Reduction of the phenolic components in olive-mill wastewater by an enzymatic treatment and its impact on durum wheat (Triticum durum Desf.) germinability

Olive-mill wastewater (OMW), an effluent of olive oil extraction process, is annually produced in huge amounts in olive growing areas. An interesting option for its disposal is the spreading on agricultural land, provided that phytotoxic effects are neutralized. The objective of the present investigation was to evaluate the potential of an enzyme-based treatment in removing OMW phytotoxicity. To this aim, germinability experiments on durum wheat (Triticum durum Desf. cv. Duilio) were conducted in the presence of different dilutions of raw or enzyme-treated OMW. OMW treatment with laccase resulted in a 65% and 86% reduction in total phenols and ortho-diphenols respectively, due their polymerization as revealed by size-exclusion chromatography. Raw OMW exerted a significant concentration-dependent inhibition on the germinability of durum wheat seeds which was evident up to a dilution rate of 1:8. When the effluent was treated with a fungal laccase, germinability was increased by 57% at a 1:8 dilution and by 94% at a 1:2 dilution, as compared to the same dilutions using untreated OMW. The treatment with laccase also decreased the mean germination time by about 1 day as compared to untreated controls. These results show that germinability inhibition due to OMW can be reduced effectively using fungal laccase, suggesting that phenols are the main determinants of its phytotoxicity.     

Enzyme and fungal treatments and a combination thereof reduce olive mill wastewater phytotoxicity on Zea mays L. seeds

The phytotoxicity of olive-mill wastewater (OMW) has been suggested to be mainly due to its phenolic components. This study investigated the impact of three different low-cost dephenolization treatments on the wastewater phytotoxicity. To this aim, germinability of maize (Zea mays L.) seeds sown on a sandy-loamy soil which had been spread with different volumes (from 40 to 160m(3)ha(-1)) of either biologically-treated OMW or relative incubation control was determined. Biological treatments included either Panus tigrinus liquid cultures or incubation with commercial laccase (1UIml(-1)) or an innovative sequential combination of laccase and P. tigrinus cultures. All treatments markedly reduced phytotoxicity and promising results were obtained with commercial laccase. In fact, germinability and mean germination times in soil spread with laccase-treated OMW, did not significantly differ from those observed in soil irrigated with tap water (control) up to OMW volumes of 120m(3)ha(-1). Although the highest phenol reduction (ca. 81%) was obtained by the sequential use of laccase and P. tigrinus, the feasibility of the enzyme treatment is undoubtedly more convincing under the technological point of view.     

Land spreading of olive mill wastewater: effects on soil microbial activity and potential phytotoxicity

Extremely high organic load and the toxic nature of olive mill wastewater (OMW) prevent their direct discharge into domestic wastewater treatment systems. In addition to the various treatment schemes designed for such wastewater, controlled land spreading of untreated OMW has been suggested as an alternative mean of disposal. A field study was conducted between October 2004 and September 2005 to assess possible effects of OMW on soil microbial activity and potential phytotoxicity. The experiment was carried out in an organic orchard located on a Vertisol-type soil (Jezre'el Valley, Israel) and included two application levels of OMW (36 and 72m(3)ha(-1)). Total microbial counts, and to less extent the hydrolytic activity and soil respiration were increased following the high OMW application level. A bench-scale lab experiment showed that the rate of OMW mineralization was mainly dependent on the general status of soil activity and was not related to previous acclimatization of the soil microflora to OMW. Soil phytotoxicity (% germination and root elongation) was assessed in soil extracts of samples collected before and after each OMW application, using germinating cress (Lepidium sativum L.) seeds. We found direct short-term effect of OMW application on soil phytotoxicity. However, the soil was partly or completely recovered between successive applications. No further phytotoxicity was observed in treated soils as compared with control soil, 3 months after OMW application. Such short-term phytotoxicity was not in correlation with measured EC and total polyphenols in the soil extracts. Overall, the results of this study further support a safe controlled OMW spreading on lands that are not associated with sensitive aquifers.     

