再生金含铱现状及治理措施

根据实际生产过程中发现的再生金含铱现象,总结分析了再生金中含铱的形成原因和特点,并提出了相关的治理建议,为促进行业健康、规范发展提供参考。     

Field application of reactive iron walls for in-situ degradation of volatile organic compounds in groundwater

Reactive walls containing metallic iron have been installed at several commercial sites in the United States to degrade chlorinated organic compounds in groundwater. Although the results of laboratory studies conducted to determine reaction mechanisms have been widely disseminated, little information has been published on the full-scale application of this technology. This article describes the construction, implementation, and cost of in-situ reactive walls at three commercial sites.     

Utilization of iron ore tailing for the synthesis of zeolite A by hydrothermal method

Journal of Material Cycles and Waste Management - The iron ore tailing (IOT) is an industrial waste, in which large accumulations represent a serious environmental threat. To reduce the...     

Oxidation catalyst of iron oxide suppressing dioxin formation in polyethylene combustion

A new iron oxide catalyst, which has a superior oxidation activity in carbon monoxide and polyethylene (PE) combustion, was synthesized by an aqueous solution reaction. Catalytic oxidation of carbon monoxide over six kinds of hematite obtained from the goethite was done using a microcatalytic pulse reactor, and the composition of the hematite with the highest oxidation activity was determined. With the aim of suppressing dioxin formation on combustion, incineration tests of solid wastes in PE refuse bags with and without the goethite were carried out using a commercial semibatch-type incinerator with a combustion chamber of 6.2 m³. The result confirmed that the concentration of dioxins in the flue gas decreased considerably when the refuse was incinerated in PE bags manufactured with goethite. Received: July 24, 2000 / Accepted: October 18, 2000     

Utilization of nanoscale zero‐valent iron for source remediation—A case study

A pilot‐scale study was performed using a palladium‐catalyzed and polymer‐coated nanoscale zero‐valent iron (ZVI) particle suspension at the Naval Air Station in Jacksonville, Florida. A total of 300 pounds of nanoscale ZVI particle suspension was injected via a gravity feed and recirculated through a source area containing chlorinated volatile organic compounds (VOCs). The recirculation created favorable mixing and distribution of the iron suspension and enhanced the mass transfer of sorbed and nonaqueous constituents into the aqueous phase, where the contaminants could be reduced. Between 65 and 99 percent aqueous‐phase VOC concentration reduction occurred, due to abiotic degradation, within five weeks of the injection. The rapid abiotic degradation processes then yielded to slower biological degradation as subsequent decreases in ‐elimination parameters were observed—yet favorable redox conditions were maintained as a result of the ZVI treatment. Post‐treatment analyses revealed cumulative reduction of soil contaminant concentrations between 8 and 92 percent. Aqueous‐phase VOC concentrations in wells side gradient and downgradient of the source were reduced up to 99 percent and were near or below applicable regulatory criteria. These reductions, coupled with the generation of innocuous by‐products, indicate that nanoscale ZVI effectively degraded contamination and reduced the mass flux from the source, a critical metric identified for source treatment. A summary of this project was recently presented at the US EPA Workshop on Nanotechnology for Site Remediation in Washington, D.C., on October 21–22, 2005. This case study supplied evidence that nanoscale zero valent iron, an emerging remediation technology, has been implemented successfully in the field. More information about this workshop and this presentation can be found at www.frtr.gov/nano/index.htm. © 2006 Wiley Periodicals, Inc.     

Utilization and treatment of exhausted cooling oil-emulsions

The subject of investigation was exhausted cooling oil-emulsions coming from copper wire drawing. The summary content of the organic substances in emulsions expressed as COD, ranged from 200 to 300 gO₂/dm³. The total amount of copper was about 7 g/dm³. The suggested method of treatment was based on separation of emulsion, thermocatalytic oxidation of the oil phase and electrochemical reduction of copper. The method allows oxidation of 99% organic substances in an autothermic way and over 90% recovery of metallic copper contained in emulsion with energy consumption at 2.2 kWh/kg.     

