Behavior of bensulfuron-methyl in an agricultural alkaline soil

A field experiment to determine the available bensulfuron-methyl (BSM) in the upper soil layer was conducted in an agricultural area in the South of Spain. To facilitate herbicide analysis, two application rates were employed, 200 g ha^?1 and 5 kg ha^?1. Samples of upper soil and soil solution were collected. Soil solution was sampled by means of metallic samplers, placed at a depth of 35 cm. In the plots receiving the lower dose ceramic suction, porous cups were also installed. Results from soil solution samples showed that the maximum BSM concentration was found after 8-10 days for the high irrigation supply (945 mm) and after 18-25 days for the lower irrigation regime (405 mm). The mathematical model FOCUSPELMO 1.1.1 was applied to interpret the data obtained in the field experiments. In general, there was a reasonable agreement between experimental and simulated data for soil samples, although the model did not acceptably predict herbicide concentrations in water soil samples. Ceramic cups sampled a higher soil water volume and more frequently than did the metallic samplers. However some variable results were attributed to preferential flow.     

Behavior of bensulfuron-methyl in an agricultural alkaline soil

A field experiment to determine the available bensulfuron-methyl (BSM) in the upper soil layer was conducted in an agricultural area in the South of Spain. To facilitate herbicide analysis, two application rates were employed, 200 g ha(-1) and 5 kg ha(-1). Samples of upper soil and soil solution were collected. Soil solution was sampled by means of metallic samplers, placed at a depth of 35 cm. In the plots receiving the lower dose ceramic suction, porous cups were also installed. Results from soil solution samples showed that the maximum BSM concentration was found after 8-10 days for the high irrigation supply (945 mm) and after 18-25 days for the lower irrigation regime (405 mm). The mathematical model FOCUSPELMO 1.1.1 was applied to interpret the data obtained in the field experiments. In general, there was a reasonable agreement between experimental and simulated data for soil samples, although the model did not acceptably predict herbicide concentrations in water soil samples. Ceramic cups sampled a higher soil water volume and more frequently than did the metallic samplers. However some variable results were attributed to preferential flow.     

Effect of soil pH on availability to crops of metals in sewage sludge-treated soils. I. Nickel, copper and zinc uptake and toxicity to ryegrass

The effect of soil pH value on concentrations of Ni, Cu and Zn in ryegrass grown on two sludge-treated soils was examined under field conditions and the maximum permissible soil limit values for these elements were determined which prevent phytotoxicity in crops where sewage sludge is applied to agricultural soils with pH <6.0. Concentrations of all the elements in ryegrass decreased as simple linear functions of increasing soil pH and this response was consistent across the range of pH values measured (pH 4.2-7.0). The response of individual elements tended to differ though, with Cu being less sensitive to changing pH conditions compared with Zn and Ni which responded in a similar manner. The yield of ryegrass also increased with increasing soil pH value probably due to the effects on Zn uptake as the crop content of Zn exceeded known upper critical tissue concentrations for this element at both sites. The proportional change in metal content of ryegrass at pH 5.0, 5.5 and 7.0 from tissue concentrations at pH 6.0 was calculated to determine the permissible soil concentration values on the basis of current maximum limits set by the Sludge Regulations in the UK for sludge-treated agricultural land at pH 6.0-7.0. The estimated permissible concentrations of Ni and Zn in soil corresponded with the regulatory values at the low pH ranges, but were substantially above the current soil limits at pH 7.0 indicating larger quantities of these elements could be safely applied under alkaline soil conditions. The estimated soil limits for Cu implied that the current Regulations were highly precautionary for this element.     

Modelling the impact of nitrogen deposition, climate change and nutrient limitations on tree carbon sequestration in Europe for the period 1900-2050

We modelled the combined effects of past and expected future changes in climate and nitrogen deposition on tree carbon sequestration by European forests for the period 1900-2050. Two scenarios for deposition (current legislation and maximum technically feasible reductions) and two climate scenarios (no change and SRES A1 scenario) were used. Furthermore, the possible limitation of forest growth by calcium, magnesium, potassium and phosphorus is investigated. The area and age structure of the forests was assumed to stay constant to observations during the period 1970-1990. Under these assumptions, the simulations show that the change in forest growth and carbon sequestration in the past is dominated by changes in nitrogen deposition, while climate change is the major driver for future carbon sequestration. However, its impact is reduced by nitrogen availability. Furthermore, limitations in base cations, especially magnesium, and in phosphorus may significantly affect predicted growth in the future.     