Dephenolization and detoxification of olive-mill wastewater (OMW) by purified biotic and abiotic oxidative catalysts

The capability of two oxidative catalysts, a laccase from Rhus vernicifera and birnessite, a manganese oxide, in the dephenolization and detoxification of two olive-mill wastewater (OMW) samples, C1 and C2, differing for complexity and composition, was evaluated. OMW phenolic extracts (EC1 and EC2) and mono-substrate solutions of phenols mostly present in OMW samples were also tested. Birnessite was more effective than laccase in removing the phenolic content from mono-substrate solutions (more than 70% of each initial phenolic concentration) and of either OMW samples or EC1 and EC2 extracts. For instance, 60% of the total phenolic content of EC1 was removed after 48-h treatment with 5 mg mL(-1) birnessite and the efficiency was lower as greater was the complexity of the OMW sample (only 17% removal from EC2 over the same time span). Phytotoxicity tests with Lepidium sativum and Lycopersicon esculentum seeds and antibacterial toxicity tests with Bacillus megaterium were performed on crude OMW samples and their extract and exhausted fractions before and after the catalytic treatment. Results demonstrated that (a) monomeric phenols were certainly but not exclusively responsible of OMW phytotoxicity, whereas their removal led to a quite complete elimination of the toxicity toward bacterial growth; (b) other components not removable by the oxidative catalysts very likely contribute to OMW phytotoxicity; and (c) the choice of the vegetal species to use in toxicity tests might be crucial for correct and easily interpretable results. Overall the results provided useful information on the possible use of oxidative catalysts for the efficient treatment of complex aqueous wastes such as those deriving from olive industry.     

Structural responses of Daucus carota root-organ cultures and the arbuscular mycorrhizal fungus, Glomus intraradices, to 12 pharmaceuticals

Pharmaceuticals and personal care products may enter the terrestrial environment through the amendment of agricultural soils with manure or biosolids with potential impacts on beneficial soil microbe populations. The beneficial symbiotic relationship between most plant species and arbuscular mycorrhizal fungi is a primary determinant of plant health and soil fertility. As such, there is increasing recognition of the need to study the impacts of anthropogenic stressors on plant-microbe interactions in soil ecotoxicology studies and risk assessment. A case study exploring the use of root-organ cultures to evaluate the effects of 12 common veterinary and human-use pharmaceuticals on the arbuscular mycorrhizal fungus, Glomus intraradices grown on Daucus carota root-organ cultures is presented. The bioassays were conducted over a 28-day exposure period at concentrations up to 1000mugl(-1). Root length and the fungal endpoints of hyphal growth and spore production were evaluated weekly during the study. Sulfamethoxazole and atorvastatin were the most phytotoxic compounds with EC(50) values of 45mugl(-1) and 65mugl(-1), respectively. Three compounds exhibited selective mycotoxicity, whereby the fungal symbiont was adversely affected at concentrations significantly less than that calculated for root length. The EC(50) for G. intraradices hyphal length was 45mugl(-1) for doxycycline, while carbamazepine and 17-alpha-ethynyl estradiol targeted spore production with EC(50) values of 113 and 116mugl(-1), respectively. The assay results indicate that the root lengths responded quickly to the presence of phytotoxic pharmaceuticals in the culture medium. Hyphal length is a sensitive endpoint after 21 days exposure, while spore production requires 28 days exposure before significant differences could be detected. Root-organ cultures provide an effective means to evaluate chemical stressors on arbuscular mycorrhizal fungi and can be used to screen for root-based phytotoxicity.     

Bioassay for determining sensitivity to sulfosulfuron on seven plant species

This study presents a bioassay procedure, based on the root and shoot growth parameters, for the determination of the herbicide sulfosulfuron (1-(4,6 dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonil)urea) sensitivity on seven vegetal species. Plant response to sulfosulfuron was calculated with the equations fitted to the root growth data as a function of the logarithm of the herbicide concentration by non-linear regression and was used to calculate the doses for 10, 30 and 50% inhibition of root growth (EC10, EC30 and EC50). The results indicate that the phytotoxic effect of sulfosulfuron in all the species assayed followed the order: flax > maize > onion > vetch > lepidium sativum > tomato > barley. These species showed phytotoxicity at low levels of sulfosulfuron and flax appeared to be the most susceptible species to sulfosulfuron (0.001 mg/L).     

