微库仑法测定新疆棉浆粕企业废水中可吸附有机卤素AOX

建立微库仑滴定法测定水质中可吸附有机卤素AOX的方法,考察3种活性炭柱对于空白的影响。实验结果表明,AOX的检出限为2.19μg/L,相对标准偏差为2.80%,纯水中高、中、低加标回收率在92.5%~107%,新疆棉浆粕企业废水中加标回收率为96.0%~101%。实验室空白也只有新购开封的耶拿原装活性炭小柱能满足标准要求的空白值(<30μg/L)。     

废水总量控制监测中主要污染物的采样技术研究

对总量控制监测中主要污染物ＣＯＤｃｒ、Ｐｂ、Ｃｄ在废水中的分布规律及采样点位布设进行了研究,在此基础上,提出了采用采样点位优化选择的办法以提高废水样品的空间代表性。     

饮食业排放废水中COD的监测分析

采用分层随机抽样方法对盐城市城区饮食业排放废水中COD浓度进行了监测，并对监测数据进行了统计分析结果表明，本方法的抽样误差较小，监测结果可以用于对城区饮食业的环境管理。     

火焰原子吸收光度法测定废水中总铬

阐述了硝酸－高氯权消解、火焰原子吸收法直接测定工业废水中总铬。方法特征度０．０５４ｍｇ／Ｌ（１％吸收）,检测限０．０３６ｍｇ／Ｌ,加标回收率９６％～１０２％,相对标准左１％～１７％。     

医院废水的连续监测及存在问题探讨

对宁波市7家市属医院废水进行了一年4次的连续监测,发现7家医院废水均严重超标.造成医院废水严重超标的原因有4个方面.同时还探讨了监测规范中存在的三个主要问题,提出了解决办法.文章对南方城市的医院废水监测具有一定的典型性.     

废水排放口固定监测频次下监测时刻的优化

对于有排放规律的排放口,可通过曲线拟合等方法找出其变化规律的控制点并对控制点进行监测,然后通过数值计算,求出它的排放总量,这样可减少监测工作量.但对于排放规律较复杂的排放口,其变化规律的监测点较多,监测频次仍较高,企业难以承受.另外,有些排放口虽有排放规律,但不明显,即控制点的数据较离散,波动较大,对这种情况若用控制点的数值来计算排放总量,势必导致较大的误差.     

废水治理工程验收监测的若干问题

针对废水治理工程验收监测存在的问题，提出了制定监测方案，建立企业污染设施管理制度和验收监测与污染监督监测相结合等具体解决问题的办法，确立为企业服务的思想。     

餐饮业废水生化需氧量监测的探讨

探讨了餐饮业废水生化需氧量（ＢＯＤ５）样品的采集及分析方法。指出通过连续监测，掌握排放规律是保证样品代表性的关键，对大批量样品可采用图解法测定ＢＯＤ５。     

废水中六价铬测定的预处理

通过多年对含铬废水的监测,总结出对不同行业, 不同性质的含铬废水在监测前采用不同的予处理技术,以期得到准确可靠２的监测数据,为环境管理提供高效服务。     

Canadian Environmental Effects Monitoring: Experiences with Pulp and Paper and Metal Mining Regulatory Programs

In Canada, Environmental Effects Monitoring (EEM) programs exist within two regulations: the Pulp and Paper Effluent Regulations and the newMetal Mining Effluent Regulations under the Canadian Fisheries Act. EEM provides a biological, effects-based feedback loop to assess the effectiveness of technology-based regulations in protecting receiving environments. The promulgation of the Pulp and Paper Effluent Regulations, in 1992, represented a significant step forward in the Canadian regulatory approach by incorporating directly into a regulation a requirement to assess the effects of effluent discharges on receiving environments using proven scientific monitoring methodologies. Similarly, an assessment of the aquatic impacts of mines resulted in recommendations to amend the Metal Mining Effluent Regulations, recently promulgated in 2002, and includes an EEM program as a science-based feedback loop. As such, these regulations recognize the possibility that national, technology-based standards may not necessarily protect all receiving environments because of the diversity and variability of both discharges and receiving sites across the country. Since that time, EEM has improved its flexibility by considering both advances in science and the uniqueness of monitoring sites across Canada to allow the most appropriate and cost-effective monitoring approaches at each site while maintaining national consistency. This paper discusses the use of monitoring under two Canadian regulations to assess effects on aquatic ecosystems. As well, the National EEM approach to maintaining up-to-date scientific practices in a national regulatory program is discussed using examples.     

Effects of Polluting Soil with Cassava Mill Effluent on the Bacteria and Fungi Populations of a Soil Cultivated with Maize

The study was carried out to investigate the effects of application of cassava mill effluent on bacteria and fungi types and population in a soil grown to maize (Zea Mays L.) Microbial populations were determined before pollution of soil with cassava mill effluent, six weeks after pollution with effluent and at the end of the experiment. Results obtained showed that bacteria and fungi populations increased with time as rates of pollution increased. It was also observed that some bacteria present in the soil at the beginning of the experiment and up to the sixth week after pollution with effluent became extinct at the end of the experiment.     