Soil amendments reduce trace element solubility in a contaminated soil and allow regrowth of natural vegetation

We tested the effects of three amendments (a biosolid compost, a sugar beet lime, and a combination of leonardite plus sugar beet lime) on trace element stabilisation and spontaneous revegetation of a trace element contaminated soil. Soil properties were analysed before and after amendment application. Spontaneous vegetation growing on the experimental plot was studied by three surveys in terms of number of taxa colonising, percentage vegetation cover and plant biomass. Macronutrients and trace element concentrations of the five most frequent species were analysed. The results showed a positive effect of the amendments both on soil chemical properties and vegetation. All amendments increased soil pH and TOC content and reduced CaCl(2)-soluble-trace element concentrations. Colonisation by wild plants was enhanced in all amended treatments. The nutritional status of the five species studied was improved in some cases, while a general reduction in trace element concentrations of the aboveground parts was observed in all treated plots. The results obtained show that natural assisted remediation has potential for success on a field scale reducing trace element entry in the food chain.     

Accumulating pollutants in conifer needles on an Atlantic island - a case study with Pinus canariensis on Tenerife, Canary Islands

Concentrations of potential pollutant elements Na, Cl, and S were investigated in needles of Pinus canariensis grown at 55 field plots in Tenerife. Microelement concentrations (including heavy metals) were measured at a subset of 18 plots. Na and Cl concentrations were high at low elevations (up to 8 mg g(-1) Cl and 5.5 mg g(-1) Na). Na/Cl ratio close to standard seawater indicated sea spray influence up to 1200 m a.s.l. Only at few plots, sulphur concentrations indicated possible pollutant impact. Cluster and correlation analyses identified a related group of V, As, Cr, Fe, Mo, Ni, Cu, Pb, and Al, possibly related to traffic exhaust aggregated with soil particles. Mainly north-eastern, lower elevated plots were exposed to those immissions, but metal concentrations were generally low compared to data from other studies. In conclusion, seawater and soil particles explained most of the element distribution pattern in pine needles in Tenerife, but strong indications for some effect of local sources of air pollutants were detected.     

Levels of PAHs in soil and vegetation samples from Tarragona County, Spain

The levels of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in 24 soil and 12 wild chard samples collected in Tarragona County (Catalonia, Spain), an area with an important number of chemical and petrochemical industries. Samples were also collected in urban/residential zones and in presumably unpolluted sites (control samples). In soils, the sum of the 16 PAHs ranged between 1002 and 112 ng/g (dry weight) for samples collected near chemical industries and unpolluted sites, respectively. With the exception of acenaphthylene, acenaphthene, anthracene and benzo[k]fluoranthene, no significant differences in the levels of the remaining PAHs were found among the different zones of sample collection. In chard samples, the highest value (sum of 16 PAHs) was observed in the residential area, followed by the industrial and the unpolluted zones, with concentrations of 179, 58 and 28 ng/g (dry weight), respectively. In general terms, the current PAH concentrations in soil and vegetation are lower than the levels reported in a number of investigations from different regions and countries. They are also below the maximum PAH concentrations allowed by the Catalan legislation for different uses of soil.     

Dissipation and runoff transport of metazachlor herbicide in rapeseed cultivated and uncultivated plots in field conditions

The environmental fate of metazachlor herbicide was investigated under field conditions in rapeseed cultivated and uncultivated plots, over a period of 225 days. The cultivation was carried out in silty clay soil plots with two surface slopes, 1 and 5 %. The herbicide was detectable in soil up to 170 days after application (DAA), while the dissipation rate was best described by first-order kinetics and its half-life ranged between 10.92 and 12.68 days. The herbicide was detected in the soil layer of 10–20 cm from 5 to 48 DAA, and its vertical movement can be described by the continuous stirred tank reactor (CSTR) in series model. Relatively low amounts of metazachlor (less than 0.31 % of the initial applied active ingredient) were transferred by runoff water. More than 80 % of the total losses were transferred at the first runoff event (12 DAA), with herbicide concentrations in runoff water ranging between 70.14 and 79.67 μg L⁻¹. Minor amounts of the herbicide (less than 0.07 % of the initial applied active ingredient) were transferred by the sediment, with a maximum concentration of 0.57 μg g⁻¹ (12 DAA), in plots with 5 % inclination. Finally, in rapeseed plants, metazachlor was detected only in the first sampling (28 DAA) at concentrations slightly higher than the limit of quantification; when in seeds, no residues of the herbicide were detected.