Bioconversion of olive-mill dry residue by Fusarium lateritium and subsequent impact on its phytotoxicity

The present study investigated the ability of the non-pathogenic fungus Fusarium lateritium to either degrade or modify aromatic substances in olive-mill dry residue (DOR) and to reduce its phytotoxicity. The 80% reduction of ethylacetate extractable phenols in DOR colonized by the fungus for 20 weeks appeared to be due to polymerization reactions of phenol molecules as suggested by mass-balance ultrafiltration and size-exclusion chromatography experiments. Several lignin-modifying oxidases, including laccase, Mn-peroxidase and Mn-inhibited peroxidase were detected in F. lateritium solid-state cultures. Tests performed with tomato seedlings in soils containing 6% (w/w) sterilized non-inoculated DOR showed that the waste was highly phytotoxic. By contract, F. lateritium growth on DOR for 20 weeks led to a complete removal of the waste toxicity and to a higher shoot dry weight of tomato plants than that obtained in the absence of DOR.     

A biological test system for the evaluation of the phytotoxicity of metal-contaminated soils

The potential soil phytotoxicity in the surroundings of an old zinc smelter closed in 1966, was evaluated by a biological test system. This system is based on the analysis of shoot growth and (iso-) enzymes in leaves and roots of 2-week-old seedlings of Phaseolus vulgaris grown on soil samples under controlled environmental conditions. The biological data were presented in a phytotoxicity index, which allowed classification of the soil samples into four phytotoxicity classes. Comparison was made between the biological results and soil and plant metal content. The study revealed that more than 20 years after closure of the factory, the soils in its surroundings were still potentially phytotoxic. Zinc proved to be the most important, but not the only, phytotoxic element, as was shown by isozyme analysis and by the strong correlation between the biological data, the water soluble Zn fraction of the soil and leaf Zn content. The effect of contamination extended to a distance of more than 3 km from the industrial site in the direction of the prevailing wind.     

Biodegradation and detoxification of olive mill wastewater by selected strains of the mushroom genera Ganoderma and Pleurotus

Thirty-nine white-rot fungi belonging to nine species of Agaricomycotina (Basidiomycota) were initially screened for their ability to decrease olive-mill wastewater (OMW) phenolics. Four strains of Ganoderma australe, Ganoderma carnosum, Pleurotus eryngii and Pleurotus ostreatus, were selected and further examined for key-aspects of the OMW biodegradation process. Fungal growth in OMW-containing batch cultures resulted in significant decolorization (by 40-46% and 60-65% for Ganoderma and Pleurotus spp. respectively) and reduction of phenolics (by 64-67% and 74-81% for Ganoderma and Pleurotus spp. respectively). COD decrease was less pronounced (12-29%). Cress-seeds germination increased by 30-40% when OMW was treated by Pleurotus strains. Toxicity expressed as inhibition of Aliivibrio fischeri luminescence was reduced in fungal-treated OMW samples by approximately 5-15 times compared to the control. As regards the pertinent enzyme activities, laccase and Mn-independent peroxidase were detected for Ganoderma spp. during the entire incubation period. In contrast, Pleurotus spp. did not exhibit any enzyme activities at early growth stages; instead, high laccase (five times greater than those of Ganoderma spp.) and Mn peroxidases activities were determined at the end of treatment. OMW decolorization by Ganoderma strains was strongly correlated to the reduction of phenolics, whereas P. eryngii laccase activity was correlated with the effluent’s decolorization.     

Chelating agent-assisted electrokinetic removal of cadmium, lead and copper from contaminated soils

An integrated experimental program was conducted to remove Cd, Pb and Cu from contaminated soil. The chelate agents nitrilotriacetic acid (NTA), diethylenetriamine pentaacetic acid (DTPA) and ethyleneglycol tetraacetic acid (EGTA) were used as washing solutions under different pH conditions and concentrations. Results showed that the extraction efficiency for Cd in decreasing order was NTA > EGTA > DTPA, while for Pb and Cu it was DTPA > NTA > EGTA. The use of higher chelate concentrations did not necessarily result in greater extraction efficiency. Electrokinetic remediation was applied by conditioning anolyte-catholyte pH to neutral values in order to avoid any potential alterations to the physicochemical soil properties. The removal efficiency for Cd was 65-95%, for Cu 15-60%, but for Pb was less than 20%. The phytotoxicity of the treated soil showed that the soil samples from the anode section were less phytotoxic than the untreated soil, but the phytotoxicity was increased in the samples from the cathode section.     

