Long-Term Effects on Soil of the Disposal of Olive Mill Waste Waters (OMW)

Disposal of untreated olive mill waste waters (OMW) is a serious environmental problem in many Mediterranean countries. The aim of this work was to assess whether changes in soil properties have occurred due to direct disposal of raw OMW on soil and in evaporation ponds, and to investigate the potential fate and transport of pollutants after olive oil production had ceased. The results clearly showed that uncontrolled OMW disposal is a significant source of pollution to surface soil and waters. Disposal of OMW on soil greatly increased electrical conductivity (EC), available phosphorous (P), exchangeable potassium (K) and magnesium (Mg), organic matter, polyphenols, total and inorganic nitrogen (N), and available micronutrients mainly in surface soil layers. The presence of a high content of clay and carbonates in soil act as barriers and prevent downward transport of pollutants. Residual levels of total carbon (C), polyphenols, total and inorganic N, exchangeable K⁺, available P, iron (Fe), and copper (Cu) were also elevated even 8 years after mill closure. The long term disposal of OMW highlights the need to establish soil quality standards for soil parameters in order to identify soils affected by the disposal of OMW.     

Valorization of solid waste products from olive oil industry as potential adsorbents for water pollution control—a review

The global olive oil production for 2010 is estimated to be 2,881,500 metric tons. The European Union countries produce 78.5 % of the total olive oil, which stands for an average production of 2,136,000 tons. The worldwide consumption of olive oil increased of 78 % between 1990 and 2010. The increase in olive oil production implies a proportional increase in olive mill wastes. As a consequence of such increasing trend, olive mills are facing severe environmental problems due to lack of feasible and/or cost-effective solutions to olive-mill waste management. Therefore, immediate attention is required to find a proper way of management to deal with olive mill waste materials in order to minimize environmental pollution and associated health risks. One of the interesting uses of solid wastes generated from olive mills is to convert them as inexpensive adsorbents for water pollution control. In this review paper, an extensive list of adsorbents (prepared by utilizing different types of olive mill solid waste materials) from vast literature has been compiled, and their adsorption capacities for various aquatic pollutants removal are presented. Different physicochemical methods that have been used to convert olive mill solid wastes into efficient adsorbents have also been discussed. Characterization of olive-based adsorbents and adsorption mechanisms of various aquatic pollutants on these developed olive-based adsorbents have also been discussed in detail. Conclusions have been drawn from the literature reviewed, and suggestions for future research are proposed.     

Metal oxides remove hydrogen sulfide from landfill gas produced from waste mixed with plaster board under wet conditions

Hydrogen sulfide (H2S) is a major odorant in landfills. We have studied H2S production from landfill residual waste with and without sulfur-containing plaster board, including the influence of the water content in the waste. The laboratory experiments were conducted in 30-L polyethylene containers with a controlled water level. We also studied how different materials removed H2S in reactive layers on top of the waste. The organic waste produced H2S in concentrations of up to 40 parts per million (ppm) over a period of 80 days. When plaster board was added, the H2S concentration increased to 800 ppm after a lag period of approximately 40 days with a high water level, and to approximately 100 ppm after 50 days with a low water level. The methane (CH4) concentration in the initial experiment was between 5 and 70% after 80 days. The CH4 concentration in the second experiment increased to nearly 70% in the container with a high water level, slowly declining to approximately 60% between days 20 and 60. The CH4 concentrations during the experiments resembled normal landfill concentrations. Metallic filter materials were very efficient in removing H2S, whereas organic filter materials showed poor H2S removal.     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Evaluation of olive oil mill wastewater toxicity on spinach

Background, aim, and scope

Olive oil mill wastewater (OMW), a by-product of the olive oil extraction process, is annually produced in huge amounts in olive-growing areas and represents a significant environmental problem in Mediterranean areas. We studied the impact of OMW dilutions (1:20 and 1:10) on spinach plants in order to evaluate OMW dilutions as a low-cost alternative method for the disposal of this waste.

Materials and methods

The effects of OMW dilutions were evaluated on seed germination, shoot and root elongation, biomass production, nutrient uptake and translocation, ascorbic acid content, polyphenols, photosynthetic pigments, and photosynthetic performance of spinach.

