Effect of solids concentration on bacterial leaching of heavy metals from sewage sludge

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe2+ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

EDTA and HCl leaching of calcareous and acidic soils polluted with potentially toxic metals: remediation efficiency and soil impact

The environmental risk of potentially toxic metals (PTMs) in soil can be diminished by their removal. Among the available remediation techniques, soil leaching with various solutions is one of the most effective but data about the impact on soil chemical and biological properties are still scarce. We studied the effect of two common leaching agents, hydrochloric acid (HCl) and a chelating agent (EDTA) on Pb, Zn, Cd removal and accessibility and on physico-chemical and biological properties in one calcareous, pH neutral soil and one non-calcareous acidic soil. EDTA was a more efficient leachant compared to HCl: up to 133-times lower chelant concentration was needed for the same percentage (35%) of Pb removal. EDTA and HCl concentrations with similar PTM removal efficiency decreased PTM accessibility in both soils but had different impacts on soil properties. As expected, HCl significantly dissolved carbonates from calcareous soil, while EDTA leaching increased the pH of the acidic soil. Enzyme activity assays showed that leaching with HCl had a distinctly negative impact on soil microbial and enzyme activity, while leaching with EDTA had less impact. Our results emphasize the importance of considering the ecological impact of remediation processes on soil in addition to the capacity for PTM removal.     

Effect of Solids Concentration on Bacterial Leaching of Heavy Metals from Sewage Sludge

Abstract

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe²⁺ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

矿区炼金废渣的固化/稳定化处理

通过对金矿矿区炼金废渣的酸中和能力、净产酸量及浸出毒性实验，测定了废渣的产酸潜力及重金属砷、镉、铅、锌的总量和它们的浸出量。为了合理处置矿区炼金废渣，并为矿区重金属污染土壤的修复提供技术支持，采用石灰、粉煤灰、堆肥化污泥作为添加剂对废渣进行固化/稳定化处理；通过浸出毒性实验对固化/稳定化处理效果进行综合分析，试图寻求一种最佳的稳定剂。结果表明，无论是单独添加石灰、粉煤灰或者堆肥化污泥还是两两组合混合添加，样品浸出液的pH都有升高，As、Cd的浸出浓度都有明显下降，而且两两组合添加比单独添加的固化/稳定化处理效果更好。在两两组合添加中，粉煤灰混合堆肥化污泥的处理效果最好，浸出液的pH值达到7.82，As、Cd的浸出率分别下降72.0%和72.2%。说明粉煤灰混合堆肥化污泥处理炼金废渣效果最佳，同时具有以废治污的资源化生态效能。     

电镀污泥的热处理特性以及对金属回收的影响

焙烧-酸浸法可有效回收电镀污泥中的有价金属,而污泥的热处理特性是决定能否采用焙烧预处理的重要因素。研究了氧化焙烧和还原焙烧对污泥成分和金属浸出性的影响,并对焙烧前后的污泥进行了金属形态分析和X射线衍射(XRD)分析。结果表明,焙烧预处理实现了污泥减量和金属富集;ES1经氧化焙烧后金属浸出率接近原泥,Cu的浸出率达99%;ES2的还原焙烧效果优于氧化焙烧,特别是Cu的浸出率超过97%,XRD分析发现,还原焙烧过程中金属Cu被还原为铁铜合金;2种焙烧均造成了ES3中目标金属Ni的浸出率的降低;金属浸出性的下降与残渣态的形成有关。     

复合酸化剂对电镀污泥中铬、铜的去除效果

以电镀加工厂产生的污水污泥作为主要研究对象,研究了柠檬酸、硝酸、过氧化氢为复合酸化剂,Fe3+为增效剂对电镀污泥中铬和铜的去除效果,考察了酸化剂的浓度、反应时间、摇床转速、污泥pH、Fe3+浓度等因素对污泥中重金属去除效率的影响。结果表明:在室温下,含0.15 mol/L柠檬酸、1.5%过氧化氢、0.25 mol/L硝酸的复合酸化剂与增效剂2.0g/L Fe3+溶液共同处理污泥,固液比为1∶10,以150 r/min的转速振荡4 h,对污泥中Cr的去除效率达到80.02%,Cu的去除效率可达到92.89%,使污泥中残留Cr、Cu含量均符合国家污泥农用标准。     

Microbial acidification and pH effects on trace element release from sewage sludge