Enhanced reduction of phenol content and toxicity in olive mill wastewaters by a newly isolated strain of Coriolopsis gallica

The search for novel microorganisms able to degrade olive mill wastewaters (OMW) and withstand the toxic effects of the initially high phenolic concentrations is of great scientific and industrial interest. In this work, the possibility of reducing the phenolic content of OMW using new isolates of fungal strains (Coriolopsis gallica, Bjerkandera adusta, Trametes versicolor, Trichoderma citrinoviride, Phanerochaete chrysosporium, Gloeophyllum trabeum, Trametes trogii, and Fusarium solani) was investigated. In vitro, all fungal isolates tested caused an outstanding decolorization of OMW. However, C. gallica gave the highest decolorization and dephenolization rates at 30 % v/v OMW dilution in water. Fungal growth in OMW medium was affected by several parameters including phenolic compound concentration, nitrogen source, and inoculum size. The optimal OMW medium for the removal of phenolics and color was with the OMW concentration (in percent)/[(NH₄)₂SO₄]/inoculum ratio of 30:6:3. Under these conditions, 90 and 85 % of the initial phenolic compounds and color were removed, respectively. High-pressure liquid chromatography analysis of extracts from treated and untreated OMW showed a clear and substantial reduction in phenolic compound concentrations. Phytotoxicity, assessed using radish (Raphanus sativus) seeds, indicated an increase in germination index of 23–92 % when a 30 % OMW concentration was treated with C. gallica in different dilutions (1/2, 1/4, and 1/8).

Evaluation of olive oil mill wastewater toxicity on spinach

Background, aim, and scope

Olive oil mill wastewater (OMW), a by-product of the olive oil extraction process, is annually produced in huge amounts in olive-growing areas and represents a significant environmental problem in Mediterranean areas. We studied the impact of OMW dilutions (1:20 and 1:10) on spinach plants in order to evaluate OMW dilutions as a low-cost alternative method for the disposal of this waste.

Materials and methods

The effects of OMW dilutions were evaluated on seed germination, shoot and root elongation, biomass production, nutrient uptake and translocation, ascorbic acid content, polyphenols, photosynthetic pigments, and photosynthetic performance of spinach.

Results

Plant biomass was more affected than plant height and total chlorophyll; carotenoid and ascorbic acid content progressively decreased with decreasing OMW dilution. Exposure to both OMW dilutions resulted in overaccumulation of total polyphenols, which were negatively correlated to plant biomass and nutrients. Nutrient (Fe, Ca, and Mg) content was insufficient leading to reduced growth. Water use efficiency decreased mainly due to decreased CO₂ assimilation rate rather than to a decline of transpiration rate. Disturbances in photosystem II (PSII) photochemical efficiency could be better envisaged by the ratio between variable fluorescence and initial fluorescence (Fv/Fo), which showed much greater amplitude than the maximal photochemical efficiency of PSII photochemistry (Fv/Fm).

Conclusions

From the data obtained, it is suggested that 1:20 OMW dilutions are still phytotoxic and that higher OMW dilutions should be used in order to use this waste for the irrigation of spinach plants.     

Bioassay for Determining Sensitivity to Sulfosulfuron on Seven Plant Species

This study presents a bioassay procedure, based on the root and shoot growth parameters, for the determination of the herbicide sulfosulfuron (1-(4,6 dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonil)urea) sensitivity on seven vegetal species. Plant response to sulfosulfuron was calculated with the equations fitted to the root growth data as a function of the logarithm of the herbicide concentration by non-linear regression and was used to calculate the doses for 10, 30 and 50% inhibition of root growth (EC₁₀, EC₃₀ and EC₅₀). The results indicate that the phytotoxic effect of sulfosulfuron in all the species assayed followed the order: flax > maize > onion > vetch > lepidium sativum > tomato > barley. These species showed phytotoxicity at low levels of sulfosulfuron and flax appeared to be the most susceptible species to sulfosulfuron (0.001 mg/L).     

Valorization of treated olive mill wastewater in fertigation practice

Olive mill wastewater (OMW) brings about a major environmental problem in Tunisia as well as in the other Mediterranean countries. Its strong organic load and its toxicity due to the presence of complex phenolic compounds have dire effects when applied to soil. To overcome this difficulty, the OMW pretreatment was investigated in the present work using the Fenton oxidation reaction with zero-valent iron. Then, this pretreated wastewater was valorized in fertigation practice. The effects of the addition of different concentrations of both treated and raw OMW on soil and cropping system were investigated. The treatment by Fenton oxidation with zero-valent iron could reduce 50 % of COD and decrease 53 % of phenolic compounds. OMW application had a temporary effect on the soil pH and EC. The results showed that the evolution of soil pH and EC was related to the organic matter of the soil which depends on the spread concentrations of raw or treated OMW. After 15-day incubation period, the soil pH and EC tended to stabilize and return to the control level. Moreover, this stabilization is faster in treated OMW than that in raw OMW especially for concentrations as high as 3 and 4 %. Plants cultivated with treated OMW showed an increase in their germination. The results pointed an improvement in the stem length of plants which is almost similar to that of the control for both pea and tomato, especially for high concentrations of 3 and 4 %.     