     

Element fluxes through European forest ecosystems and their relationships with stand and site characteristics

This paper describes a European wide assessment of element budgets, using available data on deposition, meteorology and soil solution chemistry at 121 Intensive Monitoring plots. Input fluxes from the atmosphere were derived from fortnightly or monthly measurements of bulk deposition and throughfall, corrected for canopy uptake. Element outputs from the forest ecosystem were derived by multiplying fortnightly or monthly measurements of the soil solution composition at the bottom of the root zone with simulated unsaturated soil water fluxes. Despite the uncertainties in the calculated budgets, the results indicate that: (i) SO4 is still the dominant source of actual soil acidification despite the generally lower input of S than N, due to the different behaviour of S (near tracer) and N (strong retention); (ii) base cation removal due to man-induced soil acidification is limited; and (iii) Al release is high in areas with high S inputs and low base status.     

Cadmium availability to wheat grain in soils treated with sewage sludge or metal salts

Grain Cd concentrations were determined in wheat (Triticum aestivum L.) grown in 1999, 2001 and 2003, at six sludge cake field experiments. Three of these sites also had comparisons with Cd availability from metal amended liquid sludge and metal salts. Grain Cd concentrations in all years and at all sites were significantly linearly correlated with NH4NO3 extractable Cd and soil total Cd (P<0.001). Soil extractability was greater in the liquid sludge and metal salt experiments than in the cake experiments, as were grain Cd concentrations. Across all the sites, NH4NO3 extractable soil Cd was no better at predicting grain Cd than soil total Cd. Stepwise multiple linear regression analysis showed that soil total Cd, pH and organic carbon were the only significant (P<0.001) variables influencing wheat grain Cd concentrations, explaining 78% of the variance across all field experiments (1408 plots). This regression predicted that the current UK soil total Cd limit of 3 mg kg(-1) was not sufficiently protective against producing grain above the European Union (EU) grain Cd Maximum Permissible Concentration (MPC) of 0.235 mg Cd kg(-1) dry weight, unless the soil pH was > 6.8. Our predictions show that grain would be below the MPC with > 95% confidence with the proposed new EU draft regulations permitting maximum total Cd concentrations in soils receiving sludge of 0.5 mg kg(-1) for soils of pH 5-6, 1 mg kg(-1) for soils of pH 6-7, and 1.5 mg kg(-1) for soils of pH > or = 7.     

Multi-criteria analysis for PM10 planning

To implement sound air quality policies, Regulatory Agencies require tools to evaluate outcomes and costs associated to different emission reduction strategies. These tools are even more useful when considering atmospheric PM10 concentrations due to the complex nonlinear processes that affect production and accumulation of the secondary fraction of this pollutant. The approaches presented in the literature (Integrated Assessment Modeling) are mainly cost-benefit and cost-effective analysis. In this work, the formulation of a multi-objective problem to control particulate matter is proposed. The methodology defines: (a) the control objectives (the air quality indicator and the emission reduction cost functions); (b) the decision variables (precursor emission reductions); (c) the problem constraints (maximum feasible technology reductions). The cause-effect relations between air quality indicators and decision variables are identified tuning nonlinear source–receptor models. The multi-objective problem solution provides to the decision maker a set of not-dominated scenarios representing the efficient trade-off between the air quality benefit and the internal costs (emission reduction technology costs). The methodology has been implemented for Northern Italy, often affected by high long-term exposure to PM10. The source–receptor models used in the multi-objective analysis are identified processing long-term simulations of GAMES multiphase modeling system, performed in the framework of CAFE-Citydelta project.     