Leaching of sludge-borne trace elements has been observed in experimental and field studies. The role of microbial processes in the mobilization of trace elements from wastewater sludge is poorly defined. Our objectives were to determine trace element mobilization from sludge subjected to treatments representing microbial acidification, direct chemical acidification and no acidification, and to determine the readsorption potential of mobilized elements using calcareous sand. Triplicate columns (10-cm diameter) for incubation and leaching of sludge had a top layer of digested dewatered sludge (either untreated, acidified with H2SO4, or limed with CaCO3; all mixed with glass beads to prevent ponding) and a lower glass bead support bed. Glass beads in the sludge layer, support layer or both were replaced by calcareous sand in four treatments used for testing the readsorption potential of mobilized elements. Eight sequential 8-day incubation and leaching cycles were operated, each consisting of 7.6 d of incubation at 28 degrees C followed by 8 h of leaching with synthetic acid rain applied at 0.25 cm/h. Leachates were analyzed for trace elements, nitrate and pH, and sludge layer microbial respiration was measured. The largest trace element, nitrate and S losses occurred in treatments with the greatest pH depression and greatest microbial respiration rates. Cumulative leaching losses from both microbial acidification and direct acidification treatments were > 90% of Zn and 64-80% of Cu and Ni. Preventing acidification with sludge layer lime or sand restricted leaching for all trace elements except Mo. Results suggested that the primary microbial role in the rapid leaching of trace elements was acidification, with results from direct acidification being nearly identical to microbial acidification. Microbial activity in the presence of materials that prevented acidification mobilized far lower concentrations of trace elements, with the exception of Mo. Trace elements mobilized by acidification were readsorbed by calcareous sand when present.     

微生物沥浸法去除底泥中的重金属

以硫酸亚铁盐为底物,培养以氧化亚铁硫杆菌为主要菌种的土著沥滤微生物,采用批式方法对湘江长沙段底泥进行微生物沥浸实验。实验结果表明,底物投加量与底泥固体浓度比(Sd/Sc)为1.5时已能满足底泥的微生物沥浸要求,进一步研究发现底泥固体浓度为13%、底物投加量为19.5 g/L、沥浸时间为6 d时,底泥中超标重金属Cd、Zn和Cu的去除率可分别达到83.1%、75.3%和61.2%;沥浸后底泥中大部分重金属以残渣态存在,且含量低于农用污泥中污染物控制标准,其中硫化物有机结合态Cu浸出较Zn、Cd需更低的pH,且Cu以间接机理浸出为主;以Fe2+为底物的沥浸体系中,黄铁矾的重吸附或共沉淀是沥浸实验后期重金属浸出率下降的原因之一。     

Stabilization of heavy metals in municipal sewage sludge by freeze–thaw treatment with a blend of diatomite,FeSO4, and Ca(OH)2

In this work, the effects of diatomite with 15% FeSO₄?7H₂O and 7.5% Ca(OH)₂ on sludge stabilization were investigated using batch leaching tests. The influence of cell rupture caused by freezing and thawing on stabilization was also evaluated. The results indicated that the optimal diatomite percentage was 2%. Cell rupture by freezing and thawing reduced heavy metal leachability, followed by cell death and decrease of organic groups. The concentration of heavy metals in sludge leachate increased after cell rupture, indicating that the heavy metal leachability was reduced after freezing and thawings. Moreover, the stabilization effects were generally improved after freezing and thawing. As compared with the stabilization of the original sludge, the unstable fractions decreased and the residual fractions of the heavy metals increased in the stabilized sludge after cell rupture.

Implications: This study developed a method to stabilize heavy metals in municipal sewage sludge. Diatomite combined with FeSO₄·7H₂O and Ca(OH)₂ improved the treatment of sewage sludge contaminated by heavy metals. Cell lysis by freeze–thaw treatment reduced the risk of leaching heavy metals caused by cell death and decreased major organic groups in the sludge.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.     

污泥中重金属的去除及回收试验

论述了利用离子交换技术循环使用柠檬酸去除污泥中重金属,并置换回收重金属的适宜工艺条件.经柠檬酸处理后,污泥中90%以上的重金属被去除;柠檬酸处理液中的重金属用离子交换法回收,考察了树脂种类、流速、操作方式等因素对离子交换、再生效果的影响;在适宜工艺条件下,重金属的交换率均为100%,而洗脱率均接近90%;柠檬酸及离子交换树脂循环使用,重金属也得到回收,降低了处理成本.     