Bioherbicidal activity of a germacranolide sesquiterpene dilactone from Ambrosia artemisiifolia L.

Ambrosia artemisiifolia L. (common ragweed) is an invasive plant whose allelopathic properties have been suggested by its field behaviour and demonstrated through phytotoxicity bioassays. However, the nature of the molecules responsible for the allelopathic activity of common ragweed has not been explored. The main objective of this study was to identify the phytotoxic molecules produced by A. artemisiifolia. A preliminary investigation has indicated that a methanol extract of A. artemisiifolia completely inhibited the germination of cress and radish. Semi-preparative fractionation of the methanol extract allowed separating of phytotoxic fraction which contained a single compound. The structure of this compound was elucidated by liquid chromatography–mass spectrometry (LC-MS)/MS, high-resolution mass spectral, nuclear magnetic resonance, and Fourier transform infrared spectra as sesquiterpene lactone isabelin (C₁₅H₁₆O₄). The effect of pure isabelin was tested on four different weed species, confirming the inhibitory activity of molecule. The results indicate directions for the future studies about herbicidal specific activity of isabelin, as pure molecule or in the crude extract, as a potential candidate for biological weed control.     

Effect of amendment C:N ratio on plant richness, cover and metal content for acidic Pb and Zn mine tailings in Leadville, Colorado

Biosolids and woody debris were applied with target C:N ratios of 8:1 to 50:1 to phytotoxic, acidic, high metal mine tailings to test the effect of amendment C:N ratio on native plant restoration. Total soil C decreased over time indicating an active microbial community. The 8:1 treatment initially had no growth, the highest plant cover for the final sampling (86.8+/-13.8%) and the lowest number of species (3.33+/-0.4). The greatest number of species was in the 30:1 treatment (5.44+/-0.45). Plant cover increased over time for all treatments from 44.7% in 2001 to 71% in 2005. This response was consistent across all except for the 30:1 treatment, which showed a slight decrease in the final year (65+/-11%). Volunteer species and evidence of animal grazing were observed in all amended plots. Results indicate that a C:N ratio>/=20:1 increased species diversity.     

Detecting ozone and demonstrating its phytotoxicity in forested areas of Poland: a pilot study

Ambient concentrations of ozone (O(3)) were measured and O(3) phytotoxicity to tobacco (Nicotiana tabacum L.) was demonstrated in several forest locations in Poland during a pilot study from July-October, 1991. At southern and central locations in Poland, the 24-hour average O(3) concentrations measured with a UV absorption photometer were in the range of 32-55 ppb, and the corresponding 1-hour maxima in the range of 39-83 ppb. At these locations longer period (four to fifteen days) average concentrations were determined using O(3) passive samplers (DGA, Inc.) and were reaching 60 ppb, while at Bialowieza in eastern Poland O(3) concentrations averaged less than 40 ppb. In Szarow, near the Niepolomice Forest in southern Poland, 1-hour O(3) maxima estimated from the data obtained using passive samplers were about 105 ppb in early September. At several locations in southern and central Poland, extensive O(3) injury was determined on O(3)-sensitive Bel W-3 tobacco plants; such injury did not occur in the Bialowieza Forest of eastern Poland. The results of this pilot study indicate that O(3) is present at phytotoxic levels in southern and central Poland.     

Decolourization and removal of some organic compounds from olive mill wastewater by advanced oxidation processes and lime treatment