广东省第三产业排污系数(第一批)的确定

由于宾馆、酒楼、发廊、桑拿、医院等第三产业企业数量多,规模较小,监管成本相对高,导致缺少监测.排污收费改革后,排污者应如实申报排污量,环保部门应按照监测结果或物料衡算方法核定排污量和排污费.为了减少成本和争议,简便科学地计算排污量,广东省环保局制定了排污系数.     

EOX concentrations in sediment in the part of the Bothnian Bay affected by effluents from the pulp and paper mills at Kemi, Northern Finland

The Bothnian Bay, which is the northernmost part of the Gulf of Bothnia in Northern Finland, is affected by effluents discharged from point sources such as the pulp and paper mills of Stora Enso Oyj Veitsiluoto Mill and Oy Metsä-Botnia Ab Kemi Mill at Kemi, and the Kemi municipal sewage plant, as well as the River Kemijoki. In this paper we discuss, how modernisation of the wastewater treatment plant at the mills, and process investments in the Best Available Techniques (BAT) for effluent treatment, have decreased the effluent discharges of biological oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (Tot-P), total nitrogen (TOT-N), total suspended solids (TSS) and adsorbable organically bound halogens (AOX) from the mills since 1988. One specific aim of the study was to determine the EOX (Extractable Organically Bound Halogens) concentrations in bottom sediment of the Bothnian Bay in order to assess whether the EOX concentrations reflect the reduction in discharges of chlorinated compounds. According to the monitoring program carried out every third year between 1997–2006, the decreasing trend in EOX concentrations in the top 2 cm of the bottom sediment reflect the decrease in organochlorine discharges (AOX) from the mills. In 1997 the EOX concentrations in bottom sediment varied between 3–70 μg of Cl g^?1 (dry weight), and in 2006 between 3.3–32 μg of Cl g^?1 (dry weight).     

Assessment of water pollution in different bleaching based paper manufacturing and textile dyeing industries in India

Paper industries using different raw materials such as hard wood, bamboo, baggase, rice-straw and waste papers and bleaching chemicals like chlorine, hypochlorite, chlorine dioxide, hydrogen peroxide, sulphite and oxygen were studied to estimate organic pollution load and Adsorbable Organic Halides (AOX) per ton of production. The hard wood based paper industries generate higher Chemical Oxygen Demand (COD) loads (105–182 kg t⁻¹) and Biochemical Oxygen Demand (BOD) loads (32.0–72 kg t⁻¹) compared to the agro and waste paper based industrial effluents. The bleaching sequences such as C–EP–H–H, C–E–H–H, C–E–Do–D1 and O–Do–EOP–D1 are adopted in the paper industries and the molecular elemental chlorine free bleaching sequence discharges low AOX in the effluent. The range of AOX concentration in the final effluent from the paper industries was 0.08–0.99 kg t⁻¹ of production. Water consumption was in the range of 100–130 m³ t⁻¹ of paper production for wood based industries and 30–50 m³ for the waste paper based industries. Paper machine effluents are partially recycled after treatment and pulp mill black liquor are subject to chemical recovery after evaporation to reduce the water consumption and the total pollution loads. Hypochlorite bleaching units of textile bleaching processes generate more AOX (17.2–18.3 mg l⁻¹) and are consuming more water (45–80 l kg⁻¹) whereas alkali peroxide bleaching hardly generates the AOX in the effluents and water consumption was also comparatively less (40 l kg⁻¹ of yarn/cloth).     

遥感监测土壤湿度综述

遥感技术具有大面积同步观测,时效性、经济性强等特点,为大面积动态监测土壤湿度提供了可能。本文对近年来国内外遥感监测土壤湿度的理论、方法的发展和应用进行了回顾,重点介绍了目前已经比较成熟和广泛应用的基于可见光与热红外波段的植被指数方法以及在干旱、半干旱地区的应用,通过对比分析了各种遥感监测方法的优缺点,指出了土壤湿度遥感监测方法存在的不足,展望了土壤湿度遥感监测方法的发展趋势。     

核电厂放射性流出物监测工作探讨

简述了放射性流出物监测的重要性,分析了我国核电厂放射性流出物监测中存在问题,探讨了借鉴国际原子能机构安全及相关标准开展我国核电厂放射性流出物监测的管理机制、监测方案、监测报告和质量保证等具体要求与方法,并提出提升技术基础能力、完善法规标准、加强监管力度的建议.     

废水中可吸附有机卤化物的来源、测定方法及去除技术的研究进展

简述了废水中可吸附有机卤化物(AOX)的定义、来源和危害,以及国内外废水中AOX排放的相关法规。详细介绍了微库仑法、中子活化法、三维荧光法等AOX测定方法,以及物理法、化学法、生物法3种AOX去除技术的研究进展。并对工业废水中AOX的检测、表征及其针对性处理提出了今后的研究方向。     

工业油烟的监测

介绍工业油烟测定原理、采样步骤、样品测定、计算等。