Remediation of heavy metal polluted sediment by suspension and solid-bed leaching: estimate of metal removal efficiency

Remediation of heavy metal polluted sediment by extracting the metals with sulfuric acid can be performed as follows: abiotic suspension leaching, microbial suspension leaching, abiotic solid-bed leaching, and microbial solid-bed leaching. Abiotic leaching means that the acid is directly added, while microbial leaching means that the acid is generated from sulfur by microbes (bioleaching). These four principles were compared to each other with special emphasis on the effectiveness of metal solubilization and metal removal by subsequent washing. Abiotic suspension leaching was fastest, but suspending the solids exhibits some disadvantages (low solid content, costly reactors, permanent input of energy, high water consumption, special equipment required for solid separation, large amounts of waste water, sediment properties hinder reuse), which prevent suspension leaching in practice. Abiotic solid-bed leaching implies the supply of acid by percolating water which proceeds slowly due to a limited bed permeability. Microbial solid-bed leaching means the generation of acid within the bed and has been proven to be the only principle applicable to practice. Metal removal from leached sediment requires washing with water. Washing of solid beds was much more effective than washing of suspended sediment. The kinetics of metal removal from solid beds 0.3, 0.6 or 1.2m in height were similar; when using a percolation flow of 20lm(-2)h(-1), the removal of 98% of the mobile metals lasted 57-61h and required 8.5, 4.2 or 2.3lkg(-1) water. This means, the higher the solid bed, the lower the sediment-mass-specific demand for time and water.     

电镀污泥回收重金属的新工艺

合理、经济地处理混合电镀污泥,回收其中有价值的金属具有重要意义。以不同的酸作为浸出剂对电镀污泥中的金属进行了浸出效果实验。结果表明,在相同条件下,各酸的浸出效果顺序为:硫酸>盐酸>王水>硝酸;液体水与固体电镀污泥比为3,干污泥为5 g,硫酸加入量为15 mL,时间1 h条件下,混合电镀污泥中金属铜锌的浸出率最大,达到97.38%。分别采用铁和铁锰合金还原剂常温还原低熔点重金属离子铜、锌,浸出液中99%以上含量的铜、锌沉淀,使低熔点重金属与黑色金属铁、锰、铬有效分离。低熔点混合重金属可以用来做铜合金添加剂使用,最后沉淀的混合黑色金属氢氧化物处理后可以用来做炼钢合金添加剂使用。     

Environmental assessment of different advanced oxidation processes applied to a bleaching Kraft mill effluent

Basic research on remediation of polluted sediment by leaching has, to date, been carried out exclusively with suspended material. For economic reasons, only solid-bed leaching is applicable to large-scale processes. Abiotic and microbial solid-bed leaching were comparatively studied in a percolator system using ripened and therefore permeable heavy metal polluted river sediment. In the case of abiotic leaching, sulfuric acid was supplied to the sediment by circulating water; the lower the pH of the percolating water, the higher the percolation flow, and the lower the solid-bed height was, the faster the heavy metals were solubilized. However, the pH and percolation flow are subjected to restrictions: strongly acidic conditions result in dissolution of mineral components, and the percolation flow must not exceed the bed permeability. And a high solid bed is an economic requirement. In the case of bioleaching, elemental sulfur added to the sediment was oxidized to sulfuric acid within the package which, in turn, solubilized the heavy metals. Here, the percolation flow and the solid-bed height did not affect the rate of metal solubilization. Solid-bed leaching on a larger scale will thus be much more efficient applying bioleaching with sulfur as the leaching agent than abiotic leaching with sulfuric acid.     

Assessment of a sewage sludge treatment on cadmium, copper and zinc bioavailability in barley, ryegrass and earthworms

The toxicity and bioavailability of metals were assessed to verify the efficiency of a new chemical leaching process (METIX-AC) to minimize the risk of metals found in municipal sewage sludge. For this purpose, sludge samples were spiked with cadmium, copper and/or zinc before being treated using METIX-AC. The sludge decontamination resulted in a removal of spiked metals (79-89%), in a decrease of the more labile fractions, and in a corresponding increase of the residual fraction. The toxicity observed after exposure of two plant species, barley (Hordeum vulgare) and ryegrass (Lolium perenne), and a terrestrial invertebrate, Eisenia andrei, to sludge-soil mixtures, disappeared after treatment, although the adverse effects were minor before treatment. The sludge treatment also significantly decreased the bioaccumulation of cadmium, copper, and zinc in the exposed species. For cadmium, maximum tissue concentrations of 0.45+/-0.08 mg/kg in barley, 0.79+/-0.27 mg/kg in ryegrass, and 21.82+/-1.85 mg/kg in earthworm exposed to sludge before treatment decreased after treatment to values similar to those observed with negative controls.     