Background Olive mill wastewater (OMW) generated by the olive oil extracting industry is a major pollutant, because of its high organic load and phytotoxic and antibacterial phenolic compounds which resist biological degradation. Mediterranean countries are mostly affected by this serious environmental problem since they are responsible for 95% of the worldwide oliveoil production. There are many methods used for OMW treatment, such as adsorption, electro coagulation, electro-oxidation, biological degradation, advanced oxidation processes (AOPs), chemical coagulation, flocculation, filtration, lagoons of evaporation and burning systems, etc. Currently, there is no such economical and easy solution. The aim of this study was to evaluate the feasibility of decolourization and removal of phenol, lignin, TOC and TIC in OMW by UV/H₂O₂ (AOPs). The operating parameters, such as hydrogen peroxide dosage, times, pH, effect of UV and natural sunlight were determined to find the suitable operating conditions for the best removal. Moreover, there is no study reported in the literature related to the use of UV/H₂O₂ and lime together in OMW treatment. Methods OMW was obtained from an olive-oil producing plant (Muğla area of Turkey) which uses a modern production process. No chemical additives are used during olive oil production. This study was realised by using two different UV sources, while taking the time and energy consumption into consideration. These two sources were mercury lamps and natural sunlight. Before starting AOPs experiments, one litre of OMW was treated by adding lime until a pH of 7.00. Then, 100 ml was taken from each sample, and 1 to 10 ml of a 30% H₂O₂ (Riedel-deHaen) solution was added. These solutions in closed vessels were laid in the natural sunlight for a week and their compositions and colour changes were analysed daily by UV-Vis spectrophotometer. At the end of the one-week period, they were treated with lime. In this study, the effect of changes in the initial pH, times and H₂O₂ concentrations on removal was investigated. At the end of all experiments, changes in colour, phenol, lignin, TOC and TIC concentrations were analysed according to standard methods. Results and Discussion In the samples exposed to natural sunlight and having an H₂O₂/OMW ratio of 3 ml/100 ml, a significant colour removal was achieved approximately 90% of the time at the end of 7 days. When the same samples were treated with lime (pH: up to 7), 99% efficiency was achieved. When phenol and lignin removals were examined in the same concentration, phenol and lignin removal were found 99.5%, 35%, respectively. However, for maximum lignin removal, more use of H₂O₂ (10 ml H₂O₂/100 ml OMW) was found to be necessary. Under these conditions, it was found that lignin can be removed by 70%, but to 90% with lime, at the end of a seven-day period. Rate constants obtained in the experiments performed with direct UV were found to be much higher than those of the samples exposed to natural sunlight (k^a _lignin = 0.3883 ≫ k^b _lignin = 0.0078; k^a _phenol = 0.5187 ≫ k^b _phenol = 0.0146). Moreover, it should be remembered in this process that energy consumption may induce extra financial burden for organisations. Conclusions It was found, in general, that colour, lignin, total organic carbon and phenol were removed more efficiently from OMW by using H₂O₂ UV and lime OMW. Moreover, in the study, lime was found to contribute, both initially and after radical reactions, to the efficiency to a great extent. Recommendations and Perspectives Another result obtained from the study is that pre-purification carried out with hydrogen peroxide and lime may constitute an important step for further purification processes such as adsorption, membrane processes, etc.     

Detoxification of semisolid olive-mill wastes and pine-chip mixtures using Phanerochaete flavido-alba

Semisolid olive-mill residues, pine chips, and mixtures of both residues contain phytotoxic components capable of inhibiting germination and vegetative growth in plants. Solid-state cultures of Phanerochate flavido-alba on pine chips or mixtures of both residues reduce these phytotoxic effects in fermented substrates. The phenol and lipid contents in cultures detoxified by this fungus also decreases.     

Raw and fungal-treated olive-mill wastewater effects on selected parameters of lettuce (Lactuca sativa L.) growth--the role of proline

Olive-mill wastewater (OMW) constitutes a major agricultural waste stream for which disposal is associated with significant environmental repercussions. No data are available on the effects of biotreated OMW and of the protective role of exogenously provided proline on plant physiology. In the present study, OMW was administered, either raw or previously treated by the white-rot fungus Pleurotus ostreatus, with or without proline amendment, to lettuce plants growing in sterilized sand. Biotreated OMW and proline addition resulted in significant moderation of OMW adverse effects on plant biomass production and ascorbic acid content, while their synergistic action alleviated the severe negative impact on net photosynthetic rate, water use efficiency and photosynthetic activity (Fv/Fo) invoked by the effluent. Moreover, biotreated OMW supplemented with proline, moderated the decrease in chlorophylls exerted by raw OMW, but it did not contribute at restoring carotenoids content. Restoration of plant transpiration was complete when biotreated OMW was used (with or without proline); proline alone mitigated the negative impact of OMW on photosynthetic efficiency (Fv/Fm and Fv'/Fm'). It seems that key photosynthetic parameters could be exploited as suitable evaluators of wastewater-induced plant toxicity, while plant fertigation with biotreated and/or supplemented OMW could be an interesting prospect in valorizing this effluent.