A comparison of phytoremediation capability of selected plant species for given trace elements

In our experiment, As, Cd, Pb, and Zn remediation possibilities on medium contaminated soil were investigated. Seven plant species with a different trace element accumulation capacity and remediation potential were compared. We found good accumulation capabilities and remediation effectiveness of Salix dasyclados similar to studied hyperaccumulators (Arabidopsis halleri and Thlaspi caerulescens). We have noticed better remediation capability in willow compared to poplar for most of the elements considered in this experiment. On the contrary, poplar species were able to remove a larger portion of Pb as opposed to other species. Nevertheless, the removed volume was very small. The elements found in plant biomass depend substantially on the availability of these elements in the soil. Different element concentrations were determined in natural soil solution and by inorganic salt solution extraction (0.01 molL(-1) CaCl(2)). Extracted content almost exceeded the element concentration in the soil solution. Element concentrations in soil solution were not significantly affected by sampling time.     

Physiological and growth responses of differentially irrigated cotton to ozone

This study was conducted to determine the physiological and growth responses of cotton (Gossypium hirsutum L.) to the interaction of ozonee (O3) and drought stress. Cotton (cv SJ-2) was grown in open-top chambers in the field at three levels of soil water and exposed to charcoal-filtered air (CF), nonfiltered air (NF), and NF x 1.25, and NF x 1.5 ambient O3 concentrations in Riverside, CA, from June to October 1986. Ozone reduced carbon fixation an average of 74.6% in optimally watered (OW) plots, 63.4% in suboptimal (SO) plots, but only 19.3% in severely water-stressed (SS) plots. Leaf and stem biomass in OW and SO plots showed similar linear reductions in mass response to increased O3 concentrations, but SS plots showed no response to O3 except at the highest O3 treatment (seasonal 12-h O3 mean of 0.111 ppm 218 microm(-3)). These results showed that moderately water-stressed cotton had similar physiological and growth responses to O3 as well-watered plants, but severely water-stressed cotton showed little response to O3 at ambient O3 concentrations.     

Uncertainties in predicted ozone concentrations due to input uncertainties for the UAM-V photochemical grid model applied to the July 1995 OTAG domain

The photochemical grid model, UAM-V, has been used by regulatory agencies to make decisions concerning emissions controls, based on studies of the July 1995 ozone episode in the eastern US. The current research concerns the effect of the uncertainties in UAM-V input variables (emissions, initial and boundary conditions, meteorological variables, and chemical reactions) on the uncertainties in UAM-V ozone predictions. Uncertainties of 128 input variables have been estimated and most range from about 20% to a factor of two. 100 Monte Carlo runs, each with new resampled values of each of the 128 input variables, have been made for given sets of median emissions assumptions. Emphasis is on the maximum hourly-averaged ozone concentration during the 12–14 July 1995 period. The distribution function of the 100 Monte Carlo predicted domain-wide maximum ozone concentrations is consistently close to log-normal with a 95% uncertainty range extending over plus and minus a factor of about 1.6 from the median. Uncertainties in ozone predictions are found to be most strongly correlated with uncertainties in the NO₂ photolysis rate. Also important are wind speed and direction, relative humidity, cloud cover, and biogenic VOC emissions. Differences in median predicted maximum ozone concentrations for three alternate emissions control assumptions were investigated, with the result that (1) the suggested year-2007 emissions changes would likely be effective in reducing concentrations from those for the year-1995 actual emissions, that (2) an additional 50% NO_x emissions reductions would likely be effective in further reducing concentrations, and that (3) an additional 50% VOC emission reductions may not be effective in further reducing concentrations.     

Zinc, copper and nickel concentrations in soil extracts and crops grown on four soils treated with metalloaded sewage sludges

Sludges containing high concentrations of zinc, copper or nickel and an uncontaminated sludge were added to two sandy loams (pH 6.5 and 7.1), a heavy clay (pH 6.3) and a calcareous clay (pH 7.8) to give ten sludge treatments for each soil. The mixtures were incubated fallow, cropped continuously with clover, or cropped with barley and red beet in rotation for 21 months. The quantity of added metal either in the soil solution or extracted by 0.1m CaCl(2) depended on the metal loading, pH and soil cation exchange capacity, and changed with time after mixing soils and sludges. Crop metal concentrations, and the occurrence of metal-induced yield reductions, also depended on soil properties as well as metal loading. The best chemical extractant for predicting plant metal concentrations was 0.1m CaCl(2).     