Formation of persistent chlorinated aromatic compounds in simulated and real fly ash from iron ore sintering

Effects of carbon concentration and Cu additive in simulated fly ash (SFA) and real fly ash (RFA) on the formation of polychlorinated dibenzofurans (PCDFs), polychlorinated dibenzo-p-dioxins (PCDDs), chlorobenzenes, and polychlorinated biphenyls which were all regarded as persistent chlorinated aromatics in iron ore sintering were investigated. In the annealing process of SFA with various carbon contents, the yield of chlorinated aromatics and the I-TEQ obtained their maximum at 10 wt% carbon content. Active carbon in SFA acted as the carbon source as well as an adsorbent which led to higher production of PCDD/F in solid phase at 10 wt% carbon content. The increase of carbon content will be beneficial on the formation of 2,3,7,8-Chloro-substituted PCDF compared with 2,3,7,8-Chloro-substituted PCDD. In addition, the CuCl₂·2H₂O was a much more powerful catalyst in the formation of chlorinated aromatic compounds compared with elementary Cu, since it served as both a catalyst and a chlorine donor. However, the RFA behaved similarly with SFA with elementary Cu in the formation of chlorinated aromatic compounds. The effect of carbon content and copper additives on formation of 2,3,7,8-chloro-substituted congeners displayed similar characteristics with the tetra- to octa-PCDD/F isomers and even the total PCDD/Fs.     

零价铁在废水处理中应用的研究进展

简述了零价铁（ZVI）处理废水的机理。综述了ZVI、纳米零价铁 （nZVI）对焦化废水、军火厂废水、制药废水、橄榄油厂废水、染料废水、含盐类废水及含重金属废水处理的研究进展以及ZVI复合材料处理废水的研究进展。指出将ZVI与超声波、微波及Fenton法等技术联合,形成具有各自优点的新处理技术,将是今后的研究重点。     

Recovery of iron oxide and calcium chloride from an iron-rich chloride waste using calcium carbonate

Journal of Material Cycles and Waste Management - The ilmenite-chloride process has used for the production of TiCl4 from the ilmenite (FeTiO3) ore, which produces cyclone dust containing mostly...     

Enhancement of arsenic mobility by Fe(III)-reducing bacteria from iron oxide minerals

Batch bioleaching experiments were conducted using the Fe(III)-reducing bacteria, Shewanella putrefaciens CN32, to determine the effect of the Fe(III) reduction on As mobilization. For this purpose, Fe(III) reduction experiments were also performed to deduce the optimum conditions of the bioleaching experiment. In the Fe(III) reduction experiment, insoluble Fe(III), such as synthesized poorly and well crystalline hydrous ferric oxide (HFO), was rarely used as electron acceptor by S. putrefaciens. However, the addition of a humic substance (2,6-anthraquinone disulfonate, AQDS) greatly increased iron reduction capacity (5–10 times) under the same conditions. For the poorly and well crystalline HFO, the effective carbon sources as electron donor were acetate and lactate, respectively. In bioleaching experiments using the two types of synthesized Fe(III) oxide minerals bearing As (poorly crystalline HFO and well crystalline HFO), S. putrefaciens enhanced the As mobilization, with 1,870 and 1,460 mg kg^?1 of As released in the poorly and well crystalline HFO, respectively. From a correlation coefficient analysis between reduced Fe and released As, the R ² values were 0.8612 and 0.9115, respectively. These results indicated that the reduction of Fe(III) can enhance the As mobilization. Therefore, bioleaching using the Fe(III)-reducing mechanism can be useful for remediation of As contaminated soil.     

Utilization of sludge from water treatment plant as a filler material in pavements

Journal of Material Cycles and Waste Management - The recycling potential of water treatment plant (WTP) sludge in asphalt concrete mixes as filler material was assessed in this study. Marshall...     