Results

Plant biomass was more affected than plant height and total chlorophyll; carotenoid and ascorbic acid content progressively decreased with decreasing OMW dilution. Exposure to both OMW dilutions resulted in overaccumulation of total polyphenols, which were negatively correlated to plant biomass and nutrients. Nutrient (Fe, Ca, and Mg) content was insufficient leading to reduced growth. Water use efficiency decreased mainly due to decreased CO₂ assimilation rate rather than to a decline of transpiration rate. Disturbances in photosystem II (PSII) photochemical efficiency could be better envisaged by the ratio between variable fluorescence and initial fluorescence (Fv/Fo), which showed much greater amplitude than the maximal photochemical efficiency of PSII photochemistry (Fv/Fm).

Conclusions

From the data obtained, it is suggested that 1:20 OMW dilutions are still phytotoxic and that higher OMW dilutions should be used in order to use this waste for the irrigation of spinach plants.     

Testing of coloured samples for toxicity by the algal-ATP bioassay microplate technique

Algal-ATP bioassay is a relatively simple, inexpensive, reliable and fast testing procedure for toxicity assessment. This algal growth inhibition bioassay technique using Selenastrum capricornutum was used to assess the toxicity levels in pulp and paper mill and thermomechanical mill effluent samples. Pulp and paper mill and thermomechanical mill effluent samples contain a wide range of colours due to certain physico-chemical properties of the test samples. The optical densities of the samples ranged from 0.27 to> 2.0 (a 600 nanometer). The colour variations in the test samples may interfere with ATP measurements. This paper presents data on the nature of interferences due to certain physico-chemical properties of the test sample and the usefulness of developed controls to overcome the problems for a more realistic toxicity assessment of coloured waste samples.     

北京市朝阳区城市生活垃圾组分分布特性研究

针对垃圾焚烧的需要，按垃圾组分低位热值重新进行了垃圾分类，检验了各组分的正态分布特性，得出了服从正态分布的垃圾组分的概率分布密度函数。进行了垃圾含水率的线性相关性分析，认为垃圾含水率与厨余的相关性最大，降水量对含水率影响不大。     

Short-term responses of Oryzias latipes (Pisces: Adrianichthyidae) and Macrobrachium nipponense (Crustacea: Palaemonidae) to municipal and pharmaceutical waste water in Beijing, China: survival, behaviour, biochemical biomarkers

Whole effluent toxicity was assessed for the fish Oryzias latipes and the prawn Macrobrachium nipponense for 18 h in a dilution series (0-66%) of the inflow and effluent of a municipal waste water treatment plant as well as waste water from a teramycin producing pharmaceutical industry, before, during and after a pilot laboratory purification process. The waste waters caused acute toxicity as measured by inhibition of light emission in the luminiscent bacterium Vibrio qingaiensis sp. nov. (Q67). EROD and aryl hydrocarbon hydroxylase activity in in vitro carp liver-cells showed a dose-dependent toxic response to the municipal waste water. Behavioural responses and time-to-death of fish and prawn, recorded online with the "Multispecies Freshwater Biomonitor" proved to be concentration- and time-dependent sensitive toxicity indicators in both types of waste water. Behaviour changed stepwise from normal activity to (increased or decreased) activity to more time spent on ventilation and finally to increased morbidity at higher concentration and time of exposure. The municipal waste water treatment plant managed to reduce toxicity to bacteria (Q67), prawn and fish. The pharmaceutical waste water treatment process still has to be improved, in order to reduce toxicity for fish and prawn.     

