to-test variations were observed for repeat idle tests on the same vehicle because of measurement variation, accessory loads, and ambient conditions. Vehicles fitted with EFI, on average, emitted [~20 g/hr of CO, 6 g/hr of HC, 86 g/hr of NO_x, 1 g/hr of PM, and 4636 g/hr of CO₂ during idle. MFI equipped vehicles emitted ~35 g/hr of CO, 23 g/hr of HC, 48 g/hr of NO_x, 4 g/hr of PM, and 4484 g/hr of CO₂, on average, during idle. Vehicles with EFI emitted less idleCO, HC, and PM, which could be attributed to the efficient combustion and superior fuel atomization in EFI systems. Idle NO_x, however, increased with EFI, which corresponds with the advancing of timing to improve idle combustion. Fuel injection management did not have any effect on CO₂ and, hence, fuel consumption. Use of air conditioning without increasing engine speed increased idle CO₂, NO_x, PM, HC, and fuel consumption by 25% on average. When the engine speed was elevated from 600 to 1100 revolutions per minute, CO₂ and NO_x emissions and fuel consumption increased by >150%, whereas PM and HC emissions increased by ~100% and 70%, respectively. Six Detroit Diesel Corp. (DDC) Series 60 engines in engine test cell were found to emit less CO, NO_x, and PM emissions and consumed fuel at only 75%of the level found in the chassis dynamometer data. This is because fan and compressor loads were absent in the engine test cell.     

Transport impacts on atmosphere and climate: Shipping

Emissions of exhaust gases and particles from oceangoing ships are a significant and growing contributor to the total emissions from the transportation sector. We present an assessment of the contribution of gaseous and particulate emissions from oceangoing shipping to anthropogenic emissions and air quality. We also assess the degradation in human health and climate change created by these emissions. Regulating ship emissions requires comprehensive knowledge of current fuel consumption and emissions, understanding of their impact on atmospheric composition and climate, and projections of potential future evolutions and mitigation options. Nearly 70% of ship emissions occur within 400 km of coastlines, causing air quality problems through the formation of ground-level ozone, sulphur emissions and particulate matter in coastal areas and harbours with heavy traffic. Furthermore, ozone and aerosol precursor emissions as well as their derivative species from ships may be transported in the atmosphere over several hundreds of kilometres, and thus contribute to air quality problems further inland, even though they are emitted at sea. In addition, ship emissions impact climate. Recent studies indicate that the cooling due to altered clouds far outweighs the warming effects from greenhouse gases such as carbon dioxide (CO₂) or ozone from shipping, overall causing a negative present-day radiative forcing (RF). Current efforts to reduce sulphur and other pollutants from shipping may modify this. However, given the short residence time of sulphate compared to CO₂, the climate response from sulphate is of the order decades while that of CO₂ is centuries. The climatic trade-off between positive and negative radiative forcing is still a topic of scientific research, but from what is currently known, a simple cancellation of global mean forcing components is potentially inappropriate and a more comprehensive assessment metric is required. The CO₂ equivalent emissions using the global temperature change potential (GTP) metric indicate that after 50 years the net global mean effect of current emissions is close to zero through cancellation of warming by CO₂ and cooling by sulphate and nitrogen oxides.