Removal of heavy metals from anaerobically digested sewage sludge by isolated indigenous iron-oxidizing bacteria

The removal of heavy metals (Cr, Cu, Zn, Ni and Pb) from anaerobically digested sludge from the Yuen Long wastewater treatment plant, Hong Kong, has been studied in a batch system using isolated indigenous iron-oxidizing bacteria. The inoculation of indigenous iron-oxidizing bacteria and the addition of FeSO4 accelerated the solubilization of Cr, Cu, Zn, Ni and Pb from the sludge. pH of the sludge decreased with an increase in Fe2+ concentrations and reached a low pH of 2-2.5 for treatments receiving both bacterial inoculation and FeSO4. After 16 days of bioleaching, the following heavy metal removal efficiencies were obtained: Cr 55.3%, Cu 91.5%, Zn 83.3%, Ni 54.4%, and Pb 16.2%. In contrast, only 2.6% of Cr, 42.9% of Cu, 72.1% of Zn, 22.8% of Ni and 0.56% of Pb were extracted from the control without the bacterial inoculation and addition of FeSO4. The residual heavy metal content in the leached sludge was acceptable for unrestricted use for agriculture. The experimental results confirmed the effectiveness of using the isolated iron-oxidizing bacteria for the removal of heavy metals from sewage sludge.     

污泥活性炭对复合染料的脱色及其重金属浸出毒性

用自制的污泥活性炭处理亚甲基蓝与酸性品红组成的染料废水,研究了pH、吸附时间、温度等因素对复合组分染料废水脱色率的影响,测试分析了污泥活性炭在处理亚甲基蓝与酸性品红复合组分染料废水过程中的重金属浸出毒性。结果表明:与处理单一组分染料废水相比较,处理复合染料废水时pH的影响较为复杂,2种染料在污泥活性炭上存在竞争吸附,但是污泥活性炭对复合组分染料的脱色效果较好。污泥活性炭对复合染料的吸附过程符合Langmuir型吸附。在处理染料废水的过程中,污泥活性炭中的重金属镉、锌及铬会浸出,重金属镉、锌的浸出浓度符合国家标准,但铬的浸出浓度已接近国家标准上限。     

鼠李糖脂对剩余污泥中铜和镍的去除

采用批次淋洗的方法研究了鼠李糖脂浓度、pH、淋洗时间、提取次数以及重金属形态对剩余污泥中Cu和Ni去除效果的影响。结果表明,随着鼠李糖脂浓度的增加,2种重金属的去除率增加,且鼠李糖脂在碱性条件下对Cu和Ni的去除效果较好,最高去除率可分别高达80.77%和46.74%;随着振荡时间和提取次数的增加,Cu和Ni的去除率随之增加,并明显高于去离子水的提取;对污泥重金属形态进行分析发现,鼠李糖脂能有效去除酸提取态的Cu和Ni。研究结论可为剩余污泥的资源化而产生重金属安全隐患问题提供解决的参考方案和奠定理论基础。     

低温下ZCS工艺和改进式ZCS工艺脱氮效率研究及微生物特性分析

考察冬季低温下沸石联合生物吸附再生工艺和改进式沸石联合生物吸附再生工艺对城市污水的脱氮效率,结果表明在HRT为3.5 h下,ZCS工艺出水氨氮为11.65 mg/L,总氮高于20 mg/L.而相同条件下MZCS工艺氨氮出水为5.45 mg/L,总氮去除率比原ZCS工艺提高了11%,均值为16.8 mg/L.通过聚合酶链式技术,变性梯度凝胶电泳和电镜扫描技术发现两工艺微生物多样性、丰度高于传统活性污泥法,兼具活性污泥法和生物膜法的微生物特性.     

Utilization of fly ash to improve the quality of the acid mine drainage generated by oxidation of a sulphide-rich mining waste: column experiments

The production of Acid Mine Drainage (AMD) as a result of the oxidative dissolution of sulphides is one of the main pollution problems affecting natural watercourses in mining environments with sulphide-rich residues. In this work, the generation of AMD was prevented by means of the addition of fly ash to sulphide-rich residues in non-saturated column experiments. A column experiment filled with a pyrite-rich sludge with artificial irrigation leached acid drainages (pH approx. 2) containing high concentrations of sulphate, iron and other metals. However, non-saturated column experiments filled with pyritic-rich sludge and fly ash drained leachates characterized by alkaline pH (pH up to 10), low sulphate concentration, and lack of iron and other metals in solution. The pyrite oxidative dissolution at high pH, as a consequence of the leaching of fly ash, favours the metal precipitation inside the column (mainly iron), the coating of pyrite grains, and the attenuation of the oxidation process, resulting in a great improvement in the quality of the leachates.