Emission factors and sources of ethylene-diaminetetraacetic acid in waste water--a case study

Ethylene-diaminetetraacetic acid (EDTA) is a complexing agent and has the ability to form stable water-soluble complexes with metal ions. It is used in a variety of industrial applications including pulp and paper, metal, textile, leather rubber, pharmaceuticals, food, polymer production and others. Most of these applications are water based and lead to emissions into the waste water and reach sewage treatment plants. Industrial sources and municipal waste waters were monitored simultaneously. Mixed samples were taken over periods of one week at nine sample sites. The concentrations of EDTA were measured in waste water samples by gas chromatography using N-selective detection. The results showed that, although, the concentrations and loads were variable the paper manufacturing industry was the major EDTA contributor to the influent of the waste water treatment plant and contributed more than 98% of the total load. All the other sources including two household areas, were comparably low. In waste water of households concentrations between 10 and 70 microg/l EDTA could be detected. Concentrations of EDTA from different industrial waste water sources ranged from 28 up to 3980 microg/l. Influent and effluent concentrations of the WWTP were usually high in the range of 500-940 and 390-760 microg/l; respectively. Elimination rates averaged 15%, the calculation is based on emission loads. Specific emission factors were calculated based on population equivalents.     

Metal Oxides Remove Hydrogen Sulfide from Landfill Gas Produced from Waste Mixed with Plaster Board under Wet Conditions

Abstract

Hydrogen sulfide (H₂S) is a major odorant in landfills. We have studied H₂S production from landfill residual waste with and without sulfur-containing plaster board, including the influence of the water content in the waste. The laboratory experiments were conducted in 30-L polyethylene containers with a controlled water level. We also studied how different materials removed H₂S in reactive layers on top of the waste. The organic waste produced H₂S in concentrations of up to 40 parts per million (ppm) over a period of 80 days. When plaster board was added, the H₂S concentration increased to 800 ppm after a lag period of approximately 40 days with a high water level, and to approximately 100 ppm after 50 days with a low water level. The methane (CH₄) concentration in the initial experiment was between 5 and 70% after 80 days. The CH₄ concentration in the second experiment increased to nearly 70% in the container with a high water level, slowly declining to approximately 60% between days 20 and 60. The CH₄ concentrations during the experiments resembled normal landfill concentrations. Metallic filter materials were very efficient in removing H₂S, whereas organic filter materials showed poor H₂S removal.     

Nutrient Abatement Potential and Abatement Costs of Waste Water Treatment Plants in the Baltic Sea Region

We assess the physical potential to reduce nutrient loads from waste water treatment plants in the Baltic Sea region and determine the costs of abating nutrients based on the estimated potential. We take a sample of waste water treatment plants of different size classes and generalize its properties to the whole population of waste water treatment plants. Based on a detailed investment and operational cost data on actual plants, we develop the total and marginal abatement cost functions for both nutrients. To our knowledge, our study is the first of its kind; there is no other study on this issue which would take advantage of detailed data on waste water treatment plants at this extent. We demonstrate that the reduction potential of nutrients is huge in waste water treatment plants. Increasing the abatement in waste water treatment plants can result in 70 % of the Baltic Sea Action Plan nitrogen reduction target and 80 % of the Baltic Sea Action Plan phosphorus reduction target. Another good finding is that the costs of reducing both nutrients are much lower than previously thought. The large reduction of nitrogen would cost 670 million euros and of phosphorus 150 million euros. We show that especially for phosphorus the abatement costs in agriculture would be much higher than in waste water treatment plants.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0435-1) contains supplementary material, which is available to authorized users.     

Biological solubilization and mineralization as novel approach for the pretreatment of food waste

The performance of a garbage disposal system to solubilize and mineralize food wastes through biological solubilization was evaluated through the examination of the effects of operational conditions like water supply volume, water supply frequency and aeration on the amount of waste solubilized, mineralized and accumulated in the reactor. The biological solubilization process consisted of a solubilization reactor and a circulation tank. Food waste and fresh water were supplied into the solubilization reactor with support media. Wastewater from the solubilization reactor was discharged to the circulation tank and water in the circulation tank was periodically pumped back to the solubilization reactor. In case of the total food waste loading of 16 kg m(3-1) d(-1), little carbon (0-5.7%) accumulated in the reactor as long as the system was kept under aerobic condition through large volume of water supply (higher than 3.5 lh(-1)) or applying aeration in the circulation tank. However, 42% of the loaded carbon accumulated under anaerobic condition in low water supply (less than 1.8 lh(-1)). The rest of the waste was either solubilized or mineralized. The aeration in the circulation tank, therefore, was effective to provide similar solubilization and mineralization as the large volume of water supply. However, frequency of feeding at the large volume of water supply had no significant effect on the amount of waste solubilization and mineralization.     