Assessing the Impacts of Long-Range Sulfur and Nitrogen Deposition on Arctic and Sub-Arctic Ecosystems

For more than a decade, anthropogenic sulfur (S) and nitrogen (N) deposition has been identified as a key pollutant in the Arctic. In this study new critical loads of acidity (S and N) were estimated for terrestrial ecosystems north of 60° latitude by applying the Simple Mass Balance (SMB) model using two critical chemical criteria (Al/Bc = 1 and ANC_le = 0). Critical loads were exceeded in large areas of northern Europe and the Norilsk region in western Siberia during the 1990s, with the more stringent criterion (ANC_le = 0) showing the larger area of exceedance. However, modeled deposition estimates indicate that mean concentrations of sulfur oxides and total S deposition within the Arctic almost halved between 1990 and 2000. The modeled exceeded area is much reduced when currently agreed emission reductions are applied, and almost disappears under the implementation of maximum technically feasible reductions by 2020. In northern North America there was no exceedance under any of the deposition scenarios applied. Modeled N deposition was less than 5 kg ha⁻¹ y⁻¹ almost across the entire study area for all scenarios; and therefore empirical critical loads for the eutrophying impact of nitrogen are unlikely to be exceeded. The reduction in critical load exceedances is supported by observed improvements in surface water quality, whereas the observed extensive damage of terrestrial vegetation around the mining and smelter complexes in the area is mainly caused by direct impacts of air pollution and metals.     

Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: sustainability and risks

We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil.     

Factors affecting accumulation of thallium and other trace elements in two wild Brassicaceae spontaneously growing on soils contaminated by tailings dam waste

Thallium is a scarce, highly toxic element. There are several investigations that report Tl accumulation in plants of the family Brassicaceae. These plants could pose a risk in areas where Tl is present at higher concentrations than normal soils. The present study reports analyses of two wild Brassicaceae, Hirschfeldia incana and Diplotaxis catholica, growing spontaneously at five sampling sites moderately polluted with Tl and other trace elements in the Green Corridor of the Guadiamar river, Seville, S. Spain. In general, trace element content was unremarkable in all part plants, despite the concentrations present in soil. Thallium was the only element whose concentration in both plant species was above normal for plants (maximum values of 5.00 mgkg(-1) in H. incana flowers). There were significant positive correlations between total Tl in soil and Tl in both plant species. Transfer Coefficients (TC) for all elements were, in general, <1 for both species, except for Tl in flowers and fruits at some sites. The highest Enrichment Factor (EF) was found for Tl in H. incana fruits (EF = 607) and D. catholica flowers (EF = 321). H. incana was studied in a previous growing season (2004) in the same area, although the rainfall was 3 times more than in the year of the present study (2005), giving a maximum Tl content of 46.5 mgkg(-1) in H. incana flowers. The data presented here show that Tl content of plants growing in semi-arid conditions can be significantly influenced by precipitation. In dry years, plant Tl accumulation may be significantly reduced.     

功能微生物对污染农田土壤中铅锌的溶出实验

用微生物修复重金属污染的土壤是当今的研究热点之一。试图寻找一类可以增加土壤中重金属铅、锌的可溶态的功能微生物,并研究该微生物在不同土壤含水率和不同投菌比条件下对铅、锌溶出作用的影响。最终筛选出符合条件的菌JK3,并发现当土壤含水率为35%,投菌比为0.15 mL/g土(菌液OD=1)时,土壤中铅和锌的可溶态增加量最多。其中,可溶态铅的含量由原来的0.49 mg/kg增加到了5.04 mg/kg,可溶态锌的含量由原来的2.23 mg/kg增加到了22.44mg/kg。该方法为后续用植物提取或化学淋洗等方法将土壤中的重金属彻底去除提供了可能。     

National baseline survey of soil quality in the Netherlands

To determine background values of the 252 chemical compounds listed in Dutch legislation, a survey was designed with the aim of estimating percentiles of the cumulative frequency distributions and areal fractions exceeding the former, legislative reference values. Sampling locations were selected by probability sampling, so that in estimating the target quantities no model assumptions on the spatial variation were required, and valid estimates could be obtained by design-based inference. Strata in random sampling were formed by overlaying an aggregated soil map and land use map. For most of the heavy metals the areal fraction with concentrations in the topsoil (0-10 cm) exceeding the reference value was smaller than the allowable maximum of 5%. For these compounds a background value was determined smaller than the reference value. Exceptions were V, Co, Ba and Cu, for which a background value was defined (slightly) larger than the reference value.