Utilization of textile effluent wastewater treatment plant sludge as brick material

In the present work, the feasibility of using sludge generated in wastewater treatment plants of textile industry as a partial replacement for clay in the conventional brick manufacturing process is examined. Physico-chemical properties of the sludge and clay were studied. The characteristics of bricks with replacement of sludge (0–50 %) with an increment of 3 % were determined. All the brick samples satisfied the requirements of Indian Standards norms in terms of weight loss on ignition. The bricks with sludge up to 15 % satisfied the prescribed norms for compressive strength and water absorption. Results also showed that the brick weight loss on ignition was mainly attributed to the organic matter content in the sludge being burnt off during the firing process. The characteristics of bricks such as efflorescence, density and weight loss on ignition for bricks with replacement of clayey soil with textile sludge up to 15 % also satisfied the requirements of the Indian Standard. Thus, textile sludge up to 15 % can be effectively added to make brick material.     

Utilization (recycling) of iron and steel industry by-product (GGBS) in concrete: strength and durability properties

Due to exponential growing in urbanization and industrialization, byproducts from industries are becoming an increasing concern for recycling and waste management. Ground granulated blast furnace slag (GGBS) is by-product from the blast-furnaces of iron and steel industries. GGBS is very useful in the design and development of high-quality cement paste/mortar and concrete. This paper covers the properties of GGBS, reaction mechanism, and its effect on strength and durability properties of concrete. Properties covered are sorptivity, microstructure, compressive strength, splitting tensile strength, flexural strength, permeability, sulfate resistance, freezing and thawing resistance, corrosion of concrete.     

工业挥发性有机物处理技术分析与展望

挥发性有机物(VOCs)是大气污染物的主要来源之一。对现有工业VOCs处理技术进行了归类及概述,总结了各类技术中主要方法的工作原理、技术特点、适用范围和应用现状,包括吸收法、吸附法、膜分离法、冷凝法等回收技术,热氧化(燃烧)法、生物降解法、低温等离子法、光催化法等非回收消除技术,以及工业上典型的VOCs集成组合治理技术。指出,集成组合治理技术的研发是该领域未来的发展方向。     

Valorization of regenerated LDPE by blending with EPDM in the presence of peroxide

The present work aims to the valorization of regenerated low density polyethylene (LDPE) by blending with small quantities of ethylene-propylene-diene monomer (EPDM). Three types of regenerated LDPE (rLDPE) from different waste sources (greenhouses, milk pouches,...) were characterized in terms of physico-chemical (density, melt flow index, water absorption, melting temperature and structure by Fourier transform infrared (FTIR) spectroscopy) and mechanical properties (tensile properties and hardness). The optimization of the peroxide content required for the crosslinking of the LDPE/EPDM blends was due by measuring torque and tensile strength. Once the peroxide content was optimized, different blends were obtained by varying the EPDM content. Then they were characterized physically (density, water absorption) and mechanically (tensile properties and hardness). Finally, the blends behavior under the conjugated effect of heat and water was determined at 70 °C for 7 days. The obtained results showed that this kind of blending has contributed in improving the performance of regenerated LDPE.     

催化铁内电解-生物处理耦合技术的机理及研究进展

催化铁内电解技术(简称催化铁技术)是同济大学城市污染控制国家工程研究中心自主研发的新型废水处理方法。介绍了催化铁-生物处理耦合技术的机理,总结了近年来该技术的研究进展,并在此基础上指出了该技术目前存在的问题及发展方向。对于催化铁-生物处理耦合技术而言,考察在实际应用中的影响因素、完善催化铁的后续处理、深入分析反应机理及可控路径、探索与不同处理工艺的兼容性、提高长期运行的稳定性等是今后需重点关注的研究内容。     

我国废钢铁市场的发展前景及废钢电子交易推荐标准

随着我国钢铁工业高速发展和国家对节能减排的高度重视,废钢铁资源的应用倍受业内关注。对我国废钢供需市场的规模、现状及发展前景进行分析和预测,并对我国废钢电子交易推荐标准进行详细介绍,指出作为大宗商品交易发展方向的电子交易模式,是我国废钢贸易的发展趋势,有利于废钢市场有序健康发展。     

Steady state of semi-continuous anaerobic digestion of cattle manure under the stress of adding iron and titanium oxide nanoparticles

Journal of Material Cycles and Waste Management - Anaerobic digestion (AD) is a sustainable technology that combines biogas production with proper waste management. However, the operation of an...