A new systematic technique for retrofit of water network

This paper presents a new systematic technique for the retrofit of existing water network based on pinch analysis. This technique, which was applied on a paper mill, consists of three main steps: Network Diagnosis, Network Retrofit and Network Evolution. Network diagnosis step provides a good understanding of the existing water network through the use of a new tool called the Concentration Block Diagram (CBD). Next, modifications based on a set of pinch rules were performed on the existing water network to achieve the preliminary retrofit design. Finally, the preliminary retrofit design will go through an evolution to generate the final retrofit scheme. A paper making process case study was utilised to demonstrate the applicability of this new methodology. The results show that 55.5% of fresh water consumption and 65.7% of wastewater generation have been reduced, respectively, for the paper mill case study.     

Chemical and plant tests to assess the viability of amendments to reduce metal availability in mine soils and tailings

The goal of this research was to assess the potential of several industrial wastes to immobilise metals in two polluted soils deriving from an old Pb/Zn mine. Two different approaches were used to assess the performance of different amendments: a chemical one, using extraction by ethylenediaminetetraacetic acid (EDTA), and a biological one, using Lupinus albus as a bio-indicator. Four amendments were used: inorganic sugar production waste (named ‘sugar foam’, SF), sludge from a drinking water treatment sludge (DWS), organic waste from olive mill waste (OMW) and paper mill sludge (PMS). Amendment to soil ratios ranged from 0.1 to 0.3 (w/w). All the amendments were capable of significantly decreasing (p?<?0.05) EDTA-extractable Pb, Zn and Cu concentrations in the two soils used, with decreases in ranges 21–100, 25–100 and 2–100 % for Pb, Zn and Cu, respectively. The amendments tested were also effective in reducing the bioavailability of Pb and Zn for L. albus, which gave rise to a decrease in shoot metal accumulation by the lupine plants compared to that found in the control soil. That decrease reached up to 5.6 and 2.8 times for Pb and Zn, respectively, being statistically significant in most cases. Moreover, application of the OMW, DWS and SF amendments led to higher average values of plant biomass (up to 71 %) than those obtained in the control soil. The results obtained showed the technology put forward to be a viable means of remediating mine soils as it led to a decrease in the availability and toxicity of metals and, thus, facilitated the growth of a vegetation layer.     

Screening of heavy metal containing waste types for use as raw material in Arctic clay-based bricks

In the vulnerable Arctic environment, the impact of especially hazardous wastes can have severe consequences and the reduction and safe handling of these waste types are therefore an important issue. In this study, two groups of heavy metal containing particulate waste materials, municipal solid waste incineration (MSWI) fly and bottom ashes and mine tailings (i.e., residues from the mineral resource industry) from Greenland were screened in order to determine their suitability as secondary resources in clay-based brick production. Small clay discs, containing 20 or 40% of the different particulate waste materials, were fired and material properties and heavy metal leaching tests were conducted before and after firing. Remediation techniques (washing in distilled water and electrodialytical treatment) applied to the fly ash reduced leaching before firing. The mine tailings and bottom ash brick discs obtained satisfactory densities (1669–2007 kg/m³) and open porosities (27.9–39.9%). In contrast, the fly ash brick discs had low densities (1313–1578 kg/m³) and high open porosities (42.1–51. %). However, leaching tests on crushed brick discs revealed that heavy metals generally became more available after firing for all the investigated materials and that further optimisation is therefore necessary prior to incorporation in bricks.     

新型无机高分子絮凝剂在制革废水处理中的应用研究

介绍了一种新型无机高分子絮凝剂－硅钙复合型聚合氯化铝铁（ＳＣＰＡＦＣ）在制革废水处理中的应用。结果表明，该产品对废水的浊度去除率为９９％，ＳＳ去除率为９５％，ＣＯＤ去除率为９０％，Ｃｒ＾３＋的去除率为８５％左右。最佳使用ｐＨ值为６．０￣９．０，最佳投药量为０．３５￣０．４０ｇ／Ｌ，最佳混凝时间为１５￣２０ｍｉｎ，在同样条件下各项性能均优于ＰＡＣ２倍以上。同时该絮凝剂还可用于生活饮水、生产用水及其他     

Toxicity of uranium mine receiving waters to early life stage fathead minnows (Pimephales promelas) in the laboratory.

Elevated concentrations of arsenic, nickel, and molybdenum in aquatic systems around northern Saskatchewan uranium mines are an environmental concern. Early life stage fathead minnows were used to assess toxicity from several aquatic systems near the Key Lake and Rabbit Lake uranium operations. Hatching success of fish embryos exposed to waters receiving contaminants associated with uranium ore milling was reduced by 32-61% relative to controls. Mortality differed in two lakes receiving mill effluents because of opposing factors influencing metal toxicity (i.e. low pH and high hardness). In one mill receiving water (Fox Lake), larval mortality was 0%, whereas mortality was 85% in water collected from a downstream location (Unknown Lake). Fish embryos exposed to open-pit dewatering effluent receiving waters, or water from a flooded open pit (i.e. pit waters), hatched 26-39% earlier than those exposed to reference or control water. The combination of low water hardness and elevated nickel concentrations in pit waters contributed to the early hatching. Egg hatchability and hatching time were more sensitive indicators of toxicity than 'standard' endpoints, like larval mortality and growth. Current regulatory emphasis on single contaminants and standard toxicological endpoints should be re-evaluated in light of the complex interaction among confounding variables such as pH, hardness. conductivity, and multi-metal mixtures.     

Partitioning gas tracer tests for measurement of water in municipal solid waste

A key component in the operation of almost all bioreactor landfills is the addition of water to maintain optimal moisture conditions. To determine how much water is needed and where to add it, in situ methods are required to measure water within solid waste. Existing technologies often result in measurements of unknown accuracy, because of the variability of solid waste materials and time-dependent changes in packing density, both of which influence most measurement methods. To overcome these problems, a new technology recently developed by hydrologists for measuring water in the vadose zone--the partitioning gas tracer test--was tested. In this technology, the transport behavior of two gas tracers within solid waste is used to measure the fraction of the void space filled with water. One tracer is conservative and does not react with solids or liquids, while a second tracer partitions into the water and is separated from the conservative tracer during transport. This technology was tested in four different solid waste packings and was capable of determining the volumetric water content to within 48% of actual values, with most measurement errors less than 15%. This technology and the factors that affect its applicability to landfills are discussed in this paper.     

净水厂生产废水回用对供水水质的影响

通过研究生产废水回用对水质的影响,认为生产废水含固率是影响回用效果的重要评价指标,回用澄清池排泥水和滤池反冲洗水,对水质的影响规律相似.改善混凝条件的最佳含固率范围也是回用对水质影响最小的含固率范围.当含固率小于1%时,回用不会对水质造成影响,当含固率大于1%时,回用较无回用时的水质变差,但不会超过水质标准.回用生产废水可以提高有机物的去除率,主要是因为生产废水中含有的Al(OH)3沉淀物的物理吸附和卷扫絮凝功能.     

Bisphenol A: emissions from point sources

Bisphenol A is widely used for the production of epoxy resins and polycarbonate plastics. Special in vitro test systems and animal experiments showed a weak estrogenic activity for Bisphenol A. Based on in vitro receptor interaction studies, the activity was estimated to be 2 x 10(-3) lower than that of estradiol. Especially aquatic wildlife could be endangered by waste water discharges. To manage possible risks arising from Bisphenol A contamination, the major fluxes need to be obtained and the contributors to the contamination of municipal treatment plants need to be determined. In this study, industrial emitters and communal waste waters were monitored simultaneously. Mixed samples were taken over periods of one week at nine sample sites. The results showed that the concentrations and fluxes were variable. The paper industry was the major Bisphenol A contributor to the influent of the waste water treatment plant. All the other fluxes measured, including two household areas, were considerably low. About 90% of the total load was removed during the waste water treatment.